7 7 6 5** 1 7 6 2 8 3 4 10 9 11 12 10 9 10 9 7 10 10 10 **Note: On some bikes this 1/4" thick rubber washer is not required nor desired. To determine the best results for achieving the least vibration of your Love Jugs and horn assembly on your particular bike, Install the Vibration Master with and without this rubber washer. A couple of minutes of easy trial and error effort, to determine if you will use the rubber washer (You should see a difference especially at idle ) will insure you the best possible Love Jug's installation, for a lifetime of use. The second 1/4" rubber washer on the front of the unit must always be used. ITEM NO. DESCRIPTION QTY. 1 Love Jug's Stainless Steel Name Plate Bracket 1 2 New rubber vibration isolators 2 3 Stainless Steel (not polished) bracket 1 4 Stainless Steel (polished) cover 1 5** **Rubber disc 1/4" X 1.5" ** 2 6 5/16" -18 Hex Nut 2 7 5/16" Split Lock Washer 4 8 5/16" -18 X 1" Hex Bolt Head 2 9 5/16" Chrome Acorn Nut 3 10 5/16" CHROME Split Lock Washer 3 11 Stainless Steel Insert Bracket (not polished) 1 12 Your Existing Harley Chrome Horn Bracket 0