VERIFICATION ―I verify that, I have read this report and from my opinion this thesis have fulfill the scope and quality requirement for Bachelor Mechanical Engineering (Structure and Material)‖ Signature : ………………………… Supervisor Name : MR. RAZALI BIN MOHD TIHTH Date : …………………………
24
Embed
VERIFICATION - eprints.utem.edu.myeprints.utem.edu.my/4591/2/R66_Bus_Superstructure_Concept_Desig… · R66 BUS SUPERSTRUCTURE CONCEPT DESIGN DEVELOPMENT LAW SOO HAR This report is
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
VERIFICATION
―I verify that, I have read this report and from my opinion this thesis have fulfill the
scope and quality requirement for Bachelor Mechanical Engineering
(Structure and Material)‖
Signature : …………………………
Supervisor Name : MR. RAZALI BIN MOHD TIHTH
Date : …………………………
R66 BUS SUPERSTRUCTURE CONCEPT DESIGN DEVELOPMENT
LAW SOO HAR
This report is submitted as partial requirement for the completion of the
Bachelor of Mechanical Engineering (Structure and Material) Degree Program
Faculty of Mechanical Engineering
Universiti Teknikal Malaysia Melaka
APRIL 2009
i
DECLARATION
―I hereby, declare this thesis is result of my own research except as cited in the
references‖
Signature : ………………………….
Author Name : Law Soo Har
Date : ………………………….
ii
DEDICATION
To
My Beloved Family
My Parent
Yin Teng
iii
ACKNOWLEDGEMENTS
Final year project is requisite to fulfill the Bachelor of mechanical
engineering. This report was written in order to fulfill the requirement of Bachelor of
mechanical engineering for Final Year Project. I was thankful to manage this report
writing on time.
In order to finish my project and make it successful, I owe a debt of thanks to
all those time, concern and efforts were given during the process of this project. Thus,
my heartfelt gratitude is extended to my beloved advisor; Mr. Razali Bin Mohd Tihth
who gives me advises and guides me in the project of ―R66 Bus Superstructure
Concept Design Development‖. He is always pushes me and giving many of
criticism, and always checking the progress.
Thanks to all my coursemates because they are always gave me some opinion
and comments on this project. Thanks also to my parents that understand my
situation, giving extra money for go somewhere, doing research and print it as a
report.
I would like to pray for you all with good health, and always happy.
iv
ABSTRAK
Masa sekarang, bas merupakan bahagian integral dari sistem pengangkutan
kebangsaan. Meskipun bas adalah salah satu sarana yang paling dalam angkutan
umum, tapi penghuninya kecederaan dan kematian di bas crash akan terjadi. Tingkat
kecederaan serius dan kematian ahli dalam kemalangan ―rollover‖ lebih tinggi bila
dibandingkan dengan semua jenis kemalangan. Dengan selalu meningkatkan
kesedaran untuk keselamatan penumpang, lebih diinginkan untuk mengembangkan
struktur bas hanya mempunyai kekuatan untuk memenuhi keselamatan penumpang.
Oleh kerana itu, kekuatan ―rollover‖ telah menjadi isu penting bagi pengeluar bas
dan jurulatih. Parti kerja (UNECE) telah membiarkan PADU R66 peraturan yang
berkaitan dengan perlindungan dan kekuatan bas struktur dalam kemalangan.
Objektif dari projek "Pembinaan reka concept Bas R66 Suprastruktur" adalah
reka ―data digital‖ untuk reka konsep bas chassis yang sesuai dengan R66 dan
mengembangkan reka konsep struktur bas akhir yang sedang dipertimbangkan
aplikasi yang optimum dalam hal berat badan, bahan, dan proses pembuatan. Projek
ini dibahas perkembangan terhadap struktur bas dari teori impak analisis atapnya
menghancurkan dan ―rollover‖ di ADAMS-View. ADAMS-View perisian ini
digunakan untuk mensimulasikan ―rollover‖ bas. Tenaga pergerakkan, kelajuan, daya
impak apabila impak di atas lantai dan sudut bas dengan lantai sebelum impak diukur
dalam ADAMS-View dan kemudian digunakan sebagai masukan untuk analisis teori
impak. Analisis kelengkungan struktur bas dengan menggunakan perisian MSC.
Patran dan MSC. Nastran untuk membandingkan keputusan dengan keputusan
daripada cara pengiraan teori impak. Menurut regulasi ECE-R66, seorang
penumpang ruangan kelangsungan hidup ditakrifkan dalam model bas untuk
memeriksa sama ada kerosakkan ke dalam ruangan kelangsungan hidup selama atau
setelah ―rollover‖. Hal ini memastikan bahawa struktur bas mempunyai cukup
kekuatan untuk menghindari kerosakkan ke ruangan kelangsungan hidup.
v
ABSTRACT
Nowadays, buses are an integral part of the national transportation system.
Although buses are one of the safest means of public transportation, but the occupant
cause in injuries and fatalities in bus crashes still occurred. The rate of serious
injuries and fatalities of occupants in rollover accidents is higher compared with all
other types of accidents. With the ever-increasing awareness for the occupant’s
safety, it is much desired to develop the bus structure which has enough strength to
meet the safety norms. Therefore, rollover strength has become an important issue
for buses and coaches manufacturers. The working party of the United Nations
Economic Commission for Europe (UNECE) had allowed the relevant regulation
ECE R66 deals with occupant protection and strength of bus superstructure during
accident which involved rollover.
The purpose of this project, ―R66 Bus Superstructure Concept Design
Development‖ is to design a digital data for bus chassis concept which comply with
R66 regulation and develop the final bus structure concept which being considered
the optimum application in term of weight, material, compliances, and manufacturing
process. This project is discussed the development of bus structure from theoretical
impact analysis of its roof crush in rollover analysis using ADAMS-View. ADAMS-
View software was used to simulate the rollover of the bus. Bus kinetic energies,
velocities, impact force of bus structure on the ground and its angle with the ground
just before impact was measured in ADAMS-View. By using these inputs for the
calculation structure deformation and energy absorb by bus structure using
theoretical impact calculation is execute. On the other hand, bus structure
deformation analysis by using MSC. Patran and MSC. Nastran is used for the
comparison purpose to the gain from theoretical impact calculation method.
According to the ECE-R66 regulation, a passenger’s survival space is defined in the
bus model to check whether, there is any intrusion into the survival space during or
after the rollover. This is to ensure the bus structure has sufficient strength to avoid
intrusions into the survival space.
vi
TABLE OF CONTENT
CHAPTER TITLE PAGE
DECLARATION i
DEDICATION ii
ACKNOWLEDGEMENT iii
ABSTRAK iv
ABSTRACT v
TABLE OF CONTENT vi
LIST OF TABLES xxi
LIST OF FIGURES xiii
LIST OF GRAPHS xvii
LIST OF SYMBOLS xviii
LIST OF APPENDICES xix
CHAPTER 1 INTRODUCTION 1
1.1 Background 2
1.2 Objectives 4
1.3 Scope of Works 5
1.4 Problem Statement 5
CHPTER 2 LITERATURE REVIEW 7
2.1 The Literatures on Any Things That 8
Related To Bus
2.1.1 History of Bus 8
2.1.2 Designs of Bus 9
2.1.3 Type of Bus 9
2.1.3.1 Single-deckers 10
vii
CHPTER TITLE PAGE
2.1.3.2 Double-deckers 10
2.1.3.3 Articulated Buses 11
2.1.3.4 Low-floor Buses 11
2.1.3.5 Bi-articulated 12
2.1.3.6 Open top 12
2.1.3.7 Coaches 12
2.1.3.8 Trolley Buses 13
2.1.4 The Use of Bus 14
2.1.4.1 Public Transport 14
2.1.4.2 Schools 15
2.1.4.3 Private Charter 15
2.1.4.4 Promotion 16
2.1.4.5 Not for Profit 16
2.1.4.6 Specialist Users 17
2.1.4.7 Tourism 17
2.1.5 Bus Manufacturing 18
2.2 The Interrelation Regarding the Bus 18
and the Structure
2.3 The Type of Chassis and Structure 21
Currently Available In the Bus
Industries
2.4 The Regulation That Related To the 23
Bus Structure
2.4.1 List of ECE Regulations 24
2.4.1.1 General Lighting 24
2.4.1.2 Headlamps 25
2.4.1.3 Instrumentation / Controls 25
2.4.1.4 Safety 26
2.4.1.5 Environmental / 26
Performance
2.4.2 The Regulations Used On Bus 27
Structure
viii
CHAPTER TITLE PAGE
2.5 The R66 Regulation and It’s 28
Important in Consideration during the
Bus Structure Design and Development
2.6 The Available Method of Testing 32
Related To the R66 Regulation
2.6.1 Full-scale vehicle rollover test 33
2.6.2 Bay Section Rollover Test 33
2.6.3 Bay Section Pendulum Impact 34
Test
2.6.4 Component Testing 34
2.7 The Available Method of Simulation 36
That Related To the R66 Regulations
2.7.1 Numerical Test Method 36
2.7.1.1 Numerical Simulation 37
Model for Vehicle
Structure
2.7.1.2 Numerical Simulation 39
Model for Occupant
Behavior
2.8 The Fundamental of Computer-aided 40
Engineering
2.8.1 CAE Fields and Phase 41
2.8.2 CAE in Automotive Industries 42
2.8.3 CAE Software 43
2.9 Finite Element Method (FEM) 44
2.10 Impact Analysis of a Falling Object 46
CHAPTER 3 METHODOLOGY 48
3.1 Method Used To Test the Bus 49
Structure to Achieve R66 Bus
Superstructure
ix
CHAPTER TITLE PAGE
3.1.1 The Reason of Method Use and 51
Software Chosen
3.1.1.1 ADAMS-View 51
3.1.1.2 Theoretical Impact 51
Impact Calculation
Method
3.1.1.3 Static Structural 52
Simulation Method
3.2 Process Flow of Bus Structure 53
Analysis and Simulation
3.3 Residual Space in Bus Model 56
3.4 Material Properties of Bus Structure 56
3.5 Bus Structure Deformation and Energy 57
Absorb Calculation Solution by Using
Theoretical Impact Analysis Method
3.6 Scenarios Investigate 59
3.7 Test Setup in ADAMS-View for 59
ECE-R66 Rollover Test
3.8 The consideration of ADAMS 62
Rollover Simulation
3.9 The Consideration of MSC. Patran and 63
MSC. Nastran Bus Structure
Simulation
CHAPTER 4 STRUCTURAL ANALYSIS RESULTS 64
4.1 Identification of Bus Structure 65
Dimension, Material and Mass
Properties
4.2 Dynamic and Kinematic analysis of 67
Rollover Bus Simulated by
ADAMS-View
4.2.1 ADAMS-View Analysis Setup 67
x
CHAPTER TITLE PAGE
4.2.2 ADAMS-View Analysis Results 68
4.2.2.1 Rollover Simulation with 68
Bus Structure Only
4.2.2.2 Rollover Simulation with 70
Bus Structure and
Passengers’ Weight
4.2.2.3 Rollover Simulation with 72
Bus Structure, Passengers’
Weight and Luggage
Weight
4.3 Calculation of Bus Structure 74
Deformation and Energy Absorb by
Bus Structure by Using Theoretical
Impact Calculation Method
4.3.1 Rollover Simulation with Bus 74
Structure Only
4.3.2 Rollover Simulation with Bus 76
Structure and Passengers’ Weight
4.3.3 Rollover Simulation with Bus 78
Structure, Passengers’ Weight
and Luggage Weight
4.4 The Simulation of Bus Superstructure 80
by MSC. Patran and MSC. Nastran
4.4.1 MSC. Patran and MSC. Nastran 80
Analysis Setup
4.4.2 The Results of Bus Superstructure 81
Simulation by MSC. Patran and
MSC. Nastran
4.4.2.1 Rollover Simulation with 81
Bus Structure Only
4.4.2.2 Rollover Simulation with 83
Bus Structure and
xi
CHAPTER TITLE PAGE
Passengers’ Weight
4.4.2.3 Rollover Simulation with 84
Bus Structure, Passengers’
Weight and Luggage
Weight
CHAPTER 5 RESULTS ANALYSIS AND 86
DISCUSSION
5.1 The Summary and Discussion of 86
Overall Results
5.2 The Comparison of Summary Results 90
With Results from TEMSA
CHAPTER 6 FINAL CONCEPT DESIGN 91
6.1 The Overview Design of Bus Structure 92
6.1.1 The Design of Rollover Bar 92
6.1.2 The Design of Cross Section of 94
Rollover Bar
6.2 The Material Properties of Bus 95
Superstructure
6.3 The Mass Properties of Bus 96
Superstructure
CHAPTER 7 CONCLUSION 98
7.1 Recommendations 99
REFERENCES 101
APPENDIX 1 105
APPENDIX 2 107
APPENDIX 3 108
APPENDIX 4 112
xii
LIST OF TABLES
NO. TITLE PAGE
1.1 Injury distribution in coach accidents, Spain 4
1995 – 1999. (Source: Martinez, (2003))
3.4.1 The details of material properties for carbon 57
steel (ASTM A500) (Source: Wikipedia (2010))
4.1.1 The important physical properties of the bus 66
structure
4.4.1.1 The value of impact force in difference 81
investigation scenarios
5.1.1 The summary of overall results 87
5.2.1 The comparison of summary results with results 90
from TEMSA
6.2.1 The details of material properties for high 96
carbon steel (ASTM A500 Grade A) based on
chemical composition, tensile strength, and heat
treatment. (Source: Wikipedia (2010))
6.3.1 The mass properties of carbon steel square 97
hollow section with standard material
– ASTM A500 Grade A
(Source: Markas Hardware Corporation)
xiii
LIST OF FIGURES
NO. TITLE PAGE
1.1 The percentage of rollover accident compared 2
with the others type of accidents.
(Source: NASS-CDS, (2001))
1.2 Buses involved in crashes with fatalities by 3
rollover occurrence, 1999 – 2003.
(Source: National Institute of Aviation Research
, (2005))
2.1.3.2.1 Double-decker of Kowloon Motor Bus, Hong 10
Kong. (Source: Wikipedia, (2008))
2.1.3.3.1 Volvo B10M articulated bus in Adelaide, South 11
Australia. (Source: Wikipedia, (2008))
2.1.3.7.1 Coaches parked at Chicken Itza, Mexico. 13
(Source: Wikipedia, (2008))
2.1.4.1.1 A local transit bus in Canberra, Australia. 14
(Source: Wikipedia, (2008))
2.1.4.4.1 All-over advert bus for Landsbanki in Iceland. 16
(Source: Wikipedia, (2008))
.1.4.6.1 A New York police bus converted for use as a 17
command post. (Source: Wikipedia, 2008))
2.2.1 Chassis bus and space frame bus, deformation 20
comparison. (Source: Technet-alliance, (1990))
2.2.2 City bus sidewall assembly. 20
(Source: Technet-alliance, (1990))
2.3.1 An AEC Routemster, a pioneering 1950s bus 21
design. (Source: Leyland Leopard, (2008))
2.3.2 A 1986 van derived Ford Transit minibus 22
xiv
bodied by Carlyle. (Source: Leyland Leopard,
(2008))
2.3.3 A Volvo B10M chassis, bodied worldwide as a 23
single-decker bus, articulated bus, double-decker
bus and coach. (Source: Leyland Leopard, (2008))
2.4.2.1 ECE R66 bus superstructure 28
(Source: Daimler, (2004))
.4.2.2 The optimized seat structures and obligatory 28