Approvals/Listings: See Victaulic Publication 10.01 for more details. Victaulic offers a variety of stainless steel fittings in types 304L and 316L stainless steel, ranging in size from ¾ to 12"/20 to 300mm. Standard offerings in stainless steel fittings include Schedule 10S and 40S wall thicknesses, with Schedule 5S fittings also available by contacting Victaulic. See section 1 starting on page 2 for Schedule 10S fitting information and section 2 starting on page 11 for Schedule 40S fitting information. Schedule 5S dimensions are equal to those of Schedule 10S, though weights are different. Please contact Victaulic for more information about Schedule 5S weights. Pressure ratings for stainless steel fittings are equivalent to the pressure rating of the coupling when installed on stainless steel pipe of equal wall thickness. Pressure ratings for ductile iron couplings approved for use on stainless steel pipe can be found in document 17.09. In order to achieve Victaulic specified product performance, the proper Victaulic roll grooving tool and corresponding Victaulic roll set must be selected. When roll grooving ANSI Schedule 5S or 10S Type 304L or 316L stainless steel, a Victaulic manufactured RX roll set is required. Review document 17.01 for more details. For specific details regarding ANSI/NSF 61 Certification for cold (+86°F/+30°C) and hot (180°F/82°C) potable water service for the stainless steel fittings described in this document, please visit www.nsf.org. Victaulic ® Stainless Steel Fittings 17.16 1 Fittings | Stainless Steel | Publication 17.16 victaulic.com Job/Owner System No. Location Contractor Submitted By Date Engineer Spec Section Paragraph Approved Date
18
Embed
Victaulic Stainless Steel Fittings - GARITEC · Victaulic offers a variety of stainless steel fittings in types 304L and 316L stainless steel, ranging in size from ¾ to 12"/20 to
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Approvals/Listings:
See Victaulic Publication 10.01 for more details.
Victaulic offers a variety of stainless steel fittings in types 304L and 316L stainless steel, ranging in size from ¾ to 12"/20 to 300mm. Standard offerings in stainless steel fittings include Schedule 10S and 40S wall thicknesses, with Schedule 5S fittings also available by contacting Victaulic. See section 1 starting on page 2 for Schedule 10S fitting information and section 2 starting on page 11 for Schedule 40S fitting information. Schedule 5S dimensions are equal to those of Schedule 10S, though weights are different. Please contact Victaulic for more information about Schedule 5S weights.
Pressure ratings for stainless steel fittings are equivalent to the pressure rating of the coupling when installed on stainless steel pipe of equal wall thickness. Pressure ratings for ductile iron couplings approved for use on stainless steel pipe can be found in document 17.09.
In order to achieve Victaulic specified product performance, the proper Victaulic roll grooving tool and corresponding Victaulic roll set must be selected. When roll grooving ANSI Schedule 5S or 10S Type 304L or 316L stainless steel, a Victaulic manufactured RX roll set is required. Review document 17.01 for more details.
For specific details regarding ANSI/NSF 61 Certification for cold (+86°F/+30°C) and hot (180°F/82°C) potable water service for the stainless steel fittings described in this document, please visit www.nsf.org.
Note: Fittings are optionally available in Sch. 5S for 3 – 12"/80 - 300mm.
90º & 45º Elbows:
1 – 2 ½"/25 – 65 mm and 76.1 mm:
Schedule 10S, Grade CF8M (Type 316 stainless steel)conforming to ASTM A 351/A 351M, A 743/A 743M and A 744/A 744M.
3 – 12"/80 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M.
22 ½º & 11 ¼º Elbows:
¾ – 12"/20 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M.
Tees:
1 – 2 ½"/25 – 65 mm and 76.1 mm:
Schedule 10S, Grade CF8M (Type 316 stainless steel)conforming to ASTM A 351/A 351M, A 743/A 743M and A 744/A 744M.
3 – 12"/80 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to A 240/A 240M.
Reducing Tees:
1 ½ x 1 ½ x ¾ – 2 ½ x 2 ½ x 2"/40 x 40 x 20 – 65 x 65 x 50 mm and 76.1 x 76.1 x 60.3 mm:
Schedule 10S, Type 304L or 316L segmentally welded stainless steel from ASTM A 312/A 312M pipe.
3 x 3 x ¾ – 12 x 12 x 10"/80 x 80 x 20 – 300 x 300 x 250 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Laterals:
¾ – 12"/80 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
True Wyes:
¾ – 12"/20 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Crosses:
¾ – 12"/20 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Adapter Nipples:
¾ – 12"/20 – 300 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from pipe conforming to ASTM A 312/A 312M.
Concentric Reducers:
1 ½ x ¾ – 2 ½ x 2"/40 x 20 – 65 x 50 mm and 76.1 x 76.1 x 60.3 mm:
Schedule 10S, Grade CF8M (Type 316 stainless steel) conforming to ASTM A 351/A 351M, A 743/A 743 M and A 744/A 744M.
3 x 1 – 12 x 10"/80 x 25 – 300 x 250 mm:
Schedule 10S, Type 304 or 316 stainless steel roll grooved from material conforming to ASTM A 403/A 403M.
Eccentric Reducers:
1 ½ x ¾ – 6 x 4"/40 x 20 – 150 x 100 mm:
Schedule 10S, Type 304L or 316L stainless steel roll grooved from material conforming to ASTM A 403/A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
3 3.500 No. 420 SS 3.75 3.180 88.9 95 1.44 4.500 No. 420 SS 4.50 4.9
100 114.3 114 2.2
139.7 mm 5.500 No. 420 SS 5.25 7.9139.7 133 3.6
165.1 mm 6.500 No. 420 SS 5.88 11.3165.1 149 5.1
6 6.625 No. 420 SS 5.88 11.7150 168.3 149 5.3
216 JIS 8.000 No. 420 SS 7.75 20.3216.3 197 9.2
8 8.625 No. 420 SS 7.75 20.4200 219.1 197 9.3
267 JIS 10.000 No. 420 SS 8.88 33.9267.4 226 15.4
10 10.750 No. 420 SS 8.88 34.4250 273.0 226 15.6
318 JIS 12.000 No. 420 SS 10.38 48.4318.5 264 22.0
12 12.750 No. 420 SS 10.38 52.4300 323.9 264 23.8
* No. 20 SS elbows are Schedule 10S, Type 304L or 316L stainless steel from A403CR/S9.
C to E
CtoE
No. 420 SS No. 20 SS
C to E
CtoE
Schedule 10S Weights and Dimensions
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
1 1/2 x 1 1/2 x 3/4 No. 25 SS-SW 2.75 2.75 1.340 40 20 70 70 0.6
x 1 No. 25 SS-SW 2.75 2.75 1.425 70 70 0.6
x 1 1/4 No. 25 SS-SW 2.75 2.75 1.532 70 70 0.7
2 x 2 x 3/4 No. 25 SS-SW 3.25 3.25 2.050 50 20 83 83 0.9
x 1 No. 25 SS-SW 3.25 3.25 2.125 83 83 1.0
x 1 1/4 No. 25 SS-SW 3.25 3.25 2.332 83 83 1.0
x 1 1/2 No. 425 SS 2.75 2.75 2.040 70 70 0.9
2 1/2 x 2 1/2 x 3/4 No. 25 SS-SW 3.75 3.75 2.865 65 20 95 95 1.3
x 1 No. 25 SS-SW 3.75 3.75 3.025 95 95 1.4
x 1 1/2 No. 25 SS-SW 3.75 3.75 3.540 95 95 1.8
x 2 No. 425 SS 3.07 3.07 3.550 78 78 1.6
76.1 x 76.1 x 60.3 No. 425 SS 3.07 3.07 3.578 78 1.6
3 x 3 x 3/4 No. 25 SS-SW 4.25 4.25 4.080 80 20 108 108 1.8
x 1 No. 25 SS-SW 4.25 4.25 4.125 108 108 1.9
x 1 1/4 No. 25 SS-SW 4.25 4.25 4.232 108 108 1.9
x 1 1/2 No. 25 SS-SW 4.25 4.25 4.340 108 108 2.0
x 2 No. 425 SS 3.77 3.23 3.150 96 82 1.4
x 2 1/2 No. 425 SS 3.77 3.23 3.165 96 82 1.4
x 76.1 No. 425 SS 3.77 3.23 3.196 82 1.4
C to E
CtoE
No. 425 SS No. 25 SS-SW
C to E
CtoE
Nominal Size
Style Number
Reducing Tee
C to E Run
C to E Branch
Approx. Weight Each
inches mm
inches mm
inches mm
Lbs. kg
4 x 4 x 1 No. 25 SS-SW 5.00 5.00 5.0100 100 25 127 127 2.3
x 1 1/4 No. 25 SS-SW 5.00 5.00 5.332 127 127 2.4
x 1 1/2 No. 25 SS-SW 5.00 5.00 5.640 127 127 2.5
x 2 No. 425 SS-SW 4.47 3.88 4.950 114 99 2.2
x 2 1/2 No. 425 SS-SW 4.47 3.82 4.965 114 97 2.2
x 76.1 No. 425 SS-SW 4.47 3.82 4.9114 97 2.2
x 3 No. 425 SS-SW 4.47 3.88 4.980 114 99 2.2
139.7 x 139.7 x 88.9 No. 425 SS 5.28 4.38 6.85134 111 3.1
x 114.3 No. 425 SS 5.28 4.38 7.85134 111 3.6
6 x 6 x 2 No. 25 SS-SW 6.50 6.50 11.6150 150 50 165 165 5.3
x 2 1/2 No. 25 SS-SW 6.50 6.50 12.165 165 165 5.5
x 3 No. 425 SS 5.91 4.88 8.880 150 124 4.0
x 4 No. 425 SS 5.91 5.12 9.5100 150 130 4.3
8 x 8 x 2 1/2 No. 25 SS-SW 7.75 7.75 17.5200 200 20 197 197 7.9
x 3 No. 25 SS-SW 7.75 7.75 18.080 197 197 8.2
x 4 No. 425 SS 7.79 6.31 18.1100 198 160 8.2
x 6 No. 425 SS 7.79 6.62 18.5150 198 168 8.4
10 x 10 x 3 No. 25 SS-SW 9.00 9.00 29.0250 250 80 229 229 13.2
x 4 No. 25 SS-SW 9.00 9.00 30.0100 229 229 13.6
x 6 No. 425 SS 8.89 7.70 28.2150 226 196 12.8
x 8 No. 425 SS 8.89 8.59 31.3200 226 218 14.2
12 x 12 x 6 No. 25 SS-SW 10.00 10.00 43.0300 300 150 254 254 19.5
x 8 No. 425 SS 10.39 9.51 40.1200 264 242 18.2
x 10 No. 425 SS 10.39 9.89 47.6250 264 251 21.6
Note: SS-SW denotes segmentally welded.
Schedule 10S Weights and Dimensions
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
Note: All No. 430 SS, No. 433 SS and No. 435 SS fittings are segmentally welded.
No. 433 SS
Schedule 10S Weights and Dimensions
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
139.7 x 88.9 5.500 x 3.500 No. 450 SS 5.00 3.0139.7 88.9 127 1.4
x 114.3 x 4.500 No. 450 SS 5.00 3.2114.3 127 1.5
6 x 2 1/2 6.625 x 2.875 No. 50 SSLT 9.00 6.8150 65 168.3 73.0 229 3.1
x 3 x 3.500 No. 450 SS 5.50 4.080 88.9 140 1.8
x 4 x 4.500 No. 450 SS 5.50 4.2100 114.3 140 1.9
x 139.7 x 5.500 No. 450 SS 5.50 4.5139.7 140 2.0
8 x 40 8 x 4.500 No. 450 SS 6.00 5.3200 100 200 114.3 152 2.4
x 139.7 x 5.500 No. 450 SS 6.00 6.1139.7 152 2.8
x 6 x 6.625 No. 450 SS 6.00 7.0150 168.3 152 3.2
10 x 6 10.750 x 6.625 No. 450 SS 7.00 8.8250 150 273 168.3 178 4.0
x 8 x 8.625 No. 450 SS 7.00 11.5200 219.1 178 5.2
12 x 8 12.750 x 8.625 No. 450 SS 8.00 13.2300 200 323.9 219.1 203 6.0
x 10 x 10.750 No. 450 SS 8.00 17.0250 273.0 203 7.7
* No. 450 SS in this size is Grade CF8M conforming to ASTM A 351/A 351M, A 743/A 743M and A 744/A 744M.
Schedule 10S Weights and Dimensions
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
Dimensions:
Concentric ReducersNo. 450 SSNo. 50 SSLT
Nominal Size
Actual Outside Dia.
Style Number
Reducing Tee
E to E Run
Approx. Weight Each
inches mm
inches mm
inches mm
Lbs. kg
1 1/2 x 3/4 1.900 x 1.050 No. 50 SSLT 3.75 1.340 20 48.3 26.7 95 0.6
x 1 x 1.315 No. 50 SSLT 3.75 1.425 33.7 95 0.6
x 1 1/4 x 1.660 No. 50 SSLT 3.75 1.532 42.4 95 0.7
2 x 3/4 2.375 x 1.050 No. 50 SSLT 3.75 2.050 20 60.3 26.7 95 0.9
x 1 x 1.315 No. 50 SSLT 3.75 2.125 33.7 95 1.0
x 1 1/4 x 1.660 No. 50 SSLT 3.75 2.332 42.4 95 1.0
x 1 1/2 x 1.900 No. 450 SS 5.00 1.340 48.3 127 0.6
2 1/2 x 1 2.875 x 1.315 No. 50 SSLT 5.00 3.065 25 73.0 33.7 127 1.4
x 1 1/4 x 1.660 No. 50 SSLT 5.00 2.832 42.4 127 1.3
x 2 x 2.375 No. 450 SS* 5.00 1.750 60.3 127 0.8
76.1 x 60.3 3.000 x 2.375 No. 450 SS 2.50 1.776.1 60.3 64 0.8
3 x 1 3.500 x 1.315 No. 50 SSLT 5.00 4.080 25 88.9 33.7 127 1.8
x 1 1/4 x 1.660 No. 50 SSLT 5.00 4.132 42.4 127 1.9
x 1 1/2 x 1.900 No. 50 SSLT 5.00 4.240 48.3 127 1.9
x 2 x 2.375 No. 450 SS 5.00 1.650 60.3 127 0.7
x 2 1/2 x 2.875 No. 450 SS 5.00 1.565 73.0 127 0.7
x 76.1 x 3.000 No. 450 SS 5.00 1.576.1 127 0.7
4 x 2 4.500 x 2.375 No. 450 SS 5.00 3.9100 50 114.3 60.3 127 1.8
x 2 1/2 x 2.875 No. 50 SSLT 5.00 5.865 73.0 127 2.6
Schedule 5S fittings feature the same C to E and E to E dimensions as Schedule 10S fittings, found below. For Schedule 5S weights, please contact Victaulic.
Dimensions:
Eccentric ReducerNo. 51 SSLT
No. 51 SSLT
E to E
Nominal Size
Actual Outside Dia.
No. 51 SSLT Eccentric Reducer
E to E Run
Approx. Weight Each
inches mm
inches mm
inches mm
Lbs. kg
1 1/2 x 3/4 1.900 x 1.050 3.75 1.340 20 48.3 26.9 95 0.6
x 1 x 1.315 3.75 1.425 33.7 95 0.6
x 1 1/4 x 1.660 3.75 1.532 42.4 95 0.7
2 x 3/4 2.375 x 1.050 3.75 2.050 20 60.3 26.7 95 0.9
x 1 x 1.315 3.75 2.125 33.7 95 1.0
x 1 1/4 x 1.660 3.75 2.332 42.4 95 1.0
x 1 1/2 x 1.900 3.75 2.540 48.3 95 1.1
2 1/2 x 1 2.875 x 1.315 5.00 2.865 25 73.0 33.7 127 1.3
x 1 1/2 x 1.900 5.00 3.032 48.3 127 1.4
x 2 x 2.375 5.00 3.550 60.3 127 1.6
3 x 1 3.500 x 1.315 5.00 4.080 25 88.9 33.7 127 1.8
x 1 1/4 x 1.660 5.00 4.132 42.4 127 1.9
x 1 1/2 x 1.900 5.00 4.240 48.3 127 1.9
x 2 x 2.375 5.00 4.350 60.3 127 2.0
x 2 1/2 x 2.875 5.00 4.565 73.0 127 2.0
4 x 2 4.500 x 2.375 5.00 4.8100 50 114.3 60.3 127 2.2
x 2 1/2 x 2.875 5.00 5.865 73.0 127 2.6
x 3 x 3.500 5.00 5.980 88.9 127 2.7
6 x 2 1/2 6.625 x 2.875 9.00 6.8150 65 168.3 73.0 229 3.1
Note: Sch. 40S fittings in this document, except No. 410H SS and No. 411H SS, are segmentally welded stainless steel.
Elbows:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M.
Tees:
1 – 12"/25 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Reducing Tees:
2 x 2 x 1 – 12 x 12 x 10"/50 x 50 x 25 – 300 x 300 x 250 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Laterals:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312 M, or sheet conforming to ASTM A 240/A 240M.
True Wyes:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ 403M, or pipe conforming to ASTM A 312/A 312 M, or sheet conforming to ASTM A 240/A 240M.
Crosses:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312 M, or sheet conforming to ASTM A 240/A 240M.
Adapter Nipples:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from pipe conforming to ASTM A 312/ A 312 M.
Concentric Reducers:
2 x 1 – 12 x 10"/50 x 25 – 300 x 250 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Eccentric Reducers:
2 x 1 – 12 x 10"/50 x 25 – 300 x 250 mm:
Schedule 40S, Type 304L or 316L stainless steel roll or cut grooved from material conforming to ASTM A 403/ A 403M, or pipe conforming to ASTM A 312/A 312M, or sheet conforming to ASTM A 240/A 240M.
Caps:
¾ – 12"/20 – 300 mm:
Schedule 40S, Type 304L or 316L stainless steel conforming to ASTM A 403/A 403M.
InstallationReference should always be made to the I-100 Victaulic Field Installation Handbook for the product you are installing. Handbooks are included with each shipment of Victaulic products for complete installation and assembly data, and are available in PDF format on our website at www.victaulic.com.
WarrantyRefer to the Warranty section of the current Price List or contact Victaulic for details.
NoteThis product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.
TrademarksVictaulic and Zero-Flex are registered trademarks of Victaulic Company.