This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Ideal mixing & heating for sample in conical tubesDigital microprocessor control [PID] : digital displayWell designed ventilation system provides with accurate temperature controlTemperature range from ambient +5°C to 65°COrbit of 6mm in low speed and orbit of 40mm in high speedVariable speed range : 60~500rpmHigh quality permanent DC brushless motor for gentle and powerful motionContinuous or timed operationRack for 50ml conical tube : 12ea or Rack for 15ml conical tube : 18eaLED display (Shown actual speed or time)“up and over” door
confido-S50H heating
confido-S50
Specification
CO-5012
CO-1518
(Rack for 12X50ml conical tubes)
(Rack for 18X15ml conical tubes)
Accessory
Model confido-S50 confido-S50HOrbit Range Low speed - 6mm / High speed - 40mmSpeed Range 60 ~ 500rpm
Capacityconical tube 50ml 12 eaconical tube 15ml 18 ea
Model number DescriptionFT402-50-25 Flask rack for 50ml Flask-capacity : 25ea
FT402-100-25 Flask Rack for 100ml flask-capacity : 25ea
FT402-250-14 Flask Rack for 250ml flask -capacity : 14ea
FT402-500-9 Flask Rack for 500ml flask -capacity : 9ea
FT402 Universal plate for flask holder (400x400mm)
2D Silicon RACK-400 Silicon Rack for Shaker 2D-400
Accessories (2D-300)
Model number DescriptionFT302-50-13 Flask rack for 50ml flask-capacity : 13ea
FT302-100-13 Flask Rack for 100ml flask-capacity : 13ea
FT302-250-8 Flask Rack for 250ml flask -capacity : 8ea
FT302-500-5 Flask Rack for 500ml flask -capacity : 5ea
FT302 Universal plate for flask holder (300x300mm)2D Silicon RACK-300 Silicon Rack for Shaker 2D-300
2D-300
2D-400
Accessory
Change between orbital or reciprocating motionSmooth and powerful orbital or reciprocating motion at alow speed Optional platform available for flasksLED display (shown actualy speed or time)High quality permanent DC brushless motor for gentle andpowerful motion.Continuous or timed operation
Description
or
44
FINEV RTEXTM
4
FINEV RTEXTM
Specification
Unit
3 STEP SWITCH
Universal RackAll kinds of test tubes can be loaded on the unversial rack.
Shock-absober feetAnti-vibration during the vortexing of theFINEVORTEX.The shock-absorber feet is holding the ground not to slip.without slipping
Rubber platform (RP-70)Rubber platform provides easier vortexing for twoor three tubes at the same time.
Stop
Continue
Touch
Model FINEVORTEXOrbit range 4mmSpeed range 0 ~ 3000rpm Temp.Resist 5°C~ 40°C
Model Number DescriptionFINEVORTEX, 110V Vortex Mixer (with rubber platform)FINEVORTEX, 220V Vortex Mixer (with rubber platform)
FINEVORTEX, 230V Vortex Mixer (with rubber platform) CE cert.DARK BLUE WHITE GRAY
1.5ml Tube 15ml Tube 50ml Tube Flask
Touching mode
1.5ml centrifuge Tube
Using twotubes at the same time
Smooth touching with 15ml tube
15ml Conical Tube
Continuous mode
Using Rubber platform mode (RP-70)
COLOR
HOW TO USE
SimpleDo not need any other accessories.Universal rack can be used for all kinds of tubes.
Smooth touch
StrongVery powerful and stable motionwithout noise on 3,000rpm.
StableSpecial Rubber feet with shock-absorbersystem prevent it from moving around on a desk.
4S
55
MICROMIXER
Micro well plates mixer - ideal mixing combinationCompact mixer with vibration and small orbit for effective mixingSmooth vibrating motionContinuous or timed operationMX4 : standard platform for 4 micro well platesMX2 : standard platform for 2 micro well platesOptional rack for 1.5ml centrifuge tubeSimple Silicone holders for easy and speed of plate installation
Unit
Model Number DescriptionMX2, 110V Micromixer (without tube rack)MX2, 220V Micromixer (without tube rack)
Micro well plate mixer with digitalHigh quality permanent DC brushless motor for gentle and powerful motionconfido - S202 : Standard platform for 4 micro well platesconfido - S20 : Standard platform for 2 micro well platesContinuous or timed operationOptional rack for 1.5ml centrifuge tubesSimple silicon holders for easy and speedy of plate installation.LED display (Shown actual speed or time)
confido-S202
confido-S20
Plate installation
Accessory
simple silicon holders allow quick and easy fitting of micro well plates andoptional rack for 1.5ml centrifuge tube.
11 22
MR 1.5 -24(for 1.5ml Tubes)
TM
Specification
Model confido-S202 confido-S20Orbit Range 3mm
Speed
micro well plate &1.5ml tube
300 ~ 1600rpm 300 ~ 2000rpm
deep well plate 300 ~ 1400rpm -
Capacitymicro well plate 4ea 2eadeep well plate 4ea -
simple silicon holders allow quick and easy fitting of micro well plates andoptional rack for 1.5ml centrifuge tube.
11 22
MR 1.5 -24(for 1.5ml Tubes)
TM
“up and over” door
confido-S20Hheating
confido-S202Hheating
Micro well plate mixer with heatingDigital microprocessor control [PID] : digital displayWell designed ventilation system provides with accuratetemperature controlconfido - S202H : Standard platform for 4 micro well platesconfido - S20H : Standard platform for 2 micro well platesTemperature range from ambient +5°C to 65°CHigh quality permanent DC brushless motor for gentle andpowerful motionContinuous or timed operationOptional rack(MR1.5-24) for 1.5ml centrifuge tubesSimple silicon holders for easy and speedy of plate installation.LED display (Shown actual speed or time)”up and over”door
Specification
Model confido-S202H confido-S20HOrbit Range 3mm
Speed
micro well plate &1.5ml tube
300 ~ 1600rpm 300 ~ 2000rpm
deep well plate 300 ~ 1400rpm
Capacitymicro well plate 4ea 2eadeep well plate 4ea 2ea
Model Number DescriptionAR6, 110V Compact INCUBATORAR6, 220V Compact INCUBATOR
AR6, 230V Compact INCUBATOR
ACCESSORIES
6 SHELF
Specification
Model AR6Temp. Range Ambient +5°C~65°C
Temp. Accuracy 0.5°CTemp. System Air circulation (PID system)
Timer 99hour 59minWeight 13kg
Dimensions(mm)outside : W370 x D395 x H400inside : W310 x D280 x H270
Wattage 400W
Power AC 110V/220V/230V, 50/60Hz
AccessoriesModel Number Description
6Shelf 300mm 270mm
compact INCUBATORDigital micro processor control [PID] for highest accuracyRubber magnet sealed doorUnique dual insulation construction for recovering the set temperaturerapidle after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-outOver-temperature safety thermostate
AR6
Can choose 2 6shelf
hybridization INCUBATORTM
9
Specification
Model combi-H12Temp. Range Ambient +5°C 80°C
Temp. Accuracy 0.5°C
Timer 99hour 59minRotational Speed 0 ~ 40 rpm
Material Inside chamber : Stainless steelWeight 26kg
Model Number DescriptionBT40-120 40mm Diameter 120mm length bottle with silicon capBT40-200 40mm Diameter 200mm length bottle with silicon capBT60-200 60mm Diameter 200mm length bottle with silicon cap
BT80-200 80mm Diameter 200mm length bottle with silicon cap
Standard incubator - high capacity rotisserieDigital microprocessor control [PID] for highest accuracyRubber magnet sealed doorA wide choice of rotisseries ; especially large capacity rotisseriefor small and large bottlesOptional rocking platform for washingUnique dual insulation construction for recovering the settemperature rapidly after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostat
ACCESSORIES
Optional interior electrical socket for use small equipment is available uponspecial request
12RT-4 12RT-8 12RT-12
12RT-16V 12RT-24H 12RT200-64
12RT-8V 12RT-12V
12RT200-96 12RT200-128
HY-Bag 12H-DT 12RK-H Silicon cap Bottle 12 shelf
combi-H12
Can choose rocking plate for washing Can choose 2 shelf
hybridization INCUBATORTM
10
High capacity chambers for multi-purpose applicationDual chambers with independent controls Digital microprocessor control [PID] for highest accuracyRubber magnet sealed doorA wide choice of rotisseries ; especially large capacityrotisserie for small and large bottlesOptional rocking platform for washingUnique dual insulation construction for recovering the settemperature rapidly after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostat
Vertical type construction for efficient bench spaceDigital microprocessor control [PID] for highest accuracyRubber magnet sealed doorA wide choice of rotisseries ; especially large capacityrotisserie for small and large bottlesOptional rocking platform for washingUnique dual insulation construction for recovering the settemperature rapidly after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostat
Can choose rocking plate for washing Can choose 2 shelf
ACCESSORIES
Optional interior electrical socket for use small equipment is available uponspecial request
12RT-4 12RT-8 12RT-12
12RT-16V 12RT-24H 12RT200-64
12RT-8V 12RT-12V
12RT200-96 12RT200-128
HY-Bag 12H-DT 12RK-H Silicon cap Bottle 12 shelf
hybridization INCUBATORTM
12
Rotisserie and shaker in one unit Digital microprocessor control [PID] for highest accuracyRubber magnet sealed doorOrbital shaking platform with clamps for 6x250ml flasks A wide choice of rotisseries ; especially large capacity rotisserie for small and large bottlesOptional rocking platform for washingUnique dual insulation construction for recovering the set temperature rapidly after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostatDoor electronic safe switch
Model Number DescriptionBT40-120 40mm Diameter 120mm length bottle with silicon capBT40-200 40mm Diameter 200mm length bottle with silicon capBT60-200 60mm Diameter 200mm length bottle with silicon cap
BT80-200 80mm Diameter 200mm length bottle with silicon cap
High capacity for shaking platform & rotisserie, all in one Simultaneous operation of the shaker and the upper rotisserieDigital microprocessor control[PID] for highest accuracyRubber magnet sealed door Orbital shaking platform with clamps for 6x250ml flasksA wide choice of rotisseries; especially large capacity rotisserie for small andlarge bottlesOptional rocking platform for washingUnique dual insulation construction for recovering the set temperaturerapidly after opening the doorSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostatDoor electronic safe switch
combi-SV120
Can choose rocking plate for washing Can choose 4 shelf
12RT-16V 12RT-24H 12RT200-64
HY-Bag 12H-DT 12RK-SV
12RT-200-96
Silicon cap Bottle FR250-6
12RT200-128
12 shelf STB3320
ACCESSORIES
Optional interior electrical socket for use small equipment is available uponspecial request
12RT-4 12RT-8 12RT-12 12RT-8V 12RT-12V
14
Shaking INCUBATORTM
VIEW OF ACTUAL MOVEMENTS
Other Accessories
Model Number DescriptionFT302-MP4 Rack for micro well plate - Capacity : 4eaFT302-50-13 Flask Rack for 50ml flask - Capacity : 13eaFT302-100-13 Flask Rack for 100ml flask - Capacity : 13ea
FT302-250-8 Flask Rack for 250ml flask - Capacity : 8ea
BAE07-H300
BAE07-C300
3D &2D motion
heating
heating cooling
ACCESSORIES
Dimple pad for conical tubes Rubber mat for patridish for micro well plate(4ea) or 1.5ml centrifuge tube(96ea)
Rack for flask
Variable plate for heating and shaking IncubatorBetween the inside of mechanism and chamber are separated, therefore,there is no loss of heat.BAE MECHANISM(patented, 5step angle adjustment system) allows orbitalmotion and various twist for movementDigital micro processor control [PID] for highest accuracyCan select heating & cooling mode or heating modeOrbit of 18mm for best mixing result especially for get and blottingconvenient upward opening doorDual mat to accommodate each vessels in the proper matLED display for actual speedSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-outOver-temperature safety thermostate
Model BAE07-H300 BAE07-C300Speed Range 30-300rpm 30-300rpm
Shaking Angle
orbital range-18mm orbital range~18mm3D twist 5°3D twist 10°3D twist 15°3D twist 20°
3D twist 5°3D twist 10°3D twist 15°3D twist 20°
Temp. Range Ambient +5°C~80.0°C 15.0°C~65.0°CDimensions(mm) W470xD630xH410 W470xD630xH410
Weight 34kg 39kgWattage 610W 810WPower
Shaking Capacities
Model BAE07-H300 BAE07-C3001.5ml Tubes 96ea
Conical Tubes(50ml) 14eaPatridish 9ea
Micro Well Plate 4eaDeep Well Plate 4ea
Flask 50ml 13eaFlask 100ml 13ea
Flask 250ml 8ea
FT302 - MP4
MR1.5-24
Unit
Model Number DescriptionBAE07-H300, 110V Shaking INCUBATORBAE07-H300, 220V Shaking INCUBATORBAE07-H300, 230V Shaking INCUBATOR CE cert.BAE07-C300, 110V Shaking INCUBATORBAE07-C300, 220V Shaking INCUBATOR
BAE07-C300, 230V Shaking INCUBATOR CE cert.
TM
AC 110V/220V/230V, 50/60Hz
15
Shaking INCUBATORTM
[for micro well plate]
well design for heating and shaking IncubatoBetween, the inside of mechanism and chamber are separated,therefore, there is no loss of heat.Digital micro processor control [PID] for highest accuracyCan select heating & cooling mode or heating modeVariable speed between 300 to 2000rpmConvenient upward opening doorStandard platform for six microplatesSimple silicon holders for easy and speed of plate installationLED display for actual speedSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-outOver-temperature safety thermostate
BAE07-H2000
BAE07-C2000
2D motion
heating
heating cooling
MR1.5 - 24
1.5ml centrifuge tube : 24ea
ACCESSORIES
Specification
Model BAE07-H2000 BAE07-C2000Speed Range 300-2000rpm 300-2000rpmOrbit Range 3mm 3mmTemp. Range Ambient +5°C~65.0°C 15.0°C~65.0°C
Dimensions(mm) W470xD630xH410 W470xD630xH410
Weight 34kg 39kgWattage 610W 810WPower
Shaking Capacities
Model BAE07-H2000 BAE07-C20001.5ml Tubes 144ea 144ea
Micro Well Plate 6ea 6ea
Deep Well Plate 6ea 6ea
Unit
Model Number DescriptionBAE07-H2000, 110V Shaking INCUBATORBAE07-H2000, 220V Shaking INCUBATORBAE07-H2000, 230V Shaking INCUBATOR CE cert.BAE07-C2000, 110V Shaking INCUBATORBAE07-C2000, 220V Shaking INCUBATORBAE07-C2000, 230V Shaking INCUBATOR CE cert.
TM
AC 110V/220V/230V, 50/60Hz
THERMO BATH
16
ALB128
ALB64
[Block Heater]
Specification
Model ALB 64 ALB 128Temp. Range Ambient +5°C 150°C
Model Number DescriptionJD90 Block extraction tool
CV64-80 High cover for Test tube (W115 D115 H80mm)
CV128-80 High cover for Test tube (W230 D115 H80mm)CV64-80 CV128-80 CV64 -F CV128-F
Other types of blocks are available upon special request
Cover
GB-90(Ball bath) AB128-MPL(For micro plate)
JD-90AB90-C15 AB90-C50
ACCESSORIES
High temperature heating without the need for oil and waterDigital microprocessor control [PID] for highest accuracyA variety of interchangeable insert blocksBlock combined with the close fit of the tubes for fast efficient heat transferSpecial thicker blocks guarantee excellent temperature stabilityStandard flat covers for protecting the user from accidentally touching a hot block andspitting tubesSafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostat
heating
heating
AB90-0.2 AB90-0.5 AB90-1.5 AB90-12 AB90-13
THERMO BATH
17
[Block Heater]
Special thicker blocks guarantee excellent temperaturestabilityDigital microprocessor control [PID] for highest accuracyA variety of interchangeable insert blocksBlock combined with the close fit of the tubes for fastefficient heat transferStandard flat covers for protecting the user from accidentallytouching a hot block and spitting tubesSafety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostate
Other types of blocks are available uponspecial request
cool BLOCK
18
Cooling and heating in one unitDigital microprocessor control [PID] ; Digital displayIndependent cooling and heating systems for years of trouble-free operationA variety of interchangeable insert blocksBlock combined with the close fit of the tubes for fast efficient heat transferSpecial thicker blocks guarantee excellent temperature stabilitySafety features :Flashing alarm lamp to warn over-temperatureOver-temperature cut-out Over temperature safety thermostat
Other types of blocks are available upon special request
CV6400-80 CV6400-F
Cover
AB90-0.2 AB90-0.5 AB90-1.5
GB-90(Ball bath) JD-90
AB90-12 AB90-13
AB90-C15 AB90-C50
ACCESSORIES
ALB6400
Specification
Model ALB 6400Temp. Range
Temp. AccuracyTimer
Cooling MethodHeating Method
Material
Weight Dimensions (mm)
Wattage
Power
Unit
Model Number DescriptionALB6400, 110V cool BLOCK (with CV6400-F) ALB6400, 220V cool BLOCK (with CV6400-F)
Special thicker blocks guarantee excellent temperature stabilityDigital microprocessor control [PID] for highest accuracyA variety of interchangeable insert blocksBlock combined with the close fit of the tubes for fast efficient heat transferStandard flat covers for protecting the user from accidentally touching a hot block and spitting tubesSafety features : Flashing alarm lamp to warn over-temperature Over-temperature cut-out Over temperature safety thermostate
Model Number DescriptionALB-C1, 110V cool BLOCK (with CVC1-F) ALB-C1, 220V cool BLOCK (with CVC1-F)
ALB-C1, 230V cool BLOCK (with CVC1-F) CE cert.
19
TM
0.0°C ~ 95.0°C 99hour 59min
0.5°C peltier
cartridge Heater 150W - 2ea 1 Block
Energy plate and sample block : AluminumInside and insulating side : Stainess steel
W200 D300 H190360W
11.5kg (without block)
AC 110V/220V/230V, 50/60Hz
compact ROCKERTM
Specification
Model CR95Tilt Angle 7°
Speed Range selected 4 ~ 32rpm (6steps) Motor DC 3.5A, Engineering Plastic gear
Temp. Resist Lower than 80°C(Dry air)Loadable Weight 5kg
Weight 6kg
Dimensions (mm)Overall : W290 D210 H167
Platform : W290 D200
Wattage 18WPower AC110V / 220V / 230V, 50/60Hz
Unit
Model Number DescriptionCR95 , 110V compact Rocker (with silicon mat)CR95 , 220V compact Rocker (with silicon mat)
CR95 , 230V compact Rocker (with silicon mat) CE cert.
Accessories
Model Number DescriptionDP-95 Dimpled mat (W290 X D200 mm)
TY95 Second platform, (with posts : 4ea)
Economical and compact rockerSet speed setting of 4, 8, 12, 16, 24, and 32 rpmSuitable for continuous operationCan be used in incubators up to 80°CSturdy and durable construction for use at high and low temperatureNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundAll moving parts of the rocking platform are combined with ball joints for smooth operationand years of consistent operation
ACCESSORIES
DP-95
TY95 (Second platform)
CR95
20
compact ROCKERTM
Compact rocker in timed and continuous operationVariable speed control from 0 and 70 rpm Continuous or timed operationSturdy and durable construction for use at high and low Optional second platform available to double the working areaNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundAll moving parts of the rocking platform are combined with ball joints for smooth operationand years of consistent operation
ACCESSORIES
DP-100
TY100 (Second platform)
Specification
Model CR100Tilt Angel 9
Speed Range Variable 0 ~ 70rpmMotor DC 3.5A, Engineering Plastic gearTimer 180min
Temp. Resist Lower than 65 (Dry air)Loadable Weight 7kg
Model Number DescriptionDP-100 Dimpled mat (W290 X D200 mm)
TY100 Second platform, (with posts: 4ea)
CR100
21
compact ROCKERTM
22
Large capacity platforms and smooth rocking motionVariable speed control between 0 and 70 rpm Continuous or timed operationSturdy and durable construction for use at high and low temperatureOptional second platform available to double the working area :large upper platform for a variety of flasks and tubesNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundAll moving parts of the rocking platforms are combined with ball joints for smooth operation andyears of consistent operationCan select economical model or the version with LED display of rpm
CR300
CR300t(with tachometer)
Specification
Model CR300 CR300t(tachometer)Tilt Angle 9°
Speed Range 0 ~ 70 rpmMotor DC 3.5A, Engineering Plastic gearTimer 180min
Temp. Resist Lower than 65°C(Dry air) Lower than 55°C(Dry air)Loadable Weight 10kg
Weight 8.2kg
Dimensions (mm)Overall : W300 D300 H232
Platform : W300 D300
Wattage 35WPower Free Voltage (AC100~240V)
Accessories
Model Number DescriptionDP-300 Dimpled mat(W300 D300 mm)
TY300 Second platform, (with posts : 4ea)
UP400 400 400 mm upper platformUP500 500 500 mm upper platform
ACCESSORIES
DP-300
UP400 (upper platform 400 x 400 mm)
UP500 (upper platform 500 x 500 mm)
TY300 (Second platform)
twist SHAKERTM3Dmotion
Powerful but, reliable 3D orbital motionGentle 3D motion and sturdy construction for high capacityContinuous or timed operationStandard elastic ties for easy fitting of flasks and conical tubesOptional second platform available to double the working area ;large upper platform for a variety of flasks and tubesNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundRubber bellows for maximum user safety to protect the user from accidentally jamming user's fingersCan select economical model or the version with LED display of rpm
TW3t(with tachometer)
TW3
Specification
Model TW3 TW3t(tachometer)Tilt Angle 7°
Speed Range 0 ~ 70 rpmMotor DC 3.5A, Engineering Plastic gearTimer 180min
Temp. Resist Lower than 65°C(Dry air) Lower than 55°C(Dry air)Loadable Weight 5kg
Model Number DescriptionDP-300 Dimpled mat (W300 X D300 mm)
TY300 Second platform, (with posts : 4ea)
UP400 400 400mm upper platform
ACCESSORIES
DP-300
UP400 (upper platform 400 x 400 mm)
TY300 (Second platform 300 x 300 mm)
23
mini Multi SHAKER
Specification
Model FMS2Speed range 5 ~ 90 rpm
Motor DC Warm Geard motorTemp. Resist Lower than 65°C(Hum 90%)
Loadable weight 1KgWeight 3Kg
Dimensions(mm) W200 D200 H127Wattage 50W
Power Free Voltage (AC100~240V)
The table for angle adjustment
Motion select FMS2 Orbital motion
orbit of 18mm 5°, 10°, 15°, 20° tilt angle3D motion
VIEW OF ACTUAL MOVEMENTS
FMS2
Compact multi shaker for incubatorBAE MECHANISM(patented, 5 step angle adjustment system)allows orbital motion and varioius twistmovementSealed construction to prevent heat transfer from motor to platform for use in incubator and coldchamberVariable speed control, from 5 to 90 rpmOrbit of 18mm for best mixing result especially for gel and blotting20cm×20cm platform for efficient incubator operationDual mat to accommodate each vessels in the proper mat
[Adjustable - 3D & 2D motion]
24
Multi SHAKER TM
[Adjustable - 3D & 2D motion]
Extremely quiet operation with various movement positionBAE MECHANISM(patented, 5 step angle adjustment system)allows orbital motionand various twist movementVariable speed between 30 to 300 rpmOrbit of 18mm for best mixing result especially for gel and blottingHigh quality permanent DC brushless motor for gentle and powerful motionContinuous or timed operationSimple and easy of angle adjustmentDual mat to accommodate each vessels in the proper mat
Specification
Model FMS3Speed range 30 ~ 300 rpm
Motor DC Brushless motorTemp. Resist Lower than 55°C(Dry air 85%)
Loadable weight 3KgTimer 180min
Weight 12KgDimensions(mm) W300 D300 H155
Wattage 30W
Power Free Voltage (AC100~240V)
The table for angle adjustment
Motion select FMS3Orbital motion
orbit of 18mm 5°, 10°, 15°, 20° tilt angle3D motion
FT302-50-13 Fiask Rack for 50ml flask-Capacity : 13ea
FT302-100-13 Fiask Rack for 100ml flask-Capacity : 13ea
FT302-250-8 Fiask Rack for 250ml flask-Capacity : 8ea
FT302-500-5 Fiask Rack for 500ml flask-Capacity : 5eaFT302 Universal plate for flask holder
FT302-MP4 Rack for micro well plate - Capacity : 4ea
SH30t(with tachometer)
Use with a wide variety of large capacity platformsSmooth and powerful orbital motion at a low speedContinuous or timed operationOptional second platform available to double the working area ;large upper platform for a variety of flasks and tubesOther type flask platform also available upon special requestStandard elastic ties for easy fitting of flasks and conical tubesNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundCan select economical model or the version with LED display of rpm
Model Number DescriptionDP-300 Dimpled mat (W300 D300 mm)
TY300 Second platform, (with posts : 4ea)
UP400 400 x 400 mm upper platform
UP500 500 x 500 mm upper platform
ACCESSORIES
DP-300
UP400 (upper platform 400 x 400 mm)
TY300 (second platform 300 x 300 mm)
Other Accessories
Model Number DescriptionCP50 50ml flask holder
CP100 100ml flask holder
CP250 250ml flask holder
CP500 500ml flask holder
FT302-50-13 Fiask Rack for 50ml flask-Capacity : 13ea
FT302-100-13 Fiask Rack for 100ml flask-Capacity : 13ea
FT302-250-8 Fiask Rack for 250ml flask-Capacity : 8ea
FT302-500-5 Fiask Rack for 500ml flask-Capacity : 5eaFT302 Universal plate for flask holder
FT302-MP4 Rack for micro well plate - Capacity : 4ea
SH30L
Large capacity platforms - smooth reciprocating motionSmooth and powerful reciprocating motion at a low speedContinuous or timed operationOptional second platform available to double the working area ;large upper platform for a variety of flasks and tubesStandard elastic ties for easy fitting of flaks and conical tubesNon-slip mat as standard ; optional dimpled mat prevents tubes from rolling aroundCan select economical model or the version with LED display of rpm
Model Number DescriptonD50-8 Disk / 50ml conical tube-capacity: 8eaD15-16 Disk / 15ml conical tube-capacity: 16eaD1.5-32 Disk / 1.5ml centrifuge tube-capacity: 32eaD1.5-60 Disk / 1.5ml centrifugel tube-capacity: 60ea
D250-4 Disk / 250ml Flask-capacity: 4ea
Roller Drum
Model Number DescriptonRD16-151 Roller Drum / Up to 15mm Diameter tube-capacity : 151eaRD18-104 Roller Drum / Up to 17mm Diameter tube-capacity : 104ea
RD25-42 Roller Drum / Up to 24mm Diameter tube-capacity : 42ea
Other Accessories
Model Number DescriptionPO-4 Mount knobs for attaching one or two disks to the unit
D1.5-32 D1.5-60 D15-16
RD16-151 RD18-104 RD25-42
D50-8 D250-4
PO-4
ACCESSORIES
Specification
Model AGAngle Range 0° ~ 90°Speed Range 0 ~ 50rpm
Timer 99hour 59minTemp.Resist Lower than 65°C(Dry air)
Weight 7.5kgDimensions (mm) W220 D236 H246
Wattage 35WPower Free Voltage (AC100~240V)
AG
Adjustable speed and angle of rotationVariable speed and adjustable mixing angle, 0 to 90Continuous or timed operationDurable construction for long-term operation5 different disks and 3 roller drums ; Disks are also available for 250ml flaskAdd up to 2 disks together for applicationLED display for actual speed
28
ROTATORTM
Other Accessories
Model Number DescriptionPO-4 Mount knobs for attaching one or two disks to the unitPO-4
Use with a wide variety of accessoriesVariable speed and adjustable mixing angle, 0 to 90Continuous or timed operationA wide choice of accessories to be used, including conical tubes, bottlesand 250ml flaskOptional rocking platform for washingLED display for actual speed
D1.5-32 D1.5-60 D15-16
RD16-151 RD18-104 RD25-42
12RT-10 12RT-8V 12RT-16V
D50-8 D250-4
12RT-4
12RT-24H
12RT-200-96 12RT200-128 12RT300-120 12RT300-180
Silicon cap Bottle 12RK-HAG
12RT-6
12RT200-64
12RT300-240
ACCESSORIES
HAG
Specification
Model HAGAngle Range 0° ~ 90°Speed Range 0 ~ 50rpm
Timer 99hour 59minTemp.Resist Lower than 65°C(Dry air)
Weight 8kgDimensions (mm) W502 D236 H246
Wattage 35W
Power Free Voltage (AC100~240V)
Disk
Model Number DescriptionD50-8 Disk / 50ml conical tube-capacity : 8eaD15-16 Disk / 15ml conical tube-capacity : 16eaD1.5-32 Disk / 1.5ml centrifuge tube-capacity : 32eaD1.5-60 Disk / 1.5ml centrifuge tube-capacity : 60eaD250-4 Disk / 250ml Flask-capacity: 4ea
Roller Drum
Model Number DescriptionRD16-151 Roller Drum / Up to 15mm Diameter tube-capacity : 151eaRD18-104 Roller Drum / Up to 17mm Diameter tube-capacity : 104ea
RD25-42 Roller Drum / Up to 24mm Diameter tube-capacity : 42ea
Roller Drum
Model Number Description12RT-4 80mm Diameter 200mm length bottle-capacity : 4ea12RT-6 60mm Diameter 200mm length bottle-capacity : 6ea
Model Number DescriptionPAK6 EXELUTOR/capacity-6 samples
It is possible to purify samples within an hour. You can apply agarose and poly-acrylamide gel slices including nucleic acide or protein on the EXELUTOR Pak6and apply at 25~35V for 2~5min.In case of incomplete elution, a second attempt can be made by replacing thebuffers.The Elution time is flexible according to the kinds and sizes of samples and incase of linear DNA, 4min is sufficient for the size up to 10kb.Eluted DNA can be extracted with phenol / chloroform once and then ethanol-preciitated according to the routine methods. High yield of more than 90%.Since disposable parafilm is used for the sample plate, you don’t have to worryabout contamination.0.2~0.5ml of buffer is sufficent for elution.There is nearly no trouble.It is easy to handle.
PAK6
ACCESSORIESHow to Use1 Lift up the top plate
and fix it up by the stopping knob.
8 Control the voltage in the between 20V~40V on power supply. If the voltage is over 50V. Thelamp and elec-trodecould defected.
2 Place the disposableparafilm under the electronic ring.
9 Turn on the switch.
3 Place a gel slice on the center of the electronic ring.
10 Come out small bubbles from gel slice.
4 Lift the top plate down.
11 Using UV lamp. The DNA coming out from gel slice could be seen.
5 The Electrode should be touched on the gel slice.
12 After 2~4min. Turn out the switch.
6 Pull the buffer out inside the electronic ring enough to coverthe gel slice.
13 Lift the top plate.
7 Confirm the switch and the lamp off.
14 Absorbing the buffer by a pipet.
Economical & quickest equipment with the best yield.95% elution within 4minutes.(DNA, RNA, PROTEIN)Sturdy, small and easy to handle.6 different samples can be applied simultaneously.0.2~0.5ml of buffer is sufficient for elution.
Model Number DescriptionST5, 110V 5 point magnetic stirrer
ST5, 220V 5 point magnetic stirrer ST5, 230V 5 point magnetic stirrer CE cert.ST10, 110V 10 point magnetic stirrer ST10, 220V 10 point magnetic stirrer
ST10, 230V 10 point magnetic stirrer CE cert.
Low profile - High performanceMulti-position magnetic stirrers, without heatingHigh quality permanent DC brushless motor for quiet andpowerful stirringVariable speed control form 0 to 1,300rpmStainless steel top plate for the protection against thepenetration of liquidsStable low profile body for convenient and safe experiment
SK-series fits nearly everywhere for world-wide use inlaboratory.Polyethylene, polypropylene films can be easily sealed.Easy to handle with convenient and reasonable structure.Powerful transformer and high quality circuit componentsguarantee years operation.
FINEPCR have been working by triangle organization for develop, manufacturing, marketing and sales companies.Each companies specialize in their own work and support each other very closely.Therefore, We are very flexible and solve the customer`s demand without delay.