Installation instruction Bluetooth hands free kit FISCON www.kufatec.de Kufatec GmbH • Dahlienstr. 15 • 23795 Bad Segeberg • Tel: +49(0)4551 80810-0 • Fax: +49(0)4551 80810- 50 • e-mail: [email protected]Version 1.10 „Basic-Plus“ article-ID 36431 head unit RNS-E BNS 5.0 head unit Concert (A4 8K, A5 8T)** Symphony (A4 8K, A5 8T)** „Basic“ article-ID 36430 head unit Chorus II Concert II Symphony II „Basic“ article-ID 36429 head unit Chorus III (Double DIN) Concert III (Double DIN) Symphony III (Double DIN) head unit RNS-E BNS 5.0 *from model 2000 *from software index 1.43 Audi A3 (8P) Sportback, Cabrio Audi A4 (8E) B6, B7 Audi A6 (4B)* Audi TT (8J) Roadster, Coupe´ Audi A4 (8K) Audi A5 (8T)
15
Embed
Version 1.10 Installation instruction Bluetooth hands free ...3 Installation instruction - A3 (8P), A4 (8E), A6 (4B), TT Please remove the head unit using suitable tools, after removing
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Installation instruction Bluetooth hands free kit
FISCON
www.kufatec.deKufatec GmbH • Dahlienstr. 15 • 23795 Bad Segeberg
Kufatec GmbH supplier reserves the right to change the device specifications without notice.
NOTE: Before installing the FISCON system you need to check whether the car is retrofitted with a video interface not developed by Kufatec GmbH. In case a non-Kufatec video interface is fitted we arenotabletoguarantytheabsoluteoperationoftheFISCONsystem.Youmayneedtoremovethenon-Kufatecvideointerface.
Inordertoachieveapropercommunicationyouneedtokeepinstallationsequenceasfollows: Vehicle FISCON Multimedia (IMA, TV in motion)
NOTE: The road traffic has to have your full attention.Telephone operations should only be done by suitable traffic and weather situations.Thevolumeneedtobesetthatyouarestillabletorealiseacousticwarnsignals(Police, fire brigade).
3
Installation instruction - A3(8P),A4(8E),A6(4B),TTPleaseremovetheheadunitusingsuitabletools,afterremovingdisconnectthenecessarywiring.With a plug & play connection you will complete the fitting of the hands free kit. Please see scheme below. Unlocktheconnectionandputthedeliveredwiringbetweentheheadunitandtheconnectorcomingfromthevehicle.Wiretheloomfortheinterfaceconnectiontowardstheglovebox.Findasuitablelocationfortheinterfaceboxwithinthevehicle.Makesureyouwillreachtheinterfaceatanytime(regardingtosoftwareupdates).
ATTENTION: Does the vehicle have airbags fitted along the A-column it is essential to wire the loom forthemicrophoneBEHINDtheairbag.Wiretheloomwithoutputtingtensiononit.
TheconnectorforthemicrophonehastobewiredalongtheA-columntowardsthesunshield.NOTE: Regarding to the voice quality do not fit the microphone covered inside the interior light.
in addition Audi A4 8E Adresse16(Steeringwheel) 02xxx 03xxx
Audi TT 8Jin addition Audi A3 8PAddress19(CANGateway)Byte03Bit7Telephone
With a plug & play connection you will complete the fitting of the hands free kit. Please see scheme below. Unlocktheconnectionandputthedeliveredwiringbetweentheheadunitandtheconnectorcomingfromthevehicle.Wiretheloomfortheinterfaceconnectiontowardstheglovebox.Findasuitablelocationfortheinterfaceboxwithinthevehicle.Makesureyouwillreachtheinterfaceatanytime(regardingtosoftwareupdates).
ATTENTION: Does the vehicle have airbags fitted along the A-column it is essential to wire the loom forthemicrophoneBEHINDtheairbag.Wiretheloomwithoutputtingtensiononit.
TheconnectorforthemicrophonehastobewiredalongtheA-columntowardsthesunshield.NOTE: Regarding to the voice quality do not fit the microphone covered inside the interior light.
PIN Configuration in order to connect the FISCON system to after market radios.You need to connect in addition the following PIN‘s to the after market radio (Blue marked figures).
BychoosingthemenuSTART A2DP thesystemwillhaveaccesstothemusicfiles stored on the mobile phone (ifsupportedfrommobilephone).By using the scroll you can choose the single files.For vehicles without MFSW you need to select the music files through themobilephone.Assoonasyoustartplayingmusiconyourmobilephoneitwillbetransferedtothespeakersofthevehicle.
Does the vehicle not have factory fitted Hands free kit image 4 will appear by choosing the TEL button.As soon as the installation as well as the coding has been finished and the interface is connected thetelephonescreenwilldisplayimage5.
Answer a callInordertoansweracallpleaseselectthebuttonAnnehmen (answer).WouldyouliketoendacallpressthebuttonAuflegen (end).
Placing calls
Dial plate
Operating instruction „Basic-Plus“ - RNS-E
Answer a second callIncaseofreceivingasecondcallduringanalreadystartedconversationthescreenwillshowimage11.Byusingtheknobyouareabletoswitchtothesecondcallaswellasignorethesecondcall.
Enter Bluetooth PINIncaseyouwanttochangetheBluetoothPINpleasepressSETUP aswellas Telephone settings. Pleasecompleteprocedureshownonimage13-15.ByusingtheknobyouareabletoenterandstoreanewBluetoothPIN.
Image13 Image14 Image15
Enter Mailbox numberPressSETUP andchoosethemenuitemMailbox number.Nowyouareabletoenteryourpersonalmailboxnumber(Image16).
Image16 Image17
A2DP AudiostreamingByusingtheMFSWyouwillselectthemenu A2DP. BychoosingthemenuSTART A2DP the system will have access to the music files stored on the mobile phone (if supported by mobile phone). By using the scroll you can choose the single files.For vehicles without MFSW you need to select the music files through the mobile phone.Assoonasyoustartplayingmusiconyourmobilephoneitwillbetransferedtothespeakersofthevehicle.
Idonothavetheguidedmenuwithinthecluster. •Guidedmenuthroughtheclusterjustavailableforvehicleswithmultifunctionalsteeringwheel. •ForvehiclesnotequippedwithMFSWyouneedtooperatethehandsfreekitbymobilephone. • The system need to be coded specific to the radio as well as vehicle (see coding page 3, 5, 6).
TheFISCONsystemwon‘tbeacceptedbythevehicle. •In case a non-Kufatec video interface is fitted we are not able to guaranty the absolute operation of theFISCONsystem. •AnymobilephonepreparationswhicharecommunicatingwiththeCANBussystemofthevehicle havetoberemoved! • The system has to be coded specific to the radio as well as vehicle (see coding page 3, 5, 6). •AftercodingyouneedtocompleteaRESEToftheheadunitRNS-E.
Idon‘thaveanyaccesstothephonemenuslike„Dialednumbers“,„Acceptedcalls“,„Missedcalls“. •Thesefeaturearenotsupportedbyallmobilephones.Pleasecheckcompatibilitylist! • The system need to be coded specific to the radio as well as vehicle (see coding page 3, 5, 6). •Guidedmenuthroughtheclusterjustavailableforvehicleswithmultifunctionalsteeringwheel.