Vibration Analysis and Reliability Training & Certification Omega Consulng Engineers Pty Limited is recognized by Mobius Instute as an authorized training & examinaon centre to deliver training & cerficaon examinaons in accordance with ISO 18436 & ISO/IEC 17024 — Vibraon Analysis Categories 1-3 & Reliability. Category 1 This training is suitable for those who are new to vibraon analysis or have 6 months experience. The outcome of this training will help you to understand vibraon condion monitoring and how it predicts failures in rotang machines. The course is good for maintenance technicians/engineers and reliability engineers. • Maintenance pracces • Condion monitoring • Principles of vibraon • Introducon to vibraon measurement • An introducon to the me waveform • An introducon to the spectrum • An introducon to forcing frequencies • Explaining the different vibraon units • A brief introducon to phase • Data acquision • A quick review of data acquision • How do we measure vibraon? • Where to place the sensor on the machine • Understanding axial, radial, vercal, and horizontal readings • A quick introducon to mounng the accelerometer and surface preparaon • Naming convenons • What are “routes” and how do you create them? • Signal processing • A quick tour of your analyzer • Spectral averaging • Vibraon analysis • The spectrum analysis process • What is resonance – a quick introducon • Diagnosing common fault condions • Seng alarm limits Date: 18 th to 21 st February 2019 Duraon: 3.5 days Training & 2 hours Exam Day Time Descripon 1 8.00 am — 5.00 pm Training 2 8.00 am — 5.00 pm Training 3 8.00 am — 5.00 pm Training 8.00 am — 12.00 pm Training 4 12.00 pm — 3.00 pm Exam Email: [email protected] Website: www.ocengineering.com.au Tel: +61 8 8447 7737 Category 1 Topics Covered: Send in your expression of interest before 15th January 2019 to [email protected] Locaon will be announced later but will be in one of the Suva hotels For more informaon visit: www.ocengineering.com.au www.mobiusinstute.com