- 1. Hydraulic OilHYDROVEL R & O32, 46, 68, 100, 150, 220,
320, 460IS: 3098-1983 (RA 2004), DIN 51 524 PART 1PRODUCT
DESCRIPTION: HYDROVEL R & O grades are mineral oil based top
quality hydraulic oils having outstandingcorrosion protection /
oxidation inhibition properties. They are made from highly refined
base stocks and combination ofselected additives to give the
finished product with outstanding oxidation stability, water
separation capability and anticorrosion properties. The use of an
oil soluble type foam suppressant provides HYDROVEL R & O
series excellentantifoam characteristics.APPLICATION: HYDROVEL R
& O series are suggested for moderate hydraulic systems and
wide variety of circulatingsystems of industrial
equipments.PERFORMANCE LEVEL: Meets IS: 3098-1983 (RA 2004), DIN 51
524 PART 1These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.200Product Data SheetTypical Properties40-37-3
(30)40-37-3 (20)CHARACTERISTICS HYDROVEL R & OGrades 32 46 68
100 150 220 320 460Kinematic Viscosity @40C, cSt. 30-34 43-49 66-72
95-105 145-160 210-230 300-340 440 -480Viscosity Index, Min. 95 95
95 90 90 90 90 90Flash Point ,COC,C,Min. 190 200 220 220 220 230
250 250Pour Point, C, Max. (-)6 (-)3 (-)3 (-)3 (-)3 (-)3 (-)3
(-)3Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1 1 1Rust
prevention Test, 24 hrs. Passes Passes Passes Passes Passes Passes
Passes PassesFoam Characteristics: Foam stability after10 minutes
settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil Nil
NilEmulsion characteristics, Max.Rev.No. 01-01/04/2013
2. These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.PRODUCT DESCRIPTION : HYDROVEL AW grades are blends
of high viscosity index, chemically stable base oilsand specially
selected anti-wear, anti-oxidation, anti-rust and anti-foam
additives. These oils have gooddemulsibility characteristics. They
meet the requirements of very high pressure systems (1000 psi and
above) andalso of systems where high speed actuations are
desired.APPLICATION : HYDROVEL AW grades are extensively used to
actuate various mechanisms of special purposemachines, positive
displacement pumps such as axial, piston, vane and gear types etc.
They can also be used inenclosed gear boxes, compressors, chain
drives, machine tools, circulation oiling systems, etc.PERFORMANCE
LEVEL : HYDROVEL AW 32 TO AW 150 grades Meet IS 10522 1983 (RA
1998), DIN 51 524 PART 1.Product Data SheetHydraulic OilHYDROVEL
AW32, 46, 68, 100, 150, 220, 320, 460IS: 10522-1983(RA 1998), DIN
51 524 PART 1.Typical PropertiesCHARACTERISTICS HYDROVEL AWGrades
32 46 68 100 150 220 320 460Kinematic Viscosity @40C, cSt. 30-34
43-49 66-72 95-105 145-160 210-230 300-340 440 -480Viscosity Index,
Min. 95 95 95 90 90 90 90 90Flash Point ,COC,C,Min. 200 200 220 220
230 240 250 250Pour Point, C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6
(-)6 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1 1 1
1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes
Passes Passes PassesFoam Characteristics: Foam stability after10
minutes settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil Nil
Nil NilEmulsion characteristics,
Max.20040-37-3(20)40-37-3(30)Rev.No. 01-01/04/2013 3. 100These are
typical figures and do not constitute a specification. In pursuit
of continuous improvement, these figures may be changed without
notice atthe sole discretion of Nandan Petrochem Ltd.Hydraulic
OilHYDROVEL HLP32, 46, 68, 100, 150IS: 11656-1986 (RA 2002),DIN
51524 PART II,HLP TypePRODUCT DESCRIPTION: HYDROVEL HLP oils are
premium grade extra heavy duty antiwear hydraulic oils (HLP
Type)with outstanding thermal & oxidation stability and have
exceptional load carrying capacity as indicated by high FZGrating
(11 Stage Pass). These oils are blended from highly refined
selected base stocks fortified with high qualityantioxidant,
antiwear additives to satisfy the increased demands of thermal and
oxidation stability of modern fluids.These oils have excellent
hydrolytic stability, demulsibility, air release characteristic and
have good filterability.APPLICATION: HYDROVEL HLP are recommended
for high pressure hydraulic systems, especially for
sophisticatedhigh performance electro hydraulic or numerically
controlled system, in hydraulic couplings and drive motor
bearings.These oils can also be used in screw compressor and
enclosed gear boxes due to their outstanding thermal andoxidation
stability.PERFORMANCE LEVEL: Meets IS: 11656 -1986 (RA 2002), DIN
51 524 Part II, HLP TypeProduct Data SheetTypical
PropertiesCHARACTERISTICS HYDROVEL HLPGrades 32 46 68 100
150Kinematic Viscosity @40C, cSt. 30-34 44-48 68-74 95-105
145-160Viscosity Index, Min. 105 100 100 100 95Flash Point
,COC,C,Min. 200 200 220 250 250Pour Point, C, Max. (-)9 (-)9 (-)9
(-)6 (-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1 1 1Rust
prevention Test, 24 hrs. Passes Passes Passes Passes PassesTotal
Acidity (mg of KOH/g of oil) 1 1 1 1 1Foam Characteristics: Foam
stability after10 minutes settling time ,foam ml,seq I/II/III Nil
Nil Nil Nil NilEmulsion characteristics, Max. 40-37-3 (20) 40-37-3
(20) 40-37-3 (20) 40-37-3 (30) 40-37-3 (30)Rev.No. 01-01/04/2013 4.
IS: 11656-1986 (RA 2002),DIN 51524 PART IIIRev.No. 01-01/04/2013 5.
100These are typical figures and do not constitute a specification.
In pursuit of continuous improvement, these figures may be changed
without notice atthe sole discretion of Nandan Petrochem
Ltd.Spindle OilSPINVEL5, 12, 22IS: 493 , PART II - 1981 ( RA
2004)PRODUCT DESCRIPTION: SPINVEL Grades are blended from highly
refined hydrotreated oils and have beenincorporated with
antioxidant, antirust additives to meet the requirements of Textile
Machineries particularly. They havelow pour point, high viscosity
index and have good demulsibility characteristic also. They reduce
the rate of wear, lowerthe power consumption, eliminate spindle
sticking and protects against corrosion.APPLICATION: SPINVEL Grades
are suitable for high speed spindles in textile machineries
operating at very highspeeds and other machine tools where high
speed and moderate loads are encountered.PERFORMANCE LEVEL: Meets
IS: 493 PART II-1981 (RA 2004).Product Data SheetTypical
PropertiesCHARACTERISTICS SPINVELGrades 5 12 22Kinematic Viscosity
@40C, cSt. 4.5-5.5 11-13 20-24Viscosity Index, Min. 90 90 90Flash
Point ,PMCC**/COC,C,Min. **90 160 180Pour Point, C, Max. (-)6 (-)6
(-)6Copper strip Corrosion for 3 hrs @100C. 1 1 1Rev.No.
01-01/04/2013 6. These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.Machine OilMACHINEVEL32, 46, 68, 100, 150, 220, 320,
460IS: 493, PART I -1981 (RA 2004)PRODUCT DESCRIPTION: MACHINEVEL
grades blended from high viscosity index base stocks. They have
good inherentoxidation and thermal stability with excellent ability
to separate from water. MACHINEVEL oils are specially formulated
withadditives to improve adhesiveness and film strength
characteristics.APPLICATION: MACHINEVEL grades recommended
preferably for non-critical all loss lubrication systems and
otherapplications such as lubrication of bearings, open gears,
light loaded slides and guide ways of machine tools. They are
alsorecommended for lubrication of looms in the textile mills and
other applications which do not require additive
containinglubricants. These oils can also be used for flushing of
inaccessible internal surfaces of various automotive and
industrialequipment.PERFORMANCELEVEL:
MeetsIS:493(Part1):1981[RA2004]Product Data SheetTypical
PropertiesCHARACTERISTICS MACHINEVELGrades 32 46 68 100 150 220 320
460Kinematic Viscosity @40C, cSt. 30-34 44-48 66-72 95-105 145-155
216-224 315-325 450-470Viscosity Index, Min. 90 90 90 90 90 90 90
90Flash Point ,COC,C,Min. 200 200 220 220 220 240 250 250Pour
Point, C, Max. (-)6 (-)6 (-)6 (-)6 (-)6 (-)6 (-)3 (-)3Copper strip
Corrosion for3 hrs @100C. 1 1 1 1 1 1 1 150Rev.No. 01-01/04/2013 7.
200These are typical figures and do not constitute a specification.
In pursuit of continuous improvement, these figures may be changed
without notice atthe sole discretion of Nandan Petrochem
Ltd.Industrial Gear OilGEARVEL68, 100, 150, 220, 320, 460IS:
8406-1993(RA 2006), DIN 51517 Part 3PRODUCT DESCRIPTION: GEARVEL
grades are premium quality lubricants fortified with
sulphur-phosphorous type ofEP additives. They have excellent
anti-foam, anti-rust, anti-oxidation and demulsification
characteristics making themideal for systems subjected to heavy
shock loads. GEARVEL grades are marketed over a wide viscosity
ranges totake care of the variety of speed-load conditions
encountered by the industries. These oils contain chemically
activeadditives, which react with the metals of the gears teeth to
form an anti-welding film between them.APPLICATION: GEARVEL grades
are recommended for all heavy duty enclosed gear drives with
circulation or splashlubrication system operating under heavy or
shock load conditions up to a temperature of 100C.PERFORMANCE
LEVEL: Meets IS: 8406 1993 (RA 2006), DIN 51517 Part 3.Product Data
SheetTypical PropertiesCHARACTERISTICS GEARVELGrades 68 100 150 220
320 460Kinematic Viscosity @40C, cSt. 66-74 95-105 145-160 210-230
310-335 440-480Viscosity Index, Min. 95 95 95 90 90 90Flash Point
,COC,C,Min. 200 210 220 220 220 230Pour Point, C, Max. (-)6 (-)6
(-)6 (-)3 (-)3 (-)3Copper strip Corrosion for 3 hrs @100C. 1 1 1 1
1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes Passes
PassesFoam Characteristics: Foam stability after 10minutes settling
time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil NilRev.No.
01-01/04/2013 8. 200These are typical figures and do not constitute
a specification. In pursuit of continuous improvement, these
figures may be changed without notice atthe sole discretion of
Nandan Petrochem Ltd.GEARVEL PLUSIndustrial Gear
Oil68,100,150,220,320,460IS:8406-1993 ( RA 2006) DIN -51517 Part
3Typical PropertiesDESCRIPTION: GEARVEL PLUS range of oils are
Extra Premium quality lubricants fortified with
sulphur-phosphoroustype of EP additives. They have excellent
anti-foam, anti-rust, anti-oxidation and demulsification
characteristics makingthem ideal for systems subjected to heavy
shock loads. GEARVEL PLUS Oils are marketed over a wide
viscosityranges to take care of the variety of speed-load
conditions encountered by the industries. These oils
containchemically active additives, which react with the metals of
the gearss teeth to form an anti-welding film betweenthem.
Specialty Grade EP additives provides high tenacity and very high
load withstand features, with extremely lowevaporation
loss.APPLICATION: GEARVEL PLUS ranges are recommended for all heavy
duty enclosed gear drives with circulation orsplash lubrication
system operating under heavy or shock load conditions up to a
temperature of 100C. Gearvel Plus460 specially recommended for
crane gear boxes & Worm Gear boxes with extended oil change
intervals and minimumoil top up.PERFORMANCE LEVEL: Meet IS: 8406 -
1993 (RA 2006), DIN 51517 Part 3 specifications.Product Data
SheetCHARACTERISTICS GEARVEL PLUSGrades 68 100 150 220 320
460Kinematic Viscosity @40C, cSt. 66-74 95-105 145-160 210-230
310-330 440-480Viscosity Index, Min. 135 135 135 125 115 110Flash
Point ,COC,C,Min. 200 210 220 220 220 230Pour Point, C, Max. (-)6
(-)6 (-)6 (-)3 (-)3 (-)3Copper strip Corrosion for 3 hrs @100C. 1 1
1 1 1 1Rust prevention Test, 24 hrs. Passes Passes Passes Passes
Passes PassesFoam Characteristics: Foam stability after10 minutes
settling time ,foam ml,seq I/II/III Nil Nil Nil Nil Nil NilRev.No.
01-01/04/2013 9. TRANSVEL C-4 SAE 30Product Data SheetTypical
PropertiesThese are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.Transmission OILCharacteristics Test Method
SpecificationColour Visual RedK.Viscosity @100 C IS 1448 P: 25
9.3-12.5Viscosity Index, Min. IS 1448 P: 56 90Flash Point ,C,Min.
IS 1448 P: 69 160Pour Point,C, Max. IS 1448 P: 10 (-)18Product
Description : TRANSVEL C-4 SAE 30 Oil is blended using highly
refined virgin base stocks with specialadditives to impart high
oxidation stability, anti-wear, anti-rust, anti-foam and the
desired frictional characteristics inservice. It is compatible with
the seal material used in hydraulic transmissions systems. TRANSVEL
C-4 SAE 30 ishydraulic transmission to meet General Motors Detroit
Diesl ALLISON type C-4 specifications.Application : TRANSVEL C-4
SAE 30 oil is recommended for commercial power transmissions,
industrial torqueconverters and automatic transmissions
manufactured by AVTEC Ltd.,Hosur,erstwhile power products division
ofHindustan Motors Ltd,under License from General Motors USA.Such
hauling and cycling transmissions are fitted on awide variety of
Allison heavy duty automatic Transmissions fitted to On-highway and
off-highway equipmentse.g.Dumpers,scrappers,Shovel
loaders,Excavators,Crawler-Tractors,etc.,used in Mines, cement
quarries and Damconstruction sites etc.BENEFITS: Smooth operation
of precision hydraulic control systems. Smoother engagement /
disengagement of clutch, because of desired friction properties to
provide a soft shift feel. Provides Protection against wear, rust
and corrosion. Provide excellent seal life.PERFORMANCE LEVEL:
TES-228 for Hhydraulic transmission fluid type C-4 of Detroit Diesl
ALLISON Division ofGeneralGrade: TES 228Rev.No. 01-01/04/2013 10.
Transmission OILTRANSVEL SAE 10 WCharacteristics Test Method
SpecificationK.Viscosity @100 C, cSt IS 1448 P: 25 5.6Viscosity
Index, Min. IS 1448 P: 56 100Flash Point,C,Min. IS 1448 P: 69
200Pour Point,C,Max. IS 1448 P: 10 (-)27TBN mg KOH/gm, Min. IS 1448
P:86 8.0Sulphated Ash, mass % Max. IS 1448 P:4 1.50Product Data
SheetTypical PropertiesThese are typical figures and do not
constitute a specification. In pursuit of continuous improvement,
these figures may be changed without notice atthe sole discretion
of Nandan Petrochem Ltd.Product Description : TRANSVEL SAE 10W is
formulated with highly refined base oils combined with ash
lessdispersant, metallo-organic detergent and effective corrosion
and oxidation inhibitor to meet the performance
standards.Application: TRANSVEL SAE 10W oil is recommended for all
classes of supercharged diesel engines of high speedoutput such as
Heavy Duty Diesel Vehicles / Tractors, Earthmoving/off Highway
equipments, Transmission systems ofcaterpillar Equipment and large
generating sets.TRANSVEL SAE 10W meets the requirements of
Hydraulic fluid type C2 specification of Detroit Diesel Allision,
Division ofGeneral Motors Corporation, USA.BENEFITS Minimizes
deposits & wear Prevent Rust and Corrosion Maintain excellent
engine cleanliness Minimize deposits resulting from high output,
low speed, and low temperature operations. Excellent control of
cold sludge and corrosive wear Possess excellent oxidation
stability to ensure long service life especially in Transmission
systems.PERFORMANCE LEVEL: API CD, US MIL-L-45199B, IS: 13656-2002
E-DL2, Caterpillar Series 3API CD, MIL-L-45199B, IS: 13656-2002
E-DL2, Caterpillar Series 3Rev.No. 01-01/04/2013 11. These are
typical figures and do not constitute a specification. In pursuit
of continuous improvement, these figures may be changed without
notice atthe sole discretion of Nandan Petrochem Ltd.Compressor
OilCOMPRESSVEL68, 100, 150IS: 13256-1992(RA 2004) TYPE DAA, DIN
51506 VD -LPRODUCT DESCRIPTION: COMPRESSVEL grades are manufactured
from highly refined base stocks with oxidation,rust, corrosion and
foam inhibitors. They provide excellent lubrication under high
temperature and high load conditionswith low carbon-forming
tendency and protection against entrained air. COMPRESSSVEL grades
are designed toprovide superior thermal and oxidation stability and
rust protection.APPLICATION: COMPRESSVEL are recommended for use in
the cylinder lubrication of reciprocating and rotary aircompressors
operating up to 220C air discharge temperature.PERFORMANCE LEVEL:
Meets IS 13256 1992 (RA 2004) TYPE DAA, DIN 51506 VD LProduct Data
SheetTypical PropertiesCHARACTERISTICS COMPRESSVEL68 100
150Kinematic Viscosity @40C, cSt. 66-70 95-105 145-160Viscosity
Index, Min. 100 100 100Flash Point ,COC,C,Min. 230 230 240Pour
Point, C, Max. (-)12 (-)9 (-)6Copper strip Corrosion for 3 hrs
@100C. 1 1 1Emulsion characteristic ,Max 40-40- 40-40- 40-40-0(10)
0(10) 0(20)Rust Preventing characteristic Passes Passes
Passes200Rev.No. 01-01/04/2013 12. These are typical figures and do
not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.Machine Tool Way OilWAYVEL32,
68, 220PROPERITORY GRADEPRODUCT DESCRIPTION: WAYVEL grades are
manufactured from highly refined base stocks with high
oxidationstability and are formulated with oiliness, extreme
pressure, anti - foam and tackiness additives. These oils
providessmooth, chatter free operations by carrying out higher load
of machine tools with minimum stick-slip and improvedsurface finish
of the work pieceAPPLICATION: WAYVEL grades are recommended for the
lubrication of horizontal and vertical machine tool slide waysand
guides, planers, grinders, shapers etc.PERFORMANCE LEVEL:
Proprietary GradeProduct Data SheetTypical
PropertiesCHARACTERISTICS WAYVEL32 68 220Kinematic Viscosity @40C,
cSt. 30-34 64-72 210-230Viscosity Index, Min. 95 95 95Flash Point
,COC,C,Min. 190 210 240Pour Point, C, Max. (-)3 (-)3 (-)350Rev.No.
01-01/04/2013 13. 100These are typical figures and do not
constitute a specification. In pursuit of continuous improvement,
these figures may be changed without notice atthe sole discretion
of Nandan Petrochem Ltd.Heat Transfer OilTHERMVEL32, 100PROPERITORY
GRADEPRODUCT DESCRIPTION: THERMVEL grades are highly refined
mineral oils with exceptional inherent oxidationstability, strong
thermal stability and good heat transfer properties for use as
Industrial Heat transfer Fluids .These Oilsalso possess low
Volatility to minimize evaporation loss in the open systems and low
vapour pressure to eliminatevapour lock in the circulating pumps
for long and trouble free service life in heat transfer
systems.APPLICATION: THERMVEL grades are recommended for use as
heat transfer fluids in well-designed open heat transfersystems
operating up to 260C and up to 300C for closed system. The products
find extensive applications in Textile,Pharmaceuticals, Chemicals
and other processing Industries.PERFORMANCE LEVEL: Proprietary
GradeProduct Data SheetTypical PropertiesCHARACTERISTICS
THERMVELGrade 32 100Kinematic Viscosity @40C, cSt. 30-34
95-105Viscosity Index, Min. 95 95Flash Point ,COC,C,Min. 190
210Pour Point, C, Max. (-)3 (-)3Operating Temperature Range,C
260-300Rev.No. 01-01/04/2013 14. Heat Transfer OilTHERMVEL
SPECIAL32, 100PROPERITORY GRADEPRODUCT DESCRIPTION: THERMVEL
SPECIAL grades are blended from light coloured high viscosity index
basestocks having good oxidation and thermal stability with
specially selected antioxidants for extra long service life of
theseIndustrial Heat Transfer fluids. These Industrial Heat
Transfer fluids have also very low level of volatility, vapour
pressure,sulphur content and CCR value to provide superior
performance.APPLICATION: THERMVEL SPECIAL grades are recommended
for use as heat transfer fluids in well-designed openheat transfer
systems operating up to 280C and up to 315C for closed system. The
products find extensiveapplications in Textile, Pharmaceuticals,
Chemical and other processing IndustriesPERFORMANCE LEVEL:
Proprietary GradeProduct Data SheetTypical
PropertiesCHARACTERISTICS THERMVEL SPECIAL32 100Kinematic Viscosity
@40C, cSt. 30-34 95-105Viscosity Index, Min. 110 100Flash Point
,COC,C,Min. 200 230Pour Point, C, Max. (-)9 (-)9Operating
Temperature Range,C 280-315These are typical figures and do not
constitute a specification. In pursuit of continuous improvement,
these figures may be changed without notice atthe sole discretion
of Nandan Petrochem Ltd.100Rev.No. 01-01/04/2013 15. 200Soluble
Cutting OilCUTVEL SIS:1115 - 1986 (RA 2002)PRODUCT DESCRIPTION:
CUTVEL S is a MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from
carefullyselected paraffinic base oils and proprietary emulsifiers
which have a bearing on the stability of the emulsioneven with
water of 400 ppm hardness. A stable milky white emulsion is
prepared by adding the oil to water withcontinuous stirring. CUTVEL
S gives the desired cooling characteristics, provides rust
protection, lubricity for the cuttingoperation with good finish of
work piece and longer life for tools. CUTVEL S is also fortified
with appropriate biocides tokeep control of bacterial
growth.APPLICATION: CUTVEL S is recommended for a variety of
cutting operations on both ferrous and non-ferrous metals.For
general machining operations the emulsion is normally prepared with
5% oil and for grinding operation theemulsion has 2% of oil.CAUTION
: Not recommended for machining of magnesium as fine chips of
magnesium is a fire hazard whenmoistened with water.PERFORMANCE
LEVEL: Meets IS 1115-1986 (RA 2002).Product Data SheetTypical
PropertiesCHARACTERISTICS CUTVEL SWater, % mass, Max. 10.0Copper
strip corrosion at 100C for 3 Hrs, Max. 1 (a)Emulsion Stability
Test ,5:1 and 20:1 ratio inwater of 400 ppm hardness PassesThermal
stability Test PassesAsh, % by mass, Max. 3.5Frothing Test , 5:1
and 20:1 ratio in water of 200 ppm PassesFlash Point,COC,C, Min.
150Cast Iron corrosion test 0/1-1These are typical figures and do
not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 16.
200DESCRIPTION: CUTVEL S PLUS is a PREMIUM SOLUBLE CUTTING OIL
manufactured from carefully selectedparaffinic base oils and
proprietary emulsifiers which have a bearing on the stability of
long lasting emulsion evenwith water of 400 ppm hardness.CUTVEL S
PLUS gives the desired cooling characteristics and effective foam
control, provides rust and corrosionprotections with required
lubricity for the cutting operations with good finish of work
pieces and longer life for tools.CUTVEL S PLUS is also fortified
with appropriate biocides to keep control of bacterial growth even
during machineshutdown period.A stable milky white emulsion is
prepared by adding the oil to water, with continuous
stirringAPPLICATION: CUTVEL S PLUS is recommended for a variety of
cutting operations on both ferrous and non-ferrousmetals. For
general machining operations the emulsion is normally prepared with
5 % oil and for grindingoperation the emulsion has 2% of
oil.CAUTION : Not recommended for machining of magnesium as fine
chips of magnesium is a fire hazard whenmoistened with
water.PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002) performance
requirements.Product Data SheetTypical PropertiesCHARACTERISTICS
CUTVEL S PLUSEmulsion Stability & Frothing PassesCopper Strip
Corrosion at 100C for 3 hours 1aCast Iron Corrosion Test
0/1-1Thermal stability Test PassesFlash Point,COC,C, Min. 150pH of
5% emulsion 9.2 (Typical)Cutvel S PlusSoluble Cutting OilIS:
1115-1986 (RA 2002)These are typical figures and do not constitute
a specification. In pursuit of continuous improvement, these
figures may be changed without notice atthe sole discretion of
Nandan Petrochem Ltd.Rev.No. 01-01/04/2013 17. CHARACTERISTICS
CUTVEL N 12Kinematic Viscosity @40C,cSt 11-13Flash Point,COC,C,
Min. 150Copper strip corrosion @ 100C for 3 Hrs, Min 4Sap Value, mg
KOH/gm, Min 5PRODUCT DESCRIPTION: CUTVEL N 12 contains active and
non-active sulphur, fatty oil and chlorinated additives togive
better surface finish and longer life of cutting tools over a wide
range of operating temperatures by providing anexcellent
lubricating film which resists cutting stresses.APPLICATION: CUTVEL
N 12 is recommended for severe machining operations of gear
cutting, broaching andthreading of alloys and stainless steels,
where low viscosity oil is required.The product is NOT recommended
for use on non-ferrous metals.PERFORMANCE LEVEL: Proprietary
GradeProduct Data SheetTypical PropertiesNeat Cutting OilCUTVEL N
12Proprietary GradeThese are typical figures and do not constitute
a specification. In pursuit of continuous improvement, these
figures may be changed without notice atthe sole discretion of
Nandan Petrochem Ltd.50Rev.No. 01-01/04/2013 18. Neat Cutting
OilCUTVEL N 102IS: 3065 -1985(RA 2002) TYPE 1 GRADE IIPRODUCT
DESCRIPTION: CUTVEL N 102 is blended from highly refined base
stocks with fatty oils and chlorinatedadditives for a wide range of
machining operations with good surface finish without
discolouration of the work piece. Itminimizes the tools from
excessive wear during use.APPLICATION: CUTVEL N 102 is recommended
for multipurpose machining operations of ferrous and
non-ferrousmetals including different grinding and milling
operations.PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE
1, Grade IIProduct Data SheetTypical PropertiesCHARACTERISTICS
CUTVEL N 102Kinematic Viscosity @40C,cSt 20-24Flash Point,COC,C,
Min. 160Copper strip corrosion at 100C for 3 Hrs, Max. 1Sap Value,
mg KOH/gm 9-11These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.100Rev.No. 01-01/04/2013 19. Neat Cutting OilCUTVEL N
203IS:3065-1985 (RA 2002) TYPE 2 GRADE IIIPRODUCT DESCRIPTION:
CUTVEL N 203 contains highly refined base oils with inactive
sulphurised fatty oil. It can beused for a wide range of machining
operations with good surface finish without discolouration of the
work piece. Itminimizes the tools from excessive wear during
use.APPLICATION: CUTVEL N 203 is recommended for multipurpose
machining operations of ferrous and non-ferrousmetals where
severity of machining is not encountered.PERFORMANCE LEVEL: Meets
IS: 3065-1985 (RA 2002), TYPE 2, Grade IIIProduct Data SheetTypical
PropertiesCHARACTERISTICS CUTVEL N 203Kinematic Viscosity @40C,cSt
32-36Flash Point,COC,C, Min. 160Copper strip corrosion at 100C for
3 Hrs, Max. 1Sap Value, mg KOH/gm 9-11These are typical figures and
do not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.100Rev.No. 01-01/04/2013 20.
Neat Cutting OilCUTVEL N 15GRADE: IS: 3065-1985 (RA 2002), TYPE 3,
Grade ICHARACTERISTICS CUTVEL N 15Kinematic Viscosity @40C,cSt
15-20Flash Point,COC,C, Min. 160Copper strip corrosion @ 100C for 3
Hrs, Min. 4Sap Value, mg KOH/gm, Min 5PRODUCT DESCRIPTION: CUTVEL N
15 contains active and non-active sulphur, fatty oil and
chlorinated additives togive better surface finish and longer life
of cutting tools over a wide range of operating temperatures by
providing anexcellent lubricating film which resists cutting
stresses.APPLICATION: CUTVEL N 15 is recommended for severe
machining operations of gear cutting, broaching andthreading of
alloys and stainless steels, where moderate viscosity oil is
required.The product is NOT recommended for use on non-ferrous
metals.PERFORMANCE LEVEL: CUTVEL N 15 meets the requirement of IS:
3065-1985 (RA 2002), TYPE 3, Grade IProduct Data SheetTypical
PropertiesThese are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.50Rev.No. 01-01/04/2013 21. 100Neat Cutting OilCUTVEL
N 302IS: 3065 -1985 (RA 2002) TYPE 3 GRADE IIPRODUCT DESCRIPTION:
CUTVEL N 302 contains active and non-active sulphur, fatty oil and
chlorinated additives togive better surface finish and longer life
of cutting tools over a wide range of operating temperatures by
providingexcellent lubricating film which resists cutting
stresses.APPLICATION: CUTVEL N 302 is recommended for machining
operations of gear cutting, broaching and threading ofalloys and
stainless steels, where moderate viscosity oil is required.The
product is NOT recommended for use on non-ferrous
metals.PERFORMANCE LEVEL: Meets IS: 3065-1985 (RA 2002), TYPE 3,
Grade IIProduct Data SheetTypical PropertiesCHARACTERISTICS CUTVEL
N 302Kinematic Viscosity @40C,cSt 34-40Flash Point,COC,C, Min.
160Copper strip corrosion at 100C for 3 Hrs, Min. 4Sap Value, mg
KOH/gm, Min 10These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.Rev.No. 01-01/04/2013 22. These are typical figures
and do not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.CHARACTERISTICS EDMVEL 2Colour,
ASTM, Max. 1.0Kinematic Viscosity at 40C, cSt 2.0-3.0Flash Point,
COC, C, Min. 90Copper Strip Corrosion for 3 Hrs. at 100C. 1PRODUCT
DESCRIPTION: EDMVEL 2 is highly refined oil, recommended for
submerged ram-type electrical dischargemachining of dies and other
complex recessed shapes. This is a low viscosity oil with high
flash point, slight odor andhas natural resistance to oxidation.
Its low level of volatility provides dependable safety and minimal
loss fromevaporation during use. The high dielectric constant
promotes an efficient energy -to-work ratio. The electric spark
isconcentrated between the electrode and work piece for maximum
metal removal and minimum scattering and energyloss that may lead
to overheating and premature oxidation. As a result EDMVEL 2
provides extended service life withminimum power
consumption.APPLICATION: In all electrical discharge machines
working by penetration especially for roughing, finishing and
superfinishing work where a high removal rate is required For
submerged ram-type electrical discharge machining of dies andother
complex recessed shapes. The requirements for insulation and
controlled dielectric discharge during electricdischarge machining
operations.BENEFITS: Highly refined, bright and light colored low
viscosity product with low odour Good heat transfer with high
oxidation resistance to degradation for extended product life Quick
chip removal properties for efficient EDM operation and better
surface finish. Relating high flash point ensures no generation of
fume and safety from fire hazards Optimum setting action and
excellent filterability through cartridge eliminates clogging of
fine orifices and valves. High wetability ensures liquid /metal
contact with low electrode wear and uniform insulation
Non-corrosive and requires least topping up quantity Low skin
sensitivity in normal use for non-toxicity of the
product.PERFORMANCE LEVEL: proprietary gradeProduct Data
SheetTypical PropertiesSpark Errossion OilEDMVEL 2Grade: Proprietry
Grade50Rev.No. 01-01/04/2013 23. 100Honing OilHONEVEL7,
10PROPERIOTORY GRADEPRODUCT DESCRIPTION: HONEVEL grades are
inactive type low viscosity honing oils based on mineral oils
fortifiedwith specially selected additives to impart good lubricity
characteristics and low temperature fluidity for honing andlapping
operations of all ferrous and non-ferrous metals with good surface
finish. These products have very light colourfor better visibility
of work-pieces and tools to the operators, excellent chip flushing,
good heat carrying capacity andprovide long service life to the
honing stone.APPLICATIONS: HONEVEL grades are recommended for
machining operations, like honing, lapping, turning,
drilling,tapping etc. of all ferrous and non-ferrous metals and
their alloys except Titanium alloys, for super finishing of
work-pieces.PERFORMANCE LEVEL: Proprietary GradeProduct Data
SheetTypical PropertiesCHARACTERISTICS HONEVEL 7 HONEVEL
10Kinematic Viscosity @40C,cSt 4-6 9-10Flash Point,COC,C, Min. 130
150Copper strip corrosion @ 100C for 3 Hrs, Max. 1 1Pour Point, C,
Max. (-)9 (-)9These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.Rev.No. 01-01/04/2013 24. Synthetic Grinding
FluidSYNTHVEL WSPIS:11186-1985 ( RA 2002 )2, 5, 12PRODUCT
DESCRIPTION: SYNTHVEL WSP grades are water based synthetic grinding
fluid supplied in concentratedform and are to be diluted with water
in suitable ratios before use. These grinding fluids are free from
mineral oil, fattymatter and nitrite. These grinding fluids are
economical with excellent cooling and anti - rust properties when
applied ingrinding and other high speed machining operations of
iron and steel with longer service life to grinding wheels and
goodsurface finish. The solution maintains the clarity throughout
the service period and is not attacked by bacteria. The oilremoves
grinding debris quickly and keeps the wheel exceptionally
clean.APPLICATION: SYNTHVEL WSP grades are recommended for grinding
operations of Iron, Steel, Non-alloyed Steels,Nickel Chromium
Steels, High Nickel and Titanium alloys. It must not be used for
grinding operations of aluminum, zinc,copper or magnesium alloys,
tin or cadmium coated parts. Dilution range for the products varies
from 1:40 min.to 1:100 max.PERFORMANCE LEVEL: Meet IS: 11186 -1985
(RA 2002)These are typical figures and do not constitute a
specification. In pursuit of continuous improvement, these figures
may be changed without notice atthe sole discretion of Nandan
Petrochem Ltd.50Product Data SheetTypical PropertiesClear liquid
withGreen FluorescenceClear liquid withGreen FluorescenceClear
liquid withGreen FluorescenceCHARACTERISTICS SYNTHVELGrades WSP 2
WSP 5 WSP 12Appearance of 10% Volume inDistilled WaterSpecific
Gravity at 15.6C 1.200 1.220 1.260pH of 2 % Fluid in Distilled
Water, Min 9.0 9.0 9.0Cast iron corrosion test in 50:1Distilled
water Passes Passes PassesRev.No. 01-01/04/2013 25. Quenching
OilQUENCHVELIS: 2664-1980(RA 2004)22, 32,68PRODUCT DESCRIPTION:
QUENCHVEL oils are blended from premium quality solvent refined
paraffinic base stockswhich have high flash and fire points, and
low volatility characteristics with specially selected additives
for heat treatmentof work piece for improved safety and long
service life of the products. These products provide proper and
controlledcooling with outstanding chemical and oxidation
stability.APPLICATION: Different quenching oils with wide range of
quenching speeds are used for different types of
quenchingoperations to cover the ranges of quenching need on wide
variety metallic parts. QUENCHVEL 22, QUENCVEL 32 andQUENCHVEL 68
are straight mineral oil type quenching oils, where as QUENCHVEL
22C, QUENCVEL 32C andQUENCHVEL 68C are compounded type quenching
oils.PERFORMANCE LEVEL: Meets IS: 2664 1980 (RA 2004)Product Data
SheetTypical PropertiesCHARACTERISTICS QUENCHVELGrades 22/22C
32/32C 68/68CKinematic Viscosity @40C, cSt. 20-24 30-34
64-72Viscosity Index, Min. 90 90 90Flash Point ,COC,C,Min. 190 200
200Pour Point, C, Max. (-)6 (-)6 (-)3These are typical figures and
do not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.50Rev.No. 01-01/04/2013 26. Rust
Preventive Oil(Solvent Based)RUSTVEL WD SProprietary Grade60, 90,
120PRODUCT DESCRIPTION: RUSTVEL WD S (SOLVENT BASED-WATER
DISPLACING TYPE) are light bodied solvent CutBack type, water
displacing rust preventive oils. They form very thin, soft and
powerful protective film on evaporation ofthe solvent present in
the rust preventive oils. RUSTVEL WD S are very good water
displacing characteristic andexcellent finger print corrosion
prevention property.APPLICATION: RUSTVEL WD S can be applied by
dipping, brushing, swabbing or spraying at ambient temperature
forthe protection of the iron sheets, metal stacks, ball and roller
bearings etc. from corrosion and rust.PERFORMANCE LEVEL:
Proprietary Grade.Product Data SheetTypical
PropertiesCHARACTERISTICS RUSTVEL WDSGrades 60 90 120Flash Point
,Abel ** /PMCC C,Min. 32** 60 70Copper Strip Corrosion Test @50C
for 3 hrs 1 1 1Film Thickness , Micron, in. 3.5 4.5 6.0Water
Displacement Properties Passes Passes PassesThese are typical
figures and do not constitute a specification. In pursuit of
continuous improvement, these figures may be changed without notice
atthe sole discretion of Nandan Petrochem Ltd.200Rev.No.
01-01/04/2013 27. PRODUCT DESCRIPTION: RUSTVEL WD M are non-solvent
type oily film forming type rust preventive oils with
differentviscosities and film thickness. RUSTVEL WD M are blended
from selected base stocks and special additives to ensureexcellent
protection of metal components against rusting for longer and
shorter duration in indoor and outdoorapplications respectively.
Because of its non-drying characteristics, the removal of RUSTVEL
WD M from the metalcomponents is easier by treating with petroleum
solvents, alkaline cleaning or vapour degreasing agents and do
notrequire any special precautions during storage, handling and
applications as they are free from any solvent.APPLICATION: RUSTVEL
WD M can be applied by immersion, brush, swab or spray for
protecting metal componentsfrom rusting.PERFORMANCE LEVEL:
Proprietary Grade.Product Data SheetTypical
PropertiesCHARACTERISTICS RUSTVEL WD MGrades 105 115 125Kinematic
Viscosity @40C, cSt. (Typical) 15 24 450Film Thickness , Micron,
Min. 2 2 25Flash Point ,COC C,Min. 130 160 230Copper Strip
Corrosion Test @100C for 3 hrs 1 1 1Rust Preventive OilRUSTVEL WD
MProprietary Grade105, 115, 125(Oil Based)These are typical figures
and do not constitute a specification. In pursuit of continuous
improvement, these figures may be changed without notice atthe sole
discretion of Nandan Petrochem Ltd.200Rev.No. 01-01/04/2013