Page 1
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 1/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 1
VCAP5-DCA Exam testing center exam code: VDCA510
Exam Blueprint Version 2.5
01 July 2013
Disclaimer:
This blueprint is intended to provide information about the objectives covered by this
exam, related resources, and recommended courses. The material contained within this
blueprint is not intended to guarantee that a passing score will be achieved on the exam. VMware
recommends that a candidate thoroughly understands the objectives indicated in this guide and utilizes the
resources and courses recommended in this guide where needed to gain that understanding.
Blueprint Author:
Jon C. Hall
Robert Cromartie
Joshua Andrews
Contributors:
Jonathan McDonald
Jeff Godfrey
Andrew Ellwood
Linus Bourque
John Krueger
Bob Slovick
Mostafa Khalil
Rawlinson Rivera
VMware Certified Advanced Professional 5 – Data Center Administration
Exam Blueprint
Page 2
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 2/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 2
Table of Contents
1. The Exam ............................................................................................................................................................. 3
1.1 Purpose of Exam ........................................................................................................................................... 3
1.2 Number of Questions.................................................................................................................................... 31.3 Passing Score ................................................................................................................................................ 3
1.4 How Objectives Relate to Questions on the Exam ....................................................................................... 3
1.5 Languages ..................................................................................................................................................... 3
1.6 Time Limit ..................................................................................................................................................... 4
1.7 Scheduling and Taking the Exam .................................................................................................................. 4
1.8 Certification Tracks ....................................................................................................................................... 4
1.9 Retake Policy ................................................................................................................................................. 4
1.10 Exam Security .............................................................................................................................................. 5
1.11 Exam Environment ...................................................................................................................................... 5
2. Intended Audience .............................................................................................................................................. 5
2.1 Intended Audience........................................................................................................................................ 5
3. Objectives covered in the VCAP5-DCA Exam ...................................................................................................... 5
3.1 Introduction .................................................................................................................................................. 5
3.2 Objectives ..................................................................................................................................................... 6
4. VCAP5-DCA Paths and Suggested Courses ....................................................................................................... 23
4.1 VCAP5-DCA Path Options ........................................................................................................................... 23
4.2 Recommended Courses .............................................................................................................................. 23
5. Additional Resources ........................................................................................................................................ 24
5.1 Mock Exam .................................................................................................................................................. 24
5.2 VCAP Community ........................................................................................................................................ 24
5.3 Building a vSphere Test Environment ......................................................................................................... 24
Page 3
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 3/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 3
1. The Exam
1.1 Purpose of Exam
The VMware Certified Advanced Professional 5 – Data Center Administration exam tests certification
candidates on their skills and abilities installing, configuring and administering large and/or more complex
virtualized environments.
1.2 Number of Questions
The VCAP5-DCA Exam consists of approximately 26 live lab activities and a short pre-exam survey consisting of
9 questions. Live lab activities consist of multiple tasks, where each task is scored. The total number of
activities provided is based on the total number of tasks. Because of this, the actual number of lab activities
may vary slightly between exams.
1.3 Passing Score
The passing score for this exam is 300. The scale is from 100-500. Scaled scores are calculated using a
mathematical formula that considers a variety of factors, including the number and type of exam questions
included in a specific version of the exam. Because this combination may vary in different versions of the
same examination, scaled scores provide a fair score for each individual based on the version of the exam
taken.
Points are awarded for the successful completion of each lab task. Most items on the exam are composed of
several tasks, and partial credit is awarded for those tasks that are completed successfully. Candidates can
choose to complete a task using different methods, as points are awarded based on successful completion,
not on the steps used to complete the task.
1.4 How Objectives Relate to Questions on the Exam
Objectives summarize what the test is designed to measure. Objectives are developed by Exam Developers
and Subject Matter Experts based on identified tasks that relate to the job of administering a VMware
vSphere® environment. Once the initial development process is complete, these objectives are verified using
an external group of individuals in the actual job role. The external survey determines the number of
questions for each objective, which relates directly to the criticality of the task in the job role.
1.5 Languages
The exam is available in English.
Page 4
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 4/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 4
1.6 Time Limit
The total time for this exam is 210 minutes. Candidates who take the VCAP5-DCA Exam in a country where
English is not a primary language will have an additional 30 minutes added to the exam time. This time
extension is automatic, no additional action is required from the candidate. For the purposes of this exam,
countries where English is considered one of the primary languages include Australia, New Zealand, Belize,
South Africa, Bermuda, the United Kingdom, Canada, the United States and Ireland. An additional 15 minutes
is provided to complete the survey questions and agreements.
The VMware Certified Advanced Professional 5 – Data Center Administration E xam is a live exam in which
candidates at a Pearson VUE testing center connect directly to VMware equipment specially configured for
their use in the exam. There is a limited amount of equipment available for these exams and to ensure a
candidate has the required equipment, the equipment is scheduled and partitioned for each VCAP5-DCA
Exam. After each exam is given, the exam is automatically scored and then equipment is made available for
the next exam. The equipment for each candidate is partitioned and made available in a limited time window
corresponding to the candidate’s scheduled exam time. As a result, candidates can only be seated not more
than 15 minutes before and 45 minutes after the scheduled time.
1.7 Scheduling and Taking the Exam
This exam is administered through Pearson VUE. For details on the rules and procedures associated with
registering for and taking the exam, which exams are available, latest certification news and more, please visit
the VMware page on Pearson VUE’s website at http://www.pearsonvue.com/vmware.
Pearson VUE’s website can also be used to locate a testing center in your area, schedule a VMware exam, and
review exam history information.
1.8 Certification Tracks
The VCAP5-DCA Exam is a core component of the VCAP5-DCA certification. The certification requires a passing
score on the exam, and the candidate must have achieved the VCP5-DCV certification as prerequisite to this
certification. There is no course requirement for this exam, though courses are available that cover the
objectives in the exam.
The VCAP5-DCA certification is a component of the VCDX5-DCV certification track.
Note: VCP5 and VCDX5 have been renamed VCP5-DCV (VMware Certified Professional 5 – Data Center
Virtualization) and VCDX5-DCV (VMware Certified Design Expert 5 – Data Center Virtualization) respectively.
1.9 Retake Policy
If a candidate fails an exam on the first attempt, he or she must wait 14 calendar days from their original
appointment time before he or she can register to retake the exam. If a candidate fails the exam twice or
more, there is a 30 calendar day period before being able to take the exam again. If a candidate passes the
exam, they cannot take the exam again until a new major revision of the product and certification is released.
Page 5
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 5/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 5
1.10 Exam Security
VMware reserves the right to refuse certifying a candidate who violates exam security policies. This includes
copying and redistribution of exam material, using any type of study material during the exam itself,
attempting to photograph exam items and taking an exam using a false identity. VUE testing centers will take
you photo and capture your digital signature upon arrival to take the exam.
1.11 Exam Environment
The exam consists of a number of tasks that are performed using actual equipment consisting of two ESXi
hosts and a vCenter Server virtual machine. A number of pre-configured virtual machines will also be present
for use with certain tasks. The lab environment is based on vSphere 5.0.
The VCAP5-DCA Exam includes troubleshooting tasks. As a result, some components may not be correctly
configured, or may not have been configured at all, which is entirely intentional. In addition, some lab tasks
are dependent on the successful completion of previous tasks. Every task can be completed successfully, and
knowledge of how the task is completed is essential to determine what component or components must be
configured or re-configured.
2. Intended Audience
2.1 Intended Audience
A candidate should have approximately two years of experience administering a VMware virtual environment.
The individual is capable of working with large and/or more complex virtualized environments. Large
environments are those that require cooperative administration among the members of a team of
administrators. Complex environments are those managed in a hierarchical manner, with different policies
applied at different levels of the hierarchy.
Candidates demonstrate technical leadership with vSphere technologies. They are capable of using
automation tools, implementing virtualized environments, and administering all vSphere enterprise
components as detailed in the exam blueprint. The successful candidate will most likely have additional
industry-recognized general IT certifications or the equivalent experience (typically 4-7 years). The VCP5-DCV
certification is a pre-requisite to this certification.
3. Objectives covered in the VCAP5-DCA Exam
3.1 Introduction
It is recommended that candidates have the knowledge and skills necessary to install, configure and
administer a vSphere 5 environment before taking the VCAP5-DCA Exam. While there is no course
Page 6
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 6/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 6
requirement for this exam, several courses are available that can help provide knowledge on objectives that
are covered by this exam. It is recommended that the candidate utilize these courses and/or other materials
where needed to provide background information on the objectives in the exam.
3.2 Objectives
Prior to taking this exam, candidates should understand each of the following objectives. Each objective is
listed below; along with related tools the candidate should have experience with, and related documentation
that contains information relevant to the objective. All objectives may also be referenced in other product
documentation not specifically highlighted below. The candidate should be familiar with all relevant product
documentation or have an equivalent skillset.
Section 1 – Implement and Manage Storage
Objective 1.1 – Implement and Manage Complex Storage Solutions
Knowledge
Identify RAID levels
Identify supported HBA types
Identify virtual disk format types
Skills and Abilities
Determine use cases for and configure VMware DirectPath I/O
Determine requirements for and configure NPIV
Determine appropriate RAID level for various Virtual Machine workloads Apply VMware storage best practices
Understand use cases for Raw Device Mapping
Configure vCenter Server storage filters
Understand and apply VMFS re-signaturing
Understand and apply LUN masking using PSA-related commands
Analyze I/O workloads to determine storage performance requirements
Identify and tag SSD devices
Administer hardware acceleration for VAAI
Configure and administer profile-based storage
Prepare storage for maintenance
Upgrade VMware storage infrastructure
Tools
vSphere Installation and Setup Guide
vSphere Storage Guide
Page 7
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 7/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 7
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client / Web Client
vscsiStats
vSphere CLI
o esxclio vifs
o vmkfstools
o esxtop/resxtop
Objective 1.2 – Manage Storage Capacity in a vSphere Environment
Knowledge
Identify storage provisioning methods
Identify available storage monitoring tools, metrics and alarms
Skills and Abilities
Apply space utilization data to manage storage resources
Provision and manage storage resources according to Virtual Machine requirements
Understand interactions between virtual storage provisioning and physical storage provisioning
Apply VMware storage best practices
Configure Datastore Alarms
Analyze Datastore Alarms and errors to determine space availability
Configure Datastore Clusters
Tools
vSphere Storage Guide
vSphere Command-Line Interface Concepts and Examples
vCenter Server and Host Management Guide
Product Documentation
vSphere Client / Web Client
vSphere CLI
o vmkfstools
o vdf/df
Objective 1.3 – Configure and Manage Complex Multipathing and PSA Plug-ins
Knowledge
Explain the Pluggable Storage Architecture (PSA) layout
Page 8
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 8/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 8
Skills and Abilities
Install and Configure PSA plug-ins
Understand different multipathing policy functionalities
Perform command line configuration of multipathing options
Change a multipath policy Configure Software iSCSI port binding
Tools
vSphere Installation and Setup Guide
vSphere Storage Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client
vSphere CLI
Section 2 – Implement and Manage Networking
Objective 2.1 – Implement and Manage Complex Virtual Networks
Knowledge
Identify common virtual switch configurations
Skills and Abilities
Configure SNMP
Determine use cases for and applying VMware DirectPath I/O
Migrate a vSS network to a Hybrid or Full vDS solution
Configure vSS and vDS settings using command line tools
Analyze command line output to identify vSS and vDS configuration details
Configure NetFlow
Determine appropriate discovery protocol
o CDP
o LLDP
Tools
vSphere Installation and Setup Guide
vSphere Networking Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
Page 9
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 9/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 9
vSphere Client
vSphere CLI
o esxcli
Objective 2.2 – Configure and Maintain VLANs, PVLANs and VLAN Settings
Knowledge
Identify types of VLANs and PVLANs
Skills and Abilities
Determine use cases for and configure VLAN Trunking
Determine use cases for and configure PVLANs
Use command line tools to troubleshoot and identify VLAN configurations
Tools
vSphere Installation and Setup Guide
vSphere Networking Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client
vSphere CLI
o esxcli
Objective 2.3 –
Deploy and Maintain Scalable Virtual Networking
Knowledge
Identify VMware NIC Teaming policies
Identify common network protocols
Skills and Abilities
Understand the NIC Teaming failover types and related physical network settings
Determine and apply Failover settings
Configure explicit failover to conform with VMware best practices Configure port groups to properly isolate network traffic
Tools
vSphere Installation and Setup Guide
Page 10
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 10/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 10
vSphere Networking Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client
vSphere CLI
o esxcli
Objective 2.4 – Administer vNetwork Distributed Switch Settings
Knowledge
Describe the relationship between vDS and the vSS
Skills and Abilities
Understand the use of command line tools to configure appropriate vDS settings on an ESXi host
Determine use cases for and apply Port Binding settings
Configure Live Port Moving
Given a set of network requirements, identify the appropriate distributed switch technology to
use
Configure and administer vSphere Network I/O Control
Use command line tools to troubleshoot and identify configuration items from an existing vDS
Tools
vSphere Installation and Setup Guide
vSphere Networking Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client
vSphere CLI
o esxcli
Section 3 – Deploy DRS Clusters and Manage Performance
Objective 3.1 – Tune and Optimize vSphere Performance
Knowledge
Identify appropriate BIOS and firmware setting requirements for optimal ESXi host performance
Identify appropriate driver revisions required for optimal ESXi host performance
Page 11
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 11/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 11
Skills and Abilities
Tune ESXi host memory configuration
Tune ESXi host networking configuration
Tune ESXi host CPU configuration
Tune ESXi host storage configuration Configure and apply advanced ESXi host attributes
Configure and apply advanced Virtual Machine attributes
Configure advanced cluster attributes
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Monitoring and Performance Guide
Product Documentation
vSphere Client / Web Client
o Performance Graphs vSphere CLI
o esxcli
o resxtop/esxtop
o vscsiStats
Objective 3.2 – Optimize Virtual Machine Resources
Knowledge
Compare and contrast virtual and physical hardware resources
Identify VMware memory management techniques
Identify VMware CPU load balancing techniques
Identify pre-requisites for Hot Add features
Skills and Abilities
Tune Virtual Machine memory configurations
Tune Virtual Machine networking configurations
Tune Virtual Machine CPU configurations
Tune Virtual Machine storage configurations
Calculate available resources
Properly size a Virtual Machine based on application workload
Modify large memory page settings
Understand appropriate use cases for CPU affinity
Configure alternate virtual machine swap locations
Page 12
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 12/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 12
Tools
vSphere Resource Management Guide
vSphere Virtual Machine Administration
Product Documentation
vscsiStats vSphere Client / Web Client
o Performance Charts
vSphere CLI
o resxtop/esxtop
Objective 3.3 – Implement and Maintain Complex DRS Solutions
Knowledge
Explain DRS / storage DRS affinity and anti-affinity rules
Identify required hardware components to support DPM Identify EVC requirements, baselines and components
Understand the DRS / storage DRS migration algorithms, the Load Imbalance Metrics, and their
impact on migration recommendations
Skills and Abilities
Properly configure BIOS and management settings to support DPM
Test DPM to verify proper configuration
Configure appropriate DPM Threshold to meet business requirements
Configure EVC using appropriate baseline
Change the EVC mode on an existing DRS cluster
Create DRS and DPM alarms
Configure applicable power management settings for ESXi hosts
Properly size virtual machines and clusters for optimal DRS efficiency
Properly apply virtual machine automation levels based upon application requirements
Create and administer ESXi host and Datastore Clusters
Administer DRS / Storage DRS
Tools
vSphere Resource Management Guide
Product Documentation
vSphere Client
o DRS / Storage DRS Resource Distribution Chart
Page 13
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 13/24
Page 14
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 14/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 14
Create a custom slot size configuration
Understand interactions between DRS and HA
Analyze vSphere environment to determine appropriate HA admission control policy
Analyze performance metrics to calculate host failure requirements
Analyze Virtual Machine workload to determine optimum slot size
Analyze HA cluster capacity to determine optimum cluster size
Tools
vSphere Availability Guide
Product Documentation
vSphere Client
Objective 4.2 – Deploy and Test VMware FT
Knowledge
Identify VMware FT hardware requirements
Identify VMware FT compatibility requirements
Skills and Abilities
Modify VM and ESXi host settings to allow for FT compatibility
Use VMware best practices to prepare a vSphere environment for FT
Configure FT logging
Prepare the infrastructure for FT compliance
Test FT failover, secondary restart, and application fault tolerance in a FT Virtual Machine
Tools
vSphere Availability Guide
Product Documentation
vSphere Client
Section 5 – Perform Operational Maintenance
Objective 5.1 –
Implement and Maintain Host Profiles
Skills and Abilities
Use Profile Editor to edit and/or disable policies
Create sub-profiles
Use Host Profiles to deploy vDS
Page 15
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 15/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 15
Use Host Profiles to deploy vStorage policies
Manage Answer Files
Tools
vSphere Host Profiles Guide Product Documentation
vSphere Client
Objective 5.2 – Deploy and Manage Complex Update Manager Environments
Knowledge
Identify firewall access rules for Update Manager
Skills and Abilities
Install and configure Update Manager Download Service
Configure a shared repository
Configure smart rebooting
Manually download updates to a repository
Perform orchestrated vSphere upgrades
Create and modify baseline groups
Troubleshoot Update Manager problem areas and issues
Generate database reports using MS Excel or MS SQL
Upgrade vApps using Update Manager
Utilize Update Manager PowerCLI to export baselines for testing Utilize the Update Manager Utility to reconfigure vUM settings
Tools
Installing and Administrating VMware vCenter Update Manager
Reconfiguring VMware vSphere Update Manager
Product Documentation
Update Manager PowerCLI
vSphere Client
vmware-umds
Page 16
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 16/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 16
Section 6 – Perform Advanced Troubleshooting
Objective 6.1 – Configure, Manage, and Analyze vSphere Log Files
Knowledge
Identify vCenter Server log file names and locations
Identify ESXi log files names and locations
Identify tools used to view vSphere log files
Skills and Abilities
Generate vCenter Server and ESXi log bundles
Use esxcli system syslog to configure centralized logging on ESXi hosts
Test centralized logging configuration
Analyze log entries to obtain configuration information
Analyze log entries to identify and resolve issues Install and configure VMware syslog Collector and ESXi Dump Collector
Tools
vSphere Management Assistant Guide
vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Client
VMware syslog Collector
ESXi Dump Collector
esxcli
Objective 6.2 – Troubleshoot CPU and Memory Performance
Knowledge
Identify resxtop/esxtop metrics related to memory and CPU
Identify vCenter Server Performance Chart metrics related to memory and CPU
Skills and Abilities
Troubleshoot ESXi host and Virtual Machine CPU performance issues using appropriate metrics
Troubleshoot ESXi host and Virtual Machine memory performance issues using appropriate
metrics
Use Hot-Add functionality to resolve identified Virtual Machine CPU and memory performance
issues
Page 17
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 17/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 17
Tools
vSphere Resource Management Guide
Product Documentation
vSphere Client / Web Client
vSphere CLIo resxtop/esxtop
Objective 6.3 – Troubleshoot Network Performance and Connectivity
Knowledge
Identify vCLI commands and tools used to troubleshoot vSphere networking configurations
Identify logs used to troubleshoot network issues
Skills and Abilities
Utilize net-dvs to troubleshoot vNetwork Distributed Switch configurations
Utilize vSphere CLI commands to troubleshoot ESXi network configurations
Troubleshoot Private VLANs
Troubleshoot vmkernel related network configuration issues
Troubleshoot DNS and routing related issues
Use esxtop/resxtop to identify network performance problems
Analyze troubleshooting data to determine if the root cause for a given network problem
originates in the physical infrastructure or vSphere environment
Configure and administer Port Mirroring
Utilize Direct Console User Interface (DCUI) and ESXi Shell to troubleshoot, configure, and monitor
ESXi networking
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup
vSphere Resource Management Guide
Product Documentation
vSphere Client
vSphere CLI
o esxcli
o net-dvs
o resxtop/esxtop
Page 18
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 18/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 18
Objective 6.4 – Troubleshoot Storage Performance and Connectivity
Knowledge
Identify logs used to troubleshoot storage issues
Describe the attributes of the VMFS-5 file system
Skills and Abilities
Use esxcli to troubleshoot multipathing and PSA-related issues
Use esxcli to troubleshoot VMkernel storage module configurations
Use esxcli to troubleshoot iSCSI related issues
Troubleshoot NFS mounting and permission issues
Use esxtop/resxtop and vscsiStats to identify storage performance issues
Configure and troubleshoot VMFS datastores using vmkfstools
Troubleshoot snapshot and re-signaturing issues
Analyze log files to identify storage and multipathing problems
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup
vSphere Resource Management Guide
vSphere Troubleshooting Guide
Product Documentation
vSphere Client
vSphere CLI
o esxcli
o resxtop/esxtop
o vscsiStats
o vmkfstools
Objective 6.5 – Troubleshoot vCenter Server and ESXi Host Management
Knowledge
Identify CLI commands and tools used to troubleshoot management issues
Skills and Abilities
Troubleshoot vCenter Server service and database connection issues
Troubleshoot the ESXi firewall
Troubleshoot ESXi host management and connectivity issues
Page 19
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 19/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 19
Determine the root cause of a vSphere management or connectivity issue
Utilize Direct Console User Interface (DCUI) and ESXi Shell to troubleshoot, configure, and monitor
an environment
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup Guide
vSphere Troubleshooting Guide
Product Documentation
vSphere Client
vSphere CLI
ESXi Shell
esxcli
DCUI
Section 7 – Secure a vSphere Environment
Objective 7.1 – Secure ESXi Hosts
Knowledge
Identify configuration files related to network security
Identify virtual switch security characteristics
Skills and Abilities
Add/Edit Remove users/groups on an ESXi host
Customize SSH settings for increased security
Enable/Disable certificate checking
Generate ESXi host certificates
Enable ESXi lockdown mode
Replace default certificate with CA-signed certificate
Configure SSL timeouts
Configure vSphere Authentication Proxy
Enable strong passwords and configure password policies
Identify methods for hardening virtual machines
Analyze logs for security-related messages Manage Active Directory integration
Tools
vSphere Command-Line Interface Concepts and Examples
Page 20
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 20/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 20
vSphere Installation and Setup Guide
vSphere Troubleshooting Guide
Product Documentation
vSphere Client
vSphere CLI
o esxclio vifs
Objective 7.2 – Configure and Maintain the ESXi Firewall
Knowledge
Identify esxcli firewall configuration commands
Explain the three firewall security levels
Skills and Abilities
Enable/Disable pre-configured services
Configure service behavior automation
Open/Close ports in the firewall
Create a custom service
Set firewall security level
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup Guide
vSphere Troubleshooting Guide
Product Documentation
vSphere Client
vSphere CLI
o esxcli
Section 8 – Perform Scripting and Automation
Objective 8.1 – Execute VMware Cmdlets and Customize Scripts Using PowerCLI
Knowledge
Identify vSphere PowerCLI requirements
Identify Cmdlet concepts
Identify environment variables usage
Page 21
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 21/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 21
Skills and Abilities
Install and configure vSphere PowerCLI
Install and configure Update Manager PowerShell Library
Use basic and advanced Cmdlets to manage VMs and ESXi Hosts
Use Web Service Access Cmdlets Use Datastore and Inventory Providers
Given a sample script, modify the script to perform a given action
Tools
vSphere PowerCLI User's Guide
VMware vSphere Update Manager PowerCLI Installation and Administration Guide
Product Documentation
vSphere PowerCLI commands
vSphere PowerCLI Cmdlets
Objective 8.2 – Administer vSphere Using the vSphere Management Assistant
Knowledge
Identify vMA prerequisites
Identify vMA specific commands
Determine when vMA is needed
Skills and Abilities
Install and configure vMA
Add/Remove target servers
Perform updates to the vMA
Use vmkfstools to manage VMFS datastores
Use vmware-cmd to manage VMs
Use esxcli to manage ESXi Host configurations
Troubleshoot common vMA errors and conditions
Tools
vSphere Management Assistant Guide vSphere Command-Line Interface Concepts and Examples
Product Documentation
vSphere Management Appliance
vifp
vSphere CLI
Page 22
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 22/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 22
o vmkfstools
o esxcli
o vmware-cmd
Section 9 – Perform Advanced vSphere Installations and Configurations
Objective 9.1 – Install ESXi hosts with custom settings
Knowledge
Identify custom installation options
Identify ESXi Image Builder requirements
Skills and Abilities
Create/Edit Image Profiles
Install/uninstall custom drivers
Configure advanced boot loader options
Configure kernel options
Given a scenario, determine when to customize a configuration
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup Guide
Product Documentation
vSphere CLIo esxcli
Objective 9.2 – Install ESXi Hosts Using Auto Deploy
Knowledge
Identify Auto Deploy requirements
Skills and Abilities
Install the Auto Deploy Server
Utilize Auto Deploy cmdlets to deploy ESXi hosts
Configure Bulk Licensing
Provision/Re-provision ESXi hosts using Auto Deploy
Configure an Auto Deploy reference host
Page 23
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 23/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified
logo is restricted to individuals who have achieved the respective certification. 23
Tools
vSphere Command-Line Interface Concepts and Examples
vSphere Installation and Setup Guide
Product Documentation
4. VCAP5-DCA Paths and Suggested Courses
4.1 VCAP5-DCA Path Options
4.2 Recommended Courses
vSphere: Optimize and Scale
This course, for experienced VMware vSphere® personnel, teaches advanced skills for configuring and
maintaining a highly available and scalable virtual infrastructure. The course includes focus on
advanced storage and networking configuration, advanced cluster configuration, performance
troubleshooting and optimization and the use of advanced management tools. The course is based on
VMware ESXi™ 5.0 and VMware vCenter Server™ 5.0.
Configure and manage ESXi networking and storage for a large and sophisticated enterprise.
Manage changes to the vSphere environment.
Optimize the performance of all vSphere components.
Troubleshoot operational faults and identify their root causes.
Use VMware vSphere® ESXi™ Shell and VMware vSphere® Management Assistant (vMA) to
manage vSphere.
Use VMware vSphere® Auto Deploy™ to provision ESXi hosts.
Page 24
8/13/2019 VCAP5 DCA Exam Blueprint v2 5
http://slidepdf.com/reader/full/vcap5-dca-exam-blueprint-v2-5 24/24
Copyright ©2013 VMware, Inc. All rights reserved. Use of any VMware Certified 24
This course provides training on the majority of objectives covered in the VCAP5-DCA Exam and is
recommended for candidates that wish to gain additional insight into one or more of the objective
areas covered in the exam.
5. Additional Resources
5.1 Mock Exam
VMware will provide a mock exam for the VCAP5-DCA Exam. The mock exam simulates a sample question and
lab activity similar to the type of questions and activities found on the exam.
The mock exam, when available, will be located at: http://www.vmware.com/go/vcap
5.2 VCAP Community
VMware provides an online community for VCAP5-DCA candidates. This community contains valuable
information from other candidates and senior VCAPs, and is moderated by VMware certification staff.
The community is located at: http://communities.vmware.com/community/vmtn/certedu/certification/vcap
5.3 Building a vSphere Test Environment
All VMware products, including vSphere 5, can be downloaded and evaluated for 60 days. If you have the
equipment to install a copy of ESXi5.x, you can install ESXi in a VM. This would allow you to install multiple
copies of ESXi and a copy of vCenter Server. For shared storage, obtain a virtual appliance that contains an
iSCSI target. Several of these are available on the appliance marketplace.