Autek AS, Hofgaardsgate 27, 3012 Drammen Phone: +47 32219200,Mail:mail@autek.no Rev. 8 ‐ 2013 Venturi Meters Benefits Options • High Accuracy, precision machined venturi • Minimal maintenance required • Available in sizes from 2” to 60” • Manufactured to suit customers application • Used to measure a wide range and mediums • Short, long and truncated forms available • No moving parts = no maintenance • Design according to a well know standards • Exotic materials for demanding services – Duplex, 6MO (M650) • High pressure solutions • Wide temperature ranges • Meter Runs and instrumentation • Standard tapping’s or welded on piping valves • Specials for drilling, mud and subsea • Calibration with hot water or gas Autek Venturi Meters are manufactured to meet strict industry standards and safety guidelines and are designed to meet the end users expectations. Venturi meters are used on applications where a low permanent pressure loss is desired. This type of ‘Differential Pressure Meter’ can be used on a wide variety of flow mediums and include slurry, heavy oil, sludge, liquid, vapour, gas and high pressure steam. Autek Venturi meters are produced using 3 main manufacturing methods, selected to best suit the material and size of the meter. These are detailed in ISO 5167-4:2003 and permit the use of specific Beta ranges.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Benefits Options • High Accuracy, precision machined
venturi • Minimal maintenance required • Available in sizes from 2” to 60” • Manufactured to suit customers
application • Used to measure a wide range and
mediums • Short, long and truncated forms
available • No moving parts = no maintenance • Design according to a well know
standards
• Exotic materials for demanding services – Duplex, 6MO (M650)
• High pressure solutions • Wide temperature ranges • Meter Runs and instrumentation • Standard tapping’s or welded on
piping valves • Specials for drilling, mud and subsea • Calibration with hot water or gas
Autek Venturi Meters are manufactured to meet strict industry standards and safety guidelines and are designed to meet the end users expectations. Venturi meters are used on applications where a low permanent pressure loss is desired. This type of ‘Differential Pressure Meter’ can be used on a wide variety of flow mediums and include slurry, heavy oil, sludge, liquid, vapour, gas and high pressure steam. Autek Venturi meters are produced using 3 main manufacturing methods, selected to best suit the material and size of the meter. These are detailed in ISO 5167-4:2003 and permit the use of specific Beta ranges.
Distribution • NACE MR‐01‐75 • ASME B31.1 Power piping • ASME B31.3 Liquid Petroleum
Transportation • PED 97/23/EC ‐Pressure Equipment
Directive
Measurement Standards • ISO 5167‐4:2003 • ASME MFC‐3M
Painting
• NORSOK M501 • TR 0042 • Other on request
Autek Venturi meters meet all requirements according ISO5167‐4:2003, NORSOK and Statoil TR. Autek AS is certified according to ISO 9001:2008 and has procedures to meet customer’s requirement to offshore deliveries.
Autek can supply the following items for a complete metering solution;
• Venturi with upstream pipe • DP transmitter, temperature sensors with thermowell. • Flowcomputers and weather enclosure.
ANSI Class 150# (PN20)ANSI Class 300# (PN50) ANSI Class 600# (PN100) ANSI Class 900# (PN150) ANSI Class 1500# (PN250) ANSI Class 2500# (PN420) ANSI Class 4500# Z= Special
Bore XX,XX Bore mm Face‐to‐Face
dimension XX Face‐to‐Face in mm
Connection type FF
RF RTJ DN CF H ZZ
Flat FaceRaised Face RTJ DIN standard Compact Flanges HUB Z=Special
Material CS
SS DX SD MO TI CU PV ZZ
Carbon SteelSS 316, 316L Duplex (22Cr) Super Duplex (25Cr) 254 SMO (6MO) Titanium Copper/Nickel PVC Z= Special