Versatility without limits IP 500 DESKTOP DISPENSER · Versatility without limits: IP-500 DESKTOP DISPENSER Your partner for innovative processes and production systems. Vogelherdstrasse

Versatility without limits:

IP-500 DESKTOP DISPENSER

Your partner for innovative processes and production systems.

Vogelherdstrasse 4 І CH-4500 Solothurn І Tel. +41 32 626 36 60 І Fax +41 32 626 36 69 [email protected] І www.infotech-automation.com

Electronics

Semiconductor

Watch assembly

Micromechanics

Photonics

Biotechnology

Infotech Application range

Infotech Component matrix

Infotech designs, produces and delivers highest accuracy positioning systems for the automatic execution of precision processes with the comprehensive component matrix: PLATFORMS - ASSEMBLY - DISPENSE - FEEDER. Processes which have been deve-loped on IP-Desktop systems, can be transferred to the production line without modifications.

Component matrix DISPENSE

Dots, lines, geometric patterns 2D / 3D

X-, Y-, Z-axis and valve synchronized with continuous motion path control

Time/pressure dispense units

Archimedes screw dispense units

Precision micro screw dispense units

Jet dispense units

Slider dispense units

Piston dispense units 1C- and 2C- adhesive

Syringe and needle heaters

Automatic amount (parameter) adjustments

Automatic Z-needle length calibrations

Automatic X- and Y-offset calibrations

Purge, scale, and calibration stations

Dispense purge and cleaning tape units

Dispense needle cleaning stations

Component matrix PLATFORMS

IP - 500 Desktop IP - 500 Cell IP - 510 Cell IP - 520 Cell

Travel range X 400 mm 400 mm 2 x 144 mm 210, 270, 400, 540 mm

Travel range Y 400 mm 400 mm 400 mm 400 mm

Axes resolution X/Y 0.0002 mm (0.2 µm) 0.0002 mm (0.2 µm) 0.0002 mm (0.2 µm) 0.0002 mm (0.2 µm)

Repeatability +/-0.010 mm @ 3σ +/-0.010 mm @ 3σ +/-0.010 mm @ 3σ +/-0.008 mm @ 3σ

Process accuracy * +/-0.020 mm @ 3σ +/-0.020 mm @ 3σ +/-0.020 mm @ 3σ +/-0.018 mm @ 3σ

Cycle time “T/P” ** 7’000 dots/h 10’000 dots/h 20’000 dots/h 15’000 dots/h

* Accuracy definitions are based on dot on glass dispensing with camera measurement and camera verification ** Cycle time is based on dot on glass dispensing using time/pressure dispenser

IP-Desktop dispensers are available as a base for easy dispense applications. With available options from the Infotech dispense component matrix, the systems can be up-scaled for any possible complex dispense applications. Synchronized 2D dispense patterns as well as 3D patterns can be easily processed. Vision process can be configured for easy setup and verification purposes.

IP-500 Desktop DISPENSER

IP-Desktop Dispenser BASE and TIMEPRE CONFIGURATION

IP-Desktop Dispenser DISPENSE HEAD OPTIONS

The ultimate multi-functional dispense desktop system with a wide open application range for combined 2D (X, Y) and 3D (X, Y, Z) miniature fluid handling for manual, semi automated, or fully automated operations:

X-, Y-system with linear motors and linear encoders, where the substrates or the objects are fixed and not moving

Distributed and synchronized closed loop motion system with optional GigE guided vision control system

PC user interface with graphical dispense pattern editor (Optionally CAD-import and import based on Gerber-files)

Vision support for teach operations, for fiducial reading, to calibrate needle positions or to verify dispense results

Time/pressure dispense head included with the base package, optional precision micro screw- or different jet-dispense heads

Flexible board or substrate carrier for single or multiple image support, easily adjustable for different dimensions

Purge station, strip off station and manual camera calibration unit included with the base package

Optional needle cleaning unit, calibration and cleaning tape unit, up- and down-looking height probes or weight scale

Automatic needle offset calibrations for X-, Y- and Z- directions (for the X- and Y-offsets calibration, the vision option is needed)

All process related parameters with automatic calibration methods, based on the system configuration

Optional visual inspection, the dispensed pattern can be inspected directly after material deposition (with vision option)

IP-500 Desktop Dispenser Time/Pressure base configuration The system is ready to dispense using an internal time/pressure control system. The parameter time can be defined in the ap-plication program. The parameter pressure can be adjusted manually for easy setup (optional programmable available). The time/pressure valve is close to the syringe and includes hold back vacuum to prevent the syringe from dripping. The following modules are included with this configuration:

IP-500 Desktop with X 400 mm, Y 400 mm and Z 150 mm

PC-Control module incl. TFT-monitor and RAID-controller

SW-License VisualMachinesTM (desktop application soft-ware)

Time/pressure dispense unit with internal controller

Time/pressure dispense interface centered on the Z-axis

Dispense purge station incl. strip off wire

Up looking touch probe integrated within purge station

Packaging for desktop system Substrate holder and vision system as shown is application spe-cific and is not included within the base configuration!

IP-500 Desktop Dispenser - Dispense head options The base configuration includes an internal time/pressure controller. This configuration can be upgraded with alterna-tive dispense head types:

Precision micro screw dispense unit with rotary drive

Jet-dispense heads P-Dot, P-Jet, P-Jet CT (Liquidyn)

Jet-dispense heads (Picodostec-EFD Nordson or Vermes) Each dispense head type can be configured application spe-cific with multiple dispense head options. All dispense valves use the standardized Luer-Lock® interface for the syringe and for the dispense needles, where needles are needed. Different needle types, diameters and lengths are available. Syringe sizes of 3 cc, 5 cc, 10 cc, 30 cc or 50 cc sizes are available. Third party dispense controller can be adapted with an inte-grated special interface.

Your partner for innovative processes and production systems.

Vogelherdstrasse 4 І CH-4500 Solothurn І Tel. +41 32 626 36 60 І Fax +41 32 626 36 69 [email protected] І www.infotech-automation.com

IP-Desktop Dispenser DISPENSE PERIPHERAL OPTIONS

Information without warranty; Copyright Infotech AG 2013, Visual Machines™ is a protected trademark of Infotech AG

VISION - Vision processing The option VISION includes the Vision Cognex Vpro license and the down looking camera unit with 1296 x 966 pixels and a field of view of 16 x 12 mm:

Automatic camera and offset calibrations

Coaxial- and ring light illumination

Moves into the correct focus height

Can be used for teach in purposes

Reads fiducials or shapes for orientation

Inspecting dispensed patterns Camera configurations with different field of views or resolutions are available upon request

ZHEIGHT - Z-Height measurement The option ZHEIGHT includes the single pneumatic Z-slide and the down looking touch probe which can be attached together onto the Z-axis:

Automatic touch probe calibration

Automatic Z-height calibration e.g. on substrates

Height measurements including 2.5D processes

Accuracy 0.003 mm @ 3σ

Moves in Z-direction onto different heights

Optimal when using dispense needles to calibrate the difference in length automatically

Can be calibrated automatically

MICROSCREW - Micro precision screw dispense unit The option MICROSCREW includes the dispense pump with a micro precision lead screw to displace the media volumet-ric. It is specifically designed for dispensing micro volumes of filled material in precise, repeatable patterns.

Pump can be removed easily together with the syringe, fast and simple to clean

Optional with pump heating

10 cc cartridges (optional other sizes)

10 mm Luer-Lok® style needles (optional ¼“, ½“, 1“ or ceramic precision needles)

The option SCREW is using a plastic screw

JET - Jet-dispense unit for micro dispensing The option JET can be used to jet lubricants grease or oils, colors, silicones, gels, organic solvents, epoxies, adhesives and many other liquids. Allows touchless dispensing of any dispense patterns.

Easy exchange of the dispense valve togeth-er with the syringe, fast and simple to clean

Optional with nozzle heating

10 cc cartridges (optional other sizes)

JET LIQUIDYN

JET PICODOSTEC (optional)

JET VERMES (optional)

CARRIER - Substrate holder / Circuit board holder The option CARRIER includes a flexible support and clam-ping mechanisms for different dimensions of substrates, circuit boards or other objects.

Easy clamping of objects

Supports sizes of 300 x 400 mm

Spring loaded clamping

Easy to be removed for other applications

NEEDLECLEAN - Dispense needle cleaning station

Cleans needles touchless

Can be removed easily, fast and simple to clean

Based on compressed air, no vacuum needed SCALE - Dispense process control weight scale

Controls and regulates the dispense amount

Parts in contact with media can be easily re-moved , fast and simple to clean

Dispense location guided from the environment

PURGETAPE - Purge-, Calibration- and Cleaning tape The dispense purge tape unit can be used for all dispense unit types as purge unit and as calibra-tion unit together with the option VISION.

2D Dot or matrix measurement (3D optional)

With automatic tape advance

Optional PURGETAPECLEAN with the cleaning tape for Jet-dispense units

Easy removable to exchange tapes

FURTHER OPTIONS - Infotech Component matrix

IP-500 Desktop machine table

IP-500 Desktop workspace, with safety shields

Programmable cartridge pressure

SW-License Traceability

SW-License CAD-Data import

Different application plates

... Please ask for your requirement and further options!