Contact Info T: 626-454-8300 F: 626-454-8399 LALighting.com Headquaters 10141 Olney Street El Monte, CA 91731 Made in the USA Revised 04/22/21 ORDERING INFO SYSTEM DATA driver options SENSOR OPTIONS CIT400 series 2ft, 4ft led FULLY ENCLOSED GASKETED IMPACT RESISTANT LUMINAIRE SURFACE/SUSPENSION mounted led luminaire • Refrigeration, Freezer, Dusty Areas • 0-10V Dimming driver standard • Suitable for damp locations • Supports California Title 24 compliance • High (HT) ambient temperature • Wet location • Lenses • Controls • Tamper proof screws / watertight hub • NSF • Cord & plug • Emergency battery pack • Tunable white (2700K - 6500K) • Customization available upon request VAPOR TIGHT JOB Type DATE INTERACTIVE BUTTONS PHOTOMETRIC DATA APPLICATIONS FEATURES OPTIons construction • IP65 / IP66 / IP67 / NEMA 4x rated enclosure • 22 ga cold rolled steel internal snap-on gear tray/cover • Fiberglass housing with poured in place polyurethane gasket • Stainless steel latches and mounting tabs • Lens secured to fiberglass housing by stainless steel latches finish • Gear tray - baked white polyester finish / minimum reflectance 86% optical • Impact resistant smooth acrylic frosted lens electrical • High efficiency drivers coupled with long-life LEDs • Service life tested at 50,000 hours (L70) • Universal voltage 120V~277V (347V/480V available) • Power Factor (PF) ≥ 0.9 • Total Harmonic Distortion (THD) ≤ 20% listing • UL USA and Canada listed • Suitable for damp locations WARRANTY • 5-year limited warranty • 10-year limited warranty available SPECIFICATIONS lalighting.com 626-454-8300
9
Embed
VAPOR TIGHT ORDERING INFO SYSTEM DATA driver options ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA
Revised 04/22/21
ORDERING INFO SYSTEM DATA driver options SENSOR OPTIONS
CIT400 series 2ft, 4ftled FULLY ENCLOSED GASKETED IMPACT RESISTANT LUMINAIRE
S U R FA C E / S U S P E N S I O N m o u n t e d l e d l u m i n a i r e
• Refrigeration, Freezer, Dusty Areas
• 0-10V Dimming driver standard• Suitable for damp locations• Supports California Title 24 compliance
• High (HT) ambient temperature• Wet location• Lenses• Controls• Tamper proof screws / watertight hub• NSF• Cord & plug• Emergency battery pack• Tunable white (2700K - 6500K)• Customization available upon request
VAPOR TIGHT JOB
Type
DATE
INTERACTIVE BUTTONS
PHOTOMETRIC DATA
APPLICATIONS
FEATURES
OPTIons
c o n s t r u c t i o n• IP65 / IP66 / IP67 / NEMA 4x rated enclosure• 22 ga cold rolled steel internal snap-on gear tray/cover• Fiberglass housing with poured in place polyurethane gasket• Stainless steel latches and mounting tabs• Lens secured to fiberglass housing by stainless steel latches
f i n i s h• Gear tray - baked white polyester finish / minimum reflectance 86%
o p t i c a l• Impact resistant smooth acrylic frosted lens
e l e c t r i c a l• High efficiency drivers coupled with long-life LEDs• Service life tested at 50,000 hours (L70)• Universal voltage 120V~277V (347V/480V available)• Power Factor (PF) ≥ 0.9• Total Harmonic Distortion (THD) ≤ 20%
l i s t i n g• UL USA and Canada listed• Suitable for damp locations
WA R R A N T Y• 5-year limited warranty• 10-year limited warranty available
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA
Revised 04/22/21
SYSTEM DATAled FULLY ENCLOSED GASKETED IMPACT RESISTANT LUMINAIRE
B A C K T O T O PT h e s e a r e t h e m o s t p o p u l a r l u m e n pa c k a g e s. P l e a s e c o n s u lt fa c t o ry f o r a d d i t i o n a l sys t e m d ata .
2' - LED LUMEN PACKAGE
NORMAL AMBIENT TEMPERATURE(HIGH EFFICACY) PRODUCT CODE
NOTE: System data is based on 120V input voltage. Actual performance may differ as a result of end-user environment and application.This fixture has been tested and listed in accordance with UL Standards. L.A. Lighting certifies that it will operate safely when installed properly, and within an ambient temperature range noted in the system data table.Additional lumen packages and color temperatures available.
• Field adjustable dimming sensor capabilities: »Step-dims (HIGH/LOW output) »Auto Dim Control (dim to desired foot-candles, ON/OFF with motion) »Auto Night Light (dim to desired foot-candles, LOW without motion)
• Holds lights OFF when sufficient daylight is present regardless of motion detection
• Adjustable ramp up & fade down time• Remote setup & adjustment via the iOS® or Android® sensor
• Field adjustable dimming sensor capabilities: »Step-dims (HIGH/LOW output) »Auto Dim Control (dim to desired foot-candles, ON/OFF with motion) »Auto Night Light (dim to desired foot-candles, LOW without motion)
• Holds lights OFF when sufficient daylight is present regardless of motion detection
• Adjustable ramp up & fade down time• Remote setup & adjustment via handheld wireless tool sold separately
P/N: REMOTE(Mfg. Name)
PCSE(W)(Lens Option) - Photocell1
• Holds lights OFF when sufficient daylight is present regardless of motion detection
PCS / SH - Photocell Sensor with Light Shield Dome1
• Turns light ON/OFF based on light levels• Comes with Light Shield Dome
LENS OPTION COVERAGE
(LW) Extra Wide 6x Height
(H) High Bay 3x Height
(L) Standard 2x Height
(A) Aisle Way 3x Height
(Blank) No Specified Lens Option
MS
MS - Turns light ON/OFF based on motion detectionMSPC - Holds light OFF when sufficient daylight is present regardless of motionMSSD - Step-dims output with motion detectionMSPCD - Automatically dims output through preset photocell, ON/OFF with motion detectionPCS - PhotocellPCSD - Photocell with step-dimming
(LW)
(Blank) - Leave blank for damp listedW - Wet Listed
W
Mounting Heights
1 - 8-45ft2 - 8-40ft
Lens Options
*Not all sensor configurations allow for alternative lens configuration. Please consult factory for additional information.
(Blank) - Leave blank for default mounting positionE - End mounted sensor location
E
*Not all sensor configurations allow for apply to all fixtures. Please consult factory for additional information.
WLC(LEDRU) - EnOcean® LED Relay Zone Controller• Supports a single LED fixture or multiple daisy chained LED fixtures• Module installed inside lighting fixture
ESRPU-W-EO - EnOcean® Rocker Switch – Single – Surface Mount• Wireless single rocker switch with mounting plate• No batteries needed
EDRPU-W-EO - EnOcean® Rocker Switch – Double – Surface Mount• Wireless double rocker switch with mounting plate• No batteries needed
S3054-N300 - EnOcean® Navigan NWC 300U – Commissioning Tool• Navigan Wireless Commissioner is used to configure EnOcean
controllers & sensors• It can be used to define link tables, change parameters/settings, & to
edit & store projects• Configuration settings can be saved & cloned to enable quick
configuration• Connectivity is through the NWC 300U USB Stick
EOSWU-W-EO - EnOcean® Occupancy Sensor – Wall Mount• Wireless wall mounted occupancy sensor• Solar powered - no batteries needed (coin battery operated in low light
conditions)• PIR motion sensor with both wide angle (50ft) and long range (100ft)
options• Mounting height: 6-8ft
EOSCU-W-EO - EnOcean® Occupancy Sensor – Ceiling Mount• Wireless ceiling mounted occupancy sensor• Solar powered - no batteries needed (coin battery operated in low light
conditions)• PIR motion sensor with 360° viewing angle lens (34’ diameter)• Mounting height: 7-10ft
ELLSU-W-EO - EnOcean® Light Level Sensor – Ceiling Mount• Light Level sensor that measures and reports the level of available
natural light • Solar powered - no batteries needed (coin battery operated in low light
conditions)• Enables implementation of daylight harvesting control systems• Mounting position: At the ceiling, close to ambient light source
Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA
Revised 04/22/21
led FULLY ENCLOSED GASKETED IMPACT RESISTANT LUMINAIRE lalighting.com 626-454-8300
YTCS10• Y-toggle-end / Cable Suspension System
Note:• All CIT400 series products come with four stainless steel mounting
tabs, two on each side of fixture housing. Tabs can be used with V-hook, ceiling mount hanger, cable, or chain.
CIT4/CS10• Cable suspension system• Cable suspension system works in conjunction with stainless steel V-hooks (CIT4/VH)• (2x) CIT4/VH included with cable suspension systems per set• Two (2) cable suspension systems per set
Self-Locking Device• Secures free end to ceiling member
CIT4/VH• Stainless steel V-hook
10ft Cable Standard• One end free and the other end secured
within the fixture• 100lbs work load• 500lbs break load
Self-Locking Device• Secures free end to ceiling member
10ft Cable Standard• One end free and the other end secured within the fixture• 100lbs work load• 500lbs break load
Mounting Tabs• Mounting tabs through passing-holes
and anchored in the fixture housing
CIT4/VH• Corrosion resistant stainless steel V-Hooks for chain mount applications• Two (2) hooks per set• Hooks work in conjunction with stainless steel mounting brackets (CIT4/CS10) or chain by others
mounting accessories B A C K T O T O P
CIT4/CM• Corrosion resistant stainless steel V-Hooks for ceiling mount applications• Two (2) hooks per set
CIT400-12-4L-DFRA-DRDM-UNV-2/840TEST NO. = LA-T3205-1LED TYPE = 48 LED MODULENO. OF MODULE = 4SYSTEM WATT (W) = 102.2CRI ≥ 80L70(Hrs.) ≥ 50,000PHOTOMETRY TYPE = C