Features • PSC motor • Bake d ena mel Gray finish • Heavy gauge ste el ho using • All position Mounting • Maximu m Ambie nt Temp erature 104°F • Sui tabl e for 50 Hz operation Additional Benefits • Permanen tly Lubrica ted Ball-Bearings • Extrude d Al uminum Blower Frame for Increased Rigidity • Auto -The rma l Pro tect ion Dayton ® PSC and Shaded Pole Blowers Specification Sheet 1TDR8 Description Dayton PSC and Shaded Pole blowers provide economical air delivery for general heating, cooling, ventilating, or component cooling. Typical applications include cooling greenhouses, blowers for wood and corn stoves, ventilating small buildings, cooling electrical enclosures and removing heat from machinery. The blowers are exact replacements for many OEM blowers with the same physical footprint. Forward curve wheels driven by Dayton motors are rated for continuous duty with all-position mount. These units incorporate balanced ball or sleeve-bearing motors with cast aluminum end shields. This provides greater heat dissipation and protection, reducing down time due to component failure and accidental damage. Direct drive blower wheels are dynamically balanced to reduce noise and vibration and to maintain CFM at higher static pressures. Dimensions in. (mm) 1TDR8* 358 350 330 310 300 280 258 235 180 230 0.54 60 Reference Numbe r CF M @0 ″ 0.1″ 0.2″ 0.3″ 0.4 0.5″ 0.6″ 0.7 0.8″ VOLTS AMPS HZ * Replaces 2C917 NOTE: Includes Conduit Box with 12 Lead Length. NOTE: Not suitable for use with speed-controlled devices. 1 1 . 1 6 4 ( 2 8 3 . 5 6 ) 10.436 (265.07) Ø5.358 (136.00) 7.480 (190) Ø 4 . 4 5 2 ( 1 1 3 . 0 0 ) 4 . 1 5 4 ( 1 0 5 . 5 ) 3.858 (98) 5 . 6 3 0 ( 1 4 3 ) Specifications 0 2.26 4.53 6.8 9.06 11.33 0 80 160 240 320 400 (CMM) (CFM) (inwg) (MMAq) 60HZ 1.2 0.96 0.72 0.48 0.24 0 30.48 24.38 18.29 12.18 6.10 0 Ø0.280 (7.1) 5.079 (129) 4.488 (144) 1 1 . 8 2 3 ( 3 0 0 . 3 1 ) 5 . 0 0 0 ( 1 2 7 ) CAP E47479 Motor Component Recognition