Vanguard Administrator 5.2 Message Ref Guide - jmit.com€¦ · Vanguard Administrator Messages Reference Guide iii ... Vanguard Connect Manager Messages ... UFMM004E Unable to create

Vanguard Administrator

z/OS (OS/390) Security Server Automated Administration

Message Reference Guide

Version 5.2

Vanguard Administrator™ Version 5.2 Document Number VRAR-072704-521M July, 2004

Copyright © 1989-2004 Vanguard Integrity Professionals All rights reserved. Printed in the USA. No part of this publication may be copied, reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, for any purpose other than the Licensee's personal use, without express written permission from Vanguard Integrity Professionals-Nevada.

Trademarks Vanguard, Vanguard Integrity Professionals, Vanguard Security Solutions, Vanguard Security Suite, Vanguard Security on Demand, Security on Demand, ez/Security on Demand, RioVision, Vanguard Administrator, Administrator, Vanguard Advisor, Advisor, Vanguard Analyzer, Analyzer, Vanguard Enforcer, Enforcer, Vanguard SecurityCenter, SecurityCenter, Vanguard INCompliance, INCompliance, Vanguard PasswordReset, PasswordReset, Vanguard ez/AccessControl, ez/AccessControl, Vanguard ez/Signon, ez/Signon, Vanguard ez/Integrator, ez/Integrator, Vanguard ez/Signon Deploy, ez/Signon Deploy, Vanguard Identity Manager, Quality Security Framework, Quality Security/390 Suite, QS/390, SmartPanel, SmartLink, Find-it-Fix-it-Fast, RiskMinder, SmartAssist, eDistribution, AutoPilot, QuickGen, Pathway to Profitability, Enterprise-Wise and Knowledge Expo are trademarks or service marks of Vanguard Integrity Professionals-Nevada. z/OS, OS/390, Security Server, RACF, DB2, CICS, IMS, JES and MVS/ESA are registered trademarks of International Business Machines Corporation. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. All other products mentioned in this publication are trademarks of their respective companies.

About This Product Any software products accompanying this publication are copyrighted and owned by Vanguard Integrity Professionals-Nevada. Use of the software product is governed by the provisions of your License Agreement or the Terms of Use on the envelope in which the software product was sent to you. Warranty and Limitation of Liability: VANGUARD warrants that the licensed software products as delivered do not infringe any patent or copyright held by any third party and enforceable under U.S. law. THE FOREGOING WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY VANGUARD UNDER OR IN CONNECTION WITH THE LICENSED SOFTWARE PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NONINFRINGEMENT. UNDER NO CIRCUMSTANCES WILL VANGUARD BE LIABLE TO CUSTOMER FOR ANY OF THE FOLLOWING: (I) ANY DAMAGES CAUSED BY THE FAILURE OF CUSTOMER TO PERFORM ITS RESPONSIBILITIES; (II) ANY THIRD-PARTY CLAIMS AGAINST CUSTOMER FOR LOSSES OR DAMAGES; OR (III) ANY LOST PROFITS, LOSS OF BUSINESS, LOST SAVINGS OR OTHER CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT, EXEMPLARY OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THEIR POSSIBILITY.

T a b l e o f C o n t e n t s

V a n g u a r d A d m i n i s t r a t o r M e s s a g e s R e f e r e n c e G u i d e iii

Table of Contents

Customer Support.......................................................................................................v How to Contact Us................................................................................................................v Join Vanguard-L ...................................................................................................................v Submit Vanguard Forms ......................................................................................................vi How to Send Your Comments .............................................................................................vi

About This Manual ....................................................................................................vii System Messages .......................................................................................................1 Chapter 1. Unix File Manager Messages (UFM) .......................................................3 Chapter 2. Vanguard Connect Manager Messages (VCM) ....................................33 Chapter 3. DB2 Reports Messages (VDB)...............................................................41 Chapter 4. Identity Manager ISPF Messages (VIMM) .............................................45 Chapter 5. Identity Manager TSO Messages (VIM).................................................63 Chapter 6. Distributed Identity Manager Messages (VIM) .....................................77

Identity Manager CICS Messages (VIM) ...........................................................................81 Chapter 7. Administrator Messages (VRA).............................................................85 Chapter 8. Administrator ISPF Messages (VRAM)...............................................181

VRC Messages (VRCM) ..................................................................................................245

C u s t o m e r S u p p o r t

V a n g u a r d A d m i n i s t r a t o r M e s s a g e s R e f e r e n c e G u i d e v

Customer Support Technical support is available 24 hours a day. A direct support hotline is fully staffed from 5:00 am to 5:00 pm PST, Monday through Friday. Before and after the direct support hours and on weekends, a responsive system is in place to handle your calls on a priority basis.

When you call Vanguard for assistance, please be prepared to provide your name, company name, and customer number. You can reach us at:

Vanguard Customer Support Phone: (702) 794-0014 or (877) 794-0014 Fax: (702) 794-0023 Email: [email protected]

Please call Vanguard Integrity Professionals if you have questions about Vanguard products, the Vanguard Knowledge Expo, RACF, or your local RACF User Group.

How to Contact Us Corporate Headquarters Vanguard Integrity Professionals-Nevada 3035 East Patrick Lane, Suite 11 Las Vegas, NV 89120-3478 Direct/International: (702) 794-0014 Fax: (702) 794-0023

California Vanguard Research Institute, Inc. 180 South Anita Drive, Suite 201 Orange, CA 92868-3306 Direct/International: (714) 939-0377Fax: (714) 939-0273

Note: We distribute product maintenance on the 1st and 15th of the month through our website, www.go2vanguard.com. To obtain product maintenance from our website, click the Customer Zone link on the home page. Then log in to the Customer Zone and click the Download Maintenance Files & PTFs link.

Join Vanguard-L Vanguard-L is a free interactive discussion forum we provide for our users to exchange information, ask questions, make suggestions and get advice on Vanguard products. To join Vanguard-L, visit our website, www.go2vanguard.com, and click the Vanguard-L link.

V a n g u a r d A d m i n i s t r a t o r M e s s a g e s R e f e r e n c e G u i d e

vi V a n g u a r d I n t e g r i t y P r o f e s s i o n a l s

Submit Vanguard Forms Vanguard Product Problem Support and Enhancement Request Forms are available in PDF format in the documentation folder of the CD supplied with this product. Print or photocopy these forms as needed.

You can also report a problem or request an enhancement through the Vanguard website. After you log into the Customer Zone, click the Contact Tech Support link.

Vanguard Product Problem Support Form

You may use the Vanguard Product Problem Support Form to report problems with any Vanguard product. Along with this form, fax a copy (when applicable) of the following:

• Screen print of error message(s)

• Symptom dump(s)

• Job log

• Any additional information

Vanguard Enhancement Request Form

You may use the Enhancement Request Form to help Vanguard Development identify enhancements that will make their products more beneficial to your installation. Fax or email this form along with any appropriate samples.

How to Send Your Comments Your comments about Vanguard documentation are important in helping us provide useful information about installing and using Vanguard software solutions. If you have comments about this book or any other Vanguard publication, send your comments to [email protected].

Be sure to include the document name, the document number, product version and release information, and the page number you are referring to.

A b o u t T h i s M a n u a l

V a n g u a r d A d m i n i s t r a t o r M e s s a g e s R e f e r e n c e G u i d e vii

About This Manual This manual lists and describes the messages produced by Vanguard Administrator.

Who Should Use This Manual

This manual is for end users who need clarification of Vanguard Administrator messages. The manual assumes that you are familiar with your particular operating system and login security procedures.

How This Manual Is Organized

This manual is organized in the following sections:

• DB2 Reports

• Identity Manager ISPF (VIMM)

• Identity Manager TSO (VIM)

• Distributed Identity Manager (VIM)

• Identity Manager CICS (VIM)

• Administrator (VRA)

• Administrator ISPF (VRAM)

• VRC Messages (VRCM)

S y s t e m M e s s a g e s

V a n g u a r d A d m i n i s t r a t o r M e s s a g e s R e f e r e n c e G u i d e 1

System Messages Administrator System Messages consist of error messages, warning messages and informational messages. These messages are designed to help the user correct input, solve problems, and run batch jobs efficiently. The message suffixes listed below indicate the type of message generated.

Type Application

I Information; no effect on processing.

W Warning: no effect on processing but condition should be reviewed.

E Error; processing may be terminated. Required SYS1.PARMLIB (IKJTSOxx) Table Entries

For example, system message VRA003E is an error message indicated by the E at the end of the message number.

U n i x F i l e M a n a g e r ( U F M )


Chapter 1. Unix File Manager Messages (UFM) UFMM000E "UNIX FILE MANAGER" REQUIRES AT A MINIMUM ISPF 5.1 (OS390 RELEASE

2.10). A CHECK OF YOUR SYSTEM SHOWS YOU HAVE <ISPF VERSION>. PROCESSING CANNOT CONTINUE.

Explanation Unix File Manager requires at a minimum ISPF 5.1 (OS390 release 2.10). A check of your system shows you have <ISPF version>. System Action Processing cannot continue. User Action None.

UFMM001E Parm <parm name> ‘<parm value>’ is invalid. Processing is aborted. Please correct and re-run.

Explanation Parm <parm name> <parm value> is invalid. System Action Processing is aborted. User Action Please correct and re-run.

UFMM002E The ‘file type’ for this file is "<file type>". The request has been ignored. Please contact Vanguard Technical Support for assistance.

Explanation The file type for this file is <file type>. System Action The request has been ignored. User Action Please contact Vanguard Technical Support for assistance.

UFMM003E This is a "Socket" type file and as such cannot be operated upon. The request has been ignored.

Explanation This is a Socket type file and as such cannot be operated upon. System Action The request has been ignored. User Action None.

UFMM004E Unable to create the ‘syscalls’ environment (‘syscalls("ON")’ returned r/c = <Syscalls r/c>). The processing is aborted. Please contact your ISPF administrator. One reason for this error may be a missing OMVS segment or missing UID field.

Explanation Unable to create the syscalls environment (‘syscalls("ON")’ returned r/c = <Syscalls r/c>).


4 V a n g u a r d I n t e g r i t y P r o f e s s i o n a l s

System Action The processing is aborted. User Action Please contact your ISPF administrator. One reason for this error may be a missing OMVS segment or missing UID field.

UFMM005W Unable to switch to ‘SuperUser’ mode. The command is ignored. You must have (at least) ‘READ’ access to the ‘BPX.SUPERUSER’ profile in the ‘FACILITY’ class.

Explanation Unable to switch to SuperUser mode. System Action The command is ignored. User Action You must have (at least) READ access to the BPX.SUPERUSER profile in the ‘FACILITY’ class.

UFMM006E The Command entered is invalid. The command has been ignored. Enter a ‘?’ for a list of valid commands.

Explanation The Command entered is invalid. System Action The command has been ignored. User Action Enter a ? for a list of valid commands.

UFMM007E You are no longer able to switch to ‘SuperUser’ mode. The command is ignored. You must have (at least) ‘READ’ access to the ‘BPX.SUPERUSER’ profile in the ‘FACILITY’ class.

Explanation You are no longer able to switch to SuperUser mode. System Action The command is ignored. User Action You must have (at least) READ access to the BPX.SUPERUSER profile in the FACILITY class.

UFMM008E "Unknown" file types are not supported. The command has been ignored. Please contact Vanguard Technical Support for assistance.

Explanation Unknown file types are not supported. System Action The command has been ignored. User Action Please contact Vanguard Technical Support for assistance.

UFMM009E The value entered for "<Directory Name>" is either invalid or was not found. Please enter a valid directory name.

Explanation The value entered for <Directory Name> is either invalid or was not found.



System Action None. User Action Please enter a valid directory name.

UFMM010E The <parm name> is a required field. Please enter a valid <parm value>. Explanation The <parm name> is a required field. System Action None. User Action Please enter a valid <parm value>.

UFMM011I You are not allowed to change the <Current (.) or Parent (..)> directory from this display.

Explanation You are not allowed to change the <Current (.) or Parent (..)> directory from this display. System Action None. User Action None.

UFMM012E You are not allowed to change the <Current (.) or Parent (..)> directory from this display. The changes have been ignored. Please switch to a directory display where this directory name is visible in order to make changes.

Explanation You are not allowed to change the <Current (.) or Parent (..)> directory from this display. System Action The changes have been ignored. User Action Please switch to a directory display where this directory name is visible in order to make changes.

UFMM013E You are not allowed to <Browse or Edit> the <Current (.) or Parent (..)> directory from this display. The request has been ignored. Please switch to a directory display where this directory name is visible in order to <Browse or Edit> it.

Explanation You are not allowed to <Browse or Edit> the <Current (.) or Parent (..)> directory from this display. System Action The request has been ignored. User Action Please switch to a directory display where this directory name is visible in order to <Browse or Edit> it.

UFMM014E You entered the product in ‘SuperUser’ mode and thus cannot use the ‘SU’ command to reset yourself. The request has been ignored.

Explanation



You entered the product in SuperUser mode and thus cannot use the SU command to reset yourself. The request has been ignored. System Action The request has been ignored. User Action None.

UFMM015E The shift amount ‘<shift value>’ is invalid. The request has been ignored. Please correct and re-try.

Explanation The shift amount <shift value> is invalid. System Action The request has been ignored. User Action Please correct and re-try.

UFMM016I If the "MVS Data Set File Name" includes a member name, then that data set must be a "PDS" and not a "PDSE".

Explanation If the MVS Data Set File Name includes a member name, then that data set must be a PDS and not a PDSE. System Action None. User Action None.

UFMM017I No changes were made therefore no commands were generated. Explanation No changes were made therefore no commands were generated. System Action None. User Action None.

UFMM018E Chmod never changes the permissions of <External or Symbolic links>, because, on this system, the permissions on <External or Symbolic links> are never used. The request has been ignored.

Explanation Chmod never changes the permissions of <External or Symbolic links>, because, on this system, the permissions on <External or Symbolic links> are never used. System Action The request has been ignored. User Action None.



UFMM019I There are no log messages to be displayed at this time. Explanation There are no log messages to be displayed at this time. System Action None. User Action None.

UFMM020W A condition has been detected that warrants a possible action on your part (indicated by a ‘*’ in the Msg column). Sort the display on the ‘Msg’ column (in descending sequence) and issue the ‘MSG’ line command for further information.

Explanation A condition has been detected that warrants a possible action on your part (indicated by a * in the Msg column). System Action None. User Action Sort the display on the Msg column (in descending sequence) and issue the MSG line command for further information.

UFMM021E The "<Major or Minor>" value must be <a valid numeric value>. Please enter a valid value.

Explanation The <Major or Minor> value must be <a valid numeric value>. System Action None. User Action Please enter a valid value.

UFMM022I The "<Directory Name>" directory already exists. The "Create New Directory" request has been ignored.

Explanation The <Directory Name> directory already exists. System Action The Create New Directory request has been ignored. User Action None.

UFMM023I You are not allowed to create the "<Current (.) or Parent (..)>" directory. Explanation You are not allowed to create the <Current (.) or Parent (..)> directory. System Action None. User Action None.



UFMM024E The ‘SET’ line command is only valid for a Directory. The ‘SET’ request has been ignored. Please enter the ‘SET’ line command on a directory name.

Explanation The SET line command is only valid for a Directory. System Action The SET request has been ignored. User Action Please enter the SET line command on a directory name.

UFMM025I Your ‘Default Initial Directory’ has been successfully changed. Explanation Your Default Initial Directory has been successfully changed. System Action None. User Action None.

UFMM026E The Directory is invalid. The ‘SET’ command has been ignored. Explanation The Directory is invalid. System Action The SET command has been ignored. User Action None.

UFMM027E The Line Command entered is invalid. The command has been ignored. Enter a ‘/’ for a list of valid commands.

Explanation The Line Command entered is invalid. System Action The command has been ignored. User Action Enter a / for a list of valid commands.

UFMM028E The ‘Select value’ requested is invalid. The value has been ignored. Please select a valid ‘<file create or report>’ type.

Explanation The Select value requested is invalid. System Action The value has been ignored. User Action Please select a valid <file create or report> type.



UFMM029E Trailing blanks in the filename are not supported by "<OEdit or OBrowse>". The requested action has been ignored.

Explanation Trailing blanks in the filename are not supported by <OEdit or OBrowse>. System Action The requested action has been ignored. User Action None.

UFMM030I The new <UID or GID> is the same as the original <UID or GID>. No commands were generated.

Explanation The new <UID or GID> is the same as the original <UID or GID>. System Action No commands were generated. User Action None.

UFMM031E The <Attribute name> attributes do not apply to <File type> type files. <Extended description> The request has been ignored.

Explanation The <Attribute name> attributes do not apply to <File type> type files. <Extended description> System Action The request has been ignored. User Action None.

UFMM032E The <UID or GID> must be numeric and NOT negative. The change has been ignored. Please correct.

Explanation The <UID or GID> must be numeric and NOT negative. System Action The change has been ignored. User Action Please correct.

UFMM033E A ‘LISTUSER’ of your OMVS segment had a return code of <ListUser rc>. Processing is aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation A LISTUSER of your OMVS segment had a return code of <ListUser rc>. System Action Processing is aborted. User Action Please contact your Security Server (RACF) administrator.



UFMM034E The file (or target if the file is a "Symb" link) must be a ‘regular’ file. The <Browse or Edit> has been ignored.

Explanation The file (or target) must be a regular file. System Action The <Browse or Edit> has been ignored. User Action None.

UFMM035I There is no message detail to display. Explanation There is no message detail to display. System Action None. User Action None.

UFMM036E The file must be a ‘directory’ file. The ‘CD’ command has been ignored. Explanation The file must be a directory file. System Action The CD command has been ignored. User Action None.

UFMM037E The sort sequence must be either ‘A’scending or ‘D’escending. The request has been ignored. Please enter a valid sort sequence.

Explanation The sort sequence must be either A for Ascending or D for Descending. System Action The request has been ignored. User Action Please enter a valid sort sequence.

UFMM038E The sort field name is invalid. The request has been ignored. Please enter a valid sort field name (and optionally the sort sequence).

Explanation The sort field name is invalid. System Action The request has been ignored. User Action Please enter a valid sort field name (and optionally the sort sequence).

UFMM039E <Sort parm error message> Please correct and re-try. Explanation <Sort parm error message> System Action None. User Action Please correct and re-try.



UFMM040I This is a ‘<File type>’ type file. Explanation This is a <File type> type file. System Action None. User Action None.

UFMM041E The ‘getgrnam’ command could not find a valid ‘GID’ for the requested group. The change has been ignored. Please enter a Group ID that has a valid ‘GID’.

Explanation The getgrnam command could not find a valid GID for the requested group. System Action The change has been ignored. User Action Please enter a Group ID that has a valid GID.

UFMM042E The ‘getgrgid’ command could not find a valid group for the requested ‘GID’. The change has been ignored. Please enter a ‘GID’ that has a valid Group Id.

Explanation The getgrgid command could not find a valid group for the requested GID. System Action The change has been ignored. User Action Please enter a ‘GID’ that has a valid Group Id.

UFMM043E The ‘getpwnam’ command could not find a valid ‘UID’ for the requested owner. The change has been ignored. Please enter a User ID that has a valid ‘UID’.

Explanation The getpwnam command could not find a valid UID for the requested owner. System Action The change has been ignored. User Action Please enter a User ID that has a valid UID.



UFMM044E The ‘getpwuid’ command could not find a valid user for the requested ‘UID’. The change has been ignored. Please enter a ‘UID’ that has a valid User Id.

Explanation The getpwuid command could not find a valid user for the requested UID. System Action The change has been ignored. User Action Please enter a UID that has a valid User Id.

UFMM045E The value entered for the <Attribute name> <Attribute action> setting was invalid. The change has been ignored. Please enter a valid value.

Explanation The value entered for the <Attribute name> <Attribute action> setting was invalid. System Action The change has been ignored. User Action Please enter a valid value.

UFMM046E The value entered for the <Extended Attribute> setting was invalid. The change has been ignored. Please enter a valid value.

Explanation The value entered for the <Extended Attribute> setting was invalid. System Action The change has been ignored. User Action Please enter a valid value.

UFMM047I The value for the <Owner or Group> name could not be retrieved by the "<unix 'get' command>" command.

Explanation The value for the <Owner or Group> name could not be retrieved by the <unix 'get' command> command. System Action None. User Action None.



UFMM048E The values entered for the <Owner or Group> name and the <UID or GID> do not translate to each other. The changes have been ignored. Please enter only one valid value.

Explanation The values entered for the <Owner or Group> name and the <UID or GID> do not translate to each other. System Action The changes have been ignored. User Action Please enter only one valid value.

UFMM049E The ‘<unix 'get' command>’ command did not return any data. The change has been ignored. If the problem persists, please contact your systems programmer or Vanguard Technical Support for assistance.

Explanation The <unix 'get' command> command did not return any data. System Action The change has been ignored. User Action If the problem persists, please contact your systems programmer or Vanguard Technical Support for assistance.

UFMM050E The "<Owner Name or Group Name>" cannot contain spaces. The change(s) has been ignored. Please correct.

Explanation The <Owner Name or Group Name> cannot contain spaces. System Action The change(s) has been ignored. User Action Please correct.

UFMM051I You are in "SU" mode and the file name "<file name>" contains single quotes ("‘"). The requested action cannot be performed while you are in "SU" mode and will be ignored. Either switch out of "SU" mode or use a SuperUser Id (UID = 0) to perform this request.

Explanation You are in SU mode and the file name <file name> contains quotes (‘). System Action The requested action cannot be performed while you are in SU mode and will be ignored. User Action Either switch out of SU mode or use a SuperUser Id (UID = 0) to perform this request.



UFMM052I You are in "SU" mode and the "<file name>" contains single quotes ("‘"). The requested action cannot be performed while you are in "SU" mode and will be ignored. Either switch out of "SU" mode or use a SuperUser Id (UID = 0) to perform this request.

Explanation You are in SU mode and the <file name> contains single quotes (‘). System Action The requested action cannot be performed while you are in SU mode and will be ignored. User Action Either switch out of SU mode or use a SuperUser Id (UID = 0) to perform this request.

UFMM053I The "Owner" field can only be changed by a Super User. Explanation The Owner field can only be changed by a Super User. System Action None. User Action None.

UFMM054I The "Owner" field can only be changed if you use the "SU" command to switch into "Super User" mode.

Explanation The Owner field can only be changed if you use the SU command to switch into Super User mode. System Action None. User Action None.

UFMM055W The "Facility" class profile "BPX.SAFFASTPATH" has been defined on your system. This profile "Specifies that successful security checks are not to be audited ...".

Explanation The Facility class profile BPX.SAFFASTPATH has been defined on your system. System Action This profile Specifies that successful security checks are not to be audited ... User Action None.



UFMM056W You have insufficient "permission" authority to change any of the "extended attribute" values (i.e. you do not have "Write" authority under any category - Owner, Group, or Other). Either switch into "SU" mode or use a SuperUser Id (UID = 0) to change these values.

Explanation You have insufficient permission authority to change any of the extended attribute values (i.e. you do not have Write authority under any category - Owner, Group, or Other). System Action None. User Action Either switch into SU mode or use a SuperUser Id (UID = 0) to change these values.

UFMM057I File names (or targets) that contain all three (3) of the characters blanks, quotes (‘), and double quotes ("), can not be processed by the <Browse or Edit> command. The requested operation has been ignored. You must use some other facility for this operation.

Explanation File names (or targets) that contain all three (3) of the characters blanks, quotes (‘), and double quotes ("), can not be processed by the <Browse or Edit> command. System Action The requested operation has been ignored. User Action You must use some other facility for this operation.

UFMM058E The value entered for "<Directory Title>" is not a directory. Please enter a valid directory name.

Explanation The value entered for <Directory Title> is not a directory. System Action None. User Action Please enter a valid directory name.

UFMM059W Copying from a "<FIFO or Chsp or Elnk>" type file may cause unpredictable results.

Explanation Copying from a <FIFO or Chsp or Elnk> type file may cause unpredictable results. System Action None. User Action None.



UFMM061I The "Destination" Directory/File is the same as the "Current" Directory/File. No commands will be generated.

Explanation The Destination Directory/File is the same as the Current Directory/File. System Action No commands will be generated. User Action None.

UFMM062E No fields were selected to be printed. No report can be generated. Explanation No fields were selected to be printed. System Action No report can be generated. User Action None.

UFMM063E The value entered for the <Attribute name> setting was invalid. All changes have been ignored. Please enter a valid value.

Explanation The value entered for the <Attribute name> setting was invalid. System Action All changes have been ignored. User Action Please enter a valid value.

UFMM064I The value entered for the <Attribute name> field translates to the same value as the <Attribute name> field. No change has been made.

Explanation The value entered for the <Attribute name> field translates to the same value as the <Attribute name> field. System Action No change has been made. User Action None.

UFMM065I The value entered for the <Attribute name> field translates to a different (but equivalent) value than the <Attribute name> field. The <Attribute name> field has been changed to the equivalent value.

Explanation The value entered for the <Attribute name> field translates to a different (but equivalent) value than the <Attribute name> field. System Action The <Attribute name> field has been changed to the equivalent value. User Action None.



UFMM066E The ‘getpwnam’ command could not find a valid ‘UID’ for the requested Name. No changes have been made. Please enter a User ID that has a valid ‘UID’.

Explanation The getpwnam command could not find a valid UID for the requested owner. System Action No changes have been made. User Action Please enter a User ID that has a valid UID.

UFMM067W No Access List changes have been made. The ‘Execute’ command has been ignored.

Explanation No Access List changes have been made. System Action The Execute command has been ignored. User Action None.

UFMM068I No changes were made to the Acl entry. The update request has been ignored. Explanation No changes were made to the Acl entry. System Action The update request has been ignored. User Action None.

UFMM069E For a ‘New’ entry, either the ‘Name’ or the ‘Id’ is required. Explanation For a New entry, either the Name or the Id is required. System Action None. User Action Please correct.

UFMM070W Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value is undefined. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value is undefined. System Action None. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.



UFMM071W Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value "<Shell Program value>" is invalid. Any unix commands executed (while returning an RC of 0) will fail. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value <Shell Program value> System Action Any Unix commands executed (while returning an RC of 0) will fail. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.

UFMM072W Your OMVS Segment Home Directory value is undefined. Please have your "Home Directory" value corrected.

Explanation Your OMVS Segment Home Directory value is undefined. System Action None. User Action Please have your Home Directory value corrected.

UFMM073W Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value "<Shell Program value>" was not found. Any unix commands executed (while returning an RC of 0) will fail. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value is undefined. Your OMVS Segment Shell Program value <Shell Program value> System Action Any Unix commands executed (while returning an RC of 0) will fail. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.

UFMM074W Your OMVS Segment Home Directory value "<Home Directory value>" is invalid. Your OMVS Segment Shell Program value is undefined. Any Unix commands executed will fail. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value <Home Directory value> is invalid. Your OMVS Segment Shell Program value is undefined. System Action Any Unix commands executed will fail. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.



UFMM075W Your OMVS Segment Home Directory value "<Home Directory value>" is invalid. Your OMVS Segment Shell Program value "<Shell Program value>" is invalid. Any Unix commands executed will fail. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value <Home Directory value> is invalid. Your OMVS Segment Shell Program value <Shell Program value> is invalid. System Action Any Unix commands executed will fail. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.

UFMM076W Your OMVS Segment Home Directory value "<Home Directory value>" is invalid. Any Unix commands executed will fail. Please have your "Home Directory" value corrected.

Explanation Your OMVS Segment Home Directory value <Home Directory value> is invalid. System Action Any Unix commands executed will fail. User Action Please have your Home Directory value corrected.

UFMM077W Your OMVS Segment Home Directory value "<Home Directory value>" is invalid. Your OMVS Segment Shell Program value "<Shell Program value>" was not found. Any Unix commands executed will fail. Please have your "Home Directory" value corrected. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Home Directory value <Home Directory value> is invalid. Your OMVS Segment Shell Program value <Shell Program value> was not found. System Action Any Unix commands executed will fail. User Action Please have your Home Directory value corrected. Please have your Shell Program value corrected.

UFMM078W Your OMVS Segment Shell Program value is undefined. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Shell Program value is undefined. System Action None. User Action Please have your Shell Program value corrected.

UFMM079W Your OMVS Segment Shell Program value "<Shell Program value>" is invalid. Any unix commands executed (while returning an RC of 0) will fail. Please have your "Shell Program" value corrected.

Explanation



Your OMVS Segment Shell Program value <Shell Program value> is invalid. System Action Any Unix commands executed (while returning an RC of 0) will fail. User Action Please have your Shell Program value corrected.

UFMM080W Your OMVS Segment Shell Program value "<Shell Program value>" was not found. Any unix commands executed (while returning an RC of 0) will fail. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Shell Program value <Shell Program value> was not found. System Action Any Unix commands executed (while returning an RC of 0) will fail. User Action Please have your Shell Program value corrected.

UFMM081W No OMVS Segment was found for you. Please have an OMVS Segment defined for you.

Explanation No OMVS Segment was found for you. System Action None. User Action Please have an OMVS Segment defined for you.

UFMM082E Your OMVS Segment Shell Program value is invalid. The unix command returned an RC of 0 but, in reality, it failed. Please have your "Shell Program" value corrected.

Explanation Your OMVS Segment Shell Program value is invalid. System Action The Unix command returned an RC of 0 but, in reality, it failed. User Action Please have your Shell Program value corrected.

UFMM083E Your OMVS Segment Home Directory value is invalid. The unix command failed. Please have your "Home Directory" value corrected.

Explanation Your OMVS Segment Home Directory value is invalid. System Action The Unix command failed. User Action Please have your Home Directory value corrected.

UFMM084W Unable to verify your OMVS segment information due to Installation Security (eg ‘FIELDS’ class). Unpredictable results may occur.

Explanation Unable to verify your OMVS segment information due to Installation Security (eg FIELDS class). Unpredictable results may occur.



System Action None. User Action None.

UFMM085W Unable to verify the default OMVS information due to Installation Security (eg ‘FIELDS’ class). Unpredictable results may occur.

Explanation Unable to verify the default OMVS information due to Installation Security (eg FIELDS class). Unpredictable results may occur. System Action None. User Action None.

UFMM086W Unable to verify both your OMVS segment information and the default OMVS information due to Installation Security (eg ‘FIELDS’ class). Unpredictable results may occur.

Explanation Unable to verify both your OMVS segment information and the default OMVS information due to Installation Security (eg FIELDS class). Unpredictable results may occur. System Action None. User Action None.

UFMM090E A ‘RLIST’ of the FACILITY class profile ‘BPX.DEFAULT.USER’ had a return code of <Rlist rc>. Since you do not have an OMVS segment, processing must be aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation A RLIST of the FACILITY class profile BPX.DEFAULT.USER had a return code of <Rlist rc>. System Action Since you do not have an OMVS segment, processing must be aborted. User Action Please contact your Security Server (RACF) administrator.

UFMM091E The FACILITY class profile ‘BPX.DEFAULT.USER’ is not defined on your system. Since you do not have an OMVS segment, processing must be aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation The FACILITY class profile BPX.DEFAULT.USER is not defined on your system. System Action Since you do not have an OMVS segment, processing must be aborted. User Action Please contact your Security Server (RACF) administrator.



UFMM092E There is no ‘APPLICATION DATA’ defined for the FACILITY class profile ‘BPX.DEFAULT.USER’ on your system. Since you do not have an OMVS segment, processing must be aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation There is no APPLICATION DATA defined for the FACILITY class profile BPX.DEFAULT.USER on your system. System Action Since you do not have an OMVS segment, processing must be aborted. User Action Please contact your Security Server (RACF) administrator.

UFMM093E There is no ‘Default User’ defined in the ‘APPLICATION DATA’ field for the FACILITY class profile ‘BPX.DEFAULT.USER’ on your system. Since you do not have an OMVS segment, processing must be aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation There is no Default User defined in the APPLICATION DATA field for the FACILITY class profile BPX.DEFAULT.USER on your system. System Action Since you do not have an OMVS segment, processing must be aborted. User Action Please contact your Security Server (RACF) administrator.

UFMM094E There is no ‘Default Group’ defined in the ‘APPLICATION DATA’ field for the FACILITY class profile ‘BPX.DEFAULT.USER’ on your system. Since you do not have an OMVS segment, processing must be aborted. Please contact your ‘Security Server (RACF)’ administrator.

Explanation There is no Default Group defined in the APPLICATION DATA field for the FACILITY class profile BPX.DEFAULT.USER on your system. System Action Since you do not have an OMVS segment, processing must be aborted. User Action Please contact your Security Server (RACF) administrator.

UFMM095E Only ‘Regular’ and ‘Directory’ files may be created in a directory that has ‘File default access list’ (ACL) entries defined. The request is ignored. To create the file, first remove the default File access list, add the file, and then add the ACL entries back.

Explanation Only Regular and Directory files may be created in a directory that has default File access list (ACL) entries defined. System Action The request is ignored. User Action To create the file, first remove the default File access list, add the file, and then add the ACL entries back.



UFMM096E Unable to open the requested directory. The request is ignored. Either switch into "SU" mode or use a SuperUser Id (UID = 0) to open this directory.

Explanation Unable to open the requested directory. System Action The request is ignored. User Action Either switch into SU mode or use a SuperUser Id (UID = 0) to open this directory.

UFMM097E <Type Acl> Default Acl‘s are not valid for ’Regular‘ files. The request is ignored.

Explanation <Type Acl> Default Acl’s are not valid for Regular files. System Action The request is ignored. User Action None.

UFMM098E Acl‘s are not valid on "<Type File>" type files. The request is ignored. Explanation Acl’s are not valid on <Type File> type files. System Action The request is ignored. User Action None.

UFMM100I This is a ‘<File type>’ type Acl entry. Press the PF1 (Help) key for more information.

Explanation This is a <File type> type Acl entry. Press the F1 (Help) key for more information. System Action None. User Action None.

UFMM101I This is the UID/GID that this Acl entry is controlling. Press the PF1 (Help) key for more information.

Explanation This is the UID/GID that this Acl entry is controlling. Press the F1 (Help) key for more information. System Action None. User Action None.

UFMM102I This is the RACF Id that this Acl entry is controlling. Press the PF1 (Help) key for more information.

Explanation This is the RACF Id that this Acl entry is controlling. Press the F1 (Help)



key for more information. System Action None. User Action None.

UFMM103I These are the permissions that are granted/restricted by this Acl entry. Press the PF1 (Help) key for more information.

Explanation These are the permissions that are granted/restricted by this Acl entry. Press the F1 (Help) key for more information. System Action None. User Action None.

UFMM104E A <Acl entry type> entry already exists for this id in the Acl. The request is ignored. Please correct and retry.

Explanation A <Acl entry type> entry already exists for this id in the Acl. System Action The request is ignored. User Action Please correct and retry.

UFMM105E The "Clip Board" is empty. The "Copy" command must be issued to copy Acl data to the "Clip Board" before issuing the "Paste" command. The request is ignored. Please correct and retry.

Explanation The Clip Board is empty. The Copy command must be issued to copy Acl data to the Clip Board before issuing the Paste command. System Action The request is ignored. User Action Please correct and retry.

UFMM106I The <Acl type> Acl has been copied to the Clip Board. Explanation The <Acl type> Acl has been copied to the Clip Board. System Action None. User Action None.



UFMM107E You are not allowed to process the Acl‘s on the <Current (.) or Parent (..)> directory from this display. The request has been ignored. Please switch to a directory display where this directory name is visible in order to process the Acl’s.

Explanation You are not allowed to process the Acl’s on the <Current (.) or Parent (..)> directory from this display. System Action The request has been ignored. User Action Please switch to a directory display where this directory name is visible in order to process the Acl’s.

UFMM108E The filename that you have selected contains blanks, quotes, and apostrophes and thus can not be processed. The request has been ignored.

Explanation The filename that you have selected contains blanks, quotes, and apostrophes and thus cannot be processed. System Action The request has been ignored. User Action None.

UFMM109E You have insufficient authority to modify this Acl. You must be the Owner of the file, a SuperUser, or have (at least) read access to the UNIXPRIV class profile ‘SUPERUSER.FILESYS.CHANGEPERMS’. The request has been ignored. Please correct and retry the action.

Explanation You have insufficient authority to modify this Acl. You must be the Owner of the file, a SuperUser, or have (at least) read access to the UNIXPRIV class profile SUPERUSER.FILESYS.CHANGEPERMS. System Action The request has been ignored. User Action Please correct and retry the action.

UFMM700I Commands available: ‘Execute’, ‘End’, ‘Return’, ‘Help’, and ‘Trace’. Explanation Commands available: Execute, End, Return, Help, and Trace. System Action None. User Action None.



UFMM701I Commands available: ‘End’, ‘Return’, ‘Help’, and ‘Trace’. Explanation Commands available: End, Return, Help, and Trace. System Action None. User Action None.

UFMM702I Commands available: ‘Help’. Explanation Commands available: Help. System Action None. User Action None.

UFMM800E Unknown ‘HELP’ request: <Help value>. Please correct and re-run. Explanation Unknown ‘HELP’ request: <Help value>. System Action None. User Action Please correct and re-run.

UFMM806I This field is used to enter line commands. The commands typically operate on the file specified on the particular line.

Explanation This field is used to enter line commands. The commands typically operate on the file specified on the particular line. System Action None. User Action None.

UFMM807I An asterisk (‘*’) in this field indicates one or more messages have been generated while retrieving information for the file. Entering the ‘MSG’ line command and then pressing the ENTER key will display the message(s).

Explanation An asterisk (*) in this field indicates one or more messages have been generated while retrieving information for the file. Entering the MSG line command and then pressing the ENTER key will display the message(s). System Action None. User Action None.



UFMM808I This field displays the first 30 characters of the file name. If the file name is longer than 30 characters, the first 25 characters are displayed and a suffix of ‘(...)’ is appended to the displayed name.

Explanation This field displays the first 30 characters of the file name. If the file name is longer than 30 characters, the first 25 characters are displayed and a suffix of (...) is appended to the displayed name. System Action None. User Action None.

UFMM814I This field indicates the type of the file. The field may contain one of the following values: ChSp, Dir, ExLk, FIFO, Reg, or Symb

Explanation This field indicates the type of the file. The field may contain one of the following values: ChSp, Dir, ExLk, FIFO, Reg, or Symb System Action None. User Action None.

UFMM815I This field displays the RACF User Id associated with the UID that owns the file. If there is no User Id associated with the UID, then the Owner is displayed as "-*error*".

Explanation This field displays the RACF user id associated with the UID that owns the file. If there is no user id associated with the UID, then the Owner is displayed as -*error*. System Action None. User Action None.

UFMM816I This field displays the RACF Group Id associated with the GID for this file. If there is no Group Id associated with the GID, then the Group is displayed as "-*error*".

Explanation This field displays the RACF Group id associated with the GID for this file. If there is no Group Id associated with the GID, then the Group is displayed as -*error*. System Action None. User Action None.



UFMM817I This field displays the permissions associated with the file. The first character represents the file ‘type’. The next three characters represent the Owner permissions. The next three characters represent the Group permissions. The last three characters represent the Other permissions.

Explanation This field displays the permissions associated with the file. The first character represents the file ‘type’. The next three characters represent the Owner permissions. The next three characters represent the Group permissions. The last three characters represent the Other permissions. System Action None. User Action None.

UFMM818I This six-character field displays the audit settings associated with the file. The first three characters display the owners audit settings. The second three characters display the auditors audit settings.

Explanation This six-character field displays the audit settings associated with the file. The first three characters display the owners audit settings. The second three characters display the auditors audit settings. System Action None. User Action None.

UFMM825I This field displays the size of the file in bytes. Explanation This field displays the size of the file in bytes. System Action None. User Action None.

UFMM826I This field displays the current setting of the APF extended attribute associated with the file. When this attribute is set, an executable program file behaves as if loaded from an APF-authorized library.

Explanation This field displays the current setting of the APF extended attribute associated with the file. When this attribute is set, an executable program file behaves as if loaded from an APF-authorized library. System Action None. User Action None.



UFMM827I This field displays the current setting of the Program Control extended attribute associated with the file. When this attribute is set, an executable program file behaves as if an RDEFINE had been done for the file in the PROGRAM class. When the program is brought into storage, it does not cause the environment to be marked dirty.

Explanation This field displays the current setting of the Program Control extended attribute associated with the file. When this attribute is set, an executable program file behaves as if an RDEFINE had been done for the file in the PROGRAM class. When the program is brought into storage, it does not cause the environment to be marked dirty. System Action None. User Action None.

UFMM828I This field displays the current setting of the Shared extended attribute associated with the file. When this attribute is not set, the _BPX_SHAREAS=YES and the _BPX_SHAREAS=REUSE environment variable settings are ignored. By default the attribute is set for all executable files.

Explanation This field displays the current setting of the Shared extended attribute associated with the file. When this attribute is not set, the _BPX_SHAREAS=YES and the _BPX_SHAREAS=REUSE environment variable settings are ignored. By default the attribute is set for all executable files. System Action None. User Action None.

UFMM829I This field displays the current setting of the Set-User-Id attribute associated with the file. When this attribute is set, the effective UID and the saved UID for the process running the program (file) are changed to the owning UID for the file. This change temporarily gives the process running the program (file) access to data the file owner can access.

Explanation This field displays the current setting of the Set-User-Id attribute associated with the file. When this attribute is set, the effective UID and the saved UID for the process running the program (file) are changed to the owning UID for the file. This change temporarily gives the process running the program (file) access to data the file owner can access. System Action None. User Action None.



UFMM830I This field displays the current setting of the Set-Group-Id attribute associated with the file. When this attribute is set, the effective GID and the saved GID for the process running the program (file) are changed to the GID of the file group. This change temporarily gives the process running the program (file) access to data the file group can access.

Explanation This field displays the current setting of the Set-Group-Id attribute associated with the file. When this attribute is set, the effective GID and the saved GID for the process running the program (file) are changed to the GID of the file group. This change temporarily gives the process running the program (file) access to data the file group can access. System Action None. User Action None.

UFMM833I This field displays the first 27 characters of the target of either a symbolic link or an external link. If the target file name is longer than 27 characters, the first 22 characters are displayed and a suffix of ‘(...)’ is appended to the displayed name.

Explanation This field displays the first 27 characters of the target of either a symbolic link or an external link. If the target file name is longer than 27 characters, the first 22 characters are displayed and a suffix of (...) is appended to the displayed name. System Action None. User Action None.

UFMM834I This field displays the Major and Minor device types associated with character special (device) files. The Major and Minor numbers are displayed as decimal numbers and separated by a comma (‘,’).

Explanation This field displays the Major and Minor device types associated with character special (device) files. The Major and Minor numbers are displayed as decimal numbers and separated by a comma (,). System Action None. User Action None.

UFMM835I This three-character field indicates the Access Control Lists (ACLs) associated with the file. An ‘A’ indicates an "Access" ACL. A ‘F’ indicates a "File Default" ACL. A ‘D’ indicates a "Directory Default" ACL.

Explanation This three-character field indicates the Access Control Lists (ACLs) associated with the file. A indicates an Access ACL. F indicates a File Default ACL. D indicates a Directory Default ACL. System Action None.



User Action None.

UFMM836I Access Control Lists (ACLs) can be one of three types - "Access", "File Default", or "Directory Default". Enter the "AA", "FDA", or "DDA" line command to process the requested ACL. Press the PF1 (Help) key for more information.

Explanation Access Control Lists (ACLs) can be one of three types - Access, File Default, or Directory Default. System Action None. User Action Enter the AA, FDA, or DDA line command to process the requested ACL. Press the F1 (Help) key for more information.

UFMM900E <DateCode message> Explanation <DateCode message> System Action None. User Action None.

UFMM901E The IBM Library for REXX on zSeries is NOT available. Processing cannot continue. Please correct this situation and re-run.

Explanation The IBM Library for REXX on zSeries is NOT available. If you already have the Rexx Library, then ensure that it is available in either LPA, LINKLST, or STEPLIB. If you do not have the Rexx Library or the Rexx Alternate library, then the Alternate library can be downloaded from www.go2vanguard.com Customer Zone and installed in your TSO STEPLIB concatenation. System Action Processing cannot continue. User Action Please correct this situation and re-run.

UFMM902E The UNIX File System appears to be unavailable or you do not have at least ‘read’ access to it. Processing cannot continue. Please correct this situation and re-run.

Explanation The UNIX File System appears to be unavailable or you do not have at least read access to it. System Action Processing cannot continue. User Action Please correct this situation and re-run.

V a n g u a r d C o n n e c t M a n a g e r ( V C M )


Chapter 2. Vanguard Connect Manager Messages (VCM) VCM001E NOT AUTHORIZED TO EXECUTE THE VANGUARD CONNECT MANAGER.

Explanation The VCM command can only be issued by users with READ access to VRA$.CONNECT.MANAGER in the FACILITY class. The command issuer does not have this authority. Contact your security administrator to gain the necessary authorization. System Action No processing is done.

VCM002E PARSE ERROR - IKJPARS RC = X'XXXXXXXX'. Explanation IKJPARS encountered an error parsing the command. System Action No processing is done.

VCM003E THE USERID PARAMETER IS REQUIRED. Explanation The VCM was not requested to perform any function. Only specifying the VCM command with no parameters causes this. Reissue the command with the keywords necessary to perform the functions desired. System Action No processing is done.

VCM004E THE GROUP PARAMETER IS REQUIRED. Explanation VCM had no request to perform any function. This is caused by only specifying a userid with no other keyword(s). Reissue the command with the keywords necessary to perform the functions desired. System Action No processing is done.

VCM005E THE LIST KEYWORD IS MUTUALLY EXCLUSIVE WITH ALL OTHER KEYWORDS

Explanation When the LIST keyword is specified, no other parameter is permitted except the required GROUP parameter. Reissue the command with only the GROUP and LIST keywords. System Action No processing is done.



VCM006I PROCESSING SUCCESSFUL. Explanation All processing requested was successful. System Action User connect profile updated.

VCM007E VANGUARD CONNECT MANAGER LOAD MODULE IS NOT AUTHORIZED. Explanation The VCM command load Module is not APF authorized. Contact your system support staff and report this problem. System Action No processing is done.

VCM008E RACF NOT ACTIVE. RACF REQUIRED FOR VCM COMMAND. Explanation RACF is not currently active. System Action No processing is done.

VCM009E NO USER ACEE. YOU MUST BE RACF DEFINED TO USE VANGUARD CONNECT MANAGER.

Explanation No ACEE was found for the user that issued the VCM command. This is usually caused by the user not being validated by RACF when logging on to the system. System Action No processing is done.

VCM010E USERID NOT FOUND IN THE RACF DATABASE. Explanation The userid specified on the VCM command was not found in the RACF database. Ensure that the userid is entered correctly and reissue the command. System Action No processing is done.

VCM011E GROUP NOT FOUND IN THE RACF DATABASE. Explanation The group specified on the VCM command was not found in the RACF database. Ensure that the group is entered correctly and reissue the command. System Action No processing is done.



VCM012E INVALID REVOKE/RESUME DATE, IT MUST BE IN THE FUTURE. Explanation The REVOKE or RESUME date is invalid. It must be a future date entered with the format mm/dd/yyyy. Reissue the command with a future date. System Action No processing is done.

VCM013E USER IS NOT CONNECTED TO THE SPECIFIED GROUP. Explanation Group connect information cannot be listed since the user is not connected to the specified group. System Action No processing is done.

VCM014E INVALID REQUEST - CANNOT REMOVE USER FROM DEFAULT GROUP. Explanation RACF does not allow removal of a user from his/her default group. System Action No processing is done.

VCM015E USER HAS NO CONNECT GROUPS Explanation RACF internal error. System Action No processing is done.

VCM016E REVOKE/RESUME DATE IS INVALID. MUST BE IN FORMAT MM/DD/YYYY. Explanation Enter the date in the specified format. System Action No processing is done.

VCM017E ERROR IN DATE CONVERSION. Explanation Internal error. Contact Vanguard Technical Support. System Action No processing is done.

VCM018E INVALID PROCESS SELECTION. Explanation Internal error. Contact Vanguard Technical Support. System Action No processing is done.



VCM019E CONNECT OWNER IS NOT A USER OR GROUP. Explanation The entity specified in OWNER(xxxxx) is not a valid user or group. System Action No processing is done.

VCM020E INVALID REQUEST - REVOKE/RESUME INVALID COMBINATION. Explanation An invalid combination of REVOKE and RESUME parameters was specified on the VCM command. Verify your parameters and reissue after correction. System Action No processing is done.

VCM021E RESUME IGNORED, USER IS NOT REVOKED. Explanation The Resume date cannot be processed because the user is not revoked. System Action No processing is done.

VCM022E REVOKE DATE IGNORED, USER IS ALREADY REVOKED. Explanation The Resume date cannot be processed because the user is already revoked. System Action No processing is done.

VCM023E USER CONNECTED TO LOCKOUT GROUP. Explanation The user is connected to the lockout group and cannot be processed by Vanguard Connect Manager. See parameter CMLOCKOUT(group) in member VRAOPT00 of the VIPOPTS dataset. System Action No processing is done.

VCM024E INSUFFICIENT AUTHORITY - TARGET USER HAS SPECIAL. Explanation READ access to VRACO$.NONE.SPECIAL prevents update of this user. System Action No processing is done.



VCM025E NOT AUTHORIZED TO PROCESS THIS GROUP. Explanation READ access to VRACO$.ALL or VRACO$.group is required to process this group. READ access to $VRACO.NONE.group prevents update of this group. System Action No processing is done.

VCM026E INSUFFICIENT AUTHORITY - TARGET USER HAS OPERATIONS. Explanation READ access to VRACO$.NONE.OPERATIONS prevents update of this user. System Action No processing is done.

VCM027E INSUFFICIENT AUTHORITY - TARGET USER HAS AUDITOR Explanation READ access to VRACO$.NONE.AUDITOR prevents update of this user. System Action No processing is done.

VCM028E NOT AUTHORIZED TO PROCESS THIS USER. Explanation READ access to VRACO$.NONE.userid prevents update of this user. System Action No processing is done.

VCM029E NOT AUTHORIZED FOR SPECIFIC CONNECT AUTHORITY. Explanation READ access is required to VRACOCR$.group for CREATE authority, VRACOCO$.group for CONNECT authority or VRACOJN$.group for JOIN authority. System Action No processing is done.

VCM030E NOT AUTHORIZED TO WRITE SMF RECORDS. Explanation READ access to VRAPW$.SMFAUDIT is required to write SMF records. System Action No processing is done.



VCM031E NOT AUTHORIZED FOR GROUP-SPECIAL. Explanation READ access to VRACOSP$.group is required to process this attribute. System Action No processing is done.

VCM032E NOT AUTHORIZED FOR GROUP-OPERATIONS. Explanation READ access to VRACOOP$.group is required to process this attribute. System Action No processing is done.

VCM033E NOT AUTHORIZED FOR GROUP-AUDITOR. Explanation READ access to VRACOAU$.group is required to process this attribute. System Action No processing is done.

VCM034E ERROR IN AUTHORIZATION CHECKING. INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'.

Explanation The VCM encountered an error while attempting to determine if the issuer of the command has READ access to the FACILITY class profiles. Report the return code (RC) and reason code (RSC) values to your system support staff. System Action No processing is done.

VCM035E ERROR DURING ICHEINTY. INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'.

Explanation The VCM encountered an error while attempting to obtain or update connect information for the user. Report the return code (RC) and reason code (RSC) values to your system support staff. System Action No processing is done.

VCM036E ERROR DURING RACROUTE. INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'.

Explanation The VCM encountered an error while attempting to obtain or update connect information for the user. Report the return code (RC) and reason code (RSC) values to your system support staff. System Action No processing is done.



VCM037E NO GETMAIN ADDRESS FOR LIST. Explanation Internal error - Contact Vanguard Technical Support. System Action No processing is done.

VCM099E UNKNOWN RETURN CODE RECEIVED. INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'.

Explanation The VCM received an unknown return and or reason code while processing the command. Report the return code (RC) and reason code (RSC) values to your system support staff. System Action Processing is halted.

D B 2 R e p o r t s M e s s a g e s ( V D B )


Chapter 3. DB2 Reports Messages (VDB) VDB0501 ERROR ATTACHING TO DB2 (CAF)

Explanation A Call Attach Facility error occurred while attaching to DB2. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT35

VDB0502 ERROR OPENING DB2 CURSOR Explanation An error occurred while opening a DB2 cursor. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT35

VDB0503 ERROR FETCHING FROM DB2 CURSOR Explanation An error occurred while fetching from a DB2 cursor. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT35

VDB0504 CLOSING DB2 CURSOR Explanation An error occurred while attempting to close a DB2 cursor. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT35

VDB0505 ERROR FORMATTING SQL ERROR MESSAGE, RC= Explanation A RETURN CODE other than zero was returned from DSNTIAR (DB2 message formatting routine) while performing a SELECT, INSERT, UPDATE, DELETE, or COMMIT. User Action Review the DB2 messages. Module VDBRPT35



VDB0506 INVALID EXECUTION PARM Explanation The input parameters to VDBRPT35 contain invalid data. User Action Correct the parameters in the JCL jobstream. Module VDBRPT35

VDB9901 ERROR DEFINING ISPF VARIABLE Explanation An error occurred while creating an ISPF variable. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT99

VDB9902 ERROR CREATING ISPF TABLE Explanation An error occurred while creating the VDBTDBID ISPF table. User Action Review the associated messages. Correct and retry the request. Module VDBRPT99

VDB9903 ERROR SORTING ISPF TABLE Explanation An error occurred while sorting the VDBTDBID ISPF table. User Action Review the associated messages. Correct and retry the request. Module VDBRPT99

VDB9904 ERROR ATTACHING TO DB2 (CAF) Explanation A Call Attach Facility error occurred while attaching to DB2. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT99

VDB9905 ERROR PERFORMING DB2 CALL Explanation An error occurred while performing an SQL Call. User Action Review the associated DB2 messages. Correct and retry the request. Module VDBRPT99

D B 2 R e p o r t s M e s s a g e s ( V D B )


VDB9906 ERROR PERFORMING TBADD Explanation An error occurred while adding an entry to the VDBTDBID ISPF table. User Action Review the associated messages. Correct and retry the request. Module VDBRPT99

VDB9907 ERROR CLOSING ISPF TABLE Explanation An error occurred while closing the VDBTDBID ISPF table. User Action Review the associated messages. Correct and retry the request. Module VDBRPT99

VDB9908 ERROR FORMATTING SQL ERROR MESSAGE, RC= Explanation A RETURN CODE other than zero was returned from DSNTIAR (DB2 message formatting routine) while performing a SELECT, INSERT, UPDATE, DELETE, or COMMIT. User Action Review the DB2 error messages. Module VDBRPT99

I d e n t i t y M a n a g e r I S P F M e s s a g e s ( V I M M )


Chapter 4. Identity Manager ISPF Messages (VIMM)

The first line of a message contains the ISPF short message. The short message is displayed in the upper right corner of the panel.

The second line of the message contains the ISPF long message. The long message is displayed on line 3 of the panel if the entire text string will fit. If the long message will not fit on line 3, it is displayed in an ISPF pop-up window.

Not all errors have a short message. VIMM001 PROCESS SUCCESSFUL

IDENTITY MANAGER RETURN CODE WAS 0 Explanation All processing requested was successful. System Action User profile updated.

VIMM002 RACF NOT ACTIVE RACF MUST BE ACTIVE TO PROCESS IDENTITY MANAGER REQUESTS

Explanation RACF is not currently active. System Action No processing is done.

VIMM003 NO USER ACEE USER ID NOT IDENTIFIED TO RACF AT LOGON

Explanation No ACEE was found for the user that issued the TSO VIDMAN command. The user not being validated by RACF when logging on to the system usually causes this. System Action No processing is done.

VIMM004 PASSWORDS DIFFER IDENTITY MANAGER RETURN CODE WAS 0

Explanation The password value entered with the NPWD and the VPWD keywords is not the same. System Action No processing is done. User Action Re-issue the command and ensure that the same password value is specified for both keywords.



VIMM005 INVALID REQUEST REVOKE AND RESUME CANNOT BE SPECIFIED TOGETHER

Explanation Both the REVOKE and RESUME keywords were specified. Only one is allowed per request. System Action No processing is done. User Action Re-issue the command with one keyword.

VIMM006 INVALID REQUEST INTERVAL AND NOINTERVAL CANNOT BE SPECIFIED TOGETHER

Explanation Both the INTERVAL AND NOINTERVAL keywords were specified. Only one is allowed per request. System Action o processing is done. User Action Re-issue the command with one keyword.

VIMM007 INVALID INTERVAL PASSWORD INTERVAL MUST BE A VALUE FROM 0 TO 254, INCLUSIVE

Explanation The value specified with the INTERVAL keyword is out of range. It must be between 1 and 254. System Action No processing is done. User Action Re-issue the command with a valid INTERVAL value.

VIMM008 INVALID PASSWORD THE NEW PASSWORD WAS FOUND IN THE PASSWORD HISTORY

Explanation The password specified via the NPWD keyword is not valid because it is either the same as the users current password or in the users password history. System Action No processing is done. User Action Re-issue the command with a different value for the password.



VIMM009 NOT AUTHORIZED INTERVAL OPTION REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The INTERVAL keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the INTERVAL keyword, the command issuer must have the RACF SPECIAL attribute.

VIMM010 NOT AUTHORIZED INTERVAL OF 0 REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The NOINTERVAL keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the NOINTERVAL keyword, the command issuer must have the RACF SPECIAL attribute.

VIMM011 NOT AUTHORIZED PASSWORD HISTORY COMPRESSION REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The COMPRESS keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the COMPRESS keyword, the command issuer must have the RACF SPECIAL attribute.

VIMM012 NOT AUTHORIZED YOU ARE NOT AUTHORIZED TO RESET THIS USER'S PASSWORD

Explanation Only users with either the RACF SPECIAL attribute or READ access to specific profiles in the RACF FACILITY class can issue Identity Manager. System Action No processing is done. User Action The command issuer does not have authority by either of these means. Contact your security administrator to gain the necessary authorization.



VIMM013 INTERNAL ERROR, ERROR EXTRACTING DEFAULT GROUP, (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to determine the default group of the specified user. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM014 INTERNAL ERROR, ERROR IN AUTHORIZATION CHECKING (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to determine if you have READ access to RACF FACILITY class profiles. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM015 INTERNAL ERROR, ERROR PROCESSING PASSWORD HISTORY (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to determine if the new password was equal to the current password, equal to a password in the password history, or while attempting to update the password history with the current password. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM016 INTERNAL ERROR, ERROR PROCESSING NEW PASSWORD (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to update the user’s profile with the new password. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIMM017 INTERNAL ERROR, ERROR PROCESSING REVOKE OR RESUME (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to update the user’s profile with the new password. System Action If a new password was specified then it was already processed. If either REVOKE or RESUME was specified then it was also processed. No processing is not done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM018 INTERNAL ERROR, ERROR PROCESSING INTERVAL (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to set the password interval. System Action If a new password was specified then it was already processed. Any other processing requested is not done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM019 INTERNAL ERROR, ERROR COMPRESSING PASSWORD HISTORY (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Encountered an error while attempting to compress the user's password history. System Action All processing other than compressing the users password history has already been done. The users password history is not compressed. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM020 INTERNAL ERROR UNKNOWN VRAPWD00 RETURN CODE (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager received an unknown return and or reason code while processing the request. System Action Processing is halted. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIMM022 NOTHING REQUESTED NO FUNCTIONS WERE REQUESTED

Explanation Identity Manager was not requested to perform a function. A User ID was specified, but no actions were specified. System Action No processing is done. User Action Re-issue the command with the keywords necessary to perform the functions desired.

VIMM023 CODE NOT AUTHORIZED IDENTITY MANAGER IS NOT APF AUTHORIZED

Explanation Identity Manager load Module is not APF authorized. System Action No processing is done. User Action Take the steps necessary to authorize the load Module. If you need additional assistance, call Vanguard Technical Support.

VIMM024 USER ID NOT FOUND USER ID MUST BE DEFINED TO RACF

Explanation The User ID specified was not found on the RACF database. System Action No processing is done. User Action Ensure that the User ID is entered correctly and reissue the command.

VIMM025 INTERVAL VALUE TOO LARGE INTERVAL VALUE MUST BE LESS THAN THE SETROPTS INTERVAL VALUE

Explanation The value specified on the INTERVAL keyword, while between 1 and 254, is larger than the maximum defined by your installation via the RACF SETROPTS command. System Action The request was not executed. User Action Re-issue the command with a smaller value.

VIMM026 INVALID REQUEST REVOKE AND HARD REVOKE CANNOT BE SPECIFIED TOGETHER

Explanation Both the REVOKE and HREVOKE keywords were specified. Only one is allowed per request. System Action No processing is done. User Action Re-issue the command with only one of the keywords.



VIMM027 INVALID REQUEST RESUME AND HARD REVOKE CANNOT BE SPECIFIED TOGETHER

Explanation Both the RESUME and HREVOKE keywords were specified. Only one is allowed per request. System Action No processing is done. User Action Re-issue the command with only one of the keywords.

VIMM028 NOT AUTHORIZED HARD REVOKE REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The HREVOKE keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the HREVOKE keyword, the command issuer must have the RACF SPECIAL attribute.

VIMM029 NOT AUTHORIZED RACF SPECIAL ATTRIBUTE REQUIRED TO RESUME A HARD REVOKED USER

Explanation The RESUME keyword was specified for a hard revoked user and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to RESUME a hard revoked User ID, the command issuer must have the RACF SPECIAL attribute.

VIMM030 INTERNAL ERROR, ERROR TESTING FOR HARD REVOKE (RC=X'XXXXXXXX' RSC=X'YYYYYYYY')

Explanation Identity Manager encountered an error while attempting to determine if the User ID being resumed was hard revoked. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIMM031 ENTER A USER ID AND DESIRED OPTIONS, THEN PRESS ENTER Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's COMMAND field. System Action No processing is done. User Action Enter USERID and desired options, then press enter.

VIMM032 SPECIFY THE USER ID TO PROCESS Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's User ID to Process field. System Action No processing is done. User Action None.

VIMM033 SPECIFY THE NEW PASSWORD FOR THE USER ID Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's New Password field. System Action No processing is done. User Action Enter New Password and desired options, then press enter.

VIMM034 RE-SPECIFY THE NEW PASSWORD TO VERIFY IT WAS ENTERED CORRECTLY

Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Verify Password field. System Action No processing is done. User Action Enter Verify Password and desired options, then press enter.

VIMM035 ENTER AN 'N' TO CAUSE THE USER TO BE HARD REVOKED Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Hard Revoke field. System Action No processing is done. User Action Enter a Y to do a Hard Revoke for the userid specified.

VIMM036 ENTER A 'Y' OR A DATE (MM/DD/YY) TO REVOKE THE USER Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Revoke field.



System Action No processing is done. User Action Enter a Y or MM/DD/YY to REVOKE a userid.

VIMM037 ENTER A 'Y' OR A DATE (MM/DD/YY) TO RESUME THE USER Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Resume field. System Action No processing is done. User Action Enter a Y or MM/DD/YY to RESUME a userid.

VIMM038 ENTER A NEW PASSWORD INTERVAL FOR THE USER Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's New Password Interval field. System Action No processing is done. User Action Enter the desired new password interval, and press enter.

VIMM039 ENTER A 'Y' TO COMPRESS THE USER'S PASSWORD HISTORY Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Compress Pswd History field. System Action No processing is done. User Action If compressing password history is wanted, enter Y and press Enter.

VIMM040 USER ID REQUIRED SPECIFY THE USER ID TO PROCESS

Explanation A User ID must be specified. System Action No processing done. User Action Enter the User ID to Process and any other desired fields and press ENTER.

VIMM041 PASSWORD REQUIRED NEW PASSWORD AND VERIFY PASSWORD ARE BOTH REQUIRED

Explanation Both NEW and VERIFY password must be present in order to change the password for a User ID. System Action No processing is done. User Action



Enter both the NEW and VERIFY passwords and press ENTER. VIMM042 INVALID VALUE

ENTER A 'Y' OR AN 'N' Explanation The field must contain a valid value. System Action No processing is done. User Action Enter a valid value and press the Enter key.

VIMM043 INVALID VALUE RESUME AND REVOKE CANNOT BE SPECIFIED TOGETHER

Explanation The Resume and Revoke fields are mutually exclusive. System Action No processing is done. User Action Enter only one of these two fields, if desired, and press Enter.

VIMM044 INVALID VALUE HARD REVOKE AND REVOKE CANNOT BE SPECIFIED TOGETHER

Explanation The Hard Revoke and Revoke fields are mutually exclusive. System Action No processing is done. User Action Enter only one of these two fields, if desired, and press Enter.

VIMM045 INVALID VALUE HARD REVOKE AND RESUME CANNOT BE SPECIFIED TOGETHER

Explanation The Hard Revoke and Resume fields are mutually exclusive. System Action No processing is done. User Action Enter only one of these two fields, if desired, and press Enter.

VIMM046 INVALID VALUE PASSWORD INTERVAL MUST BE IN THE RANGE OF 0 THROUGH 254

Explanation The Password Interval must be a value in the range of 0 thru 254. System Action No processing is done. User Action Enter a valid Password Interval value and press Enter.



VIMM047 LICENSE EXPIRED VIM LICENSE HAS EXPIRED - CONTACT V.I.P

Explanation The Administrator and/or the PasswordReset license have expired. Contact Vanguard Technical Support. System Action No processing is done. User Action Contact VIP.

VIMM048 USER NOT AUTHORIZED YOU ARE NOT AUTHORIZED TO USE THE IDENTITY MANAGER

Explanation You are not authorized to execute the Identity Manager. System Action No processing is done. User Action Report this condition to your system support staff.

VIMM049 INVALID NEW PASSWORD THE ICHPWX01 USER EXIT REJECTED THE NEW PASSWORD

Explanation The new password that was specified has been rejected by the ICHPWX01 exit installed at the installation. System Action The password is not changed. User Action Re-issue the request with a valid password.

VIMM050 INVALID NEW INTERVAL THE ICHPWX01 USER EXIT REJECTED THE NEW INTERVAL

Explanation The interval value specified has been rejected by the ICHPWX01 exit installed at the installation. System Action The password interval is not changed. User Action Re-issue the command with only the LIST keyword. Enter a valid Password Interval value and press Enter.

VIMM051 ENTER A 'Y' TO LIST THE USER ID Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's List User ID field. System Action No processing is done. User Action If a LIST of the USERID is desired, enter a Y and press Enter.



VIMM052 INVALID COMBINATION THE LIST FUNCTION IS MUTUALLY EXCLUSIVE WITH ALL OTHERS

Explanation The LIST function is mutually exclusive with ALL other functions. System Action No processing is done. User Action If a LIST is desired, DO NOT enter other functions.

VIMM053 INVALID DAY THE DAY (DD) PORTION OF THE DATE (MM/DD/YY) IS BLANK

Explanation The DAY portion of the DATE is blank. System Action No processing is done. User Action Enter a valid value in the DAY portion of the DATE field.

VIMM054 INVALID MONTH THE MONTH (MM) PORTION OF THE DATE (MM/DD/YY) IS BLANK

Explanation The MONTH portion of the DATE is blank. System Action No processing is done. User Action Enter a valid value in the MONTH portion of the DATE field.

VIMM055 INVALID YEAR THE YEAR (YY) PORTION OF THE DATE (MM/DD/YY) IS BLANK

Explanation The YEAR portion of the DATE is blank. System Action No processing is done. User Action Enter a valid value in the YEAR portion of the DATE field.

VIMM056 INVALID DAY THE DAY (DD) VALUE MUST BE FROM 1 TO 31, INCLUSIVE

Explanation The DAY portion of the date MUST be between 1 and 31. System Action No processing is done. User Action Enter a valid value in the DAY portion of the DATE field.



VIMM057 INVALID MONTH THE MONTH (MM) VALUE MUST BE FROM 1 TO 12, INCLUSIVE

Explanation The MONTH portion of the date MUST be between 1 and 12. System Action No processing is done. User Action Enter a valid value in the MONTH portion of the DATE field.

VIMM058 INVALID YEAR THE YEAR (YY) VALUE MUST BE TWO NUMERIC DIGITS

Explanation The YEAR portion of the date MUST be two numeric digits. System Action No processing is done. User Action Enter a valid value in the YEAR portion of the DATE field.

VIMM059 INVALID REVOKE DATE THE REVOKE DATE MUST BE IN THE FUTURE

Explanation The REVOKE date entered is not in the future. System Action No processing is done. User Action Retry with a REVOKE date in the future.

VIMM060 INVALID RESUME DATE THE RESUME DATE MUST BE IN THE FUTURE

Explanation The RESUME date entered is not in the future. System Action No processing is done. User Action Retry with a RESUME date in the future.

VIMM061 INVALID REVOKE REQUEST REVOKE WITH DATE INVALID - USER IS CURRENTLY HARD REVOKED

Explanation A user that is Hard Revoked cannot have a pending revoke set. System Action No processing is done. User Action Resume the user before attempting a pending revoke, or leave the user in Hard Revoke status.



VIMM062 INVALID RESUME REQUEST RESUME WITH DATE INVALID - USER IS CURRENTLY HARD REVOKED

Explanation A user that is Hard Revoked cannot have a pending resume set. System Action No processing is done. User Action Resume the user and set a normal revoke before attempting a pending resume, or leave the user in Hard Revoke status.

VIMM063 INTERNAL ERROR ERROR GETTING REVOKE/RESUME DATES (RC=‘NN’ RSC=‘NN’)

Explanation An internal program error occurred getting the revoke and resume dates. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM064 INTERNAL ERROR ERROR SETTING REVOKE DATE (RC=‘NN’ RSC=‘NN’)

Explanation An internal program error occurred attempting to set the revoke date. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM065 INTERNAL ERROR ERROR SETTING RESUME DATE (RC=‘NN’ RSC=‘NN’)

Explanation An internal program error occurred attempting to set the resume date. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM066 RESUME IGNORED RESUME DATE IGNORED, USER IS NOT REVOKED

Explanation A user that is not revoked cannot be resumed. System Action No processing is done. User Action None.



VIMM067 REVOKE IGNORED REVOKE DATE IGNORED, USER IS ALREADY REVOKED

Explanation A revoked user cannot have a pending revoke set. System Action No processing is done. User Action Resume the user before setting a pending revoke, or leave the user revoked.

VIMM068 INTERNAL ERROR ERROR TESTING FOR REVOKE (RC=‘NN’ RSC=‘NN’)

Explanation An internal program error occurred testing for revoke status. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM069 INTERNAL ERROR ERROR CONVERTING DATE FORMAT (RC=‘NN’ RSC=‘NN’)

Explanation An internal program error occurred attempting to convert the date format. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIMM070 INVALID REVOKE DATE THE DAY OF THE MONTH IS INVALID

Explanation The revoked date specified has an invalid day of month. System Action Request is not executed User Action Correct the date and retry the request.

VIMM071 INVALID RESUME DATE THE DAY OF THE MONTH IS INVALID

Explanation The resume date specified has an invalid day of month. System Action Request is not executed User Action Correct the date and retry the request.



VIMM072 INTERNAL ERROR ICHEINTY ERROR IN VRAPWD00 (RC=X''XXXXXXXX'', RSC=X'' XXXXXXXX'')

Explanation An internal processing error has occurred in the password administrator. System Action An error has occurred while reading or updating the RACF database. User Action Report error to security administrator. Save this information for Vanguard Technical Support.

VIMM073 ENTER THE RACF DATABASE ID WHERE THIS OPERATION SHOULD TAKE PLACE

Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's RACF Database ID field. System Action No processing is done. User Action Obtain a valid RACF database ID from your security administrator.

VIMM075 NO OUTPUT RETURNED VRAPWCL NO OUTPUT. INTERNAL ERROR, CALL VANGUARD

Explanation An internal processing error has occurred in the distributed password administrator. System Action The request is terminated. User Action Call Vanguard Technical Support.

VIMM077 INVALID NEW PASSWORD NEW PASSWORD MAY CONTAIN ALPHA, NUMERIC, #, @, OR $

Explanation The new password contains invalid characters, only alphabetic, numeric and special characters #, @, and $ are permitted. System Action No processing is done. User Action Re-enter the new password using only permitted values.

VIMM078 INVALID VERIFY PASSWORD VERIFY PASSWORD MAY CONTAIN ALPHA, NUMERIC, #, @, OR $

Explanation The verify password contains invalid characters, only alphabetic, numeric and special characters #, @, and $ are permitted. System Action No processing is done. User Action Re-enter the new password using only permitted values.



VIMM079 ENTER A 'Y' TO DEREGISTER THE USER FROM PASSWORDRESET Explanation This message is displayed when a question mark (?) is entered in the ISPF panel PwdRst Deregister field. System Action No processing is done. User Action If an PasswordReset de-register of the USERID is desired, enter a Y and press Enter.

VIMM081 ENTER AN 'N' TO ALLOW THE USER TO KEEP THE NEW PASSWORD Explanation This message is displayed when a question mark (?) is entered in the ISPF panel's Expire Password field. System Action No processing is done. User Action If you want the affected user to keep the new password, enter an N and press Enter.

VIMM082 INVALID COMBINATION NEW PASSWORD AND VERIFY PASSWORD ARE REQUIRED WHEN EXPIRE PASSWORD IS 'N'

Explanation N was specified in the ISPF panel's Expire Password field, but the ISPF panel's New Password and Verify Password fields were not specified. System Action No processing is done. User Action If the new password is to kept for use by the affected user, enter an N and press Enter.

VIMM083 NOT REGISTERED THE USER IS NOT REGISTERED TO PASSWORDRESET ON THIS SYSTEM

Explanation Y was specified in the ISPF panel's PwdRst Deregister field, but specified User ID was not registered to PasswordReset. System Action No processing is done. User Action None.



VIMM084 NOT REGISTERED THE USER IS NOT REGISTERED TO PASSWORDRESET AND YOU ARE NOT LICENSED TO USE PASSWORDRESET

Explanation Y was specified in the ISPF panel's PwdRst Deregister field, but specified User ID was not registered to PasswordReset and the Identity Manager is not licensed on the system. System Action No processing is done. User Action None.

VIMM085 DEREGISTERED THE USER WAS DEREGISTERED FROM PASSWORDRESET, BUT YOU ARE NOT LICENSED TO USE PASSWORDRESET

Explanation Y was specified in the ISPF panel's PwdRst Deregister field, but specified User ID was not registered to PasswordReset and the Identity Manager is not licensed on the system. System Action The User ID specified in the ISPF panel User ID to Process field was deregistered from PasswordReset. User Action None.

I d e n t i t y M a n a g e r T S O M e s s a g e s ( V I M )


Chapter 5. Identity Manager TSO Messages (VIM) VIMPWSE VRAAXCMD RC=20 NRECS=0 TR15=14 FRC=FFFFFFFF FRS=38

FABCD=FFFFFFFF Explanation The VANLOAD library has lost APF authorization. System Action No processing is done. User Action APF authorizes the VANLOAD library by placing the proper definition in the SYS1.PARMLIB member PROGnn member or in the LINKLIST. Note: You may dynamically APF authorize the library using the SETPROG Command.

VIM001I PROCESSING SUCCESSFUL Explanation All processing requested was successful. System Action User profile updated.

VIM002E RACF NOT ACTIVE RACF REQUIRED FOR VRAPW COMMAND

Explanation RACF is not currently active. System Action No processing is done.

VIM003E PARSE ERROR - IKJPARS RC = X'XXXXXXXX'. Explanation IKJPARS encountered an error parsing the command. System Action No processing is done.

VIM004E NO USER ACEE YOU MUST BE RACF DEFINED TO USE VANGUARD IDENTITY MANAGER

Explanation No ACEE was found for the user that issued the VIM command. This is usually caused by the user not being validated by RACF when logging on to the system. System Action No processing is done.



VIM005E NEW PASSWORD AND VERIFY PASSWORD ARE NOT THE SAME. Explanation The password value entered with the NPWD and the VPWD keywords is not the same. System Action No processing is done. User Action Re-issue the command and ensure that the same password value is specified for both keywords.

VIM006E INVALID REQUEST - REVOKE AND RESUME BOTH SPECIFIED. Explanation Both the REVOKE and RESUME keywords were specified on the VIM command. Only one is allowed per command. System Action No processing is done. User Action Re-issue the command with only one of the keywords.

VIM007E INVALID REQUEST - INTERVAL AND NOINTERVAL BOTH SPECIFIED Explanation Both the INTERVAL AND NOINTERVAL keywords were specified on the VIM command. Only one is allowed per command. System Action No processing is done. User Action Re-issue the command with only one of the keywords.

VIM008E INVALID INTERVAL - VALUE MUST BE FROM 0 TO 254, INCLUSIVE. Explanation The value specified with the INTERVAL keyword is out of range. It must be between one and 254. System Action No processing is done. User Action Re-issue the command with a valid INTERVAL value.



VIM009E INVALID PASSWORD - NEW PASSWORD ALREADY IN PASSWORD HISTORY Explanation The password specified via the NPWD keyword is not valid because it is either the same as the users current password or in the users password history. System Action No processing is done. User Action Re-issue the command with a different value for the password.

VIM010E INSUFFICIENT AUTHORITY - INTERVAL REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The INTERVAL keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the INTERVAL keyword, the command issuer must have the RACF SPECIAL attribute.

VIM011E INSUFFICIENT AUTHORITY - NOINTERVAL REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The NOINTERVAL keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the NOINTERVAL keyword, the command issuer must have the RACF SPECIAL attribute.

VIM012E INSUFFICIENT AUTHORITY - COMPRESS REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The COMPRESS keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the COMPRESS keyword, the command issuer must have the RACF SPECIAL attribute.



VIM013E INSUFFICIENT AUTHORITY - NOT AUTHORIZED TO USE VANGUARD IDENTITY MANAGER FOR THIS USER ID

Explanation The VIM command can only be issued by users with either the RACF SPECIAL attribute or users with READ access to specific profiles in the RACF FACILITY class. System Action No processing is done. User Action The command issuer does not have authority by either of these means. Contact your security administrator to gain the necessary authorization.

VIM014E ERROR EXTRACTING DEFAULT GROUP INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine the default group of the user specified in the command. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM015E ERROR IN AUTHORIZATION CHECKING INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine if the issuer of the command has READ access to the RACF FACILITY class profiles. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIM016E ERROR PROCESSING PASSWORD HISTORY INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine if the new password was equal to the current password, equal to a password in the password history, or while attempting to update the password history with the current password. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM017E ERROR PROCESSING NEW PASSWORD INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to update the user’s profile with the password. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM018E ERROR PROCESSING REVOKE/RESUME INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to set the interval for the user for either the INTERVAL or NOINTERVAL keywords. System Action If a new password was specified then it was already processed. Any other processing requested is not done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIM019E ERROR PROCESSING INTERVAL/NOINTERVAL INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to update the user’s profile with the password. System Action If a new password was specified then it was already processed. If either REVOKE or RESUME was specified then it was also processed. Any other processing is not done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM020E ERROR COMPRESSING PASSWORD HISTORY INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to compress the users password history. System Action All processing other than compressing the users password history has already been processed. The users password history is not compressed. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM021E UNKNOWN RETURN CODE RECEIVED INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command received an unknown return and or reason code while processing the command. System Action Processing is halted. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM022E NO FUNCTION REQUESTED Explanation The VIM command was not requested to perform any function. This is caused by only specifying a userid with no other keyword(s). System Action No processing is done. User Action Re-issue the command with the keywords necessary to perform the functions desired.



VIM023E VANGUARD IDENTITY MANAGER LOAD MODULE IS NOT AUTHORIZED Explanation The VIM command load Module is not APF authorized. System Action No processing is done. User Action Take the steps necessary to authorize the load Module. If you need additional assistance, call Vanguard Technical Support.

VIM024E USERID NOT FOUND IN THE RACF DATABASE Explanation The userid specified on the VIM command was not found in the RACF database. System Action No processing is done. User Action Ensure that the userid is entered correctly and reissue the command.

VIM025E INTERVAL VALUE TOO LARGE - IT MUST BE LESS THAN OR EQUAL TO THE SETROPTS INTERVAL VALUE

Explanation The value specified on the INTERVAL keyword, while between 1 and 254 is larger than the maximum defined by your installation via the RACF SETROPTS command. System Action If a new password was specified then it was already processed. If either REVOKE or RESUME was specified then it was also processed. Any other processing is not done. User Action Re-issue the command with a smaller value.

VIM026E INVALID REQUEST - REVOKE AND HREVOKE BOTH SPECIFIED Explanation Both the REVOKE and HREVOKE keywords were specified on the VIM command. Only one is allowed per command. System Action No processing is done. User Action Re-issue the command with only one of the keywords.



VIM027E INVALID REQUEST - RESUME AND HREVOKE BOTH SPECIFIED Explanation Both the RESUME and HREVOKE keywords were specified on the VIM command. Only one is allowed per command. System Action No processing is done. User Action Re-issue the command with only one of the keywords.

VIM028E INSUFFICIENT AUTHORITY - RESUMING HARD REVOKED USER REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The HREVOKE keyword was specified and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to specify the HREVOKE keyword, the command issuer must have the RACF SPECIAL attribute.

VIM029E INSUFFICIENT AUTHORITY - HREVOKE REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The RESUME keyword was specified for a user that is hard revoked and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to RESUME a hard revoked userid, the command issuer must have the RACF SPECIAL attribute.

VIM030E ERROR TESTING FOR HARD REVOKE INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine if the userid being resumed was hard revoked. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIM032E NOT AUTHORIZED TO EXECUTE THE VANGUARD IDENTITY MANAGER. Explanation You are not authorized to use the Identity Manager via VRA$.PASSWORD in the RACF FACILITY class.. System Action No processing is done. User Action Report this condition to your system support staff.

VIM033E INSUFFICIENT AUTHORITY - PWRDEREG REQUIRES RACF SPECIAL ATTRIBUTE

Explanation The PWRDEREG keyword was specified for a user and the command issuer does not have the RACF SPECIAL attribute. System Action No processing is done. User Action In order to deregister a user from PasswordReset, the command issuer must have the RACF SPECIAL attribute.

VIM034E ERROR EXTRACTING CONNECT GROUPS INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine the list of connect groups for the user specified in the command. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM035E ERROR EXTRACTING PASSWORDRESET USERDATA INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine if the user specified in the command is registered to PasswordReset. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.



VIM036E ERROR DELETING PASSWORDRESET USERDATA INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to delete the PasswordReset information from the RACF database for the userid specified in the command. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM037I USER WAS NOT REGISTERED TO PASSWORDRESET Explanation You specified Y in the ISPF panel's PwdRst Deregister field, but the User ID specified in the ISPF panel's User ID to Process field was not registered to PasswordReset. System Action None. User Action None.

VIM038I USER WAS NOT REGISTERED TO PASSWORDRESET PASSWORDRESET IS NOT LICENSED FOR THIS SYSTEM

Explanation You specified Y in the ISPF panel's PwdRst Deregister field, but the User ID specified in the ISPF panel's User ID to Process field was not registered to PasswordReset. Also, Vanguard PasswordReset is not licensed on this system. System Action None. User Action None.

VIM039I USER WAS DEREGISTERED FROM PASSWORDRESET PASSWORDRESET IS NOT LICENSED FOR THIS SYSTEM

Explanation You specified Y in the ISPF panel's PwdRst Deregister field and Vanguard PasswordReset is not licensed on this system. System Action The User ID specified in the ISPF panel User ID to Process field was deregistered from PasswordReset. User Action None.



VIM040E THE REQUEST WAS NOT ALLOWED - THE USERID IS PROTECTED. CONTACT YOUR SECURITY ADMINISTRATOR.

Explanation Protected User IDs are created for special purposes and do not have a password associated with them. Changes to protected User IDs must be made through a different method. System Action No change was made. User Action If the protected userid should no longer be protected, use native RACF or a different Administrator option to cause this change.

VIM041E ERROR TESTING FOR PROTECTED STATUS INTERNAL ERROR, RC=X'XXXXXXXX' RSC=X'YYYYYYYY'

Explanation The VIM command encountered an error while attempting to determine if the User ID being processed is in PROTECTed status. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM049E ICHPWX01 USER EXIT REJECTED THE NEW PASSWORD AS INVALID Explanation The new password that was specified has been rejected by the ICHPWX01 exit installed at the installation. System Action The password is not changed. User Action Re-issue the request with a valid password.

VIM050E ICHPWX01 USER EXIT REJECTED THE NEW INTERVAL AS INVALID Explanation The interval value specified has been rejected by the ICHPWX01 exit installed at the installation. System Action The password interval is not changed. User Action Re-issue the command with only the LIST keyword.



VIM055E THE LIST KEYWORD IS MUTUALLY EXCLUSIVE WITH ALL OTHER KEYWORDS

Explanation When the LIST keyword is specified no other keyword parameter is permitted. System Action No processing is done. User Action Re-issue the request with a valid password.

VIM059E INVALID REVOKE DATE, IT MUST BE IN THE FUTURE. Explanation The REVOKE date entered is not in the future. System Action No processing is done. User Action Retry with a REVOKE date in the future.

VIM060E INVALID RESUME DATE, IT MUST BE IN THE FUTURE. Explanation The RESUME date entered is not in the future. System Action No processing is done. User Action Retry with a RESUME date in the future.

VIM061E REVOKE WITH DATE IS INVALID BECAUSE THE USER IS CURRENTLY HARD REVOKED.

Explanation A user that is Hard Revoked cannot have a pending revoke set. System Action No processing is done. User Action Resume the user before attempting a pending revoke, or leave the user in Hard Revoke status.

VIM062E RESUME WITH DATE IS INVALID BECAUSE THE USER IS CURRENTLY HARD REVOKED.

Explanation A user that is Hard Revoked cannot have a pending resume set. System Action No processing is done. User Action Resume the user and set a normal revoke before attempting a pending resume, or leave the user in Hard Revoke status.

VIM063E ERROR GETTING REVOKE AND RESUME DATES. INTERNAL ERROR, RC=‘NN’ RSC=‘NN’

Explanation An internal program error occurred getting the revoke and resume dates. System Action



No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM064E ERROR SETTING REVOKE DATE. INTERNAL ERROR, RC=‘NN’ RSC=‘NN’

Explanation An internal program error occurred attempting to set the revoke date. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM065E ERROR SETTING THE RESUME DATE. INTERNAL ERROR, RC=‘NN’ RSC=‘NN’

Explanation An internal program error occurred attempting to set the resume date. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

VIM066W RESUME IGNORED, THE USER IS NOT REVOKED. Explanation A user that is not revoked cannot be resumed. System Action No processing is done. User Action None.

VIM067W REVOKE DATE IGNORED, THE USER IS ALREADY REVOKED. Explanation A revoked user cannot have a pending revoke set. System Action No processing is done. User Action Resume the user before setting a pending revoke, or leave the user revoked.

VIM068E ERROR TESTING FOR REVOKE. INTERNAL ERROR, RC=‘NN’ RSC=‘NN’

Explanation An internal program error occurred testing for revoke status. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your



system support staff. VIM069E ERROR CONVERTING DATE FORMAT.

INTERNAL ERROR, RC=‘NN’ RSC=‘NN’ Explanation An internal program error occurred attempting to convert the date format. System Action No processing is done. User Action Report the return code (RC) and reason code (RSC) values to your system support staff.

D i s t r i b u t e d I d e n t i t y M a n a g e r M e s s a g e s ( V I M )


Chapter 6. Distributed Identity Manager Messages (VIM) VIM100E DISTRIBUTED FUNCTION NOT ENABLED. CONTACT SECURITY ADMIN.

Explanation A RACF database has been specified, but Distributed Identity Manager has not been enabled. System Action The function is not executed. User Action Contact your support staff if you expected this function to work. The VRATPMAP configuration Module has not been defined.

VIM101E THE RACF DATABASE ID XX IS INVALID. ENTER HELP FOR MORE INFO. Explanation The specified RACF database ID has not been defined to Distributed Identity Manager. System Action The function is not executed. User Action Specify a RACF database ID that has been defined by your support staff. It must be defined in the VRATPMAP Module.

VIM102E NO CPIC TPMAP EXISTS FOR RACF DATABASE ID XX. CONTACT SECURITY ADMIN.

Explanation The RACF database ID specified is valid, but this database ID cannot be accessed through the ISPF or TSO implementations of Distributed Identity Manager. System Action The function is not executed. User Action Verify if you have entered the proper RACF database ID as supplied by your support staff.



VIM103E VRAPWDL FAILED, RC = XX, RACF DATABASE ID = YY. Explanation An unexpected error occurred while looking up a RACF database ID. System Action The function is not executed. User Action Report the message received, the return code (rc) and RACF database ID (yy) to the support staff. Contact Vanguard customer support with this information.

VIM104E VRWPWCL RECEIVE BUFFER NOT LARGE ENOUGH. REPORT TO SECURITY ADMIN.

Explanation This is an internal error. System Action The request has been executed, but all result messages are not available for display. User Action Report this message to your support staff. This error should be reported to Vanguard customer support.

VIM105E TRANSACTION NOT DEFINED ON SERVER. CONTACT SECURITY ADMIN. Explanation Distributed Identity Manager cannot execute at its intended location due to configuration error. System Action The function is not executed. User Action Report this error to your support staff. The APPC server transaction has not been defined to APPC/MVS at the intended destination.

VIM106E SERVER TRANSACTION HAS ABENDED. CONTACT SECURITY ADMIN. Explanation The Distributed Identity Manager server transaction has abnormally terminated. System Action The server transaction that was scheduled on the destination APPC/MVS server has been terminated. A dump may be available. User Action Report to your support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host.

D i s t r i b u t e d I d e n t i t y M a n a g e r M e s s a g e s ( V I M )


VIM107E VRAPWCL XX RC = YY, STATUS = ZZ, DATA = DD. REPORT TO SECURITY ADMIN.

Explanation A communications error occurred while performing a Distributed Identity Manager function. The function is not executed. System Action None. User Action Report this message, including function (xx), return code (yy), status code (zz) and data state (dd). The error occurred doing either a CPIC cmrecv or cmallc function (xx). The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host. The return code (yy) is the CPIC return code.

VIM108E VRAPWCL CMPTR FAILED, RC = XX Explanation A communications error occurred while performing a Distributed Identity Manager function. The CPIC cmptr verb failed. System Action The request is terminated. User Action Report this message, including the return code (xx), to support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host. The return code (xx) is the CPIC return code.

VIM109E VRAPWCL CMSEND FAILED, RC = XX Explanation A communications error occurred while performing a Distributed Identity Manager function. The CPIC cmptr verb failed. System Action The request is terminated. User Action Report this message, including the return code (xx), to support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host. The return code (xx) is the CPIC return code.



VIM110E VRAPWCL CMDEAL RC = XX Explanation A communications error occurred while performing a Distributed Identity Manager function. The CPIC cmdeal verb failed. System Action The request has completed properly, but an unforeseen condition has occurred during cleanup. User Action Report this message, including the return code (xx), to support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host. The return code (xx) is the CPIC return code.

VIM111E VRAPWCL CMINIT FAILED, RC = XX Explanation A communications error occurred while performing a Distributed Identity Manager function. The CPIC cminit verb failed. System Action The function is not executed. User Action Report this message, including the return code (xx), to the support staff. The Distributed Identity Manager client is unable to establish a communications path to the host represented by the RACF database ID specified. The return code (xx) is the CPIC return code.

VIM112E SERVER FAILED SECURITY CHECK. CONTACT SECURITY ADMIN. Explanation The Distributed Identity Manager transaction cannot be executed due to a security environment mismatch or setup environment. System Action The function is not executed. User Action Report this message to your support staff. This can be due to the User ID who is executing the request is not defined as the same User ID on the host representing the RACF database ID. Another reason is that RACF APPCLU profiles are not properly set up to create an ALREADYV environment.

I d e n t i t y M a n a g e r C I C S M e s s a g e s ( V I M )


Identity Manager CICS Messages (VIM) VIMPWSE VRAAXCMD RC=20 NRECS=0 TR15=14 FRC=FFFFFFFF FRS=38

FABCD=FFFFFFFF Explanation The VANLOAD library has lost APF authorization. System Action No processing is done. User Action APF authorizes the VANLOAD library by placing the proper definition in the SYS1.PARMLIB member PROGnn member or in the LINKLIST. Note: You may dynamically APF authorize the library using the SETPROG Command.

VIM120E APPC RECEIVE BUFFER TOO SMALL Explanation An internal receive buffer has filled. System Action The Distributed Identity Manager function has completed, but all messages returned may not be displayed. User Action Report this message to your support staff. This is an internal error in Distributed Identity Manager for CICS.

VIM121E RACF DATABASE ID HOST IS NOT CONNECTED OR NOT DEFINED. Explanation The specified host represented by the RACF database ID is not connected. The RACF database ID is valid. System Action The function is not executed. User Action Report to your support staff. The CICS connection is not in ACQuired state, or the connection definition does not exist.

VIM122E TRANSACTION NOT DEFINED ON SERVER. CONTACT SECURITY ADMIN. Explanation Distributed Identity Manager cannot execute the APPC/MVS server transaction at its intended location due to configuration error. System Action The function is not executed. User Action Report this error to your support staff. The APPC server transaction has not been defined to APPC/MVS at the intended destination.



VIM123E SERVER FAILED SECURITY CHECK. CONTACT SECURITY ADMIN. Explanation The Distributed Identity Manager transaction cannot be executed due to a security environment mismatch or setup environment. System Action The function is not executed. User Action Report this message to your support staff. This can be due to the User ID who is executing the request is not defined as the same User ID on the host representing the RACF database ID. Another reason is that RACF APPCLU profiles are not properly set up to create an ALREADYV environment.

VIM124E SERVER ABENDED THE VIM COMMAND. CONTACT SECURITY ADMIN. Explanation The Distributed Identity Manager server transaction has abnormally terminated. System Action The function has not executed. User Action Report to your support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host.

VIM125E TRANSACTION ABEND 08640000. CONTACT SECURITY ADMIN. Explanation The Distributed Identity Manager server transaction has abnormally terminated. System Action The function has terminated. User Action Report to your support staff. The host RACF database ID specified may contain additional information. Check the joblog of the APPC/MVS server transaction on that host. There may be a dump available for the server transaction on the destination host.

VIM126E APPC ERROR - EIBERRCD = XXXXXXXX. REPORT TO SECURITY ADMIN. Explanation An unforeseen APPC error has occurred in the CICS VIM transaction. System Action The function has been terminated. User Action Report the message and error code (xxxxxxxx) to support staff.

I d e n t i t y M a n a g e r C I C S M e s s a g e s ( V I M )


VIM127E USER ID MUST BE SPECIFIED. Explanation No User ID has been specified in the "User ID to Process" field. System Action The user is re-prompted for this input. User Action Enter the required data.

VIM128E RACF DATABASE ID SPECIFIED IS NOT DEFINED. Explanation The specified RACF database ID does not exist. System Action The user is re-prompted for this input. User Action Enter a valid RACF database ID

VIM129E VALID RACF DATABASE ID, BUT CICS DOES NOT HAVE ACCESS. Explanation The specified RACF database ID exists, but is not accessible from CICS. System Action The user is re-prompted for this input. User Action Enter a valid RACF database ID with CICS access. If this ID is valid, contact your support staff. There is no TPENTRY TYPE= CICS macro under the TPMAP macro in the VRATPMAP Module. The RACF database ID specified.

VIM130E THE VRATPMAP MODULE IS MISSING. CONTACT THE CICS ADMINISTRATOR.

Explanation Distributed Identity Manager for CICS has not been properly set up. System Action The function is not executed. User Action Contact your support staff. The VRATPMAP load Module is either not available from the CICS load libraries, or there is no PROGRAM definition for the VRATPMAP Module.



VIM131I PLEASE VERIFY THE DEFAULT RACF DATABASE ID AND PRESS ENTER AGAIN.

Explanation The default RACF database ID has not been specified. System Action Default RACF database ID has been filled in. User Action Verify the default RACF database ID. Change it if necessary. If the default is incorrect, contact your support staff.

VIM132E THIS FIELD MUST BE 'Y' OR 'N'. Explanation The field on which the cursor is positioned requires input of Y for yes or N for no. System Action The user is prompted for corrective action. User Action Specify Y or N in the field shown by cursor position.

A d m i n i s t r a t o r M e s s a g e s ( V R A )


Chapter 7. Administrator Messages (VRA) VRAE900E CONTACT VANGUARD TECHNICAL SUPPORT.

SYSTEM RETURN CODE = <system-return-code>, RETURN CODE=<return-code>, REASON CODE=<reason-code>, FEEDBACK CODE=<feedback-code>

Explanation Administrator issues this message any time a critical error occurs. User Action Make note of all return codes, reason codes, and feedback codes, then call Vanguard Technical Support for further instruction.

VRA0000E UNDEFINED MESSAGE ID <message-ID>, PGM= <program-name> Explanation Program VRAAFMSG was passed a message ID that was not defined. The message could not be formatted and displayed. Message ID is the message ID in error; Program is the report program that passed message ID. User Action Contact Vanguard Technical Support.

VRA0001E REQUIRED CONTROL STATEMENT MISSING: STATEMENT, PGM=PROGRAM Explanation A batch job was submitted and a required SYSIN control card statement was not specified. Statement is the missing statement. Program is the program being executed. User Action Correct and rerun.

VRA0002E UNEXPECTED CONTROL STATEMENT FOUND: STATEMENT,PGM= PROGRAM Explanation A batch job was submitted and an unexpected SYSIN control card statement was encountered. Statement is the unexpected statement. Program is the report program being executed. User Action Correct and rerun.



VRA0003E UNEXPECTED ERROR CALLING CONTROL STATEMENT PARSING PROGRAM FUNCT= FUNCTION,PGM= PROGRAM

Explanation A batch report was submitted and an unexpected function code (function) was returned to program while parsing the SYSIN control statements. User Action Contact Vanguard Technical Support.

VRA0004E INVALID PARAMETER SPECIFIED FOR STATEMENT: STATEMENT,PGM= PROGRAM

Explanation A batch report was submitted and a valid SYSIN control statement had an invalid parameter specified. Statement is the statement in error. Program is the report program being executed. User Action Correct and rerun.

VRA0005E INVALID SORT PARAMETER SPECIFIED:PARAMETER,PGM= PROGRAM Explanation A batch report was submitted. A SORT control statement was encountered with an invalid parameter. Parameter is the parameter in error. Program is the report program being executed. User Action Correct and rerun.

VRA0006E INVALID SORT ORDER, MUST BE A OR D PARAMETER,PGM= PROGRAM Explanation A batch report was submitted. A SORT control statement was encountered with an invalid sort order specified. Valid sort orders are A for ascending or D for descending. Parameter is the sort order specified. Program is the report program being executed. User Action Correct and rerun.

VRA0007E TOO MANY SORT FIELDS SPECIFIED,PGM= PROGRAM Explanation A batch report was submitted. SORT control statement(s) were specified and you have exceeded the amount of sort fields that can be sorted. No more than 20 fields can be sorted per report. Program is the report program being executed. User Action Omit some of the sort fields and rerun.



VRA0008E CLOSING ) NOT FOUND FOR CONTROL STATEMENT: STATEMENT,PGM= PROGRAM

Explanation A batch report was submitted and a SYSIN control statement with an open parenthesis but NO closing parenthesis. Statement is the statement in error. Program program is the report program being executed. User Action Ensure that control statements do not exceed column 71. Columns 72 through 80 are not usable. If closing parenthesis was not specified, correct the statement.

VRA0009E END CONTROL STATEMENT MISSING STATEMENT,PGM= PROGRAM Explanation A batch report or command was submitted and an ending (END) control statement was not specified before the next report or command was requested. VRA0009E occurs when two REPORT(report name) or COMMAND(command) statements exist without an intermediate REPORT(END) or COMMAND(END). Statement is the report or command attempting to process. program is the report program being executed. User Action Correct and rerun.

VRA0010E MEMBER MEMBER NOT FOUND IN OPTIONS LIBRARY Explanation When reading the Vanguard options library, allocated to ddname VIPOPTS, member member could not be found. User Action Add the missing member to the Vanguard options library and rerun.

VRA0011E VIPOPTS DD STATEMENT MISSING Explanation The DD statement defining the VIPOPTS (Vanguard options library) data set could not be located. User Action Add VIPOPTS DD statement and rerun.

VRA0012E UNEXPECTED ERROR IN PROGRAM VRAAGOPT,RC= RC Explanation Program VRAAGOPT reads the Vanguard options library allocated to ddname VIPOPTS and encountered an unexpected error. RC is the return code. 16 - invalid function code was passed to program VRAAGOPT 24 - internal logic error Other - severe error User Action Contact Vanguard Technical Support



VRA0019E REPORT OR COMMAND IS NOT VALID: TITLE,PGM=PROGRAM Explanation A batch report or command was submitted and a SYSIN REPORT(title) or COMMAND(title) control card specified an invalid report or command. Title is the report or command requested. Program program is the program being executed. User Action Correct the REPORT or COMMAND statement and rerun.

VRA0020E A SEVERE ERROR OCCURRED DURING BATCH PROCESSING, PROCESSIN STOPS.

Explanation A batch job was aborted due to a severe error. Refer to previous message for a description of the problem. User Action Correct and rerun.

VRA0021I PROCESSING TITLE Explanation A batch job is processing and title is the type of processing occurring. User Action None.

VRA0022I PROCESSING COMPLETED Explanation A batch report or command has completed processing successfully. Processing continues to next report or command request. User Action None.

VRA0026E ERROR PROCESSING SVSAM FILE,CODE=CODE,FUNCT=FUNCTION,PGM=PROGRAM, TRACE=TR

Explanation Program program was processing against the SVSAM file when an error occurred. Function indicates the function being attempted, code identifies the error and TR is the program trace code. A COBOL generated VSAM status code is written to ddname VIPOUT. Code has the following meanings:

Code Description E End of file J Duplicate record O Severe IO Error. In most cases the file is empty. Otherwise, the file is

corrupt. N Record not found

User Action Review code messages and messages located in ddname VIPOUT, correct and rerun.



VRA0027E ERROR PROCESSING MVSAM FILE,CODE=CODE,FUNCT=FUNCTION,PGM=PROGRAM, TRACE=TR

Explanation Program program was processing against the MVSAM file when an error occurred. Function is the function being attempted, code identifies the error and TR is the program trace code. A COBOL generated VSAM status code is written to ddname VIPOUT. Code has the following meanings:

Code Description E End of file J Duplicate record O Severe IO Error. In most cases the file is empty. Otherwise, the file is

corrupt. N Record not found

User Action Review code messages and messages located in ddname VIPOUT, correct and rerun.

VRA0028E INCOMPATIBLE VERSION OF EXTRACT FILES BEING USED FILE=FILEVRSN,PROGRAM=PGMVRSN, PGM=PROGRAM

Explanation The extract files being used are not from the same version of the product as the program processing against it. Filevrsn is the version from the SVSAM file and pgmvrsn is the version from the program. Program is the program executing when the error occurred. User Action Correct and rerun.

VRA0029E RACF ID <ID> NOT FOUND Explanation A RACF ID was specified that does not exist in the Extract files. ID is the RACF ID not found. User Action Correct and rerun.

VRA0030W RACF USER ID <USERID> NOT FOUND Explanation A function was requested specifying a RACF User ID but the User ID was not found in the Administrator's extract data sets. Userid is the RACF User ID not found. All valid User IDs are processed. User Action Verify the User ID specified and retry.

VRA0031I RACF CONNECT GROUP: ‘GROUP' FOR USERID: 'USERID' NOT FOUND. Explanation DB2LOAD process could not find Group connect profile. User Action Run new Extract and run new DB2LOAD.



VRA0031W RACF GROUP <GROUP> NOT FOUND Explanation A function was requested specifying a RACF group but the group was not found in the Administrator's extract data sets. Group is the RACF group not found. All valid groups are processed. User Action Verify the group specified and retry.

VRA0032W RACF DATA SET <DATASET> NOT FOUND Explanation A function was requested specifying a RACF data set profile but the profile was not found in the Administrator's extract data sets. Dataset is the RACF data set not found. All valid data sets are processed. User Action Verify the data set specified and retry.

VRA0033W RACF RESOURCE PROFILE PROFILE NOT FOUND Explanation A function was requested that specified a RACF resource profile but the profile was not found in the Administrator's extract data sets. Profile is the RACF resource profile not found. All valid resource profiles are processed. User Action Verify the resource profile specified and retry.

VRA0034E FORMAT SORT STATEMENT ERROR,RC=RC,PGM=PROGRAM Explanation An error occurred in when requesting an internal sort. Rc is the return code, Program is the program making the sort request. Return code has the following meanings: Issuing Module: VRAAESRT

Return Code

Description

8 Invalid function code was passed to program VRAAESRT

12 The sort was requested but sort parameters not specified

16 Too many sort parameters were passed to VRAAESRT User Action Verify the data set specified and retry.



VRA0035E SORT DATA SERVICE ERROR,RC=RC,RS=RS,PGM=PROGRAM,TRACE=TR,S99ERROR=S99ERROR,S99INFO=S99INFO

Explanation An error occurred in the SORT Data Service routine. Rc is the return code, rs is the reason code, tr is the program trace code returned by program program. If an SVC99 error is the cause of the error then s99error contains the SVC99 reason code and s99info contains the SVC99 information code. Return code has the following meanings:

Return Code Description

8 Error in control block

12 Reason 0 = ID (eyecatcher)is not VRSO

Reason 1 = Product ID contains invalid characters

Reason 2 = The SORT statement did not end in a blank

Reason 0 = Error allocating SORTIN

Reason 1 = Error allocating SORTOUT

Reason 2 = Error allocating one of the SORTWK files

Reason 3 = Error allocating SYSOUT

16 Error executing the SORT Check WTO messages for diagnostic messages.

User Action Contact Vanguard Technical Support.

VRA0037E STORE/READ DATA SERVICE ERROR,FUNCT=FUNCTION,RC=RC,RS=RS,PGM=PROGRM,TRACE=TR,S99ERROR=S99EROR,S99INFO=S99INF

Explanation An error occurred in the Store/Read Data Service routine. Function is the function being attempted. Rc is the return code, rs is the reason code, and tr is the program trace code returned by program program. If an SVC99 error is the cause of the error then s99error contains the SVC99 reason code and s99info contains the SVC99 information code. User Action Contact Vanguard Technical Support.



VRA0038E SUBMIT JCL ISPF SERVICE ERROR,RC=RC,RS=RS,PGM=PROGRAM, S99ERRORS99ERROR, S99INFO=S99INFO

Explanation An error occurred in the Submit JCL ISPF Service routine. Rc is the return code, rs is the reason code, program is the program that called this service. If an SVC99 error is the cause of the error then s99error contains the SVC99 reason code and s99info contains the SVC99 information code.

Return Code Description

8 Error in control block

Reason 0 = ID (eyecatcher) is not VRSJ

Reason 1 = Product ID contains an invalid first character

Reason 2 = Product ID contains invalid characters

12 ISPF Skeleton not found

16 Error allocating ISPFILE

Reason 0 = dynamic allocation error. SVC 99 error and information codes are returned in SVC99R and SVC99I


VRA0040E EXTRACT SVSAM FILE ERROR, VSAM STATUS CODE=CODE Explanation The VSAM data set allocated to DDname SVSAM experience a severe error during an OPEN operation. Code is the COBOL VSAM status code returned. These codes are identified in IBM's VS COBOL II Language Reference manual. The most common cause for these types of errors is an empty file or allocating an incompatible version of the Administrator VSAM extract file. User Action Correct and retry.

VRA0041E EXTRACT MVSAM FILE ERROR, VSAM STATUS CODE=CODE Explanation The VSAM data set allocated to DDname MVSAM experience a severe error during an OPEN operation. Code is the COBOL VSAM status code returned. These codes are identified in IBM's VS COBOL II Language Reference manual. The most common cause for these types of errors is an empty file or allocating an incompatible version of the Administrator VSAM extract file. User Action Correct and retry.

VRA0042E INVALID APPLID USED TO START ADMINISTRATOR Explanation The Administrator was started with NEWAPPL(APPLID). This version of Administrator must be started with: NEWAPPL(APPLID). User Action Please have your Administrator product administrator correct and rerun.



VRA0045E AAAAAAAA TSOLNK ERROR, R15=XXXXXXXX, RETC=XXXXXXXX, REASNCD=XXXXXXXX, ABENDCD=XXXXXXXX

Explanation A TSOLNK ERROR was detected. The AAAAAAAA and all the XXXXXXXX fields are replaced with the appropriate information. User Action Contact Vanguard Technical Support.

VRA0046E AAAAAAAA STACK ERROR – DATASET=OUTDD, R15=XXXXXXXX Explanation A STACK ERROR – DATASET=OUTDD was detected. The AAAAAAAA and XXXXXXXX field are replaced with the appropriate information. User Action Contact Vanguard Technical Support.

VRA0047E AAAAAAAA STACK ERROR – DELETE TOP, R15=XXXXXXXX Explanation A STACK ERROR – DELETE TOP was detected. The AAAAAAAA and XXXXXXXX field are replaced with the appropriate information. User Action Contact Vanguard Technical Support.

VRA0048E AAAAAAAA OPEN ERROR FOR DDNAME=XXXXXXXX Explanation An OPEN ERROR for a specific ddname was detected. The AAAAAAAA and XXXXXXXX field are replaced with the appropriate information. User Action Contact Vanguard Technical Support.

VRA0049E AAAAAAAA GETMAIN ERROR, R15=XXXXXXXX Explanation A GETMAIN ERROR was detected. The AAAAAAAA and XXXXXXXX field are replaced with the appropriate information. User Action Contact Vanguard Technical Support.

VRA0050E AAAAAAAA DYNAMIC ALLOCATION ERROR, R15=XXXXXXXX Explanation A DYNAMIC ALLOCATION ERROR was detected. The AAAAAAAA and XXXXXXXX field are replaced with the appropriate information. User Action Contact Vanguard Technical Support.



VRA0052E ERROR ENCOUNTERED WHILE ALLOCATING SMS CLASS FOR FILES: ISPWRK1 ISPWR

Explanation SMS error was encountered when allocating on-line work files User Action If error occurs while performing DB2 functions, re-install DB2 and specify valid SMS storage, data and management classes in the <User Initialization - Dataset> screen. If error occurs performing any other function, invoke the Initializing Administrator option, specify valid SMS classes as applicable.

VRA0053E AAAAAAAA – MEMORY BUFFER NOT BIG ENOUGH Explanation Insufficient space in the memory buffer. User Action Contact Vanguard Technical Support.

VRA0054E AAAAAAAA – INVALID NUMBER OF PARMS PASSED Explanation An Invalid number of parms were passed to the program. User Action Contact Vanguard Technical Support.

VRA0055E AAAAAAAA – A VALID TSO ENVIRONMENT DOES NOT EXIST Explanation A valid tso environment does not exist. User Action Contact Vanguard Technical Support.

VRA0057E ERROR ENCOUNTERED WHILE EDITING COMMAND FILE: Explanation You are editing hlq.VRA.COMMAND dataset in split screen mode. User Action Back out of split screen mode and try again. If the problem persists, Contact Vanguard Technical Support.

VRA0064E INVALID DATA SET PROFILE: XXXXXXXX.XXXXXXXX.XXXXXXXX.XXXXXXXX. XXXXXXXX.

Explanation An error occurred attempting to write the R000 record back. User Action Contact Vanguard Technical Support.

VRA0065E WRITE R000 RECORD BACK Explanation An error occurred attempting to write the R000 record back. User Action Contact Vanguard Technical Support.

VRA0066E READ R000 RECORD Explanation An error occurred attempting to read the R000 record.




VRA0067E GET NEXT SUBGROUP RECORD Explanation An error occurred attempting to read the NEXT Subgroup record. User Action Contact Vanguard Technical Support.

VRA0068E WRITE THE RECORD BACK. Explanation An error occurred attempting to write a record back. User Action Contact Vanguard Technical Support.

VRA0069E GET SUBGROUP RECORD Explanation An error occurred attempting to read a SUBGROUP record. User Action Contact Vanguard Technical Support.

VRA0070E GET SUBGROUP REC FOR GROUP XXXXXXXX Explanation An error occurred attempting to read a Subgroup record for Group XXXXXXXX (where the X’s are replaced by the group name). User Action Contact Vanguard Technical Support.

VRA0071E WRITE GROUP XXXXXXXX REC Explanation An error occurred attempting to write GROUP XXXXXXXX record (where the X’s are replaced by the group name). User Action Contact Vanguard Technical Support.

VRA0072E POS TO FIRST SUB GRP REC Explanation An error occurred attempting to position to the first subgroup record. User Action Contact Vanguard Technical Support.

VRA0073E GET GROUP XXXXXXXX RECORD Explanation An error occurred attempting to read a GROUP XXXXXXXX record (where the X’s are replaced by the group name). User Action Contact Vanguard Technical Support.



VRA0074E UPDATING GROUP XXXXXXXX Explanation An error occurred attempting to update a GROUP XXXXXXXX record (where the X’s are replaced by the group name). User Action Contact Vanguard Technical Support.

VRA0075E READING GROUP XXXXXXXX FOR UPDATE Explanation An error occurred attempting to read GROUP XXXXXXXX for update (where the X’s are replaced by the group name). User Action Contact Vanguard Technical Support.

VRA0076E GET A GEN RECORD Explanation An error occurred attempting to read a General Resource Profile record. User Action Contact Vanguard Technical Support.

VRA0077E POSITION TO FIRST GEN REC Explanation An error occurred attempting to position the file to the first General Resource Profile record. User Action Contact Vanguard Technical Support.

VRA0078E GET A DSN RECORD Explanation An error occurred attempting to read a Dataset Profile record. User Action Contact Vanguard Technical Support.

VRA0079E POSITION TO FIRST DSN REC Explanation An error occurred attempting to position to the first Dataset Profile record. User Action Contact Vanguard Technical Support.

VRA0080E GET A USER RECORD Explanation An error occurred attempting to read a User record. User Action Contact Vanguard Technical Support.

VRA0081E POSITION TO FIRST USR REC Explanation An error occurred attempting to position to the first User record. User Action Contact Vanguard Technical Support.



VRA0082E GET A GROUP RECORD Explanation An error occurred attempting to read a Group record. User Action Contact Vanguard Technical Support.

VRA0083E POSITION TO FIRST GRP REC Explanation An error occurred attempting to position to the first Group record. User Action Contact Vanguard Technical Support.

VRA0084E REWRITE GEN RECORD CLASS = XXXXXXXX ENTITY(01-25)= XXXXXXXXXXXXXXXXXXXXXXXXX ENTITY(26-50)= XXXXXXXXXXXXXXXXXXXXXXXXX

Explanation An error occurred attempting to re-write a General Resource profile record. The Class X’s are replaced with the General Resource Class. The Entity X’s are replaced with positions 1-25 and 26-50 of the Entity field. User Action Contact Vanguard Technical Support.

VRA0085E GET GEN FOR UPDATE CLASS = XXXXXXXX ENTITY(01-25)= XXXXXXXXXXXXXXXXXXXXXXXXX ENTITY(26-50)= XXXXXXXXXXXXXXXXXXXXXXXXX

Explanation An error occurred attempting to read a General Resource profile record for Update. The Class X’s are replaced with the General Resource Class. The Entity X’s are replaced with positions 1-25 and 26-50 of the Entity field. User Action Contact Vanguard Technical Support.

VRA0086E REWRITE DSN RCD - DSN= XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX...XXXX Explanation An error occurred attempting to re-write a Dataset Profile record. User Action Contact Vanguard Technical Support.

VRA0087E GET DSN FOR UPDATE - DSN= XXXXXXXXXXXXXXXXXXXXXXXXXXXXX...XXXX

Explanation An error occurred attempting to read a Dataset Profile record for update. User Action Contact Vanguard Technical Support.



VRA0088E READING FIRST 000 RECORD Explanation An error occurred attempting to read the first 000 record. User Action Contact Vanguard Technical Support.

VRA0089E WRITING 950 RECORD FOR USERID Explanation An error occurred attempting to write a 950 record for Userid. User Action See message VRA0096E for error codes.

VRA0090E READING USER ID USERID FOR UPDATE Explanation An error occurred attempting to read the 200 records for User ID Userid. User Action See message VRA0096E for error codes.

VRA0091E EXTRACT FILE IS NOT FULLRUN OR USER FULLRUN ######################################### #### W A R N I N G #### ######################################### # # # IF YOU MARK A PARTIAL EXTRACT AS A # # FULL RUN, NO ADMINISTRATOR COMMANDS # # CAN BE EXECUTED AGAINST IT AND ALL # # REPORTS WILL CARRY A NOTATION OF THIS # # FACT. WHEN A PART OF THE RACF DATA- # # BASE IS NOT REFLECTED IN THE OUTPUT # # DATASETS, REPORTS MAY BE IN ERROR AND # # COMMANDS MAY LEAD TO DISASTROUS # # RESULTS. # # # ######################################### #### PLEASE SEE: #### ######################################### # # # IN THE INSTALLATION GUIDE MANUAL: # # APPENDIX A - ADMINISTRATOR EXTRACT: # # RESULTS OF MARKING A PARTIAL EXTRACT # # AS FULL # # # ######################################### #### W A R N I N G #### #########################################

Explanation The extract VSAM file is not marked as FULLRUN or USER FULLRUN. Program VRADOMK will terminate with a return code 12 and scoping information will not be placed into the Extract VSAM files. User Action Correct by rerunning Extract.

VRA0092E UPDATING USER ID USERID Explanation An error occurred attempting to read the 200 record for User ID Userid. User Action See message VRA0096E for error codes.



VRA0093E READING CONNECT RECORDS FOR USER ID USERID Explanation An error occurred attempting to read the 900 record for User ID Userid. User Action See message VRA0096E for error codes.

VRA0094E VSAM FILE NOT A FULLRUN User Action Correct by rerunning Extract.

VRA0095E READING GROUP RECORD FOR GROUP1, SUBGROUP OF GROUP2 Explanation An error occurred attempting to read the 100 records for Group group1. It is a Subgroup of Group group2. Use the RACF LISTGRP command to determine if group1 is a valid Subgroup of group2. User Action See message VRA0096E for error codes.

VRA0096E VSAM ERROR DETECTED RPL FEEDBACK CODE = XXX XXX XXX XXX LOCATION = VSAM XX.

Explanation A VSAM I/O request did not complete successfully. The RPL codes are displayed in message text. These codes are described in the VSAM Administration Macro Instruction Reference. User Action If unable to correct the error, Contact Vanguard Technical Support.

VRA0097E CANNOT FIND GROUP GROUP IN TABLE Explanation A group that appeared as an owner or superior group was not found in the Extract file. User Action This problem most often happens in the first extract. Run the obsolete program, and then rerun extract.

VRA0098E BYPASSED 950 RECORD FOR USER USERID Explanation A group that a user has a connection to could not be found in the VSAM file. Message VRA0097E precedes this message. User Action There is a logical error in the RACF database. List the group from message VRA0097E and list the user from this message. Look at the connect information on the two list commands. Usually issuing a connect command for the user will fix the error. If this does not resolve the problem, Contact Vanguard Technical Support.

VRA0099E DEPTH OF SUBGROUP XXXXXXXX EXCEEDSS VRA RESTRICTION OF 19 Explanation The depth of subgroups exceeds 19. User Action Reorganize groups so as not to exceed 19.



VRA0100E UNSUCCESSFUL SORT, RETURN CODE = RC Explanation The Extract program terminated abnormally during sort processing. Sort return code appears at RC. User Action Contact Vanguard Technical Support

VRA0101E GETMAIN ERROR ON: (ONE OF FOLLOWING) 1) INDEX-BLOCK-TABLE RC =RETURN-CODE 2) COMMON-TABLE RC= RETURN-CODE 3) WORK-TABLE RC= RETURN-CODE 4) BUNDLE-TABLE RC= RETURN-CODE 5) WS-CATEGORY-DATA RC= RETURN-CODE 6) TAPEVOL-DATA RC= RETURN-CODE 7) VOLSER-DATA RC= RETURN-CODE 8) RACFVARS-TABLE RC = RETURN-CODE 9) RACF-INDEX-TABLE RC= RETURN-CODE 10) GROUP-DATA RC= RETURN-CODE 11) USERID-DATA RC= RETURN-CODE 12) DELGRP-DATA RC= RETURN-CODE 13) CONNECT-DATA RC= RETURN-CODE 14) EXCLUDE-DATA RC= RETURN-CODE

Explanation An internal error occurred as indicated in the message text. User Action Contact Vanguard Technical Support.

VRA0102E PROCESS ERROR IN ABOVE PROFILE, DIAGNOSTIC INFORMATION IS IN DDNAME (VRAOUT)

Explanation Extract had an error processing the profile named in message VRA0162I. User Action Contact Vanguard Technical Support

VRA0103I RACF IS ACTIVE, UNDEFINED CLASS CLASS Explanation RACF is active, however, a class name was found in a profile, which is not defined in the class descriptor table, where CLASS is the name of the undefined class. The condition is possible if the ICHRRCDE table is incorrectly coded. User Action Contact your system administrator.

VRA0104I GROUP GROUP - HAS NO SUPERIOR GROUP Explanation There is an error on the RACF database or the installation has modified RACF to have a group other than SYS1 as the highest group. If more than one of these messages appear, it is due to errors on the RACF database. User Action Correct and rerun.



VRA0105I DATA SET PROFILES CONTAINING LOWER CASE PROFILES HAVE BEEN FOUND

Explanation Data set profiles with lower case characters in their name exist on the RACF database. These profiles cannot be administered with the RACF commands and are usually created by other products. These profiles are extracted to the Type 399 VSAM record. Extract will complete with a return code of 4. User Action Correct and rerun.

VRA0106E INSUFFICIENT VIRTUAL STORAGE FOR VSAM LSR POOL DATA BUFFERS. Explanation Administrator was unable to perform a VSAM LSR pool build using the MVS VSAM BLDVRP service. User Action Increase the region size of the job and restart the job. If the problem persists, Contact Vanguard Technical Support.

VRA0107E NAME-TOKEN CALL SERVICE FAILED FOR LSR POOL TYPE RC=CCCC. Explanation Administrator was unable to perform VSAM LSR pool BUILD or DELETE (TYPE) processing because of an error using the Administrator's MVS Name/Token service interface. User Action Return codes from 0 through 100 are MVS Name/Token Service return codes. To determine the nature of the error, examine the return code's explanation in the "MVS Programming: Authorized Assembler Services Reference" manual in topic Return Codes for the MVS Name/Token Service that failed. If CALL is CREATE, examine the return codes for the IEANTCR service. If CALL is DELETE, examine the return codes for the IEANTDL service. If CALL is RETRIEVE, examine the return codes for the IEANTRT service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support. Return codes over 100 are for Administrator detected errors. If you receive a return code over 100, Contact Vanguard Technical Support.

VRA0108E FACILITY CLASS NOT ACTIVE Explanation The RACF FACILITY class is not active and the user's authority to execute this program cannot be verified. User Action Activate the RACF FACILITY class and rerun the program.

VRA0116E CATEGORY LIMIT OF 5,000 EXCEEDED Explanation More than 5,000 categories are defined on the RACF database. User Action Contact Vanguard Technical Support .



VRA0119E CUSTOMER NUMBER MISSING OR INVALID. PLEASE VERIFY CUSTNO IN VIPOPTS(VRAOPT00)

Explanation The customer number parameter in the VIPOPTS data set is missing or invalid. User Action Correct the customer number parameter and retry.

VRA0120E INVALID RACF DATABASE TYPE Explanation RACF database IO program has returned an invalid database type code. User Action Verify input data set is a RACF database and rerun.

VRA0121E NO PRIMARY RACF DATABASE Explanation RACF database IO program could not locate the primary RACF database. User Action Contact Vanguard Technical Support.

VRA0122E UNABLE TO ALLOCATE RACF DATABASES Explanation RACF database IO program could not allocate the RACF database(s). User Action Contact Vanguard Technical Support.

VRA0123E SEVERE OPEN ERROR ON RACF DATABASE Explanation RACF database IO program encountered an error while opening the RACF database. User Action Contact Vanguard Technical Support.

VRA0124E RACF DATABASE ALREADY OPENED Explanation RACF database IO program attempted to open RACF database that is already opened. User Action Contact Vanguard Technical Support.

VRA0125E ERROR READING AN UNOPENED DATABASE Explanation RACF database IO program attempted to read an unopened RACF database. User Action Contact Vanguard Technical Support.



VRA0126E INVALID INDEX TABLE FLAG Explanation RACF index processor program passed an invalid table flag to EXTRACT. User Action Contact Vanguard Technical Support.

VRA0130E INVALID RACF DATABASE LEVEL 01 INDEX BLOCK DSSEQ = XXXX BLOCK = YYYY DISPL = ZZZZ

Explanation A RACF database block did not point to a level 01 index block. Block = yyyy is the actual record in the xxxx database in error. User Action Verify that database xxxx (sequence number of allocated database) is a complete file and rerun.

VRA0131E INVALID RACF DATABASE INDEX SEGMENT ENTRY DSSEQ = XXXX BLOCK = YYYY DISPL = ZZZZ

Explanation When processing segment entries in a level 01 index block an invalid character was encountered in allocated database xxxx at block yyyy and at displacement zzzz. User Action Contact Vanguard Technical Support.

VRA0132E INVALID RACF DATABASE INDEX SEGMENT RBA ENTRY DSSEQ = XXXX BLOCK = YYYY DISPL = ZZZZ

Explanation When processing segment entries in a level 01 index block the RBA address was not found in allocated database xxxx at block yyyy and at displacement zzzz. User Action Contact Vanguard Technical Support.

VRA0133W SMALL VSAM ERROR - DUPLICATE KEY Explanation While loading sorted records into the small VSAM file at least two records had identical keys. User Action Review the Extract Audit Report for a complete list.

VRA0134E SMALL VSAM ERROR - FILE FULL Explanation The small VSAM file ran out of space while records were being added. Enlarge the VSAM file and rerun. User Action Enlarge the VSAM file and rerun.



VRA0135E SMALL VSAM ERROR - I/O ERROR Explanation A severe error occurred while loading records into the small VSAM file. User Action Contact Vanguard Technical Support.

VRA0136W MEDIUM VSAM ERROR - DUPLICATE KEY Explanation While loading sorted records into the medium VSAM file at least two records had identical keys. User Action Review the Extract Audit Report for a complete list.

VRA0137E MEDIUM VSAM ERROR - FILE FULL Explanation The medium VSAM file ran out of space while records were being added. User Action Enlarge the VSAM file and rerun..

VRA0138E MEDIUM VSAM ERROR - I/O ERROR Explanation A Severe error occurred while loading records into the medium VSAM file. User Action Contact Vanguard Technical Support.

VRA0139E SMALL VSAM ERROR - I/O ERROR DURING RANDOM READ Explanation A severe error occurred while performing a random read on the small VSAM file. User Action Contact Vanguard Technical Support.

VRA0140E SMALL VSAM ERROR - I/O ERROR DURING RE-WRITE Explanation A severe error occurred while re-writing a record on the small VSAM file. User Action Contact Vanguard Technical Support.

VRA0143E RACFVARS TABLE LIMIT OF 10,000 EXCEEDED Explanation More than 10,000 RACFVARS profiles have been found on the RACF database. The internal table limit has been exceeded. Some exception analysis has been bypassed. User Action Contact Vanguard Technical Support.



VRA0146I PROFILES EXIST FOR THE FOLLOWING INACTIVE CLASSES Explanation Profile(s) were found for the inactive classes listed. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0147I THERE ARE NO PROFILES FOR THE FOLLOWING ACTIVE CLASSES Explanation The active classes listed have no profiles defined to them. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0148E SMALL VSAM OPEN UPDATE I/O ERROR Explanation A severe error occurred when opening the small VSAM file for update processing. User Action Contact Vanguard Technical Support.

VRA0149E SMALL VSAM START I/O ERROR Explanation A severe error occurred when performing a start browse small VSAM function. User Action Contact Vanguard Technical Support.

VRA0150E SMALL VSAM READ NEXT I/O ERROR Explanation A severe error occurred when performing a read next small VSAM function. User Action Contact Vanguard Technical Support.

VRA0151E SMALL VSAM REWRITE I/O ERROR Explanation A severe error occurred when re-writing a small VSAM record. User Action Contact Vanguard Technical Support.

VRA0152E EXCLUDE AND SELECT CONTROL CARDS CANNOT BE COMBINED, JOB ENDS UNSUCCESSFULLY

Explanation When running an extract, control cards of EXCLUDE= and SELECT= were included within the same input. User Action Correct the error and rerun.

VRA0153E EXCLUDE OR SELECT CLASS NOT FOUND IN CLASS DESCRIPTOR TABLE. CLASS = CLASS

Explanation When running an extract, a control card of EXCLUDE= or SELECT=



contained a class name that is not found in the Class Descriptor table. User Action Correct the error and rerun.

VRA0154E SORT FIELD LENGTH IS OUT OF RANGE, REC TYPE=nnn Explanation An error occurred in the sort process of the extract process. User Action Contact Vanguard Technical Support.

VRA0160W USER user HAS AN INVALID SECLEVEL Explanation User Profile(s) have been found that is using a Nonexistent SECLEVEL Resource. Processing continues. User Action Review the Extract Audit Report for a complete list

VRA0161W USER user HAS AN INVALID CATEGORY Explanation User Profile(s) have been found that is using a Nonexistent CATEGORY Resource. Processing continues. User Action Review the Extract Audit Report for a complete list

VRA0162I CLASS=class,ENTITY=resource name Explanation Continuation of message VRA0102E. User Action Review report, correct error, and rerun.

VRA0163W CLASS class HAS AN INVALID SECLEVEL IN ENTITY resource name Explanation Resource Profile(s) have been found that is using a nonexistent SECLEVEL Resource. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0164W CLASS class HAS AN INVALID CATEGORY IN ENTITY resource name Explanation Resource Profile(s) have been found that is using a nonexistent CATEGORY Resource. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0165I USER IS PENDING REVOKE BY INACTIVE DATE Explanation This message informs that there is a user that will be revoked soon. Processing continues. User Action Review the Extract Audit Report for a complete list.



VRA0166I EXTRACT MARKED nnnnn USERS PENDING REVOKED IN THE VRA EXTRACT FILE DUE TO INACTIVITY

Explanation Informational message to give the number of users pending revoke. This is an end of processing message. User Action Review the Extract Audit Report for a complete list.

VRA0167I PROFILES BYPASSED nnn,nnn,nnn Explanation Informational message to give the number of profiles that were bypassed in the extract process. This is an end of processing message. User Action Review the Extract Audit Report for a complete list.

VRA0168W GENERIC CHARACTERS FOUND IN A NON-GENERIC PROFILE CLASS = class,ENTITY = resource name

Explanation Generic characters were found in a profile name that isn’t generic. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0169W SINGLE QUOTES AROUND PROFILE NAME: CLASS = class,ENTITY = resource name

Explanation Single quote marks were found to incase the profile name. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0170W PROFILE ENDING IN %* CLASS = class,ENTITY = resource name Explanation Profile name is terminated with the characters %*. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0171W PROFILE CONTAINS INVALID RACFVARS CLASS = CLASS,ENTITY = RESOURCE NAME

Explanation Profile name contains invalid RACFVARS. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0172W PROFILE CONTAINS AN UNSIGNED DATE: (ONE OF FOLLOWING) 1) GROUP = GROUP 2) USERID = USER 3) DATASET = DATASET 4) CLASS= CLASS ENTITY = RESOURCE NAME

Explanation Profile has an unsigned date in one of the date fields. Processing continues.



User Action Review the Extract Audit Report for a complete list.

VRA0173W PROFILE CONTAINS AN INVALID DATE: (ONE OF FOLLOWING) 1) GROUP = GROUP 2) USERID = USER 3) DATASET = DATASET 4) CLASS= CLASS ENTITY = RESOURCE NAME

Explanation Profile has an invalid date in one of the date fields. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0174E BYPASSED 950 RECORD FOR USER XXXXXXXX. CONNECT RECORDS MISSING.

Explanation A group connect record for this user could not be found in the VSAM file. Message VRA0093E precedes this message. User Action There is a logical error in the RACF database. List the user as displayed in this message and review the connect information. To correct the problem, a delete and rebuild of the user should be performed.

VRA0174W CLASS DOES NOT EXIST IN CLASS DESCRIPTOR TABLE. CLASS= CLASS' ENTITY = 'PROFILE NAME'

Explanation The class name specified is not defined in the RACF Class Descriptor Table. Processing continues. User Action Review the Extract Audit Report for a complete list.

VRA0175E BYPASSED 950 RECORD FOR ENTITY XXXXXXXX. A DUPLICATE RECORD EXISTS.

Explanation More than one user/group/subgroup record exists for this entity in the VSAM file. Message VRA0089E precedes this message. User Action There may be a logical error in the RACF database. List the entity from this message and review the information. Contact Vanguard Technical Support if you require additional information.

VRA0201I REMOVE ID FROM ALL ACCESS LIST Explanation A REMOVE command was submitted to remove a User ID or group name (ID) from the Standard and Conditional Access Lists of all data set and general resource profiles. This message indicates the REMOVE command passed all syntax checking rules and will be processed. User Action None.



VRA0202I REPLACE NOTIFYS FOR USERID1 WITH USERID2 Explanation A REPLACE command was submitted to replace all notify messages for User ID (Userid1) with a replacement User ID or the keyword NONOTIFY (Userid2). This message indicates the REPLACE command passed all syntax checking rules and will be processed. User Action None.

VRA0203I REPLACE OWNERSHIP OF OWNERID1 WITH OWNERID2 Explanation An OWNER command was submitted to replace the owner (ownerid1) of all User, Group, Data set and General Resource Profiles with a replacement User ID or group name (ownerid2). This message indicates the OWNER command passed all syntax checking rules and will be processed. User Action None.

VRA0204I REPLACE ALL OCCURRENCES OF ID1 WITH ID2 Explanation A REPLACE command was submitted to replace all notify messages for User ID (Userid1) with a replacement User ID or the keyword NONOTIFY (Userid2). This message indicates the REPLACE command passed all syntax checking rules and will be processed. User Action None.

VRA0205E FIRST USER ID NOT FOUND IN RACF DATABASE Explanation The first User ID on an input command does not exist on the RACF database. The input command was not processed. User Action Correct and rerun.

VRA0206E SECOND USER ID NOT FOUND IN RACF DATABASE Explanation The second User ID on an input command does not exist on the RACF database. The input command was not processed. User Action Correct and rerun.

VRA0207E SECOND PARAMETER NOT FOUND IN RACF DATABASE Explanation The second User ID or group on an input command does not exist on the RACF database. The input command was not processed. User Action Correct and rerun.



VRA0209E SECOND USER ID/GROUP NOT FOUND IN RACF DATABASE Explanation The second User ID or group on an input command does not exist on the RACF database. The input command was not processed. User Action Correct and retry.

VRA0215I CLONE USERID USERID TO USERID USERID Explanation A command was submitted to clone an existing User ID (Userid1) to a new User ID (Userid2). This message indicates the CLONEU command passed all syntax checking rules and will be processed. User Action None.

VRA0220E SCOPING: USER ID NOT FOUND IN EXTRACTED FILES - ACCESS DENIED Explanation The User ID of the person executing this command was not found in the Administrator Extract files. This would occur if the Administrator Extract has not been run since the User ID was added to RACF. User Action Rerun the Administrator Extract function and submit the command again.

VRA0221E FAILURE WHEN ATTEMPTING TO RETRIEVE ACEE USERID, CALL VANGUARD Explanation When a task-oriented command is executed, the User ID is obtained from the user's ACEE. An unexpected error occurred during this process. User Action Contact Vanguard Technical Support.

VRA0222E SCOPING: EXTRACT FILES CONTAIN NO STATUS RECORD - ACCESS DENIED Explanation No Administrator Extract file status records (record type 000) were found in the small VSAM file. These records are created during the Administrator Extract process. User Action Re-run the Administrator Extract and try the command again. If it fails again, Contact Vanguard Technical Support.

VRA0223E SCOPING: SEVERE VSAM I/O ERROR Explanation An unexpected error occurred while processing the VSAM Extract files. User Action Re-run the Administrator Extract process again and ensure that it completes successfully. When Extract completes successfully, retry the command again.



VRA0224E SCOPING: COMPARE TABLE FULL - THIS USER HAS TOO MANY 950 RECORDS

Explanation The capacity of an internal table has been exceeded. User Action Contact Vanguard Technical Support.

VRA0225E SCOPING: GENERAL FAILURE Explanation An internal error occurred during scoping processing. User Action Contact Vanguard Technical Support.

VRA0226E YOU ARE NOT AUTHORIZED TO ACCESS THIS GROUP Explanation You do not have scope authority over this group when attempting a clone or delete operation. User Action Contact your system administrator.

VRA0227E YOU ARE NOT AUTHORIZED TO RUN OBSOLETE. Explanation You must have one of the following: SYSTEM SPECIAL SYSTEM AUDITOR Read access to VRA$.SCOPE FACILITY class profile. User Action Contact your system administrator.

VRA0228E YOU ARE NOT AUTHORIZED TO ACCESS THIS RESOURCE Explanation You do not have scope authority over this resource when attempting a clone operation. User Action Contact your system administrator.

VRA0229E YOU ARE NOT AUTHORIZED TO ACCESS THIS DATASET Explanation You do not have scope authority over the entity when attempting a clone operation from. User Action Contact your system administrator.

VRA0230I TRANSFER USERID XXXXXXX TO USERID YYYYYYY Explanation The transfer command has been invoked for the named User IDs. User Action None.



VRA0231E SECOND USERID EXISTS IN RACF DATABASE Explanation The second User ID on the CLONEU command currently exists User ID on the RACF database. The CLONEU command was rejected. User Action Correct and rerun.

VRA0232E YOU ARE NOT AUTHORIZED TO ACCESS THIS USERID Explanation You do not have scope authority over the entity when attempting a clone, delete, or transfer operation. User Action Contact your system administrator.

VRA0233E SYNTAX ERROR ON INPUT COMMAND Explanation Refer to previous error messages for details. User Action Correct the error and retry.

VRA0234E NEW DATASET VOLUME CANNOT BE GIVEN WITH GENERIC Explanation The Data Set profile name was specified as Generic, but a volume serial was also specified. User Action Correct and retry.

VRA0240I DELETE DSN FROM THE RACF DATABASE Explanation A DELETED command was submitted to delete data set (DSN) from the RACF database. This message indicated the DELETED command passed all syntax checking rules and will be processed. User Action None.

VRA0241E DATA SET NOT FOUND DSN Explanation A DELETED command was submitted to delete profile (DSN) and was not found. Command rejected. User Action Correct and retry.

VRA0242I DELETE ENTITY CL= CLASS FROM THE RACF DATABASE Explanation A DELETER command was submitted to delete general resource profile (entity CL=class) from the RACF database. This message indicated the DELETER command passed all syntax rules and will be processed. User Action None.



VRA0243E RESOURCE NOT FOUND - ENTITY CL=CLASS Explanation A DELETER command was submitted to delete a general resource profile (entity CL=class) from the RACF database that was not found. Command rejected. User Action Correct and retry.

VRA0244E GROUP GROUP NOT FOUND IN RACF DATABASE Explanation A DELETEG command was submitted to delete a group (group) from the RACF database and was not found. Command rejected User Action Correct and retry.

VRA0245E OWNER ID NOT FOUND IN RACF DATABASE Explanation A DELETEG command was submitted to delete a group from the RACF database and the OWNER parameter (ID) was not found to be a group or User ID. Command rejected. User Action Correct and retry.

VRA0246I DELETE GROUP GROUP FROM RACF DATABASE Explanation A DELETEG command was submitted to delete a group (group) from the RACF database. This message indicates DELETEG command passed all syntax rules and will be processed. User Action None.

VRA0247E CANNOT DELETE GROUP GROUP - DATA SET PROFILE EXIST Explanation A DELETEG command was submitted to delete a group (group) from the RACF database but a data set profile was found having the group as the high-level qualifier. Command rejected. User Action All data set profile with the group as a high level qualifier must be deleted before the group can be deleted.

VRA0248E CANNOT DELETE GROUP GROUP - IS A DFP RESOWNER Explanation A DELETEG command was submitted to delete group (group) from the RACF database but a DFP segment was found having the group as the RESOWNER. Command rejected. User Action All data set profiles with the group as a resowner must be modified before the group can be deleted.



VRA0249I USER USERID WITH GROUP AUTHORITY OF AUTHORITY REMOVED FROM GROUP

Explanation A DELETEG command was submitted to delete a group. In the process a User ID (Userid) was found to have had group connect authority (authority) of either JOIN, CONNECT, or CREATE. This authority will not be replicated. The security analyst must perform granting this authority. Processing continues. User Action Manually grant this authority if it is required.

VRA0250E MULTIPLE DISCRETE DATA SETS EXIST, CANNOT DELETE Explanation A DELETED command was submitted to delete profile and the VOL= was not specified. A generic data set was not found and multiple discrete data sets were found. Command rejected. User Action Add the VOL= operand and retry.

VRA0251I DELETE USER USERID FROM THE RACF DATABASE Explanation A DELETEU command was submitted to delete user (Userid) from the RACF database. This message indicates the DELETEU command passed all syntax rules and will be processed. User Action None.

VRA0252E CANNOT DELETE USER USERID - IS A DFP RESOWNER Explanation A DELETEU command was submitted to delete user (Userid) from the RACF database but a DFP segment was found with the user as the RESOWNER. Command rejected. User Action All data set profiles with the user as a resowner must be modified before the user can be deleted.

VRA0253I OBSOLETE REQUEST Explanation An OBSOLETE command was submitted to remove references to obsolete users or groups. This message indicates the OBSOLETE command passed all syntax rules and will be processed. User Action None.



VRA0254I CLONE DATA SET DSN1 TO DSN2 Explanation A command was submitted to clone an existing data set (dsn1) to a new data set (dsn2). This message indicates the CLONED command passed all syntax rules and will be processed. User Action None.

VRA0255E CLONED CARD MISSING Explanation A CLONED command was submitted which requires an input card. No card was found. Command rejected. User Action Correct and retry.

VRA0256E SECOND CLONED DATA SET IS SAME AS FIRST CLONED DATA SET Explanation A CLONED command was submitted and the FROM and TO data set names are identical. Command rejected. User Action Correct and retry.

VRA0257E FROM CLONED DATA SET DOES NOT EXIST Explanation A CLONED command was submitted and the FROM data set (DSN) does not exist. Command rejected. User Action Correct and retry.

VRA0258E MULTIPLE DISCRETE DATA SETS EXIST, CANNOT CLONE Explanation A command was submitted to clone an existing data set and the VOL= parameter was not specified. A generic data set was not found and multiple discrete data sets were found. Command rejected. User Action Add the VOL = operand and retry.

VRA0259I CLONE RESOURCE RES1 TO RES2 Explanation A command was submitted to clone an existing general resource (RES1) to a new general resource (RES2). This message indicated the CLONER command passed all syntax checking rules and will be processed. User Action None.



VRA0260E TO CLONER GENERAL RESOURCE ALREADY EXISTS Explanation A CLONER command was submitted and the TO general resource (CLASS=class ENTITY=entity) already exists. Command rejected. User Action Correct and retry.

VRA0261E SECOND CLONER CARD MISSING Explanation A CLONER command was submitted which requires three input cards and the second CLONER card was not found. Command rejected. User Action Correct and retry.

VRA0262E THIRD CLONER CARD MISSING Explanation A CLONER command was submitted which requires three input cards and the third CLONER card was not found. Command rejected. User Action Correct and retry.

VRA0263E SECOND CLONER RESOURCE IS THE SAME AS FIRST Explanation A CLONER command was submitted and the FROM and TO general resource names and classes are identical. Command rejected. User Action Correct and retry.

VRA0264E FROM CLONER GENERAL RESOURCE DOES NOT EXIST Explanation A CLONER command was submitted and the FROM general resource (CLASS=class ENTITY=entity) does not exist. Command rejected. User Action Correct and retry.

VRA0265E SECOND CLONEU CARD MISSING Explanation A CLONEU command was submitted which requires two input cards and the second CLONEU card was not found. Command rejected. User Action Correct and retry.



VRA0266E FIRST GROUP ALREADY EXISTS IN RACF DATABASE Explanation A CLONEG command was submitted and the TO group already exists. Command rejected. User Action Correct and retry.

VRA0267E SECOND GROUP DOES NOT EXIST IN RACF DATABASE Explanation A CLONEG command was submitted and the FROM group does not exists. Command rejected. User Action Correct and retry.

VRA0268E OWNER ID DOES NOT EXIST IN RACF DATABASE Explanation A CLONEG or TRANSFER command was submitted and the OWNER= parameter was specified but the parameter could not be found as a user or group name on the RACF database. Command rejected. User Action Correct and retry.

VRA0269I CLONE GROUP GROUP1 TO GROUP GROUP2 Explanation A command was submitted to clone an existing group (group1) to a new group (group2). This message indicates the CLONEG command passed all syntax checking rules and will be processed. User Action None.

VRA0270E CANNOT CLONE GROUP GROUP - DATA SET PROFILE EXISTS Explanation A CLONEG command was submitted to clone a group but a data set profile was found having the group as the high-level qualifier. Command rejected. User Action Correct and retry.

VRA0271E OWNER OF GROUP CANNOT CHANGE BECAUSE IT DOES NOT EQUAL GROUP'S SUPERIOR GROUP.

Explanation A CLONEG command was submitted to rename a group, but the new owner was a group, but not the superior group. Command rejected. User Action If a group is to own a group, it must be the superior group. Correct and retry.



VRA0272E NODE.USERID PAIRS EXCEEDED COUNT OF 12 Explanation Passed more than 12 ‘Node.Userid’ pairs in the creation of the AT/ONLYAT commands. Command rejected. User Action Correct and retry.

VRA0273E NODE.USERID PAIR SYNTAX ERROR = NODE.USERID Explanation An error occurred when process this node.userid for this process. User Action Contact Vanguard Technical Support.

VRA0278E NOTIFY ID DOES NOT EXIST OR IS NOT AN USER ID Explanation The notify field must be a valid User ID. Command rejected. User Action Correct and retry.

VRA0290I USER SPECIFIED COMMANDS Explanation User supplied commands are listed for review. User Action None.

VRA0299E MEMLIST SPECIFIED BUT CLASSES ARE NOT EQUAL Explanation A CLONER command was submitted to clone a general resource profile and the MEMLIST was specified but the TO class was different than the FROM class. Classes must be the same when specifying MEMLIST. Command rejected. User Action Correct and retry.

VRA0300E NEW GENERAL RESOURCES NAME IS MISSING. Explanation The new General Resource profile name was not specified for the CLONER command. User Action Correct and retry.

VRA0301E CLASS (CL=) KEYWORD IS MISSING. Explanation The CL= keyword is missing on the CLONER or DELETER command card being processed. User Action Correct and retry.



VRA0302E CLASS NAME IS MISSING. Explanation There was no General Resource Class specified in the CLONER or DELETER command. User Action Correct and retry.

VRA0303E MISSING GENERAL RESOURCE NAME. Explanation The General Resource profile name was not specified for the DELETER command. User Action Correct and retry.

VRA0304E MISSING OLD USER ID. Explanation There is no ‘old’ User profile name specified in the DELETEU or NOTIFY command. User Action Correct and retry.

VRA0305E MISSING NAME OF THE GROUP TO BE CREATED. Explanation There is no new Group profile name specified in the CLONEG command. User Action Correct and retry.

VRA0306E MISSING NAME OF THE GROUP MODELED FROM. Explanation There is no Group profile name specified in the CLONEG command, for the command to clone from. User Action Correct and retry.

VRA0307E MISSING REQUIRED PARAMETER-CONNECT, ACCESS. Explanation The keyword specified for the Connect and/or Access process in the CLONEG command is incorrect. User Action Correct and retry.

VRA0308E KEYWORD IS NOT OWNER. Explanation Missing keyword OWNER for the CLONER command is incorrect. User Action Correct and retry.



VRA0309E MISSING REQUIRED SYSIN CARD(S). Explanation This command has no input control card(s). This will appear when there is no control card input, or when there is no command found. User Action Correct and retry.

VRA0310E NEW USER PROFILE NAME IS MISSING. Explanation There is no new User profile name specified in the CLONEU command. User Action Correct and retry.

VRA0311E MISSING NAME OF THE USER MODELED FROM. Explanation There is no user profile name specified in the CLONEU command, for the command to clone from. User Action Correct and retry.

VRA0312E MISSING REQUIRED DATASET NAME. Explanation The Data Set profile name was not specified for the DELETED command. User Action Correct and retry.

VRA0313E VOLUME IS INVALID. Explanation The Volume Serial for the DELETED command is invalid in format. User Action Correct and retry.

VRA0314E MISSING NAME OF TO BE DELETED GROUP. Explanation The Group profile name was not specified for the DELETEG command. User Action Correct and retry.

VRA0315E MISSING NEW DEFAULT GROUP NAME. Explanation The DEFAULT= parameter exists, but the Default Group name was not specified for the DELETEG command. User Action Correct and retry.

VRA0316E MISSING NEW OWNER NAME. Explanation The OWNER= parameter exist, but the Owner name was not specified for the DELETEG command. User Action Correct and retry.



VRA0317E MISSING NEW USER ID. Explanation There is no new User profile name specified in the NOTIFY command. User Action Correct and retry.

VRA0318E 'TAPEVOL RESOURCE CLASS IS INVALID FOR THIS FUNCTION.' Explanation A Clone Request was attempted for a TAPEVOL resource entity, ‘primary’ or ‘secondary’. This is no longer allowed. User Action The same results can be achieved by running an on-line Rebuild command for the model TAPEVOL entity, modifying the entity name(s) prior to execution.

VRA0319E BOTH AUTOGID AND SHARED SPECIFIED - CHECK SETTINGS IN VRAOPT00 Explanation You specified the SHARED keyword and your default for SETAUTOGID is YES in VRAOPT00. The SHARED and SETAUTOGID options are mutually exclusive. User Action Either remove the SHARED keyword or change your default for SETAUTOGID to NO in VRAOPT00.

VRA0320E BOTH AUTOUID AND SHARED SPECIFIED - CHECK SETTINGS IN VRAOPT00 Explanation You specified the SHARED keyword and your default for SETAUTOGID is YES in VRAOPT00. The SHARED and SETAUTOGID options are mutually exclusive. User Action Either remove the SHARED keyword or change your default for SETAUTOGID to NO in VRAOPT00.

VRA0321E BPX.NEXT.USER DOES NOT EXIST Explanation A general resource facility profile called BPX.NEXT.USER must exist before you can use the AUTOUID or AUTOGID options. User Action Contact either your System or Security Administrator and request them to define a RACF profile called BPX.NEXT.USER with the proper characteristics. Instructions for setting up this profile is in the Vanguard Administrator Technical Reference Guide.

VRA0420E LIVEALLOC: PARAMETERS MISSING Explanation Parameter of LIVEALLOC( ) in VRAOPT00 member in VIPOPTS is missing. User Action Insure that this parameter is within the VRAOPT00 member is there and correct, then rerun.



VRA0421E LIVEALLOC: INPUT PARAMETER TOO LONG Explanation Parameter of LIVEALLOC( ) expected length exceed the maximum. User Action Insure that this parameter is within the VRAOPT00 member is correct, being a value of either PRIMARY, BACKUP, USER, or NONE.

VRA0422E LIVEALLOC: INVALID INPUT PARAMETER Explanation Parameter of LIVEALLOC( ) expected data was not correct. User Action Insure that this parameter is within the VRAOPT00 member is correct, being a value of either PRIMARY, BACKUP, USER, or NONE.

VRA0423E DDNAME SUFFIX OUT OF RANGE Explanation In validating the access to the Live RACF database, it was found that one or more DDNAMEs allocated to these data sets, had it is numeric suffix out of the range for the number of data sets. User Action If allocating the RACF databases directly, guarantee that the suffix on the DDNAMEs are consecutively numbered, and the last number doesn’t exceed the total number of data sets. If this is not the case, Contact Vanguard Technical Support.

VRA0424E RACF PRIMARY DATASET MISSING Explanation In validating the access to the Live RACF database, the primary RACF data sets could not be found. User Action Contact your system administrator.

VRA0425E DYNAMIC ALLOCATION ERROR Explanation While attempting the allocation of the requested RACF data sets, an allocation error occurred. User Action Contact Vanguard Technical Support.

VRA0426W THE RACF NAME TABLE (ICHRDSNT) INDICATES MORE ENTRIES THAN THE DATASET PAIRS SPECIFIED

Explanation The RACF dataset name table consists of a count field of the number of RACF dataset pairs and the names of these datasets. The count is greater than the actual number of coded dataset name pairs. User Action Verify with your systems programmer that the ICHRDSNT Module is coded correctly. Note that the count field indicates 1 for each primary/backup pair. Therefore, if you have 1 primary dataset and 1 backup dataset coded, the count must be 1.



VRA0500I VRA LICENSE WILL EXPIRE IN NN DAYS. Explanation Your license to use THE Administrator will expire in nn days. User Action Your Administrator product administrator should contact Vanguard to obtain a new datecode.

VRA0501E INTERNAL LICENSE VERIFICATION ERROR. Explanation An internal program error occurred. User Action Contact Vanguard Technical Support.

VRA0502E VIPOPTS DD STATEMENT MISSING. Explanation THE Administrator was unable to open the VIPOPTS data set, because the VIPOPTS DD statement was missing. User Action Ensure the VIPOPTS DD statement is included in your logon proc or the batch job.

VRA0503E VRAOPT00 MEMBER MISSING IN VIPOPTS DATASET. Explanation THE Administrator could not find the VRAOPT00 member. User Action Ensure the VRAOPT00 member is included in the VIPOPTS data set.

VRA0504E VRAOPT00 MEMBER IS EMPTY IN VIPOPTS DATASET. Explanation There are no records in the VRAOPT00 member in the VIPOPTS data set. User Action Ensure the required records are in the VRAOPT00 member of the VIPOPTS data set.

VRA0505E VRA INTERNAL ERROR IN DATA RETRIEVER. Explanation An internal program error occurred in the data retriever. User Action Contact Vanguard Technical Support.

VRA0506E CUSTNO PARAMETER WAS NOT FOUND IN VRAOPT00 MEMBER. Explanation The required CUSTNO parameter was not found in the VRAOPT00 member. User Action Add the CUSTNO parameter.



VRA0507E DATECODE PARAMETER WAS NOT FOUND IN VRAOPT00 MEMBER. Explanation The required DATECODE parameter was not found in the VRAOPT00 member. User Action Add the DATECODE parameter.

VRA0508E CUSTNO PARAMETER CONTAINS SYNTAX ERROR. Explanation The format of the CUSTNO parameter is invalid. User Action Correct the CUSTNO parameter.

VRA0509E DATECODE PARAMETER CONTAINS SYNTAX ERROR. Explanation The format of the CUSTNO parameter is invalid. User Action Correct the DATECODE parameter.

VRA0510E DATECODE PARAMETER DOES NOT CONTAIN CPUID. Explanation THE Administrator 1.8 and above requires a CPUID sensitive datecode. User Action Contact Vanguard Technical Support to obtain a cpuid sensitive DATECODE.

VRA0511E LIVE RACF OR EXTRACT AUTHORZATION FAILED. Explanation The user does not have at least READ access to the VRA$.LIVE.USER or the VRA$.EXTRACT.USER profiles in the FACILITY class. User Action Grant the user access if appropriate for this user to have access to the Administrator Live RACF or Extract access functions.

VRA0512E VRA0512E EXTRACT FAILED FOR CLASS FACILITY, VRA$.LIVE.USER OR VRA$.EXTRACT.USER.

EXPLANATION The VRA$.LIVE.USER or VRA$.EXTRACT.USER profile in the FACILITY class does not exist. USER ACTION Create the VRA$.LIVE.USER or VRA$.EXTRACT.USER profile in the FACILITY class.



VRA0513E PARSE OF APPLDATA IN FACILITY VRA$.LIVE.USER FAILED.APPLDATA MUST BE FORMATTED "USERID/GROUPID".

Explanation The VRA$.LIVE.USER profile in the FACILITY class does not have the APPLDATA field formatted as documented in the message. User Action Alter the profile to include the APPLDATA field, formatted as userid/groupid where userid is a valid RACF user who has READ access to the RACF database. The / is a /, literally. The groupid is a valid RACF group that the userid is connected to, that will allow read access to the RACF database.

VRA0514E TCBSENV IS ALREADY POPULATED WITH AN ACEE ADDRESS. Explanation You are running an application that has already created a proxy user ID environment. Administrator cannot create a proxy environment upon a proxy environment. User Action Contact Vanguard. This is not an expected condition.

VRA0515E SET TO PROXY USER FAILED. Explanation The SVC was unable to assume the identify of the userid and groupid specified in the APPLDATA field of the FACILITY class profile VRA$.LIVE.USER. User Action Insure both the userid and groupid specified in the APPLDATA field of the VRA$.LIVE.USER profile are valid RACF userid and groupid, and the user is connected to that group. Insure the user is not in REVOKED status, and the connection to the specified groupid is also not in REVOKED status.

VRA0516E RESET OF PROXY USER FAILED. Explanation RACROUTE REQUEST=VERIFY,ENVIRON=DELETE failed. User Action Contact Vanguard.

VRA0520E LOADLIB FILE DID NOT OPEN. Explanation The RACF live SVC loader program could not open the LOADLIB DD statement. User Action Insure the Administrator authorized load library is specified on the LOADLIB DD statement.



VRA0521E LOADLIB IS NOT AUTHORIZED. Explanation The RACF live SVC loader program found the Administrator load library specified on the LOADLIB DD statement is not APF authorized. User Action Take the steps necessary to authorize the load library. If you need additional assistance, call Vanguard Technical Support.

VRA0523E SPECIFIED MODULE IS NOT APF AUTHORIZED. Explanation The live SVC Module (VAMAOSVC) is not marked as APF authorized. The SVC loader program did not load the SVC. User Action Take the steps necessary to authorize the load Module. If you need additional assistance, call Vanguard Technical Support.

VRA0524E ERROR DURING LOAD TO CSA, STORAGE FREED. Explanation The RACF live SVC loader program encountered an error issuing the operating system LOAD macro. The live SVC is not enabled. User Action Call Vanguard. The CSA storage requirements for the live RACF SVC is about 2k bytes.

VRA0525I SVCUPDTE MACRO FAILED RC=XXX, STORAGE FREED. Explanation The live RACF SVC loader program encountered a non-zero return code from the SVCUPDTE macro. User Action Call Vanguard Technical Support.

VRA0526I ADMINISTRATOR LIVE SVC SUCCESSFULLY INSTALLED. Explanation The live RACF SVC loader program worked. User Action None.

VRA0527E ADMINISTRATOR LIVE SVC NOT INSTALLED, EXITING. Explanation Due to previous error, the live RACF SVC loader program did not enable the live SVC. User Action Refer to previous error messages as to the specific reason.



VRA0528I SVC NNN LOADED AT ADDRESS XXXXXXXX, LENGTH YYYYYYYY. Explanation The live RACF SVC was successfully installed. The SVC number used is nnn, it is loaded at storage address xxxxxxxx, and the Module length is (hex) yyyyyyyy. User Action None.

VRA0529E INVALID LOADLIB DATA SET. Explanation The RACF live SVC loader program found the data set specified on the LOADLIB DD statement was not an Administrator load library. User Action Insure the data set pointed to by the LOADLIB DD statement is the Vanguard Administrator load library.

VRA0530I THE LIVESVC PARAMETER WAS NOT FOUND IN THE VRAOPT00 MEMBER OF THE VIPOPTS DDNAME.

Explanation The LIVESVC(...) parameter was not found in partitioned data set containing the VRAOPT00 member, or the VRAOPT00 member is missing from the data set indicated by the VIPOPTS DD statement. User Action Specify the LIVESVC(nnn) parameter in the VRAOPT00 member of the data set indicated in the VIPOPTS DD statement.

VRA0531I THE LIVESVC PARAMETER IN VRAOPT00 MEMBER OF VIPOPTS IS INVALID Explanation The RACF live SVC loader program found the LIVESVC(nnn) parameter to be invalid. User Action The value for nnn in the LIVESVC(nnn) parameter must be numeric, and must be 200-255, inclusive.

VRA0551E INVALID "LIVESVC" OPTION Explanation Parameter of LIVESVC in VRAOPT00 member in VIPOPTS data was not correct. Message VRA0552E accompanies this message. This is followed with a U1800 or U1801 abend. User Action Insure that this parameter is within the VRAOPT00 member is correct and exist. This value needs to be between 200 and 255, numeric, a length of 3, and the SVC number assigned by your system administrator.



VRA0552E LIVE RACF OPEN FAILED Explanation Parameter of LIVESVC in VRAOPT00 member in VIPOPTS data was not correct. Message VRA0551E accompanies this message. This is followed with a U1800 or U1801 abend. User Action Insure that this parameter is within the VRAOPT00 member is correct and exist. This value needs to be between 200 and 255, numeric, a length of 3, and the SVC number assigned by your system administrator.

VRA0599E CALL TO LIVE RACF USING PROGRAM PROGRAM, WITH FUNCTION X, AND CONTROL C IS INVALID PROCESS TERMINATED WITH ERRORS, CONTACT V.I.P.

Explanation An attempt was made to access the Live RACF data sets, with the wrong program. This is followed with a U2048 abend. User Action Contact Vanguard Technical Support.

VRA0806E PROGRAM VRASR260 HAD WRONG SEGMENT TYPE SENT. SEGMENT TYPE IS: XXXX.

Explanation Administrator could not complete processing due to a problem with a segment type. User Action Make note of any detail information as in the segment type, segment length, profile type, and profile name. Call Vanguard Technical Support for further instruction.

VRA0820W FIELD XXX AT +NNNNNNNN WITHIN SEGMENT HAS AN INVALID LENGTH. RECORD CREATED MAY HAVE INVALID DATA FOR REPORTING, HOWEVER PROCESSING WILL CONTINUE. SEE FORMATTED DUMP CREATED FROM THE VIPOUT DD.

Explanation A field length in a RACF segment exceeds the segment length. The system produced a formatted dump and sent it to the dataset name found in the VIPOUT DD JCL jobcard. xxx is the field number, as defined in the RACF template. +nnnnnnnn is the offset location in the formatted dump. In the dump, +1 after the offset location is the field length in error. Valid format of a RACF segment is in IBM manual OS/390 Security Server (RACF) Diagnosis Guide. User Action Processing will continue. If the condition persists, contact either your System Administrator or your System Programming staff. If additional assistance is needed, send a copy of the dump to Vanguard Technical Support.



VRA0901E USER IS NOT AUTHORIZED TO EXECUTE PROGRAM Explanation User is not authorized to run this program. Refer to the Controlling Access to Administrator Functions section of the Vanguard Administrator Technical Reference Guide. User Action Contact your security administrator for authorization to this program.

VRA0998E ADMINISTRATOR LOADLIB NOT AUTHORIZED Explanation The Batch Email Report requires that the Administrator LOADLIB be an APF authorized load library. User Action Contact your System Programmer

VRA0999E LICENSE HAS EXPIRED, CONTACT V.I.P. Explanation The expiration date for this license has passed. If preceding messages indicate a problem reading profiles, correct the profiles and rerun. User Action Contact Vanguard Technical Support.

VRA999E UNABLE TO WRITE TO DIAGMSG FILE IN R14DIAG MODULE. FILE STATUS VALUE IS: NN

Explanation When trying to generate the error message on a report during the extract process, there was an error in generating the print line. NN is the COBOL runtime file status that was recorded and displayed. User Action Determine if the error can be corrected by the COBOL file status. These codes are identified in IBM's VS COBOL II Language Reference manual. If unable to correct the problem, Contact Vanguard Technical Support.

VRA1401E VRADOMK PROGRAM HAS NOT BEEN RUN Explanation The VRADOMK program was not run after the Extract step. User Action Re-run the Extract to create a current database, and insure that all steps run correctly.

VRA1402E GROUP ENTERED IN PARM NOT FOUND Explanation The group that was in the input parameter was not found on the database. User Action Correct and rerun.



VRA1403E SUBMITTER USERID NOT FOUND IN VSAM FILE Explanation The userid for the user who submitted this job, was not found in the extract database. User Action Run the Extract to create a current database.

VRA1405E THE SYSIN DD STATEMENT IS MISSING Explanation The SYSIN DD statement for the input control cards can not be located. User Action Add the SYSIN DD statement and rerun.

VRA1406E CONTROL STATEMENT IS NON-BLANK IN COLUMN 72 Explanation There is a non-blank character found in column 72 in the input parameters. User Action Correct and rerun.

VRA1407E PREVIOUS CONTROL STATEMENT DID NOT CONTAIN A PARAMETER AND IS NOT A COMMENT

Explanation The previous input parameter is not a comment (* in column 1) or a valid input parameter. User Action Correct and rerun.

VRA1408E UNRECOGNIZED PARAMETER 'XXXXXXXX' Explanation This input parameter (xxxxxxxx) is not valid. User Action Correct and rerun.

VRA1409E 'XXXXXXXX' IS A DUPLICATE PARAMETER Explanation This input parameter (xxxxxxxx) has been duplicated in an earlier control statement. User Action Correct and rerun.

VRA1410E LENGTH OF XXXXXXXXX VALUE IS INVALID Explanation This input parameter’s (xxxxxxxx) value exceeds the maximum allowable length. User Action Correct and rerun.

VRA1411E VALUE OF 'XXX' IS INVALID FOR RESOURCEDETAIL Explanation The RESOURCEDETAIL input parameter’s value is invalid. User Action Correct and rerun.



VRA1412E VALUE OF 'XXX' IS INVALID FOR LISTALLUSERS Explanation The LISTALLUSERS input parameter’s value is invalid. User Action Correct and rerun.

VRA1413E INTERNAL ERROR PROCESSING GROUP GROUPNAM Explanation The Administrator’s group tree report program, VRAGPRT, detected an error trying to find group groupnam in the internal group tree table. User Action Call Vanguard Technical Support.

VRA1414E VSAM ERROR DETECTED Explanation An error was detected while reading the Extract VSAM file. This is reported with message VRA1415E. User Action Review message VRA1415E.

VRA1415E RPL FEEDBACK CODE=XX XX XX XX LOCATION= Explanation A VSAM I/O request was not completed successfully. The RPL codes are displayed in the message text. These codes described in the VSAM Administration Macro Instruction. User Action Contact Vanguard Technical Support.

VRA1417E GETMAIN FAILED FOR SYSIN STORAGE. GETMAIN RC=X’XX’. Explanation VRAGRPT failed to obtain the storage required for SYSIN processing. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1418E FREEMAIN FAILED FOR SYSIN STORAGE. FREEMAIN RC=X’XX’. Explanation FREEMAIN processing for VRAGRPT failed to free SYSIN storage. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1419E SYSIN STORAGE OVERFLOWED. Explanation SYSIN processing overflowed its storage. Processing terminates. User Action The maximum number of SYSIN control statements that can be retained by the VRAGRPT program is 24. The count includes all comments and control statements. Reduce the number of comments and control statements in the SYSIN control statement stream to VRAGRPT to less



than 24 and rerun the job. If the error persists after this correction, contact Vanguard Technical Support for further assistance.

VRA1420E VALUE OF 'X' IS INVALID FOR HDGS. Explanation The x represents the invalid parameter specified for Heading generation. Valid parameters are either Y for yes or N for no. When a value other than either of these is encountered, it is displayed in the message Processing terminates. User Action Correct the HDGS heading generation parameter. Resubmit the job. If the error persists after this correction, contact Vanguard Technical Support for further assistance.

VRA1421E VRAOPT00 MEMBER PROCESSING DETECTED ERROR RC=X'XX'. Explanation An error was detected while processing the VRAOPT00 options member. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1422E NO VALID PARAMETER DETECTED FOR UPPERCASE KEYWORD IN VRAOPT00.

Explanation Unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1423E INVALID PARAMETER 'XXXXXXX’ SPECIFIED FOR THE UPPERCASE OPTION. Explanation An invalid parameter was specified for the UPPERCASE option. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1424E NO VALID PARAMETER DETECTED FOR UPPERCASE KEYWORD IN VRAOPT00.

Explanation Access Analysis is unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.



VRA1425E INVALID PARAMETER 'XXXXXXX ' SPECIFIED FOR THE UPPERCASE OPTION. Explanation Access Analysis was not able to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1426E VRAOPT00 MEMBER PROCESSING DETECTED ERROR RC=X'XX '. Explanation Access Analysis processing detected an error while processing the VRAOPT00 options member. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1427E SYSIN STORAGE GETMAIN FAILED. RC=X'XX’. Explanation GETMAIN failed to obtain the storage required for SYSIN processing. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1428E SYSIN STORAGE OVERFLOWED. Explanation SYSIN processing overflowed its storage. Processing terminates. User Action The maximum number of SYSIN control statements that can be retained by the VRAGRPT program is 24. The count includes all comments and control statements. Reduce the number of comments and control statements in the SYSIN control statement stream to VRAGRPT to less than 24 and rerun the job. If the error persists after this correction, contact Vanguard Technical Support for further assistance.

VRA1429E FREEMAIN FAILED FOR SYSIN STORAGE. FREEMAIN RC =X'XX’. Explanation FREEMAIN processing failed to free SYSIN storage. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.



VRA1430E INVALID HDGS PARAMETER. MUST BE Y OR N. Explanation Dataset Access reporting is unable to identify a valid parameter for the HDGS keyword. Processing terminates. User Action Correct the HDGS heading generation parameter. Resubmit the job.

VRA1431E DATASET ACCESS PROCESSING REPORTED AN ERROR. RC=X’XX’. Explanation Dataset Access reporting detected an error while processing the VRAOPT00 options member. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.

VRA1432E DATASET ACCESS PROCESSING IS UNABLE TO IDENTIFY ANY UPPERCASE PARAMETER.

Explanation Dataset Access reporting is unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1433E DATASET ACCESS PROCESSING REPORTED AN INVALID UPPERCASE PARAMETER='XXXXXXX’.

Explanation Dataset Access reporting is unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1434E SCOPE REPORT PROCESSING REPORTED AN ERROR. RC=X'XX’. Explanation Scope reporting detected an error while processing the VRAOPT00 options member. Processing terminates. User Action Record the message and return code. Contact Vanguard Technical Support for assistance.



VRA1435E SCOPE REPORT PROCESSING IS UNABLE TO IDENTIFY ANY UPPERCASE PARAMETER.

Explanation Scope reporting is unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1436E SCOPE REPORT PROCESSING REPORTED AN INVALID UPPERCASE PARAMETER='XXXXXXX’.

Explanation Scope reporting is unable to find a valid parameter for the UPPERCASE keyword in the VRAOPT00 options member. Processing terminates. User Action Review the VRAOPT00 options member and correct the UPPERCASE parameter to a valid specification. The valid specifications are UPPERCASE(ASIS), UPPERCASE(HEADERS), UPPERCASE(ALL). Resubmit the job.

VRA1456E YOU ARE NOT AUTHORIZED TO ACCESS THIS USERID. Explanation An error occurred trying to process a batch User Rebuild command, due to lack of user authority to access the requested userid. User Action Take corrective action and retry, if applicable.

VRA1457E YOU ARE NOT AUTHORIZED TO ACCESS THIS GROUP. Explanation An error occurred trying to process a batch Group Rebuild command, due to lack of user authority to access the requested group. User Action Take corrective action and retry, if applicable.

VRA1458E YOU ARE NOT AUTHORIZED TO ACCESS THIS RESOURCE. Explanation An error occurred trying to process a batch General Resource Rebuild command, due to lack of user authority to access the requested general resource entity. User Action Take corrective action and retry, if applicable.



VRA1459E YOU ARE NOT AUTHORIZED TO ACCESS THIS DATASET. Explanation An error occurred trying to process a batch Dataset Rebuild command, due to lack of user authority to access the requested dataset profile. User Action Take corrective action and retry, if applicable.

VRA1501E ACB OPEN FAILED FOR DDNAME=DDNAME. VSAM RC=CCC. VSAM RS=RRRRRR.

Explanation The program was unable to OPEN the VSAM CLUSTER identified by DDNAME. CCCC is the decimal return code and RRRRRR is the decimal reason code from OPEN. User Action To determine the nature of the error, examine the return code's explanation in the IBM DFSMS/MVS Macro Instructions for Data Sets manual in topic "OPEN Return and Reason Codes". Examine the JOBLOG for other related error messages. If you cannot correct the problem, Contact Vanguard Technical Support.

VRA1502E DCB OPEN FAILED FOR DDNAME=DDNAME Explanation The program was unable to OPEN the data set identified by DDNAME. User Action Examine the JOBLOG for related error messages. If you cannot correct the problem, Contact Vanguard Technical Support.

VRA1503E THE FIRST RECORD OF THE SVSAMI FILE IS NOT RECORD TYPE TTTT. Explanation The program’s input file verification process expects the first record of the input extract file pointed to by the SVSAMI MVS JCL DD statement to be record type TTTT. User Action Ensure that the SVSAMI MVS JCL DD statement points to a valid SVSAM VSAM extract file that was created by a prior release of the Administrator that is supported by the program.

VRA1504E THE SVSAMI FILE COULD NOT BE VALIDATED. Explanation The program’s input file verification process could not identify the version of the Administrator that created the input SVSAM extract file. The program supports a limited number of VSAM extract files that were created by prior versions of the Administrator. User Action Ensure that the SVSAMI MVS JCL DD statement points to a valid SVSAM VSAM extract file that was created by a prior release of the Administrator that is supported by the program.

VRA1505E DBID FIELD OF MVSAMI DOES NOT MATCH THE DBID FIELD OF SVSAMI. Explanation The program’s input file verification process detected that the VSAM extract file database ID found in the SVSAMI file does not match the database ID found in the MVSAMI file.



User Action Ensure that the MVSAMI MVS JCL DD statement points to a valid MVSAM VSAM extract file that was created at the same time as the corresponding SVSAM file pointed to by the SVSAMI MVS JCL DD statement.

VRA1506E THE KEY LENGTH OF THE MVSAMI FILE IS INVALID. Explanation The program’s input file verification process detected that the key length of the VSAM CLUSTER pointed to by the MVSAMI MVS JCL DD statement is invalid. User Action Ensure that the MSAMI MVS JCL DD statement points to a valid MVSAM VSAM extract file that was created at the same time as the corresponding SVSAM file pointed to by the SVSAMI MVS JCL DD statement.

VRA1507E THE FOLLOWING RECORD WAS FOUND IN THE AVSAMI FILE, BUT VRAXVVRR POINTS TO THE BVSAMI FILE.

Explanation The program found a record in the AVSAMI file, but the program’s internal definition indicates that the record should be in the BVSAMI file. AVSAMI and BVSAMI can be SVSAMI or MVSAMI. VRAXVVRR is the name of the macro where the record definition was found. The program continues, but the conversion is incomplete. User Action This is a program error. Contact Vanguard Technical Support.

VRA1508W THE FOLLOWING RECORD WAS FOUND IN THE AVSAMI FILE, BUT IS NOT DEFINED IN VRAXVVRR.

Explanation The program found a record in the AVSAMI file, but the record is not defined in the program’s internal definition. AVSAMI can be SVSAMI or MVSAMI. VRAXVVRR is the name of the macro where the record should be defined. The program continues, but the conversion is incomplete. User Action This is a program error. Contact Vanguard Technical Support.

VRA1509E THE VRADOMK PROGRAM WAS NOT RUN ON THE SVSAMI FILE. Explanation The VRADOMK program was not run after the extract step when the input VSAM extract files were created. User Action Use a VSAM extract file that was successfully created with the VRADOMK program step.



VRA1510E THE INPUT EXTRACT FILE IS NOT A FULL RUN EXTRACT FILE. Explanation The program can only process complete FULL extract files. User Action Use a VSAM extract file that was successfully created as a FULL extract.

VRA1511I THE FOLLOWING RECORD WAS DELETED FROM AVSAMI. Explanation The conversion program deleted the record from the SVSAMI or MVSAMI file. The reason the record is deleted is given in the message immediately following this message. The description of the deleted record is contained in the following VRA1520I messages. User Action None.

VRA1520I RECORD KEY INFORMATION: DBID=DBID. TYPE=TTTT. KEYDATA=KEYINFO. RECORD DESCRIPTION: DESCRIPTION.

Explanation This message is issued in conjunction with other messages to help diagnose problems or document program actions. It describes the record associated with the error or action. DBID is the 8-character database ID of the file where the record resides. TTTT is the VSAM extract file record type number. KEYINFO is the rest of the SVSAM key or the first 60-bytes of the MVSAM key of the record. DESCRIPTION is a description of the record. User Action None.

VRA1522I RECORD WAS ELIMINATED BECAUSE RECORD TYPE RRRR IS NOT USED IN THE CURRENT RELEASE.

Explanation This message is issued in conjunction with message VRA1511I to provide a reason for the deletion of a VSAM extract file record. In this case, record type RRRR was eliminated because the current release of Administrator does not use that record type. The class control record for record type RRRR was deleted and the record type counts for of these record types was updated to reflect the deleted record. User Action None.

VRA1523I THE DATA IN THIS RECORD WAS MOVED TO RECORD TYPE RRRR. Explanation This message is issued in conjunction with message VRA1511I to provide a reason for the deletion of a VSAM extract file record. In this case, the RACF related information was moved to record type RRRR. User Action None.



VRA2000I VANGUARD ADMINISTRATOR AUTOMATED COMMAND SCHEDULER (ACS) INITIALIZATION STARTED.

Explanation The Automated Command Scheduler has started. User Action None. This is an informational message.

VRA2001I OPTIONS DISPLAY: Explanation This message is issued in response to the MVS MODIFY acstask, DISPLAY command and during ACS initialization. The current values for the VRAOPT00 keywords are listed. User Action None. This is an informational message.

VRA2002I ACS OPERATOR COMMUNICATIONS AVAILABLE. Explanation This message is issued when ACS is ready to process MVS MODIFY commands. User Action None. This is an informational message.

VRA2003I ACS INITIALIZATION COMPLETE. Explanation This message is issued when ACS initialization has completed. ACS then performs a scan of the CVSAM file looking for scheduled commands that did not complete and new scheduled commands that are eligible to be executed. User Action None. This is an informational message.

VRA2004E VANGUARD ADMINISTRATOR ACS IS ALREADY ACTIVE IN ANOTHER ADDRESS SPACE.

Explanation An attempt to start the ACS client failed because it is already running on the system. ACS will allow only one ACS client at a time to run on any one MVS system. User Action Either stop the ACS client that is running and start this ACS client, or use the ACS client that is running.

VRA2005E SET ESTAE FAILED FOR VRA ACS WITH RC=CCCC Explanation The ACS client could not establish an ESTAE environment using the MVS ESTAEX service. CCCC is the decimal return code returned by the MVS ESTAEX service. User Action Determine the nature of the error by examining the explanations of the MVS ESTAEX service return code in the MVS Programming: Authorized Assembler Services Reference in topic Return and Reason Codes for the ESTAEX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.



VRA2006E CANCEL ESTAE FAILED FOR VRA ACS WITH RC=CCCC. Explanation The ACS client could not delete an ESTAE environment using the MVS ESTAEX service. CCCC is the decimal return code returned by the MVS ESTAEX service. User Action Determine the nature of the error by examining the explanations of the MVS ESTAEX service return in the MVS Programming: Authorized Assembler Services Reference in topic Return and Reason Codes for the ESTAEX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2007E USER UUUUUUUU IS NOT AUTHORIZED TO EXECUTE THE VANGUARD ADMINISTRATOR AUTOMATED COMMAND SCHEDULER

Explanation An attempt to start the ACS client failed because RACF User ID UUUUUUUU that is assigned to the job is not authorized. User Action If the user is not supposed to be authorized, then no action is required. If the user should be authorized to execute the ACS client, give the user READ access to the FACILITY class profile VRA$.AUTOCOMMANDSCHEDULER.

VRA2008E VANGUARD ADMINISTRATOR ACS REQUIRES RACF VERSION 1.9.0 OR HIGHER.

Explanation Vanguard's Administrator cannot run on this MVS system. User Action None.

VRA2010I VANGUARD ADMINISTRATOR ACS IS TERMINATING. Explanation ACS has started termination processing. User Action None. This is an informational message.

VRA2011I VANGUARD ADMINISTRATOR ACS IS ATTEMPTING TERMINATION AGAIN. Explanation ACS termination was interrupted and is now resuming. User Action None. This is an informational message.

VRA2012I VANGUARD ADMINISTRATOR ACS TERMINATED. Explanation ACS termination is complete. User Action None. This is an informational message.



VRA2013E UNABLE TO CREATE THE VRA ACS CVT USING SUBSYSTEM NAME SSID. RC=CCCC. RS=RRRRRR.

Explanation The ACS communications vector table (CVT) could not be allocated. CCCC is the decimal return code and RRRRRR is the reason code from the MVS IEFSSI REQUEST=ADD service. SSID is the subsystem ID that ACS attempted to create. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return and Reason Codes for the IEFSSI service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2014E THE SSID SUBSYSTEM IS IN USE BY ANOTHER APPLICATION. Explanation The subsystem ID SSID is not available for use by ACS. User Action Determine if SSID should be used by the other application or ACS. If SSID is in use by another application, specify a new SSID in keyword ACS_SUBSYSTEM_NAME in the VRAOPT member of the VANOPTS library. If SSID should be used by ACS, you will have to perform an IPL of the MVS system to free the SSID.

VRA2015E UNSUPPORTED COMPLETION CODE CCCC FOUND IN ECB-TYPE BY THE SUBTASK_ID.

Explanation This is an internal programming error. It identifies that a valid communication occurred between ACS subtasks, but the completion code, CCCC, is not valid for the posted ECB. ECB-TYPE identifies which of the subtask's ECB was posted. SUBTASK_ID identifies which ACS subtask was posted. User Action Contact Vanguard Technical Support.

VRA2016E UNKNOWN ECB POSTED FOR THE SUBTASK_ID SUBTASK. Explanation This is an internal programming error. It identifies that an invalid communication was received by ACS subtask SUBTASK_ID. User Action Contact Vanguard Technical Support.

VRA2017I KEYWORD.........................VALUE Explanation This message is issued after message VRA2001I, and contains the name of an ACS keyword and the current value of the keyword. User Action None. This is an informational message.



VRA2018E THERE IS NO USERID DEFINED FOR ACS. Explanation An attempt to start the ACS client failed because a RACF User ID was not assigned to the job. User Action Assign a RACF User ID and give the user READ access to the FACILITY class profile VRA$.AUTOCOMMANDSCHEDULER.

VRA2019E USERID *BYPASS* IS NOT VALID FOR ACS. Explanation An attempt to start the ACS client failed because a RACF User ID was not assigned to the job. User Action Assign a RACF User ID and give the user READ access to the FACILITY class profile VRA$.AUTOCOMMANDSCHEDULER.

VRA2020E DYNAMIC ALLOCATION FAILED FOR VRALOG. RC=CCCC. RS=RRRR. Explanation The VRALOG file could not be dynamically allocated. CCCC is the decimal return code and RRRR is the decimal service reason code from the MVS DYNALLOC service. If available, messages formatted by the MVS DYNALLOC extended message-processing program are displayed following this message. User Action Determine the nature of the error by examining the explanations of the MVS DYNALLOC service return and reason codes in the MVS Programming: Authorized Assembler Services Guide in topic Interpreting DYNALLOC Return Codes. Also, read the messages formatted by the MVS DYNALLOC extended message-processing program. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2021E DYNAMIC UNALLOCATION FAILED FOR VRALOG. RC=CCCC. RS=RRRR. Explanation The VRALOG file could not be dynamically unallocated. CCCC is the decimal return code and RRRR is the decimal reason code from the MVS DYNALLOC service. If available, messages formatted by the MVS DYNALLOC extended message-processing program are displayed following this message. User Action Determine the nature of the error by examining the explanations of the MVS DYNALLOC service return and reason codes in the MVS Programming: Authorized Assembler Services Guide in topic Interpreting DYNALLOC Return Codes Also, read the messages formatted by the MVS DYNALLOC extended message processing program. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.



VRA2022E FILE OPEN FAILED FOR DDNAME Explanation The program was unable to OPEN the file identified by DDNAME. User Action Examine the JOBLOG to determine the nature of the error and correct the problem. If you cannot correct the problem, Contact Vanguard Technical Support.

VRA2023E IEFDB476 CALL FAILED. RC=CCCC. RS=RRRR. Explanation A call to the MVS extended message-processing program, IEFDB476, failed. CCCC is the decimal return code and RRRR is the decimal reason code from IEFDB476. User Action Determine the nature of the error by examining the explanations for the return codes in the MVS Programming: Authorized Assembler Services Guide in topic Interpreting Return Codes from IEFDB476. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2024E VRALOG SUBTASK CREATION FAILED WITH RC =CCCC. Explanation The MVS ATTACHX for the VRALOG file subtask failed with decimal return code CCCC. User Action Determine the nature of the error by examining the explanations for the return codes in the MVS Programming: Authorized Assembler Services Reference in topic Return Codes for the ATTACH and ATTACHX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2025E NAME-TOKEN CALL FAILED. FUNC=SERVICE_ID. RC=CCCC. Explanation A call to the MVS Name/Token Service failed with decimal return code CCCC. The SERVICE_ID is the name of the MVS Name/Token Service that failed. User Action Return codes from 0 through 100 are MVS Name/Token Service return codes. To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS Name/Token service that failed. If you cannot correct the problem with these resources, Contact Vanguard Technical Support. Return codes over 100 are for Administrator detected errors. If you receive a return code over 100, Contact Vanguard Technical Support.



VRA2026E VRALOG INITIALIZATION FAILED WITH RC=RRRR. Explanation The VRALOG file program failed to initialize. RRRR is the decimal return code from the VRALOG file program.

Code Description 12 OPEN for VRALOG file failed. 16 Dynamic allocation of VRALOG failed.

User Action Examine the JOBLOG to determine the nature of the error and correct the problem. If you cannot correct the problem, Contact Vanguard Technical Support.

VRA2030E REQUEST OF VIRTUAL STORAGE FOR THE STORAGE_ID AREA FAILED WITH RC=CCCC.

Explanation This is an internal programming error. An error occurred when ACS attempted to obtain or release the storage identified as STORAGE_ID. User Action Contact Vanguard Technical Support.

VRA2031E NAME-TOKEN SERVICES FUNCTION CALL SERVICE_ID FAILED WITH RC=CCCC.

Explanation A call to the MVS Name/Token Service failed with decimal return code CCCC. The SERVICE_ID is the name of the MVS Name/Token Service that failed. User Action Return codes from 0 through 100 are MVS Name/Token Service return codes. To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS Name/Token Service that failed. If you cannot correct the problem with these resources, Contact Vanguard Technical Support. Return codes over 100 are for Administrator detected errors. If you receive a return code over 100, Contact Vanguard Technical Support.

VRA2032E PARTIAL SDUMPX TAKEN. RC=CCCC. RS=RRRRRR. Explanation A call to the MVS SDUMPX service failed with return code CCCC and reason code RRRRRR. The system was only able to take a partial address space dump. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS SDUMPX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.



VRA2033E SDUMPX SUPPRESSED. RC=CCCC. RS=RRRRRR. Explanation A call to the MVS SDUMPX service failed with return code CCCC and reason code RRRRRR. The system suppressed the requested address space dump. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS SDUMPX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2034E SDUMPX FAILED. RC=CCCC. RS=RRRRR. Explanation A call to the MVS SDUMPX service failed with return code CCCC and reason code RRRRRR. The system was unable to process the request for an address space dump. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS SDUMPX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2035I SDUMPX SUCCESSFUL. TITLE=COMMAND SCHEDULER SDUMP #MAIN- YYYYMMDD-HHMMSSTH

Explanation The call to the MVS SDUMPX service was completed. yyyymmdd-hhmmssth is the date and time stamp when the dump was taken. The MVS SDUMPX service is invoked after an ABEND occurs and the ACS_ENABLE_SDUMPS keyword is set to "YES". This is usually done at the request of Vanguard Technical Support personnel. User Action Contact Vanguard Technical Support.

VRA2038E THE ACS TASK IS ALREADY ACTIVE ON ANOTHER MVS SYSTEM WITHIN THE GRS RING.

Explanation An attempt was made to start an ACS task using the same CVSAM file that is being used by another ACS task. There can be only one ACS task active for a given CVSAM file within the GRS ring. User Action Decide which MVS system you want to use to execute the ACS task. Always start the ACS task on that MVS system.



VRA2039E CVSAM ACS SEMAPHORE (ENQ) FAILED. RC=CCCC. Explanation ACS received a terminating return code from the MVS ENQ service while attempting to determine if there is an ACS task active for a CVSAM file. The value of cccc is the return code from the MVS ENQ service. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return and Reason Codes for the ENQ service. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2040E ATTACH FOR THE SUBTASK_ID SUBTASK FAILED WITH RC=CCCC. Explanation ACS attempted an attach for the SUBTASK_ID subtask, but the MVS ATTACHX service failed with decimal return code CCCC. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS ATTACHX service. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2041E SUBTASK_ID INITIALIZATION ABEND. TYPE CODE REASON CODE RRRRRRRR.

Explanation The ACS SUBTASK_ID subtask terminated abnormally during initialization. TYPE is either USER ABEND or SYSTEM COMPLETION. CODE is Unnnn for USER ABEND or Snnn for SYSTEM COMPLETION. RRRRRRRR is the hexidecimal reason code associated with the ABEND. User Action To determine the nature of the error, examine the return code's explanation in MVS System Codes. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.



VRA2042E SUBTASK_ID UNEXPECTED TERMINATION. TYPE CODE REASON CODE RRRRRRRR.

Explanation The ACS SUBTASK_ID subtask terminated abnormally during ACS operation (after initialization). TYPE is either USER ABEND or SYSTEM COMPLETION. CODE is Unnnn for USER ABEND or Snnn for SYSTEM COMPLETION. RRRRRRRR is the hexadecimal reason code associated with the ABEND. User Action To determine the nature of the error, examine the return code's explanation in MVS System Codes. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2043E VRA ACS TERMINATED WITH TYPE CODE CODE REASON CODE RRRRRRRR. Explanation The ACS main task terminated abnormally during ACS operation (after initialization). TYPE is either USER ABEND or SYSTEM COMPLETION. CODE is Unnnn for USER ABEND or Snnn for SYSTEM COMPLETION. RRRRRRRR is the hexadecimal reason code associated with the ABEND. User Action To determine the nature of the error, examine the return code's explanation in MVS System Codes. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2044E SUBTASK_ID INITIALIZATION FAILED. RC=CCCC. Explanation The ACS SUBTASK_ID subtask initialization failed with decimal return code CCCC. User Action To determine the nature of the error, examine VRALOG file for error messages issued from the failing subtask. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2045I SUBTASK_ID TERMINATED. Explanation The ACS SUBTASK_ID subtask has terminated. User Action None. This is an informational message.

VRA2046I SUBTASK_ID RESTART FAILED. Explanation An attempt to restart the ACS SUBTASK_ID subtask failed. User Action None. This is an informational message.



VRA2047E SUBTASK_ID RETRY COUNT HAS BEEN REACHED. Explanation No more attempts to restart the ACS SUBTASK_ID subtask can be made because the maximum number of retries is exhausted. Restart attempts are the result of abnormal subtask terminations. The number of retry attempts is fixed within ACS. User Action To determine why retries are being attempted, examine the VRALOG and the MVS SYSLOG for error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2048I ATTEMPTING RESTART OF THE SUBTASK_ID. Explanation The ACS SUBTASK_ID subtask is being restarted. Restart attempts are the result of abnormal subtask terminations. The number of retry attempts is fixed within ACS. User Action To determine why the retry is being attempted, examine the VRALOG and the MVS SYSLOG for error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2049I STARTING THE SUBTASK_ID. Explanation The ACS SUBTASK_ID subtask is being started. User Action None. This is an informational message.

VRA2050I STOPPING THE SUBTASK_ID. Explanation A request was sent to the ACS SUBTASK_ID subtask to terminate. User Action None. This is an informational message.

VRA2060I UNSUPPORTED COMMAND FOUND ON CIB QUEUE. CIBVERB=X'VVVVVVVVV'. Explanation The ACS operator communications interface has received an invalid request from the MVS CIB service. VVVVVVVV is the hexadecimal code given by MVS. User Action Contact Vanguard Technical Support.

VRA2061E QEDIT CIB FREE FAILED. RC=CCCC. Explanation The ACS operator communications interface received decimal return code CCCC when it attempted to release a CIB control block. User Action Contact Vanguard Technical Support.



VRA2062E QEDIT CIB COUNTER UPDATE FAILED. RC=CCCC. Explanation The ACS operator communications interface received decimal return code CCCC when it attempted to update the CIB control block counter. User Action Contact Vanguard Technical Support.

VRA2065W INVALID ACS MODIFY FUNCTION: COPY_OF_CONSOLE_INPUT Explanation The ACS operator communications interface received the text string COPY_OF_CONSOLE_INPUT as input on the MVS MODIFY command, but the text is not recognized. User Action Correct the syntax of the COPY_OF_CONSOLE_INPUT and retry the MVS MODIFY command. Be sure that the command is intended for ACS.

VRA2066W INVALID OPERAND(S) FOR THE FUNCTION_ID MODIFY COMMAND: INVALID_OPERANDS.

Explanation The ACS operator communications interface received an invalid operand for ACS MVS MODIFY FUNCTION_ID command. The invalid operand is identified in the text string INVALID_OPERANDS. The default modify command operands will be used. User Action If the default values are not correct for your request, correct the syntax of the INVALID_OPERANDS and retry the MVS MODIFY command. Be sure that the command is intended for ACS.

VRA2067I USING MODIFY COMMAND DEFAULTS. Explanation This message is issued after message VRA2066W User Action None. This is an informational message.

VRA2068I VRALOG SPIN COMPLETED. Explanation This message is issued after the VRALOG SYSOUT file has been closed, unallocated, and reallocated. User Action None. This is an informational message.

VRA2070I SHUTDOWN WAS REQUESTED BUT THERE ARE PENDING EVENTS THAT MAY NOT BE EXECUTED IF ACS IS STOPPED.

Explanation An attempt was made to stop the ACS task when there were one or more scheduled events that have not been executed. Message VRA2071A is issued following this message. User Action Enter a response to message VRA2071A.



VRA2071A REPLY 'Y' TO CONTINUE WITH SHUTDOWN OR 'N' TO LEAVE ACS ACTIVE. Explanation This message is issued after VRA2070I. Respond Y to confirm ACS shutdown. Respond N to leave ACS active and bypass shutdown. User Action Reply Y or N to this message.

VRA2072I INVALID RESPONSE. Explanation The response to message VRA2071A is invalid. The response must be the character N or the character Y. User Action None.

VRA2073I SHUTDOWN BYPASSED. ACS IS REMAINING ACTIVE. Explanation ACS termination was not performed. ACS remains active. This message is received when the response to message VRA2071A was N. User Action None.

VRA2100W USING DEFAULT OF DEFAULT_VALUE FOR THE KEYWORD OPTION. Explanation This message is issued when the ACS uses the DEFAULT_VALUE for the listed KEYWORD. User Action If the DEFAULT_VALUE is not correct in your environment, specify a value for the KEYWORD option.

VRA2101I OPTION KEYWORD IS NOT DEFINED IN THE MEMBER MEMBER OF THE DDNAME DATA SET.

Explanation This message is issued when the KEYWORD OPTION is not specified in the MEMBER member of the data set pointed to by DDNAME. User Action None. This is an informational message.

VRA2102E MEMBER MEMBERNM WAS NOT DEFINED IN THE DDNAME DATA SET. Explanation This message is issued when the MEMBER member is not found in the data set pointed to by DDNAME. User Action The MEMBER member is required for ACS to function. Correct the problem before restarting ACS.

VRA2103E THE DDNAME DATA SET IS NOT DEFINED IN THE JCL FOR THE VRA ACS. Explanation This message is issued when the DDNAME DD statement is not specified in the JCL for executing the ACS client. User Action The DDNAME DD statement is required for ACS to function. Correct the problem before restarting ACS.



VRA2104W THE VALUE OF THE KEYWORD OPTION IS LONGER THAN NNNN CHARACTERS.

Explanation This message is issued when the KEYWORD OPTION is not specified correctly. ACS will not initialize if KEYWORD is a required OPTION. If KEYWORD is not a required OPTION, the default value is used and execution continues. User Action Correct the syntax in the value of the KEYWORD OPTION and restart ACS.

VRA2105E UNSUPPORTED RETURN CODE FROM THE PROGNAME PROGRAM RC=CCCC.

Explanation Program PROGNAME passed the decimal return code CCCC that is unkown to ACS, and ACS does not know how to handle the return code. User Action Contact Vanguard Technical Support.

VRA2106W OPTION KEYWORD HAS NO DEFAULT VALUE. Explanation The KEYWORD OPTION was not specified and there is no default for this option. User Action If having no value for the KEYWORD OPTION is not correct in your environment, specify a value for the KEYWORD option.

VRA2107E VALUE IS INVALID FOR THE KEYWORD OPTION. Explanation The VALUE specified for the KEYWORD OPTION is invalid. User Action Correct the VALUE specify of the KEYWORD option.

VRA2108E THE VALUE OF THE KEYWORD OPTION MUST BE 'YES' OR 'NO'. Explanation The value specified for the KEYWORD OPTION is not YES or NO. User Action Set the value of the KEYWORD option to YES or NO.

VRA2109E THE VALUE OF THE KEYWORD OPTION MUST BE NUMERICS. Explanation The value specified for the KEYWORD OPTION is not a numeric. User Action Set the value of the KEYWORD to a numeric value.

VRA2110E THE VALUE OF THE KEYWORD OPTION MUST A TIME INTERVAL IN THE FORM HHMMSS.

Explanation The value specified for the KEYWORD OPTION must be in the form HHMMSS, where HH is 1 to 24 hours, MM is 1 to 59 minutes, and SS is 1 to 59 seconds. User Action Set the value of the KEYWORD to a value in the form HHMMSS.



VRA2111E THE VALUE OF THE KEYWORD OPTION MUST BE 'OFF' OR 'ON'. Explanation The value specified for the KEYWORD OPTION is not OFF or ON. User Action Set the value of the KEYWORD option to 'OFF' or 'ON'.

VRA2112E THE VALUE OF THE KEYWORD OPTION MUST A NUMBER FROM LOW TO HIGH.

Explanation The value specified for the KEYWORD OPTION is not a number between LOW and HIGH. User Action Set the value of the KEYWORD option to a number from LOW to HIGH.

VRA2113E OPTION KEYWORD_2 IS REQUIRED WHEN KEYWORD_1 IS SPECIFIED. Explanation KEYWORD_1 is specified, but the associated required KEYWORD_2 was not specified. You cannot specify KEYWORD_1 without KEYWORD_2. User Action You must specify KEYWORD_1 and KEYWORD_2, or do not specify KEYWORD_1.

VRA2114E OPTION KEYWORD_1 IS MUTUALLY EXCLUSIVE WITH THE KEYWORD_2 OPTION.

Explanation KEYWORD_1 is specified, but the mutually exclusive KEYWORD_2 was also specified. You cannot specify KEYWORD_1 and KEYWORD_2 for the same execution of ACS. User Action Either specify KEYWORD_1 or specify KEYWORD_2.

VRA2115E OPTION KEYWORD IS REQUIRED BUT IS NOT IN THE MEMBER MEMBER OF THE DDNAME DATA SET.

Explanation KEYWORD is a required keyword but it was not specified in the MEMBER member of the options library pointed to by the DDNAME DD statement. User Action Specify the KEYWORD OPTION and restart ACS.



VRA2122I THE VALUE OF THE KEYWORD OPTION WAS NOT UPDATED. Explanation The value specified for the KEYWORD OPTION was not updated in response to the MVS MODIFY acstask, REFRESH command. When the REFRESH operand is specified, ACS will only update parameter values that are specified in member VRAOPT00 of the VANOPTS library. This message lists the keyword options that are not updated in response to the MVS MODIFY acstask, REFRESH command. User Action If you intended not to update this keyword option, then take no action. If this keyword option should be updated, specify the keyword option in the VRAOPT00 member of the VANOPTS library and reissue the MVS MODIFY acstask, REFRESH command.

VRA2124W OPTION VALUES WERE NOT CHANGED DUE TO ERROR(S) FOUND IN THE MEMBERNM MEMBER OF THE DDNAMENM DATA SET.

Explanation None of the keyword options were updated in response to the MVS MODIFY ACSTASK, REFRESH or RESET command because ACS found errors in one or more of the keyword options. User Action Examine the VRALOG for messages that describe the keyword option errors that prevent the values from being updated.

VRA2125I OPTION REFRESH COMPLETED. Explanation This message is issued after all of the current values for the ACS keyword options are listed. User Action None. This is an informational message.

VRA2200I EVENT-ANALYZER STARTED. Explanation This message is issued during ACS initialization by the event analyzer subtask (CVSAM scan task). This message is also issued when the event analyzer subtask is restarted. User Action None. This is an informational message.

VRA2201I EVENT ANALYSIS STARTING. Explanation This message is issued when the ACS event analyzer subtask begins the CVSAM file scan. User Action None. This is an informational message.



VRA2202I EVENT ANALYSIS COMPLETED. Explanation This message is issued when the ACS event analyzer subtask completes the CVSAM file scan. User Action None. This is an informational message.

VRA2204W CVSAM FILE I/O ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC=CIO_RC. CIO RS=CIO_RS. VSAM RC=VSAM_RC. VSAM RS=VSAM_RS.

Explanation This message is issued by the ACS event analyzer subtask when a physical I/O error occurs while processing the CVSAM file. FUNCT_TYPE is the VSAM function attempted, such as OPEN or PUT. ACCESS_TYPE is the access intent for OPEN and the CVSAM record type for GET and PUT. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. VSAM_RC is the return code and VSAM_RS reason code set by MVS VSAM. User Action To determine the nature of the error described by the MVS VSAM return and reason codes, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic VSAM Macro Return and Reason Codes. Also, examine the VRALOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2205W CVSAM FILE PROCESSING ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC= CIO_RC. CIO RS=CIO_RS.

Explanation This message is issued by the ACS event analyzer subtask when a call to the CVSAM file interface program fails for reason(s) not related to VSAM. FUNCT_TYPE is the VSAM function attempted, such as GETNEXT or GETUPDT. ACCESS_TYPE is the CVSAM record type being accessed. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. User Action Contact Vanguard Technical Support.

VRA2206W ERROR ALLOCATING WQE. ANALYSIS TERMINATING. Explanation This message is issued when the ACS event analyzer subtask cannot allocate an internal control area called a work queue element (WQE). User Action Increase the region size for the ACS client. If the problem persists, Contact Vanguard Technical Support.



VRA2207W ERROR ADDING WQE TO QUEUE. ANALYSIS IS TERMINATING. Explanation This message is issued when the ACS event analyzer subtask cannot queue an internal control area called a work queue element (WQE) to the event manager's work queue. User Action Contact Vanguard Technical Support.

VRA2208W EVENT ANALYSIS WAS NOT COMPLETED. Explanation This message is issued when the ACS event analyzer subtask cannot successfully complete the CVSAM file scan. User Action To determine the reason this message was issued, examine the VRALOG for related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2209E EVENT MANAGER IS NOT ACTIVE. EVENT ANALYZER IS TERMINATING. Explanation This message is issued when the ACS event analyzer subtask starts the CVSAM file scan and determines that the event manager subtask is not active. User Action To determine the reason this message was issued, examine the VRALOG for related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2210W THE COMMAND(S) ENTERED BY USERID USER_ID ON DATE AT TIME WAS(WERE) BYPASSED.

Explanation The scheduled command(s) that were entered into the CVSAM file by the USER_ID on DATE and TIME were bypassed because the ACS_COMMAND_BYPASS_IF_OLDER_THAN value was exceeded. User Action You may reschedule the command(s).

VRA2211W THE SCHEDULED EXECUTION DATE AND TIME (DATE TIME) HAS PASSED. Explanation This message is issued after message VRA2210W and displays the DATE and TIME that the command(s) in the event were scheduled for execution. User Action You may reschedule the command(s).



VRA2212E EVENT MANAGER IS NOT ACCEPTING NEW WORK. EVENT ANALYZER IS TERMINATING.

Explanation This message is by the event analyzer when the CVSAM file scan starts. It indicates the event manager is active, but is not accepting work User Action To determine the reason this message was issued, examine the VRALOG for related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2301I EVENT SELECTED - SCHEDULED EXECUTION DATE=DATE TIME=TIME FOR USERID=USERID

Explanation This message is issued when a scheduled event is selected for processing. It identifies the event by the DATE and TIME the event is scheduled to be processed on behalf of the RACF user USERID. User Action None. This is an informational message.

VRA2302I EVENT EXECUTED - SCHEDULED EXECUTION DATE=DATE TIME=TIME FOR USERID=USERID

Explanation This message is issued when a scheduled event was processed successfully. It identifies the event by the DATE and TIME the event was scheduled to be processed on behalf of the RACF user USERID. User Action None. This is an informational message.

VRA2303E EVENT EXECUTION FAILED - SCHEDULED EXECUTION DATE=DATE TIME=TIME FOR USERID=USERID

Explanation This message is issued when a scheduled event was processed unsuccessfully. It identifies the event by the DATE and TIME the event was scheduled to be processed on behalf of the RACF user USERID. User Action To determine the nature of the failure, examine the responses for the commands in the CVSAM file, examine the VRALOG and MVS SYSLOG for related messages. Also, examine the MVS SYSLOG of the host system where the commands were executed may be helpful in determining the cause of the error. If you are certain that the problem is with ACS, Contact Vanguard Technical Support.



VRA2304I CVSAM FILE I/O ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC=CIO_RC. CIO RS=CIO_RS. VSAM RC=VSAM_RC. VSAM RS=VSAM_RS.

Explanation This message is issued by the ACS event manager subtask when a physical I/O error occurs while processing the CVSAM file. FUNCT_TYPE is the VSAM function attempted, such as OPEN or PUT. ACCESS_TYPE is the access intent for OPEN and the CVSAM record type for GET and PUT. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. VSAM_RC is the return code and VSAM_RS reason code set by MVS VSAM. User Action To determine the nature of the error described by the MVS VSAM return and reason codes, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic VSAM Macro Return and Reason Codes. Also, examine the VRALOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2305W CVSAM FILE PROCESSING ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC= CIO_RC. CIO RS=CIO_RS.

Explanation This message is issued by the ACS event manager subtask when a call to the CVSAM file interface program fails for reason(s) not related to VSAM. FUNCT_TYPE is the VSAM function attempted, such as GETNEXT or GETUPDT. ACCESS_TYPE is the CVSAM record type being accessed. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. User Action Contact Vanguard Technical Support.

VRA2306W RACROUTE VERIFY FUNC FAILED FOR USERID=USERID. SAF RC=SAF_RC. RACF RC=RACF_RC. RACF RS=RACF_RS.

Explanation The ACS event manager subtask issues this message when the security environment for the RACF User ID (USERID) could not be CREATED or DELETED (FUNC). User Action To determine the nature of the error, examine the explanations for the SAF hexadecimal return code, SAF_RC, the RACF hexadecimal return code, RACF_RC, and the RACF hexadecimal reason code, RACF_RS, in the Security Server External Security Interface (RACROUTE) Macro Reference manual in topic Return Codes and Reason Codes for chapter RACROUTE REQUEST=VERIFY. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot resolve the problem with these resources, Contact Vanguard Technical Support.



VRA2307I APPC CONVERSATION ID CID# STARTED WITH THE RACFDBID HOST FOR USERID=USERID.

Explanation The ACS event manager issues this message when a new APPC/MVS conversation is started with the ACS server. The USERID is the RACF User ID used by the ACS server to execute the commands for the scheduled event. CID# is the conversation ID assigned by the ACS event manager and only has meaning to the event manager. RACFDBID is the Vanguard RACF database ID that identifies the host where the ACS server resides. User Action None. This is an informational message.

VRA2308E COMMAND EXCEEDS MAXIMUM LENGTH OF 16384 BYTES. Explanation The ACS event manager issues this message when it finds a command record that is more than 16384 bytes long. User Action Contact Vanguard Technical Support.

VRA2309I EVENT RESTARTED - SCHEDULED EXECUTION DATE=DATE TIME=TIME FOR USERID=USERID

Explanation This message is issued when a scheduled event is restarted after ACS was terminated. It identifies the event by the DATE and TIME the event was scheduled to be executed on behalf of the RACF user USERID. User Action None. This is an informational message.

VRA2650E WORK FILE DATA SET NOT PRE-ALLOCATED AS DDNAME DDNAME FOR PROGRAM PROGNAME.

Explanation The PROGNAME program requires that DDNAME is preallocated with an MVS JCL DD statement. User Action Allocate the DDNAME and resubmit the job. If this is the ACS APPC/MVS server transaction (VRAVACS), you must rerun the APPC/MVS ATBSDFMU transaction administration utility.

VRA2651E INVALID CMD API CALL REQUEST FROM PROGRAM PROGNAME: CALLTYPE. Explanation This is an internal programming error. It indicates that program PROGNAME made a CALLTYPE request of the ACS TSO/E command interface. User Action Contact Vanguard Technical Support.



VRA2656E TSO/E SERVICE FACILITY ROUTINE (IKJEFTSR) CALL FAILED. RC=CCCC. RS=RRRRRR.

Explanation The ACS TSO/E command interface could not initialize the command environment. CCCC is the decimal return code and RRRRRR is the decimal reason code returned by the MVS IKJEFTSR service. User Action To determine the nature of the error, examine the return code's Explanation In the TSO/E Programming Services in topic Output from IKJEFTSR manual in chapter Using the TSO/E Service Facility IKJEFTSR. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2657E TSO/E SERVICE FACILITY ROUTINE (IKJEFTSR) ABEND. TYPE CODE REASON CODE RRRRRRRR.

Explanation TYPE is either USER ABEND or SYSTEM COMPLETION. CODE is Unnnn for USER ABEND or Snnn for SYSTEM COMPLETION. RRRRRRRR is the hexidecimal reason code associated with the ABEND. User Action To determine the nature of the error, examine the ABEND code's explanation in the MVS System Codes manual. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2658E STACK SERVICE SERV_TYPE FAILED. RC=CCCC. Explanation A call to the MVS TSO/E STACK CREATE or DELETE (SERV_TYPE) service failed with decimal return code CCCC. User Action To determine the nature of the error, examine the ABEND code's explanation in the TSO/E Programming Services manual in topic Return Codes from STACK. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.



VRA2660E OPEN FAILED FOR DDNAME FOR PROGRAM PROGNAME. RC=CCCC. Explanation An OPEN request for the DDNAME file by the PROGNAME program failed with decimal return code CCCC. User Action To determine the nature of the error, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic OPEN Return and Reason Codes. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2675E OPTION KEYWORD IS REQUIRED BUT IS NOT IN THE MBR MEMBER OF THE DDNAME DATA SET.

Explanation KEYWORD is a required keyword but it was not specified in the MEMBER member of the options library pointed to by the DDNAME DD statement. User Action Specify the KEYWORD option and restart ACS.

VRA2676E INVALID CMD API CALL REQUEST FROM PROGRAM PROGNAME: CALLTYPE Explanation This is an internal programming error. It indicates that program PROGNAME made a CALLTYPE request of the ACS SMF record interface. User Action Contact Vanguard Technical Support.

VRA2678E SMF RECORDING NOT ACTIVE FOR ACS_SMF_RECORD_NUMBER(NNN). SMFRTEST RC=CCCC.

Explanation An ACS program attempted to write an SMF record, but the SMF record number (NNN) is not being recorded by MVS. CCCC is the return code from the MVS SMFRTEST service. The SMF record number for ACS is specified in the ACS_SMF_RECORD_NUMBER keyword option of the VRAOPT00 member of the VANOPTS library ACS client has not been initialized. The SMF record number must also be specified in SMFPRMxx member of the SYS1.PARMLIB dataset. User Action To determine the nature of the error, examine the return code's explanation in the MVS System Management Facilities (SMF) manual in topic Return Codes for the SMFRTEST macroinstruction. If the SMFRTEST return code is 36, then SMF is not recording the ACS SMF records. Refer to the IBM MVS System Management Facilities (SMF) and the Vanguard Security Solutions Installation Guide for information on how to configure SMF to record ACS SMF records. If you cannot correct the problem with these resources, contact Vanguard Technical Support.



VRA2679E SMF RECORD WRITE FAILED. SMFWTM RC=CCCC. Explanation An ACS program could not successfully write an SMF record. CCCC is the return code from the MVS SMF SMFWTM service. User Action To determine the nature of the error, examine the return code's explanation in the MVS System Management Facilities (SMF) manual in topic Return Codes for the SMFWTM macroinstruction. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2680E THE VALUE OF THE KEYWORD OPTION MUST BE 'NO' OR NUMERICS. Explanation The value specified for the KEYWORD OPTION is not numeric or the characters NO. User Action Set the value of the KEYWORD to a numeric value or the characters NO and restart ACS.

VRA2701E INVALID APPC API CALL REQUEST FROM PROGRAME PROGRAM: REQUEST Explanation This is an internal programming error. It indicates that program PROGNAME has made an invalid request of the APPC/MVS API program. REQUEST is the invalid request code. User Action Contact Vanguard Technical Support.

VRA2702E APPC CONVERSATION START RETRY LIMIT EXCEEDED FOR CONVERSATION ID CID# WITH THE RACFDBID HOST FOR USERID=USERID.

Explanation APPC/MVS indicated that a retry could be performed after an allocation (start conversation) request failed for conversation id CID#, but the ACS_APPC_ALLOCATE_RETRIES limit was reached for this conversation. RACFDBID is the RACF database ID of the host system requested by user USERID. User Action To determine the reason this message was issued, examine the VRALOG for messages about conversation id CID# and the MVS SYSLOG for related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2703E APPC ERROR_EXTRACT FAILED FOR THE APPC_SERVICE SERVICE. RC=CCCC. RS=RRRRRRRR.

Explanation ACS attempted to retrieve information about an error that occurred during a call to the APPC/MVS APPC_SERVICE service, but the call to the ATBEES3 APPC/MVS service failed with return code CCCC and reason code RRRRRRRR. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Writing Transaction Programs for APPC/MVS manual in topic Return and Reason Codes for the



APPC/MVS Error_Extract service. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2704E APPC SERVICE APPC_SERVICE FAILED. RC=CCCC. NO FURTHER INFORMATION IS AVAILABLE.

Explanation ACS received a return code of CCCC for a call to the APPC_SERVICE APPC/MVS service, but the ATBEES3 APPC/MVS service was unable to provide more information about the nature of the error. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Writing Transaction Programs for APPC/MVS manual in topic Return and Reason Codes for the APPC/MVS APPC_SERVICE service. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2705E APPC SERVICE APPC_SERVICE FAILED. RC=CCCC. RS=RRRRRRRR. ERROR_EXTRACT INFORMATION FOLLOWS.

Explanation ACS received a return code of CCCC and reason code of RRRRRRRR for a call to the APPC_SERVICE APPC/MVS service, and the ATBEES3 APPC/MVS service was able to provide more information about the nature of the error. The information returned by the ATBEES3 APPC/MVS service follows this message. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Writing Transaction Programs for APPC/MVS manual in topic Return and Reason Codes for the APPC/MVS APPC_SERVICE service. Also, examine the VRALOG and MVS SYSLOG for related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2706E NO ENTRY FOUND IN VRATPMAP TPMAP TABLE FOR RACF DATA BASE ID RACF_DB_ID.

Explanation A scheduled command indicated that the ACS server that is to execute the command resides on the host identified with the RACF database ID RACF_DB_ID, but the VRATPMAP configuration Module did not contain a TPMAP entry for the specified RACF database ID. This message is issued when the command's event record (CVSAM record type 200) contains an invalid RACF database ID or the VRATPMAP configuration Module is incorrect. User Action Correct the RACF database ID in the scheduled command(s) event record or correct the RACF database ID.



VRA2707E THE TPMAP/TPENTRY TABLE IN LOAD MODULE VRATPMAP IS FORMATTED INCORRECTLY.

Explanation This may be caused by an error in the TPMAP and/or TPENTRY macroinstruction provided by Vanguard, or the load Module with the name VRATPMAP was not created using the Vanguard provided TPMAP and/or TPENTRY macro. User Action Recreate the VRATPMAP configuration Module and restart ACS. If the problem persists, Contact Vanguard Technical Support.

VRA2708E THERE IS NO CPIC TPENTRY IN THE TPMAP FOR RACF_DB_ID IN THE VRATPMAP TPMAP LOAD MODULE.

Explanation A scheduled command indicated that the ACS server that is to execute the command resides on the host identified with the RACF database ID RACF_DB_ID, but the VRATPMAP configuration Module TPMAP entry for RACF_DB_ID did not contain a TPENTRY TYPE=CPIC. User Action Add a TPENTRY TYPE=CPIC entry and recreate the VRATPMAP configuration Module and restart ACS. If the problem persists, Contact Vanguard Technical Support.

VRA2709E LENGTH OF DATA RECEIVED EXCEEDS THE MAXIMUM OF 16380. Explanation This is an internal ACS problem. The ACS client or server sent a block of data larger than 16380 bytes using the APPC/MVS ATBSEND service. ACS is designed to accept only one record per send/receive across the APPC/MVS connection. User Action Contact Vanguard Technical Support.

VRA2710E VRATPMAP TPMAP TABLE IS NOT AVAILABLE, BUT A COMMAND IS REQUESTING A CONNECTION TO RACF DATA BASE ID RACF_DB_ID.

Explanation A scheduled command indicated that the ACS server that is to execute the command resides on the host identified with the RACF database ID RACF_DB_ID, but the VRATPMAP configuration Module was not found. User Action Define a VRATPMAP configuration Module and make it available to the ACS client.



VRA2750E ACS SERVER OPTIONS FILE PROCESSING ERROR. RC=CCCC. Explanation The ACS server was unable to access the Administrator's OPTIONS file, VIPOPTS, to retrieve the ACS_DEBUG_SERVER keyword. CCCC has the following meanings:

Code Description 8 The VRAOPT00 member was not found in the VIPOPTS file. 12 The VIPOPTS file (DD name) was not allocated 20 The length of the value of the ACS_DEBUG_SERVER keyword

found in member VRAOPT00 of the VIPOPTS file was greater three (3) characters.

24 Internal programming error. 28 The LRECL is not 80 or the RECFM is not F or FB.

User Action The following table lists the suggested User Action for each return code:

Code User Action 8 Be sure the VIPOPTS DD statement is pointing to the correct VANOPTS

library. Create a VRAOPT00 member in the VIPOPTS file. 12 Add the VIPOPTS DD statement that points to the VANOPTS library to the

job being executed. 20 The value of the ACS_DEBUG_SERVER must be ON or OFF. 24 Contact Vanguard Technical Support. 28 Be sure the VIPOPTS DD statement is pointing to the correct VANOPTS

library. Be sure the VANOPTS library is allocated with an LRECL of 80 and with a RECFM of F or FB.

VRA2751E VANGUARD ADMINISTRATOR SERVER REQUIRES RACF VERSION 1.9.0 OR HIGHER.

Explanation Vanguard's Administrator ACS server cannot run on this MVS system. User Action None.

VRA2760I USING DEFAULT OF DEFAULT_VALUE FOR THE KEYWORD KEYWORD. Explanation This message is issued when the ACS service uses the DEFAULT_VALUE for the listed KEYWORD. User Action If the DEFAULT_VALUE is not correct in your environment, specify a value for the KEYWORD option.



VRA2761W OPTION KEYWORD IS NOT DEFINED IN THE MEMBER MEMBER OF THE DDNAME DATA SET.

Explanation This message is issued when the KEYWORD OPTION is not specified in the MEMBER member of the data set pointed to by DDNAME. User Action None. This is an informational message.

VRA2762E MEMBER MEMBERNM WAS NOT DEFINED IN THE DDNAME DATA SET. Explanation This message is issued when the MEMBER member is not found in the data set pointed to by DDNAME. User Action The MEMBER member is required for ACS to function. Correct the problem before restarting ACS.

VRA2763E THE DDNAME DATA SET IS NOT DEFINED IN THE JCL FOR THE ACS SERVER. Explanation This message is issued when the DDNAME DD statement is not specified in the JCL for executing the ACS client. User Action The DDNAME DD statement is required for ACS to function. Correct the problem before restarting ACS.

VRA2764W THE VALUE OF THE KEYWORD IS LONGER THAN NNNN CHARACTERS. Explanation This message is issued when the KEYWORD OPTION is not specified correctly. ACS will not initialize if KEYWORD is a required OPTION. If KEYWORD is not a required OPTION, the default value is used and execution continues. User Action Correct the syntax in the value of the KEYWORD OPTION and restart ACS.

VRA2765E UNSUPPORTED RETURN CODE FROM THE PROGNAME PROGRAM RC=CCCC.

Explanation Program PROGNAME passed the decimal return code CCCC that is unknown to ACS, and ACS does not know how to handle the return code. User Action Contact Vanguard Technical Support.

VRA2766W OPTION KEYWORD HAS NO DEFAULT VALUE. Explanation The KEYWORD OPTION was not specified and there is no default for this option. User Action If having no value for the KEYWORD OPTION is not correct in your environment, specify a value for the KEYWORD option.



VRA2767E VALUE IS INVALID FOR THE KEYWORD OPTION. Explanation The VALUE specified for the KEYWORD OPTION is invalid. User Action Correct the VALUE specify of the KEYWORD option.

VRA2768I THE VALUE OF THE KEYWORD OPTION MUST BE 'YES' OR 'NO'. Explanation The value specified for the KEYWORD OPTION is not YES or NO. User Action Set the value of the KEYWORD option to YES or NO.

VRA2769I THE VALUE OF THE KEYWORD OPTION MUST BE NUMERICS. Explanation The value specified for the KEYWORD OPTION is not a numeric. User Action Set the value of the KEYWORD to a numeric value.

VRA2770I THE VALUE OF THE KEYWORD OPTION MUST BE 'OFF' OR 'ON'. Explanation The value specified for the KEYWORD OPTION is not OFF or ON. User Action Set the value of the KEYWORD option to OFF or ON.

VRA2950E CVSAM FILE INITIALIZATION FAILED. THE ACS STARTED TASK IS NOT ACTIVE.

Explanation An attempt to use the Administrator to access the CVSAM file failed because the ACS task is not active on an MVS system within the GRS ring. User Action Start the ACS task within the GRS ring.

VRA2951E INVALID CIO CALL REQUEST FROM PROGRAM PROGNAME: REQUEST Explanation This is an internal programming error. It indicates that program PROGNAME has made an invalid request of the CVSAM API. REQUEST is the invalid request code. User Action Contact Vanguard Technical Support.

VRA2952E CVSAM DYNAMIC ALLOCATION FAILED. RC=CCCC. RS=RRRRRR. DYNRC=CCCC. DYNRS=RRRRRR.

Explanation An attempt to allocate the CVSAM file failed. User Action RC=4 or 8 is an internal programming error. The value of RS is only valid when RC=4. Contact Vanguard Technical Support. RC=12 is an MVS DYNALLOC error. DYNRC is the return code and DYNRS is the reason code from the MVS DYNALLOC service. Determine the nature of the error by examining the explanations of the MVS DYNALLOC service return and reason codes in the MVS



Programming: Authorized Assembler Services Guide in topic Interpreting DYNALLOC Return Codes. If you cannot correct the problem with these resources, Contact Vanguard Technical Support. If RC=16 or greater, increase the region size of the job. If the problem persists, Contact Vanguard Technical Support.

VRA2953E CVSAM GETNEXT REQUEST BUT CVSAM IS CLOSED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made a GETNEXT request of the CVSAM API, but the requesting program, PROGNAME, did not successfully OPEN the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2954E CVSAM GETNEXT REQUEST BUT THE REQUIRED BROWSE REQUEST WAS NOT ISSUED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made a GETNEXT request of the CVSAM API, but the requesting program, PROGNAME, did not make a BROWSE request first. User Action Contact Vanguard Technical Support.

VRA2955E CVSAM GET REQUEST BUT CVSAM IS CLOSED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made a GET-type request of the CVSAM API, but the requesting program, PROGNAME, did not successfully OPEN the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2956E CVSAM GET FOR UPDATE REQUEST BUT CVSAM IS CLOSED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made an UPDATE-type request of the CVSAM API, but the requesting program, PROGNAME, did not successfully OPEN the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2957E CVSAM GET FOR UPDATE REQUEST BUT CVSAM IS OPEN FOR READ-ONLY. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made an UPDATE-type request of the CVSAM API, but the requesting program, PROGNAME, OPENed the CVSAM for read-only processing.




VRA2958E CVSAM OPEN FOR READ-ONLY REQUEST BUT CVSAM IS ALREADY OPEN. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made an OPEN request for read-only of the CVSAM API, but PROGNAME had already OPENed the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2959E CVSAM OPEN FOR UDPATE REQUEST BUT CVSAM IS ALREADY OPEN. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made an OPEN request for update of the CVSAM API, but PROGNAME had already OPENed the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2960E CVSAM OPEN FAILED FOR PROGNAME. RC=CCCC. Explanation The PROGNAME program made an OPEN request to the CVSAM API, but the CVSAM file could not be OPNED. CCCC is the return code from MVS OPEN. User Action To determine the nature of the error, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic OPEN Return and Reason Codes. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2961E CVSAM BROWSE REQUESTED BUT CVSAM IS CLOSED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made a BROWSE request of the CVSAM API, but the requesting program, PROGNAME, did not successfully OPEN the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2962E CVSAM CLOSE REQUESTED BUT CVSAM WAS NOT OPEN. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. It indicates that program PROGNAME made a CLOSE request of the CVSAM API, but the CVSAM file was not OPEN. User Action Contact Vanguard Technical Support.



VRA2963E CVSAM SERIALIZATION (ENQ) FAILED. RC=CCCC. REQUESTING PROGRAM=PROGNAME.

Explanation The PROGNAME program made an OPEN or ENQ request to the CVSAM API, but the CVSAM file could not be serialized. CCCC is the return code from the MVS ENQ service. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return and Reason Codes. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2964E CVSAM CALL_TYPE REQUEST FROM PROGNAME BUT CVSAM IS NOT OPEN. Explanation This is an internal programming error. It indicates that program PROGNAME made a CALL_TYPE request of the CVSAM API, but the CVSAM file was not OPEN. User Action Contact Vanguard Technical Support.

VRA2965E CVSAM CALL_TYPE REQUEST FROM PROGNAME BUT CVSAM IS NOT OPEN FOR UPDATE ACCESS.

Explanation This is an internal programming error. It indicates that program PROGNAME made a CALL_TYPE request of the CVSAM API to update the CVSAM file, but the CVSAM file was not OPEN for update access. User Action Contact Vanguard Technical Support.

VRA2966E THE CVSAM FILE IS NOT FORMATED CORRECTLY OR HAS BEEN CORRUPTED.

Explanation This message indicates that the CVSAM file is not formatted correctly. This may occur if a non-ACS program is used to access the CVSAM file, or the CVSAM DD statement does not point to a formatted CVSAM file. User Action To determine the nature of the error, the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2967E THE CVSAM FILE WAS CREATED BY A BACK LEVEL VRA SYSTEM AND CANNOT BE ACCESSED.

Explanation This message indicates that the CVSAM file pointed to by the CVSAM DD statement is not formatted correctly for the release of the Administrator that is attempting access. User Action Format and optionally convert this CVSAM file to the level support by the release level of the Administrator you are executing.



VRA2968E VSAM ERROR ACCESSING RECORD WITH KEY CVSAM_KEY FOR PROGRAM=PROGNAME.

Explanation This is the first message of a two-part error message set. This part displays the key (CVSAM_KEY) being accessed at the time the VSAM error occurred. User Action Refer to message VRA2969.

VRA2969E RPL FEEDBACK FIELDS FOLLOW: PDFCD=PDF_CD. VSAM RC=VSAM_RC. COMPONENT CODE=COMPCODE. VSAM RS=VSAM_RS.

Explanation This is the second message of a two-part error message set. This part displays the VSAM RPL feedback information. User Action To determine the nature of the error, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic Record Management Return and Reason Codes. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2970E CVSAM LSR POOL FUNCTION FAILED. RC=CCCC. Explanation ACS received decimal return code CCCC performing VSAM LSR pool processing for the CVSAM file. FUNCTION may be BUILD or DELETE. User Action If CCCC is 4, increase the region size of the ACS client and restart the ACS client. If the problem persists, find message VRA0106E in the MVS SYSLOG and follow the User Action for message VRA0106E. If CCCC is 8, the problem is an internal programming error. Contact Vanguard Technical Support. If CCCC is 12, find message VRA0107E in the MVS SYSLOG and follow the User Action for message. VRA0107E.

VRA2971E CVSAM CALL_TYPE REQUEST FROM PROGNAME SPECIFIED KEYLEN > MAX_KEYLEN.

Explanation This is an internal programming error. The CVSAM API determined caller PROGNAME specified a key length greater than the maximum of MAX_KEYLEN for CVSAM API call type CALL_TYPE. User Action Contact Vanguard Technical Support.



VRA2972E CVSAM DD STATEMENT IS MISSING AND THE CVSAM_DATA_SET_NAME KEYWORD WAS NOT FOUND IN THE OPTIONS DATA SET.

Explanation The CVSAM API determined the CVSAM DD statement was not specified and the CVSAM_DATA_SET_NAME keyword option was not specified in the VRAOPT00 member of the VANOPTS library. User Action Code the CVSAM MVS JCL DD statement in the job or specify the CVSAM_DATA_SET_NAME keyword option and resubmit the job.

VRA2973E CVSAM CALL_TYPE REQUEST FROM PROGNAME SPECIFIED KEYLEN=0. Explanation This is an internal programming error. The CVSAM API determined caller PROGNAME specified a key length of zero for CVSAM API call type CALL_TYPE. User Action Contact Vanguard Technical Support.

VRA2974E SWAREQ RL SERVICE FAILED FOR PROGNAME. RC=CCCC. Explanation An MVS SWAREQ RL call failed during the CVSAM API initialization call issued by program PROGNAME. CCCC is the decimal return code from the MVS SWAREQ service. User Action To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return and Reason Codes for the MVS SWAREQ service. Also, examine the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2975E CVSAM CALLTYPE REQUEST FROM PROGNAME FAILED. AREALEN SPECIFIED IS TOO SMALL. KEY=CVSAM_KEY.

Explanation This is an internal programming error. The CVSAM API determined caller PROGNAME specified a data area length that is too small to contain the record with key CVSAM_KEY. User Action Contact Vanguard Technical Support.

VRA2976E CVSAM UPDATE REQUEST FROM PROGNAME FAILED. NO SUCCESSFUL GETNEXT REQUEST OR PREVIOUS GETNEXT REQUEST FAILED.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued an update request, but there was no successful GETNEXT request. User Action Contact Vanguard Technical Support.



VRA2977E CVSAM UPDATE REQUEST FROM PROGNAME FAILED. LAST SUCCESSFUL GETNEXT KEY DOES NOT MATCH THE REQUEST'S KEY.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued an update request, but the VSAM key of the record to be updated does not match the key from the previous GETNEXT request. User Action Contact Vanguard Technical Support.

VRA2978E CVSAM PUTUPDT REQUEST FROM PROGNAME BUT THERE WAS NO SUCCESSFUL GETUPDT REQUEST.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued a put update request, but there was no successful GETUPDT request. User Action Contact Vanguard Technical Support.

VRA2979I CVSAM KEYTRACE DOES NOT SUPPORT RECORD TYPE X'RECTYPE'. Explanation This is an internal programming error. The CVSAM API attempted to trace a record with a hexadecimal type field of RECTYPE. User Action Contact Vanguard Technical Support.

VRA2980I CVSAM KEYTRACE FOUND A CONTROL RECORD WITH A NON-ZERO KEY. Explanation This message indicates that the CVSAM file is corrupted. This may occur if a non-ACS program is used to access the CVSAM file. User Action To determine the nature of the error, the VRALOG and MVS SYSLOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2981E CVSAM CALL_TYPE FAILED FOR PROGNAME. THE CVSAM FILE IS ALREADY ENQUEUED BY THIS CALLER.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued an ENQEXCL, ENQSHARE, or OPEN (CALL_TYPE) request, but the CVSAM file is already ENQueued for this caller. User Action Contact Vanguard Technical Support.



VRA2982E CVSAM CALL_TYPE FAILED FOR PROGNAME. THE CVSAM FILE IS NOT ENQUEUED BY THIS CALLER.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued a DEQ or CLOSE (CALL_TYPE) request, but the CVSAM file was not ENQueued by this caller. User Action Contact Vanguard Technical Support.

VRA2983E CVSAM CALL_TYPE FAILED FOR PROGNAME. THE CVSAM FILE IS OPEN AND CANNOT BE RELEASED.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued a DEQ (CALL_TYPE) request, but the CVSAM file is still OPEN for this caller. User Action Contact Vanguard Technical Support.

VRA2984E CVSAM CALL_TYPE FAILED FOR PROGNAME. THE CVSAM FILE IS OPEN. Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued a TERM (CALL_TYPE) request, but the CVSAM file is still OPEN for this caller. User Action Contact Vanguard Technical Support.

VRA2985E CVSAM CALL_TYPE FAILED FOR PROGNAME. THE INIT CALL SPECIFIED GENVSAM=NO.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued an OPEN (CALL_TYPE) request, but the CVSAM INIT request indicated that this caller would not do I/O to the CVSAM file. User Action Contact Vanguard Technical Support.

VRA2986E MISCELLANEOUS SERVICES INIT CALL FAILED. RC=CCCC. Explanation This is an internal programming error. User Action Contact Vanguard Technical Support.

VRA2987E SMF SERVICES INIT CALL FAILED. RC=CCCC. Explanation This is an internal programming error. User Action Contact Vanguard Technical Support.



VRA2988E CVSAM DELETE REQUEST BUT CVSAM IS CLOSED. REQUESTING PROGRAM=PROGNAME.

Explanation This is an internal programming error. The CVSAM API determined that caller PROGNAME issued a DELETE request, but the CVSAM file is closed. User Action Contact Vanguard Technical Support.

VRA2989E NAME-TOKEN SERVICES FUNCTION CALL SERVICE_ID FAILED WITH RC=CCCC.

Explanation A call to the MVS Name/Token Service failed with decimal return code CCCC. The SERVICE_ID is the name of the MVS Name/Token Service that failed. User Action Return codes from 0 through 100 are MVS Name/Token Service return codes. To determine the nature of the error, examine the return code's explanation in the MVS Programming: Authorized Assembler Services Reference manual in topic Return Codes for the MVS Name/Token Service that failed. If you cannot correct the problem with these resources, Contact Vanguard Technical Support. Return codes over 100 are for Administrator detected errors. If you receive a return code over 100, Contact Vanguard Technical Support.

VRA2991E CVSAM FILE IS NOT EMPTY AND CANNOT BE INITIALIZED. Explanation An attempt was made to initialize a VSAM Cluster as a CVSAM file but the VSAM Cluster pointed to by the CVSAM DD statement is not empty. The CVSAM file initialization utility can only be executed by a VSAM Cluster that was just DEFINEd. User Action Be sure that the CVSAM DD statement points to the correct CVSAM file. If this is the correct CVSAM file, then it cannot be initialized because it contains data.

VRA2992E CVSAM FILE WAS NOT INITIALIZED. Explanation An attempt was made to initialize a VSAM Cluster as a CVSAM file but the VSAM Cluster pointed to by the CVSAM DD statement could not be initialized. User Action Be sure that the CVSAM DD statement points to the correct CVSAM file. If this is the correct CVSAM file, check the values used to DEFINE the CVSAM Cluster.



VRA2993I CVSAM FILE WAS INITIALIZED. Explanation The VSAM Cluster pointed to by the CVSAM DD statement was initialized as a CVSAM file. User Action None. This is an informational message.

VRA2994E CVSAM FILE I/O ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC=CIO_RC. CIO RS=CIO_RS. VSAM RC=VSAM_RC. VSAM RS=VSAM_RS.

Explanation This message is issued by the ACS event analyzer subtask when a physical I/O error occurs while processing the CVSAM file. FUNCT_TYPE is the VSAM function attempted, such as OPEN or PUT. ACCESS_TYPE is the access intent for OPEN and the CVSAM record type for GET and PUT. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. VSAM_RC is the return code and VSAM_RS reason code set by MVS VSAM. User Action To determine the nature of the error described by the MVS VSAM return and reason codes, examine the return code's explanation in the DFSMS/MVS Macro Instructions for Data Sets manual in topic VSAM Macro Return and Reason Codes. Also, examine the VRALOG for other related error messages. If you cannot correct the problem with these resources, Contact Vanguard Technical Support.

VRA2995E CVSAM LOGICAL RECORD ERROR DURING FUNC_TYPE FOR ACCESS_TYPE. CIO RC= CIO_RC. CIO RS=CIO_RS.

Explanation This message is issued by the ACS event analyzer subtask when an unexpected error occurs while processing the CVSAM file. FUNCT_TYPE is the VSAM function attempted, such as GETNEXT or GETUPDT. ACCESS_TYPE is the CVSAM record type being accessed. CIO_RC is the return code and should be 16. CIO_RS is the reason code set by the CVSAM API and should be a value from 1 to 16, depending on FUNC_TYPE. User Action Contact Vanguard Technical Support.

VRA2996E AN ERROR HAS OCCURRED ON YOUR COMMAND FILE Explanation It is probable that your command file is allocated too small. Especially, if you see a B37 or D37 message before the full screen error display appears. User Action Check the UNIT and SPACE allocations for your COMMAND file. Try re-allocating your COMMAND file with additional space and then retry your process starting from the Administrator Primary Panel. If this does not resolve your problem, Contact Vanguard Technical Support.



VRA4000E UNKNOWN KEYWORD - keyword Explanation An invalid keyword has been user or misspelled. User Action Correct and retry. If this does not resolve your problem, Contact Vanguard Technical Support.

VRA4001E You must have read access to the VRA$.EXREGISTR General Resource Facility to be able to use this utility.

Explanation Your user ID does not have read access to the name Facility profile. User Action Ask your System Administrator to grant you read access to this profile. Correct and retry. If this does not resolve your problem, Contact Vanguard Technical Support.

VRA4002E General Resource Platform profile not found or class not active: profile-name Explanation The general resource platform identified by profile-name in the message cannot be found or the associated class is inactive. User Action Contact your Security Administrator for assistance. If this does not resolve your problem, Contact Vanguard Technical Support.

VRA4003E You are not System Special which is required to use this utility. Explanation You must have RACF System Special authority to be able to run this utility. User Action Contact your Security Administrator to have your id changed to have System Special authority or have the Security Administrator run this utility. If this does not resolve your problem, Contact Vanguard Technical Support.

VRA4004E You are not licensed to use the Registration Manager feature of Administrator.

Explanation You must have either licensed access to Vanguard Administrator or one of the Vanguard Security on Demand products to be able to run this utility. User Action Contact Vanguard Technical Support.

VRA4006E Incompatible version of Extract Files being used. Explanation The extract files being used are not from the same version of the product as the program processing against it. User Action Correct and rerun.



VRA4007E User: racf-userid does not exist or User does not have access to: platform-name. Explanation The RACF user ID identified by racf-userid either does not exist in the RACF database or it does not have access to the General Resource platform mapping profile identified by platform-name. User Action Contact your Security Administrator for assistance. If this does not resolve your problem, Contact Vanguard Technical Support.

VRA4010E VRAAGRMA FAILED. Explanation The data gathering processed failed. User Action Contact Vanguard Technical Support.

VRA4011E SORT FAILED. Explanation The data sorting processed failed. User Action Contact Vanguard Technical Support.

VRA4012E PRINT FAILED. Explanation The data printing processed failed. User Action Contact Vanguard Technical Support.

VRA4013E START BROWSE FAILED ON 1ST RECORD OF SVSAM FILE. Explanation An error occurred in the Vanguard data access process. User Action Contact Vanguard Technical Support.

VRA4014E READ NEXT ERROR ON 1ST RECORD OF SVSAM FILE. Explanation An error occurred in the Vanguard data access process. User Action Contact Vanguard Technical Support.

VRA4015E CLOSE ERROR ON 1ST RECORD OF SVSAM FILE. Explanation An error occurred in the Vanguard data access process. User Action Contact Vanguard Technical Support.

VRA4016E NO SYSIN STATEMENTS. Explanation No SYSIN statements found. User Action Enter SYSIN statements rerun.



VRA4017E MAXIMUM NUMBER OF 35,000 SYSIN STATEMENTS EXCEEDED. Explanation Maximum number exceeded. User Action Enter less than 35,001 SYSIN statements and rerun.

VRA4018E READING SYSIN STATEMENT RETURN CODE: RC Explanation An error occurred in the Vanguard data access process. User Action Contact Vanguard Technical Support.

VRA4019E INVALID PARM FOR REPORT KEYWORD: KEYWORD Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.

VRA4020E LASTACCESSDAYS MUST BE 4 DIGITS OR LESS: XXXX Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.

VRA4021E LASTACCESSDAYS MUST BE NUMERIC: XXXX Explanation An error occurred in the Vanguard data access process. User Action Correct the SYSIN statement and rerun.

VRA4022E LASTACCESSDAYS MUST BE A NUMBER FROM 0 THROUGH 9999: XXXX Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.

VRA4023E LAST STATEMENT MUST BE REPORT(END), KEYWORD/PARM: KKKK/PPPP Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.



VRA4024E REPORT(PARM) SYSIN STATEMENT IS REQUIRED. Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.

VRA4025E CLASS(PARM) SYSIN STATEMENT IS REQUIRED. Explanation An error occurred in the Vanguard data access process. User Action Correct SYSIN statement and rerun.

VRA8000I: ERROR HAS OCCURRED WHEN PROCESSING THE FOLLOWING SEGMENT: SEGMENT-LENGTH: ‘<segment-length>’, SEGMENT-TYPE: ‘<segment-type>’, ‘<profile-type>’, PROFILE-NAME: ‘<profile-name>’

Explanation Administrator could not complete processing due to a problem with a segment type. This message displays more information for conditions related to error message VRA0806E. User Action Make note of the detail information provided in the message and call Vanguard Technical Support for further instruction.

A d m i n i s t r a t o r I S P F M e s s a g e s ( V R A M )


Chapter 8. Administrator ISPF Messages (VRAM) VRAM001 SPECIFY EITHER A RESOURCE NAME OR A PROFILE NAME.

Explanation This report requires either a General Resource or other profile name. User Action Correct and retry.

VRAM002 VSA NOT AVAILABLE THE VSA PRODUCT IS NOT AVAILABLE IN YOUR TSO SESSION.

Explanation The Vanguard Analyzer Product is not available in your TSO session. User Action Contact your System Administrator if this message is in error.

VRAM003 VSR NOT AVAILABLE THE VSR PRODUCT IS NOT AVAILABLE.

Explanation The Vanguard Advisor Product is not available in your TSO session. User Action Contact your System Administrator if this message is in error.

VRAM004 NO EXPIRED EVENTS THERE ARE NO FUTURE EVENTS THAT ARE READY FOR EXECUTION OR REVIEW.

Explanation The Vanguard Administrator’s Command Scheduler has to events to execute. User Action None.

VRAM005 EVENT SAVED THE EVENT HAS BEEN SAVED FOR LATER ACTIONS.

Explanation The Vanguard Administrator’s Command Scheduler event has been saved for later action. User Action None.



VRAM006 REMINDER SAVED THE REMINDER HAS BEEN SAVED FOR LATER ACTION.

Explanation Reminder successfully written to the Reminder table. System Action Entry added to the user's Reminder table. User Action None.

VRAM007 EXECUTION FAILED CONTACT TECHNICAL SUPPORT FOR ASSISTANCE.

Explanation Unspecified error has occurred which requires further investigation, most likely due to a VSAM file failure. System Action Message is displayed. User Action Contact Vanguard Technical Support for assistance.

VRAM009 EXECUTION COMPLETED THE EVENT HAS BEEN SUCCESSFULLY EXECUTED AND DELETED.

Explanation The Vanguard Administrator’s Command Scheduler has executed the commands and deleted User Action None.

VRAM011 COMMAND FAILED CORRECT THE COMMAND AND EXECUTE THE EVENT AGAIN

Explanation The Vanguard Administrator’s Command Scheduler failed when trying to execute commands within an event. User Action Correct and retry.

VRAM013 DAY OF MONTH INVALID NUMBER OF DAYS IN THIS MONTH EXCEEDED

Explanation The Vanguard Administrator’s Command Scheduler found the number of days in future date to be invalid. User Action Correct and retry.



VRAM015 EVENT NOT IN FUTURE THE EVENT MUST BE SCHEDULED FOR A FUTURE DATE AND TIME

Explanation The date and/or time for the Event in Vanguard Administrator’s Command Scheduler is not a future date. User Action Correct and retry.

VRAM016 HOUR OF DAY INVALID THE HOUR MUST BE BETWEEN ZERO AND 23

Explanation The hour within the time field for a Future Event, in Vanguard Administrator’s Command Scheduler, is not a value between zeroes and 23. User Action Correct and retry.

VRAM017 MINUTE OF HOUR INVALID THE MINUTE MUST BE BETWEEN ZERO AND 59

Explanation The minute within the time field for a Future Event, in Vanguard Administrator’s Command Scheduler, is not a value between zeroes and 59. User Action Correct and retry.

VRAM018 MONTH IS INVALID THE MONTH MUST BE BETWEEN ONE AND 12

Explanation The month within the date field for a Future Event, in Vanguard Administrator’s Command Scheduler, is not a value between 1 and 12. User Action Correct and retry.

VRAM019 YEAR IS INVALID THE YEAR MUST BE THE CURRENT YEAR OR GREATER

Explanation The year within the date field for a Future Event, in Vanguard Administrator’s Command Scheduler, is not a value equal to this year or greater. User Action Correct and retry.

VRAM020 DESCRIPTION BLANK YOU MUST ENTER A DESCRIPTION OF THE EVENT

Explanation The description field for a Future Event, in Vanguard Administrator’s Command Scheduler, cannot be blank. User Action Correct and retry.



VRAM021 SCHEDULER ERROR TABLE DATASET NOT ALLOCATED, YOU MUST RERUN USER INITIALIZATION

Explanation The table data set was not allocated for the Future Events, in Vanguard Administrator’s Command Scheduler. User Action Run the User Initialization function, and then rerun the Command Scheduler.

VRAM022 EVENT NUMBER INVALID EVENT NUMBER MUST BE BETWEEN 1 AND 9999

Explanation User has entered a "0" or an invalid character for the event number. System Action Message is displayed; cursor is positioned on event number prompt User Action Re-enter a valid event number.

VRAM024 DUPLICATE EVENT EVENT ALREADY EXISTS, SELECT NEW EVENT NUMBER

Explanation User has entered an event number that already exists on file. System Action Message is displayed; cursor is positioned on event number prompt User Action Re-enter a new event number.

VRAM025L YOU MUST ENTER THE NODE LABEL WHERE PROCESS WILL TAKE PLACE OR MASK

Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM026 RESOURCE UNAVAILABLE Explanation The Command Scheduler VSAM file cannot be located. System Action Command Scheduler requests cannot be processed. User Action Contact Vanguard Technical Support for assistance.

VRAM029E CIORC=XXXXXXXXXXX,CIORS = XXXXXXXXX, CIOVRC= XXXXXX, CIOVRS=XXXXXXXXXXXXX,CIOMSG=VRAXXXXE XXXXXXXXXXXXXXXXXXXXXXX. RC=XX

Explanation Command Scheduler CVSAM file failure has occurred. User Action This error will be displayed for various CVSAM file type failures; user should locate the specific error number under CIOMSG, on the second



line of this message. The CIOMSGs are described later in this manual in the Administrator Messages section beginning on page 85. These messages provide the specific reasons for the CVSAM file failure and action to be taken.

VRAM030 INVALID VALUE SPECIFY 'YES' OR 'NO'.

Explanation The value this field requires is either YES or NO. User Action Correct and retry.

VRAM030I ENTER 'Y' OR 'N' Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM030E INVALID VALUE (IF PF1 USED) - ENTER 'Y' OR 'N'

Explanation An erroneous value was entered in this field. Press F1 after error message is displayed to get a list of valid values. User Action Re-enter correct value in this field.

VRAM031 SPECIFY EITHER USERID OR GROUP NAME OR CONNECT GROUP NAME. Explanation This report requires either a User ID, or group name to process. User Action Correct and retry.

VRAM036I BLANK, “P” AND “PP” ARE AVAILABLE COMMANDS. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM036E INVALID COMMAND Explanation Command on the Option/Command line on the panel is incorrect. User Action Correct and retry.

VRAM037E INVALID FORMAT - ENTER DB2 VERSION NUMBER IN N.N FORMAT (IF PF1 IS PRESSED)

Explanation This field is either blank or the value entered does not follow the required format. User Action Re-enter DB2 Version Number in the correct format.



VRAM041E Unexpected ERROR IN REXX, CONTACT VANGUARD TECHNICAL SUPPORT. Explanation An unexpected return code was returned by REXX processing. User Action Contact Vanguard Technical Support.

VRAM050A MODULE VRAIDM1 IS NOT AUTHORIZED IN AN ISPF ENVIRONMENT. Explanation Module VRAIDM1 is not running in an authorized library. System Action Will not continue processing of the Installation Data Management. User Action Contact your system administrator.

VRAM050B VRA LICENSE HAS EXPIRED, CONTACT V.I.P. Explanation The expiration date for this license has passed. If preceding messages indicate a problem reading profiles, correct the profiles and rerun, otherwise contact VIP. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM050C VRAICMD=AAAA, BBBB, CCCC, DDDD. CONTACT V.I.P. Explanation There was an error while trying to verify if the user is authorized to access this function. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM050D RACF IS NOT ACTIVE ON THIS SYSTEM. Explanation When trying to validate the user for their authorization level for this function, it was found that RACF was not running. System Action Will not continue processing of the Installation Data Management. User Action Contact your system administrator.

VRAM050E ACEE COULD NOT BE LOCATED. Explanation When trying to validate the user for their authorization level for this function, it was unable to locate the ACEE. System Action Will not continue processing of the Installation Data Management. User Action Contact your system administrator.



VRAM050F THE PROFILE NAME ENTERED DOES NOT EXIST. Explanation The Profile Name entered by the user was not found. User Action Correct the entry and retry. If error persists, ensure that you have the profiles and/or resources defined to your system and affected users have update access to RACF. You can use the REBUILD command to define the profiles in question in order to use the Installation Data Management function. Refer to your Administrator User Guide for instructions.

VRAM050G SPECIFY THE PROFILE TO BE PROCESSED. Explanation No Profile Name was entered. User Action Correct and retry.

VRAM050H YOU ARE NOT AUTHORIZED. Explanation The user that was trying to access this Profile Name, is not authorized to do so. User Action Contact your system administrator, if it is believed that the user is authorized, if not, enter a different Profile Name and retry.

VRAM050I FUNC=F, SAF=SSSS, RC=CCCC, RSC=RRRR. CONTACT V.I.P. Explanation During the process of accessing the Installation Data on the specified profile, an unexpected error occurred. User Action Contact Vanguard Technical Support.

VRAM050J ONLY ''CANCEL' COMMAND AVAILABLE. Explanation This is the help message on the edit panel for the command line available commands.

VRAM050K ENTER EITHER 'F'ORMATTED OR 'U'NFORMATTED. Explanation The user entered an invalid Data Display function. The user is required to enter either an F for formatted display of the Installation Data, or U for the unformatted display. User Action Correct and retry.

VRAM050L THE UPDATE FUNCTION WAS CANCELED BY OPERATOR REQUEST. Explanation In either the formatted or unformatted edit panel, the user enter the command CANCEL on the command line, and this is to inform them that changes were not applied.



VRAM050M THE INSTALLATION DATA WAS SAVED INTO THE PROFILE. Explanation In either the formatted or unformatted edit panel, the user pressed the END key, and this is to inform them that changes were saved into the Installation Data for this Profile.

VRAM050N DUPLICATE CLASS" RECORD HAS BEEN FOUND.

Explanation While reading the control records from member VIPIDM00, duplicate CLASS name records were found. System Action Will not continue processing of the Installation Data Management. User Action Contact your system administrator to correct the control records.

VRAM050O DATA ENTERED IN THE FIELD(S), EXCEED THE MAXIMUM LENGTH ALLOWED Explanation This is a warning, that the data that was entered on the formatted data display was greater than the field length’s definition. User Action Correct and retry.

VRAM050P SPECIFY 'DATASET', 'GROUP', 'USER' OR A GENERAL RESOURCE CLASS. Explanation No Class Name was entered. User Action Correct and retry.

VRAM050Q SPECIFY 'DATASET', 'GROUP', 'USER' OR A GENERAL RESOURCE CLASS. Explanation This is the help message. This will appear, after the user places a question mark (?) in the Class Name field on this panel.

VRAM050R IF A DISCRETE 'DATASET' IS SPECIFIED, A VOLUME SERIAL IS REQUIRED. Explanation This is the help message. This will appear, after the user places a question mark (?) in the Volume Serial field on this panel.

VRAM050S ENTER ''CANCEL' COMMAND OR BLANKS. Explanation A command other than CANCEL was entered on the command line for the edit panel. User Action Correct and retry.

VRAM050T SPECIFY THE PROFILE TO BE PROCESSED. Explanation This is the help message. This will appear, after the user places a question mark (?) in the Profile Name field on this panel.



VRAM050U A DISCREET PROFILE REQUIRES A VOLSER. Explanation The Profile that was entered by the user, was a Discreet Dataset Profile, and requires the Volume Serial to be entered. User Action Correct and retry.

VRAM050V TABLE SEARCH ERROR Explanation An error occurred during the search of an ISPF table. User Action Contact your local ISPF support group.

VRAM050W INVALID CLASS NAME Explanation An invalid class name was entered. User Action Specify DATASET, GROUP, USER, or a General Resource class.

VRAM050X ENTER EITHER 'F'ORMATTED OR 'U'NFORMATTED. Explanation This is the help message. This will appear, after the user places a question mark (?) in the Data Display field on this panel.

VRAM050Y VIPIDM00 PARSING ERROR Explanation See messages VRAM052A through VRAM052Z for Explanations.

VRAM050Z VIPIDM00 FATAL ERROR Explanation See messages VRAM053A through VRAM053E for Explanations.

VRAM051B READ ACCESS ONLY Explanation This userid has READ access only to the Installation Data Management Area requested. User Action If you wish for this userid to have other than READ access to this particular Installation Data Management Area, it must be granted and done by someone having the authority to do so.

VRAM051A CLASS HAS NO "NAME(" CLASS CLASSNAME HAS NO "NAME(" FORMATTING CONTROL RECORDS

Explanation No NAME parameter was found within the CLASS parameter, for classname. Displayed is the data in unformatted form. User Action Correct and retry.



VRAM051W NO CLASS FORMATTING CLASS CLASSNAME HAS NO FORMATTING CONTROL RECORDS

Explanation A request for formatted installation data, but there was not control cards for that classname. Displayed is the data in unformatted form. User Action Correct and retry.

VRAM052A UNBALANCED PARENTHESIS FOUND ON LINE NUMBER NNNN Explanation There are unbalanced parenthesis are found in the VIPIDM00 member. Initial scan of the line did not find an equal number of opened and closed parenthesis. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line’s parenthesis number.

VRAM052B NO PARENTHESIS FOUND ON LINE NUMBER NNNN Explanation None. of the values on line nnnn are not in parenthesis. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line’s control record.

VRAM052C TOO MANY "CLASS" PARAMETERS FOUND ON LINE NUMBER NNNN Explanation Online nnnn, there was more than one CLASS parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052D NO "CLASS" RECORD PRECEDING THIS "NAME" ON LINE NUMBER NNNN Explanation A NAME parameter was found before a valid CLASS parameter in VIPIDM00 member. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.



VRAM052E TOO MANY "NAME" PARAMETERS FOUND ON LINE NUMBER NNNN Explanation On line nnnn, there was more than one NAME parameter was found. There should not be more than one on a single line in VIPIDM00. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052F NO "NAME" PARAMETER FOUND ON LINE NUMBER NNNN Explanation No NAME or CLASS parameter keyword was found. Either of these are required in a non-comment line of member VIPIDM00. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052G NOT ENOUGH PARENTHESIZES FOUND ON LINE NUMBER NNNN Explanation On the NAME control record, there are not enough parenthesizes to be correct. Minimum required statements for NAME must include LENGTH, and there needs to be at least four parenthesizes. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052H TOO MANY PARENTHESIZES FOUND ON LINE NUMBER NNNN Explanation On the NAME control record, there are too many parenthesizes to be correct. Maximum statements for NAME include LENGTH and INITIAL parameters, and there can only be six parenthesizes. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052I TOO MANY "LENGTH" PARAMETERS FOUND ON LINE NUMBER NNNN Explanation On line nnnn, there was more than one LENGTH parameter was found. There should not be more than one on a single line in VIPIDM00. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that



specific line. VRAM052J NO "LENGTH" PARAMETER FOUND ON LINE NUMBER NNNN

Explanation On the NAME control record, no LENGTH parameter keyword was found. This is a required parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052K "NAME" FIELD HAS MISPLACED CLOSE PARENTHESIS ON LINE NUMBER NNNN

Explanation Cannot locate the close parenthesis for the termination of the value for NAME parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052L "NAME" FIELD IS GREATER THAN 20 CHARACTERS FOUND ON LINE NUMBER NNNN

Explanation The value found for ‘NAME’ parameter was greater than the allowable 20 characters. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

RAM052M "LENGTH" FIELD HAS MISPLACED CLOSE PARENTHESIS ON LINE NUMBER NNNN

Explanation Cannot find the close parenthesis for the termination of the value for LENGTH parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052N "LENGTH" FIELD IS GREATER THAN 3 CHARACTERS ON LINE NUMBER NNNN

Explanation The value found for LENGTH was greater than the allowable 3 characters. System Action



Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052O "LENGTH" FIELD VALUE IS GREATER THAN 55, ON LINE NUMBER NNNN Explanation The LENGTH parameter’s value is greater than 55. The length of the NAME cannot exceed 55 characters. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052P "LENGTH" VALUE AND PLACEMENT TOTAL GT 255 ON LINE NUMBER NNNN Explanation The total values for all LENGTH, up to and including this line, for this CLASS exceeds the total length of 255. The Installation Data field in RACF is only 255 long. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052Q "NAME" PARAMETER RECORD HAS INVALID DATA, ON LINE NUMBER NNNN Explanation There is other data in this control record, other than NAME, INITIAL, and LENGTH parameters. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052R "INITIAL" FIELD HAS MISPLACED CLOSE PARENTHESIS ON LINE NUMBER NNNN

Explanation Cannot locate the close parenthesis for the termination of the value for INITIAL parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.



VRAM052S "INITIAL" VALUE IS GT 55 CHARACTERS ON LINE NUMBER NNNN Explanation The value found for INITIAL parameter was greater than the allowable 55-character length. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052T "INITIAL" IS GT THE "LENGTH" DEFINED ON LINE NUMBER NNNN Explanation The value found for INITIAL parameter has a length that is greater than the value contained in ‘LENGTH’. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052U "CLASS" FIELD HAS MISPLACED CLOSE PARENTHESIS ON LINE NUMBER NNNN

Explanation Cannot locate the close parenthesis for the termination of the value for CLASS parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM052V "CLASS" NAME GREATER THAN 8 CHARACTERS FOUND ON LINE NUMBER NNNN

Explanation The value found for CLASS parameter was greater than the allowable 8 characters. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.



VRAM052W "CLASS" PARAMETER RECORD HAS INVALID DATA ON LINE NUMBER NNNN Explanation There is other data in this control record, other than the CLASS parameter. System Action Will not continue processing of the Installation Data Management. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM053A BAD RETURN CODE ON OPEN: CCCCCCCC Explanation Open of the VIPOUT DD that has the PDS that contain the member VIPIDM00 failed with an unexpected return code. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM053B BAD RETURN CODE ON READ OF CCCCCCCC ON LINE NUMBER NNNN Explanation Read of a line from the VIPOUT DD that has the PDS that contain the member VIPIDM00 failed with an unexpected return code. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM053C LOGIC ERROR FOUND IN PROGRAM VRAIDM20, ON LINE NUMBER NNNN Explanation When processing this line, the program could not relocate the ‘NAME’ parameter a second time. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM053D LOGIC ERROR FOUND IN PROGRAM VRAIDM20, ON LINE NUMBER NNNN Explanation When processing this line, the program could not relocate the LENGTH parameter a second time. System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM053E LOGIC ERROR FOUND IN PROGRAM VRAIDM20, ON LINE NUMBER NNNN Explanation When processing this line, the program could not relocate the CLASS parameter a second time.



System Action Will not continue processing of the Installation Data Management. User Action Contact Vanguard Technical Support.

VRAM053G "LENGTH" FIELD VALUE IS ZERO, ON LINE NUMBER NNNN Explanation When processing this line (nnnn), the program found a LENGTH parameter that contained a length of zero. User Action Locate line number nnnn in the VIPIDM00 member, and correct that specific line.

VRAM054E - PRIMARY COMMAND FILE ALLOCATION ERROR: ************************************************** ==> DATASET: 'XXXXXXXX.XXXXXXX' ==> REASON : ERROR MESSAGE **************************************************

PLEASE VERIFY DSN AND UNIT NAME, CORRECT AND RETRY. Explanation An error occurred allocating the VRA primary command file. Action Verify dataset and unit information on the VRA Installation panel. Refer to IBM TSO/E Clist manual chapter on Determining Data Set Availability, or further details on error messages.

VRAM055E - SECONDARY COMMAND FILE ALLOCATION ERROR: ************************************************** ==> DATASET: 'XXXXXXXX.XXXXXXXXX' ==> REASON : ERROR MESSAGE **************************************************

PLEASE VERIFY DSN AND UNIT NAME, CORRECT AND RETRY. Explanation An error occurred allocating the VRA secondary command file. The secondary command file is automatically allocated when VRA is running under multiple ISPF sessions. Action Verify dataset and unit information on the VRA Installation panel. Refer to IBM TSO/E Clist manual chapter on Determining Data Set Availability, or further details on error messages.



VRAM061 NO INPUT REQUIRED NO INPUT IS REQUIRED IN THIS FIELD.

Explanation A question mark (?) was placed in this field. This help message appeared. User Action None.

VRAM062 ENTER DATASET NAME ENTER DSN OF OPTIONAL INPUT CONTROL CARDS FOR THIS RUN


VRAM063 ENTER USERID OR MASK TO GENERATE A REPORT OF PROFILES A USER(S) HAS SCOPE OVER


VRAM064 ENTER CLASS NAME OR MASK FOR USERID SCOPE REPORTS


VRAM065 ENTER GROUP OR MASK TO GENERATE A REPORT OF PROFILES A GROUP(S) HAS SCOPE OVER


VRAM066 ENTER CLASS NAME OR MASK FOR GROUP SCOPE REPORTS


VRAM067 ENTER CLASS NAME FOR REPORT OF ALL USERS THAT HAVE SCOPE

Explanation A question mark (?) was placed in this field. This help message appeared.



User Action None.

VRAM068 ENTER PROFILE OR MASK FOR REPORT OF ALL USERS THAT HAVE SCOPE


VRAM069 NO REQUEST ENTERED AT LEAST ONE OF THE FIELDS REQUIRED - USER, GROUP OR PROFILE

Explanation No data was entered into any of the fields on the panel. User Action Correct and retry.

VRAM100A INCONSISTENT ENTRIES SELECTING BOTH VOLUME AND UNIT NAMES IS INCOMPATIBLE.

Explanation The volume and unit names cannot be specified at the same time. User Action Correct and retry.

VRAM100B INVALID OPTIONENTER A VALID PROCESSING OPTION. Explanation The command option is invalid; with the only valid values can be only spaces, P, or PP. User Action Correct and retry.

VRAM100C LICENSE EXPIREDYOUR LICENSE HAS EXPIRED, CONTACT VANGUARD INTEGRITY PROFESSIONALS.

Explanation The license for the Administrator has expired. User Action Contact Vanguard Technical Support.



VRAM100D NOT AUTHORIZED YOU ARE NOT AUTHORIZED TO PERFORM THIS FUNCTION.

Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM100E INVALID DSN LEVEL DSN LEVEL CONTAINS AN INVALID CHARACTER.

Explanation The data set profile level entered has invalid characters, not allowable for standard data set naming conventions. User Action Correct and retry.

VRAM100F INVALID DSN LEVEL DSN LEVEL BEGINNING CHAR OR CHAR AFTER "." IS INVALID.

Explanation The data set profile level entered has a period (.) in the 1st or 2nd position. User Action Correct and retry.

VRAM100G INVALID DSN LEVEL DSN LEVEL CONTAINS AN IMBEDDED SPACE.

Explanation The data set profile level entered has an imbedded space within the value. User Action Correct and retry.

VRAM100H INVALID DSN LEVEL DSN LEVEL CONTAINS AN INVALID WILDCARD CHARACTER COMBINATION.

Explanation The data set profile level multiple wildcard characters within, and more than allowable. User Action Correct and retry.

VRAM100I UNKNOWN LOGIC ERROR UNKNOWN LOGIC ERROR, CONTACT VANGUARD TECH SUPPORT.

Explanation A logic error occurred when processing the data set or volume serial level entered. User Action Contact Vanguard Technical Support.



VRAM100J INVALID VOLSER LEVEL VOLSER LEVEL CONTAINS AN INVALID CHARACTER.

Explanation The volume serial level entered has invalid characters, not allowable for standard data set naming conventions. User Action Correct and retry.

VRAM100K INVALID VOLSER LEVEL VOLSER LEVEL BEGINNING CHAR OR CHAR AFTER "." IS INVALID.

Explanation The volume serial level entered has a period (.) in the 1st or 2nd position. User Action Correct and retry.

VRAM100L INVALID VOLSER LEVEL VOLSER LEVEL CONTAINS AN IMBEDDED SPACE.

Explanation The volume serial level entered has an imbedded space within the value. User Action Correct and retry.

VRAM100M INVALID VOLSER LEVEL VOLSER LEVEL CONTAINS AN INVALID WILDCARD CHAR COMBINATION.

Explanation The volume serial level multiple wildcard characters within, and more than allowable. User Action Correct and retry.

VRAM100N SYSTEM AUTHORIZATION PROGRAM "VRASPFLK" IS NOT AUTHORIZED, SEE YOUR SYSTEM PGMR.

Explanation Module VRASPFLK is not running in an authorized library. User Action Contact your System Administrator.

VRAM100O INVALID SORT SEQUENCE ENTER A VALID SORT SEQUENCE.

Explanation The initial sort sequence value is required to be either DSN, RACF, or VOLSER. User Action Correct and retry.



VRAM100P INVALID PROCESSING MODE ENTER AN "F" FOR FOREGROUND OR A "B" FOR BATCH PROCESSING.

Explanation The processing mode value is required to be either F for foreground execution, or B for batch execution of this report. User Action Correct and retry.

VRAM100Q COMMAND CONFLICTDISPLAYING TABLE IN BATCH MODE IS INCOMPATIBLE, SELECT "P" OR "PP".

Explanation The processing mode value is B, however the option needs to be P or PP for batch execution of this report. User Action Correct and retry.

VRAM110A ENTER A VALID OPTION Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM110B ENTER A DATASET NAME OR VALID DSN LEVEL Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM110C ENTER A VALID VOLSER ID Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM110D ENTER A VALID UNIT NAME Explanation This help message appears when a question mark (?) was placed in this field. User Action None.



VRAM110E ENTER THE INITIAL SORTING SEQUENCE Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM110F ENTER A "F" FOR FOREGROUND, OR A "B" FOR BATCH JCL SUBMISSION Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM120B INVALID VRAVTOC PARM VRAVTOC ERROR, CALL VANGUARD TECH SUPPORT.

Explanation A logic error occurred when processing a data set. User Action Contact Vanguard Technical Support.

VRAM120C INVALID VRAVTOC REQUEST VRAVTOC ERROR, CALL VANGUARD TECH SUPPORT.


VRAM120F INVALID UNIT NAME ENTER A VALID UNIT NAME.

Explanation The entry in the unit name field on the screen is invalid. User Action Correct and retry.

VRAM120G VOLUME NOT MOUNTED REQUESTED VOLUME IS NOT MOUNTED.

Explanation The entry in the volume serial field on the screen is not accessible, since it’s not currently mounted. User Action Correct and retry.



VRAM120I NO FILES MATCH DSN LVL NO FILES MATCH REQUESTED DSN LEVEL MASKING.

Explanation The data set name or level is not found on the system. User Action Correct and retry.

VRAM120J NO ONLINE VOLUMES THERE ARE CURRENTLY NO ONLINE VOLUMES TO REPORT.

Explanation The volume(s) are not online to verify that the data set reported is on it. User Action None.

VRAM120L UNKNOWN VRAVTOC ERROR VRAVTOC ERROR, CALL VANGUARD TECH SUPPORT.


VRAM120Q TOO MANY VOLUMES THERE ARE MORE VOLUMES THAN THE PROGRAM CAN HANDLE, CALL V.I.P.

Explanation A logic error occurred in processing. User Action Contact Vanguard Technical Support.

VRAM120R TOO MANY FILES THERE ARE MORE FILES THAN THE PROGRAM CAN HANDLE, CALL V.I.P.


VRAM120T NO RACF PROFILE THERE IS NOT A PROFILE FOR REQUESTED FILE.

Explanation The data set name requested is not found in RACF. User Action Correct as needed.



VRAM120U UNAUTHORIZED REQUEST YOU ARE NOT AUTHORIZED TO VIEW REQUESTED PROFILE.

Explanation The user is not authorized to view the RACF profile information for this data set. User Action Contact your System Administrator if this message is in error.

VRAM120W LRCMD LOGIC ERROR VTCLRCMD ERROR, CALL VANGUARD TECH SUPPORT.


VRAM120X INVALID OPTION LOGIC CALL VANGUARD TECH SUPPORT.


VRAM120Y DATA SET LIST PRINTED THE LISTING OF DATA SETS HAS BEEN PRINTED.

Explanation Listing has been processed, and report is ready to print. User Action None.

VRAM120Z PROFILE PRINTED THE PROFILE HAS BEEN PRINTED.

Explanation Listing has been processed, and report is ready to print. User Action None.

VRAM121C ALSO DISCRETE PROFILE THERE IS ALSO A DISCRETE PROFILE FOR THIS DATASET.

Explanation In processing this data set, there was found a generic profile and a discrete profile. User Action None.



VRAM121D NOT AUTH AND DISCRETE NOT AUTHORIZED TO VIEW PROFILE AND DISCRETE PROFILE EXISTS.


VRAM121E NO PROF AND DISCRETE NO GENERIC PROF EXISTS BUT DISCRETE PROF EXISTS ON ANOTHER VS.


VRAM121F PRINTED LIST WARNING THE PRINTED LISTING OF DATA SETS CONTAINS ERRORS/WARNINGS.

Explanation The report output has indications of warnings and/or errors. User Action Correct as needed.

VRAM121G SORT OPEN ERROR UNABLE TO OPEN ISPF TABLE - INCREASE TSO REGION SIZE.

Explanation ISPF table sort was attempted, but there was not enough region to complete the sort. User Action Increase the region size of the TSO session, and rerun.

VRAM121H SORT ADD ERROR SORT ADD ERROR - CHECK WORKFILE SIZES OR TSO REGION SIZE.

Explanation ISPF table insert and sort was attempted, but there was not enough region to complete the insert. User Action Increase the region size of the TSO session, and rerun.

VRAM121I INVALID RACF VERSION THE COMMAND SELECTED IS NOT SUPPORTED IN YOUR VERSION OF RACF.

Explanation The version of RACF the system is running is not supported for this report. User Action Contact your System Administrator if this message is in error.

VRAM121J VOLUMES NOT MOUNTED NO MOUNTED VOLUMES MATCHED THE REQUESTED GENERIC SEARCH.

Explanation The generic entry in the volume serial field on the screen are not accessible, since they are not currently mounted. User Action



Correct and retry. VRAM143I SHARED OPTION IS MUTUALLY EXCLUSIVE WITH AUTOUID OPTION

Explanation You specified the SHARED keyword and your default for SETAUTOUID is YES in VRAOPT00. The AUTOUID and SHARED options are mutually exclusive. User Action Either remove the SHARED keyword or change SETAUTOUID in VRAOPT00 to NO.

VRAM144I SHARED OPTION IS MUTUALLY EXCLUSIVE WITH AUTOGID OPTION Explanation You specified the SHARED keyword and your default for SETAUTOGID in VRAOPT00 is YES. The AUTOUID and SHARED options are mutually exclusive. User Action Either remove the SHARED keyword or change SETAUTOGID to in VRAOPT00 to NO.

VRAM145E BPX.NEXT.USER MISSING Explanation BPX.NEXT.USER Facility Resource does not exist and is required when using AUTOUID or AUTOGID. User Action Contact either your System or Security Administrator and request them to define a RACF profile called BPX.NEXT.USER with the proper characteristics. Instructions for setting up this profile is in the Vanguard Administrator Technical Reference Guide.

VRAM132I ENTER 'S' NEXT TO 1 OR MORE ENTRIES Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM250E INVALID BATCH/ON-LINE ENTER EITHER ''O'' FOR ON-LINE OR ''B'' FOR BATCH REPORTING.

Explanation An invalid character was entered in the Batch/Online field in the panel. User Action Correct by entering either an O for Online or B for Batch report processing, and retry.

VRAM251E BATCH CANNOT USE LIVE IT IS INVALID TO RUN THIS REPORT IN BATCH USING ''LIVE'' MODE.

Explanation Batch report processing does not allow for Live RACF access. User Action Returns Batch/On-line field to O.



VRAM252I DATA ACCESS IS LIVE DATA ACCESS MODE IS NOW RUNNING IN ''LIVE'' MODE.

Explanation The reports on this panel are now running in Live RACF Access mode. User Action None.

VRAM253I DATA ACCESS IS EXTRACT DATA ACCESS MODE IS NOW RUNNING IN ''EXTRACT'' MODE.

Explanation The reports on this panel are now running in Vanguard Extract Database mode. User Action None.

VRAM254I ENTER ONE OF THE AVAILABLE OPTIONS, LIVE, OR EXTRACT, AND PRESS ENTER.

Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM255I ENTER EITHER ''O'' FOR ON-LINE OR ''B'' FOR BATCH REPORTING. Explanation This help message appears when a question mark (?) was placed in this field. User Action None.

VRAM256I LIVE FEATURE DISABLED RACF DATABASE NOT ALLOCATED OR "LIVE" FEATURE IS DISABLED..

Explanation The user cannot enter "Live" mode. User Action If the LIVE feature is disabled, no action is necessary. If the LIVE feature is enabled, the user may not have proper access through the VRA$.LIVE.USER in the FACILITY class. The user may continue processing, but the Live facility is disabled.

VRAM300I ENTER BF, BU, D, EF, OR EU. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM301I USERDATA SAVED USERDATA AND FLAG HAS BEEN SAVED INTO THE PROFILE

Explanation In either the formatted or unformatted edit panel, the user pressed the END key, and this is to inform them that changes were saved into the UserData entry for this Profile. User Action None.

VRAM302I UPDATE CANCELLED THE UPDATE HAS CANCELLED BY OPERATOR REQUEST.

Explanation In either the formatted or unformatted edit panel, the user enter the command CANCEL on the command line, and this is to inform them that changes were not applied. User Action None.

VRAM303I ENTRY DELETED THE ENTRY HAS BEEN DELETED, AS REQUESTED

Explanation From the table list of UserNames panel, the user entered a D command, next to a row, and this is to inform them that the UserData entry for this Profile, has been deleted. User Action None.

VRAM304I USERDATA ADDED USERDATA AND FLAG HAS BEEN ADDED INTO THE PROFILE

Explanation In either the formatted or unformatted edit panel, the user pressed the END key, and this is to inform them that additions were added into the UserData entry for this Profile. User Action None.

VRAM305I SORT ?, SORT LIST, AND ADD COMMANDS ARE AVAILABLE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM306I NO USERNAMES DEFINED THERE ARE NO USERNAME ENTRIES WITHIN THIS PROFILE

Explanation The selected profile has no UserData entries. User Action None.



VRAM310E REQUESTOR UNAUTHORIZED YOU ARE NOT AUTHORIZED TO USE THIS PROGRAM

Explanation The user attempting to use this function has been found to not be authorized for it. User Action Contact your system administrator, if it is believed that the user is authorized to use this software.

VRAM311E INVALID CLASS THE CLASS SPECIFIED IS NOT ACTIVE OR IS UNDEFINED

Explanation The Class that was entered, is not active on the system, or hasn’t been defined. User Action If it is believed that this Class is correct, contact your system administrator. Otherwise, reenter the correct Class name and retry.

VRAM312E PROFILE NOT FOUND THE PROFILE SPECIFIED IS NOT FOUND IN RACF

Explanation The Profile Name entered by the user was not found. User Action Correct and retry.

VRAM313E USERNAME NOT SPECIFIED FACILITY CLASS FOR USERNAME PROFILES ARE NOT SPECIFIED, ACCESS DENIED

Explanation The user attempting to use to access a specific UserName entry, and has been found to not be authorized for it. User Action Contact your security administrator, if it is believed that the user is authorized to use.

VRAM314E LOGIC ERROR CONTACT VANGUARD TECHNICAL SUPPORT

Explanation During the process of accessing the UserData of a specified profile, an unexpected error occurred. User Action Contact Vanguard Technical Support.

VRAM315W TOO MANY USERNAMES THERE ARE MORE THAN 32 FACILITY CLASS PROFILES FOR USERNAME ACCESS

Explanation There are more than 32 UserName entries in the profile selected, that the user is authorized, by the FACILITY class profiles. User Action None.



VRAM316E NOT AUTHORIZED NOT AUTHORIZED TO ACCESS THIS PROFILE/CLASS

Explanation The user attempting to access a specific profile, and has been found to not be authorized for it. User Action Contact your security administrator, if it is believed that the user is authorized to use.

VRAM317E NO AUTHORIZATION NO AUTHORIZATION AVAILABLE TO ACCESS THE USERNAME REQUESTED

Explanation The user attempting to access a specific UserName entry, and has been found to not be authorized for it. User Action Contact your security administrator, if it is believed that the user is authorized to use.

VRAM318E INVALID VALUE VALUE FOR FLAG IS IN HEXADECIMAL REPRESENTATION

Explanation The user entered invalid UserFlag information. The user is required to enter a hexadecimal value, from 00 to FF. User Action Correct and retry.

VRAM319E ADD INVALID ADD COMMAND REQUIRES THE USERNAME.

Explanation The user entered the ADD command, without a UserName. User Action Correct and retry.

VRAM320E DUPLICATE USERNAME USERNAME THAT WAS REQUESTED TO BE ADDED, ALREADY EXISTS.

Explanation The user entered the ADD command, with a UserName that currently exists within the profile. User Action Correct and retry.

VRAM321E NOT AUTHORIZED YOU ARE NOT AUTHORIZED TO UPDATE THIS USERNAME

Explanation The user attempting to update a specific UserName entry, and has been found to be authorized as read only. User Action Contact your security administrator, if it is believed that the user is authorized to use, otherwise correct and retry.



VRAM322E VANGUARD RESERVED ENTRY VANGUARD RESERVED ENTRY. ADD, UPDATE, AND DELETE ARE DISALLOWED

Explanation The user attempted to process a UserName entry reserved by Vanguard. User Action Contact Vanguard Technical Support for further information.

VRAM323E NOT AUTHORIZED YOU ARE NOT AUTHORIZED TO DELETE THIS USERNAME

Explanation The user attempting to update a specific UserName entry, and has been found to be authorized as read only. User Action Contact your security administrator, if it is believed that the user is authorized to use, otherwise correct and retry.

VRAM324E MULTIPLE VOLUMES DISCRETE PROFILE WITH MULTIPLE VOLUMES. PLEASE ENTER A CORRECT VOLSER.

Explanation The user attempting to read a specific profile, and has been found to be one of many discrete profiles with the same name, on different volumes. User Action Enter the volume serial number of the profile to process, and retry.

VRAM325E INVALID VOLUME VOLUME SERIAL IS INVALID FOR THIS PROFILE, ENTER A CORRECT VOLSER.

Explanation The user attempting to read a specific discrete profile, and wrong volume serial was entered. User Action Enter the correct volume serial number of the profile, and retry.

VRAM328E INTERNAL ERROR UNEXPECTED RETURN CODE FROM VRAUDM20 OF NNNN

Explanation An internal error has occurred within the UserData Management function, in program VRAUDM20. User Action Contact Vanguard Technical Support.

VRAM329E INTERNAL ERROR UNEXPECTED RETURN CODE FROM VRAUDM OF NNNN

Explanation An internal error has occurred within the UserData Management function, in program VRAUDM. User Action Contact Vanguard Technical Support.

VRAM330E GENERAL PARSE ERROR EC01 VIPUDM00 UNBALANCED PARENTHESIZES FOUND ON LINE # NNNN

Explanation



On line nnnn, in VIPUDM00 member, has an unequal number of open and close parenthesizes on the control card. User Action Correct and retry.



EC02 VIPUDM00 NO PARENTHESIZES FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, has no parenthesizes in the control card. User Action Correct and retry.

VRAM331E CLASS PARSE ERROR EC01 VIPUDM00 TOO MANY "CLASS(" KEYWORDS FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there was more than one “CLASS(“ control card. User Action Correct and retry.

EC02 VIPUDM00 “CLASS(" FIELD HAS MISPLACED ")" FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, there is no close parenthesize for the “CLASS(“ control card. User Action Correct and retry.

EC03 VIPUDM00 CLASS(" PARAMETER HAS NO VALUE OR IS SPACES FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there is no value in the “CLASS(“ control card. User Action Correct and retry.

EC04 VIPUDM00 "CLASS(" VALUE IS GREATER THAN 8 CHARACTERS LONG FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than eight characters, in the “CLASS(“ control card. User Action Correct and retry.

EC05 VIPUDM00 "CLASS(" VALUE HAS LEADING OR IMBEDDED SPACES FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value that contains leading or imbedded spaces within the class name, in the “CLASS(“ control card. User Action Correct and retry.



EC06 VIPUDM00 "CLASS(" RECORD HAS INVALID DATA FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, No alphanumeric value was found in the “CLASS(“ control card’s parameter. User Action Correct and retry.

VRAM332E USERNAME PARSE ERROR EC01 VIPUDM00 NO "USERNAME(" FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there was no “USERNAME(“ control card, where one was expected. User Action Correct and retry.

EC02 VIPUDM00 TOO MANY "USERNAME(" KEYWORDS FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there was more than one “USERNAME(“ control card. User Action Correct and retry.

EC03 VIPUDM00 “USERNAME(" FIELD HAS MISPLACED ")" FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there is no close parenthesize for the “USERNAME(“ control card. User Action Correct and retry.

EC04 VIPUDM00 "USERNAME(" VALUE IS GREATER THAN 8 CHARACTERS LONG FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than eight characters, in the “USERNAME(“ control card. User Action Correct and retry.

EC05 VIPUDM00 "USERNAME(" RECORD HAS INVALID DATA FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, No alphanumeric value was found in the “USERNAME(“ control card’s parameter. User Action Correct and retry.



VRAM333E NAME PARSE ERROR EC01 VIPUDM00 NO "NAME(" FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there was no “NAME(“ control card, where one was expected. User Action Correct and retry.

EC02 VIPUDM00 TOO MANY "NAME(" KEYWORDS FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, there was more than one “NAME(“ control card. User Action Correct and retry.

EC03 VIPUDM00 “NAME(“ FIELD HAS MISPLACED “) FOUND ON LINE #NNNN Explanation On line nnnn, in VIPUDM00 member, there is no close parenthesize for the “NAME(“ control card. User Action Correct and retry.

EC04 VIPUDM00 "NAME(" VALUE IS GREATER THAN 20 CHARACTERS LONG FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than twenty characters, in the “NAME(“ control card. User Action Correct and retry.

EC05 VIPUDM00 NAME(" PARAMETER HAS NO VALUE OR IS SPACES FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there is no value in the “NAME(“ control card. User Action Correct and retry.

EC06 VIPUDM00 "NAME(" RECORD HAS INVALID DATA FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, No alphanumeric value was found in the “NAME(“ control card’s parameter. User Action Correct and retry.



VRAM334E LENGTH PARSE ERROR EC01 VIPUDM00 TOO MANY "LENGTH(" KEYWORDS FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there was more than one “LENGTH(“ keywords, found on “NAME(“ control card. User Action Correct and retry.

EC02 VIPUDM00 NO "LENGTH(" FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, there was no “LENGTH(“ control card, where one was expected. User Action Correct and retry.

EC03 VIPUDM00 “LENGTH(" FIELD HAS MISPLACED ")" FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there is no close parenthesize for the “LENGTH(“ keywords, found on “NAME(“ control card. User Action Correct and retry.

EC04 VIPUDM00 "LENGTH(" VALUE IS GREATER THAN 3 CHARACTERS LONG FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than three digits, in the “LENGTH(“ keywords, found on “NAME(“ control card. User Action Correct and retry.

EC05 VIPUDM00 "LENGTH(" VALUE IS NOT NUMERIC FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, the value in the “LENGTH(“ keywords, found on “NAME(“ control card is not numeric. User Action Correct and retry.

EC06 VIPUDM00 "LENGTH(" VALUE IS GREATER THAN 55 FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, the value in the “LENGTH(“ keywords, found on “NAME(“ control card is greater than the allowable value of 55. User Action Correct and retry.



EC07 VIPUDM00 "LENGTH(" VALUE IS ZERO FOUND ON LINE # NNNN Explanation On line nnnn, in VIPUDM00 member, the value in the “LENGTH(“ keywords, found on “NAME(“ control card is zero. User Action Correct and retry.

EC08 VIPUDM00 "LENGTH(" VALUE & PLACEMENT TOTAL GT 255 FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, the “LENGTH(“ keywords, found on “NAME(“ control card, total from prior length totals more than the 255 allowed. User Action Correct and retry.

VRAM335E INITIAL PARSE ERROR EC01 VIPUDM00 “INITIAL(" FIELD HAS MISPLACED ")" FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, there is no close parenthesize for the “INITIAL(“, found on “NAME(“ control card. User Action Correct and retry.

EC02 VIPUDM00 "INITIAL(" VALUE IS GREATER THAN 55 CHARACTERS LONG FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than 55 characters, in the “INITIAL(“, found on “NAME(“ control card. User Action Correct and retry.

EC03 VIPUDM00 "INITIAL(" VALUE GT THE "LENGTH(" PARM DEFINED FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, has a value, that is greater than “LENGTH(“, in the “INITIAL(“, found on “NAME(“ control card. User Action Correct and retry.

EC04 VIPUDM00 "INITIAL(" RECORD HAS INVALID DATA FOUND ON LINE # NNNN

Explanation On line nnnn, in VIPUDM00 member, No alphanumeric value was found in the “INITIAL(“, found on “NAME(“ control card’s parameter. User Action Correct and retry.

VRAM336E FATAL LOGIC ERROR EC01 VIPUDM00 LOGIC ERROR FOUND IN PGM VRAUDM30, FOUND ON LINE # NNNN

Explanation



Logic error in Module VRAUDM30. User Action Contact Vanguard Technical Support.

EC02 VIPUDM00 LOGIC ERROR FOUND IN PGM VRAUDM30, FOUND ON LINE # NNNN

Explanation Logic error in Module VRAUDM30. User Action Contact Vanguard Technical Support.





VRAM337E FATAL FILE ERROR EC01 VIPUDM00 BAD RETURN CODE ON OPEN: NNNNNNNN

Explanation Fatal error, when opening the VIPUDM00 member. User Action Contact Vanguard Technical Support, with this error message and return code.

EC02 VIPUDM00 BAD RETURN CODE ON READ: NNNNNNNN Explanation Fatal error, when reading the VIPUDM00 member. User Action Contact Vanguard Technical Support, with this error message and return code.

VRAM340I DISPLAY SWITCHED NO FORMATTING COMMANDS FOUND IN THE OPTIONS MEMBER VIPUDM00 FOR THIS CLASS AND USERNAME, THEREFORE THE DISPLAY HAS BEEN SWITCHED TO "UNFORMATTED".

Explanation A formatted browse or edit request was made, however there is no entry in the VIPUDM00 for the UserName and/or Class. User Action None.



VRAM341E INVALID COMMAND VALID COMMANDS ARE BROWSE, EDIT, FORMATTED, OR UNFORMATTED.

Explanation An invalid command was entered on the command like. User Action Enter one of the valid commands listed.

VRAM342E INVALID COMMAND VALID COMMANDS ARE FORMATTED, OR UNFORMATTED.

Explanation An invalid command was entered on the command like. User Action Enter one of the valid commands listed.

VRAM343I VALID COMMANDS ARE BROWSE, EDIT, FORMATTED, OR UNFORMATTED. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM344I VALID COMMANDS ARE FORMATTED, OR UNFORMATTED. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM345E EDIT NOT ALLOWED YOU ARE NOT ALLOWED TO UPDATE THIS USRDATA FIELD. CONTACT YOUR SECURITY ADMINISTRATOR FOR MORE INFORMATION.

Explanation The user attempting to edit the UserData entry, has been found to not to be authorized for it. User Action Contact your system administrator, if it is believed that the user is authorized to use this function.

VRAM346W DATA TRUNCATED THE DATA ENTERED IN ONE (OR MORE) OF THE FIELDS EXCEEDED THE MAXIMUM ALLOWED AND HAS BEEN TRUNCATED.

Explanation The data entered in the field, was greater than defined. User Action Review the results on the panel, to insure that data required, still appears.

VRAM415W CERTDATA SEGMENT TRUNCATED TO 1023 CHARACTERS. CLASS = DIGTCERT ENTITY = ‘PROFILE NAME’

Explanation Digital Certificate data too long to display. User Action None.



VRAM416W DIGITAL CERTIFICATE NAME DATA TRUNCATED TO 246 CHARACTERS. USER PROFILE = ‘USERID’

Explanation Digital Certificate data too long to display. User Action None.

VRAM500I VRA EXPIRES IN NN DAYS. YOUR LICENSE WILL EXPIRE IN NN DAYS, CONTACT V.I.P.

Explanation Your license to use Administrator will expire in nn days. User Action Your VRA Administrator should contact Vanguard to obtain a new datecode.

VRAM501I 'SORT ?, SORT LIST, AND L ? COMMANDS ARE AVAILABLE. Explanation A Question mark (?) was entered into this field, this is a help message. User Action None.

VRAM502I 'SPECIFY Y, OR N.’ Explanation A Question mark (?) or Invalid Data was entered into this field, this is a help message User Action None.

VRAM503I 'VALID AUTHORITY: USE, CREATE, CONNECT, OR JOIN. Explanation A Question mark (?) or Invalid Data was entered into this field, this is a help message. User Action None.

VRAM504I 'ENTER A VALID USERID ' Explanation Userid must be entered to process report. User Action Enter Userid and retry.

VRAM505I 'ENTER A VALID GROUP ' Explanation A Question mark (?) or Invalid Data was entered into this field, this is a help message User Action None.

VRAM506I 'ENTER PROCESS: L (LIST), C (CONNECT), R (REMOVE) ' Explanation A Question mark (?) or Invalid Data was entered into this field, this is a help message User Action



None. VRAM507I 'ENTER Y OR DATE MM/DD/CCYY. (RESUME=Y WILL CLEAR

REVOKE/RESUME SETTINGS)' Explanation A Question mark (?) or Invalid Data was entered into this field, this is a help message. User Action Correct and retry.

VRAM508I 'REVOKE AND RESUME CANNOT EQUAL Y, AT THE SAME TIME' Explanation Revoke and Resume setting cannot be processed at the same time. User Action Correct and retry.

VRAM509E 'INVALID DATA SPECIFIED IN MM/DD/CCYY DATE FIELD.' Explanation Invalid Data was entered into this field. User Action Correct and retry.

VRAM680I ENTER S, CL, BCL, DL, BDL, RB, BRB, VRC, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM681I ENTER VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM682I ENTER S, RA, BRA, VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM683I ENTER RD, BRD, RB, BRB, VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM684I GROUP WAS NOT FOUND AS A RACF GROUP. Explanation The requested group profile is not found. User Action Correct and retry.



VRAM685I USER WAS NOT FOUND AS A RACF USERID. Explanation The requested group profile is not found. User Action Correct and retry.

VRAM687I ENTER CL, BCL, DL, BDL, VRC, LR, LV, EF, EU OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM690I ENTER CL, BCL, DL, BDL, VRC, LR, LV, EF OR EU. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM691I ? AND PRNT COMMANDS ARE AVAILABLE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM692I ENTER RU, BRU, VRC, LR OR LV. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM695I ENTER CL, BCL, DL, BDL, VRC, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM696I ENTER S, CL, BCL, DL, BDL, VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM697I ENTER S, RB, BRB, VRC, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM698I ENTER S, VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM699I ENTER CL, BCL, DL, BDL, RB, BRB, VRC, LR, LV OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM700I OPTION 4 USES GROUP: MASKING FIELD ONLY. Explanation For this report, only this field is allowed to be for masking/selection. User Action Correct and retry.

VRAM701E NOT A VALID COMMAND. SORT ?, SORT LIST, CMDSHOW, L ? AND PRNT COMMANDS ARE AVAILABLE.

Explanation Command on the Option/Command line on the panel is incorrect. User Action Correct and retry.

VRAM701I SORT ?, SORT LIST, CMDSHOW, L ? AND PRNT COMMANDS ARE AVAILABLE.

Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM703I SORT ?, SORT LIST, CMDSHOW, L ?, PRNT, “PRNT EXPLODE", EMAIL, AND “EMAIL EXPLODE” COMMANDS ARE AVAILABLE.


VRAM704I SORT ?, SORT LIST, L ?, PRNT, AND REBUILD COMMANDS ARE AVAILABLE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM705I SORT ?, SORT LIST, CMDSHOW, L ?, PRNT, REBUILD, AND EXCLUDE COMMANDS ARE AVAILABLE.


VRAM706I SORT ?, SORT LIST, CMDSHOW, L ?, PRNT, AND "PRNT SCOPE" COMMANDS ARE AVAILABLE.




VRAM709I OPTION 3 USES USERID: MASKING FIELD ONLY. Explanation For this report, only this field is allowed to be for masking/selection. User Action Correct and retry.

VRAM710E DUPLICATE SEQUENCE NUMBERS ARE NOT ALLOWED. Explanation In the SORT LIST panel, in sort sequence column, there is a duplicate of the sort sequencing number. User Action Correct and retry.

VRAM711I ENTER ONE OF THE AVAILABLE OPTIONS AND PRESS ENTER. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM713I INVALID SORT PARAMETER. Explanation In the SORT columnname command, the columnname is not one that is highlighted as a column heading, and is invalid for the sort. User Action Correct and retry.

VRAM714I NOT VALID WHEN SELECTING OPTION 4. Explanation For this report, this field is not allowed for masking/selection. User Action Correct and retry.

VRAM715I MASTER, ALL AND INFO MUST BE SPECIFIED BY THEMSELVES. Explanation The MASTER, ALL, and INFO masking fields for Console Authority are mutually exclusive, so the current masking is invalid. User Action Correct and retry.

VRAM716I ALL MUST BE SPECIFIED BY ITSELF. Explanation The ALL masking Console Message Level is mutually exclusive to the other masking fields. User Action Correct and retry.

VRAM717I NOT VALID WHEN SELECTING OPTION 1, 2 OR 3. Explanation For these report, this field is not allowed for masking/selection. User Action Correct and retry.



VRAM718I NOT A VALID COMMAND THE COMMAND ENTERED IS NOT SUPPORTED.




VRAM721E NOT VALID WHEN SELECTING OPTION X. Explanation The option that was selected is not valid for this panel. User Action Correct and retry.

VRAM721I ENTER LR TO ISSUE LIST RACF COMMAND OR LV TO LIST VRA VSAM INFO. Explanation For this line selection option, these are the only ones available. User Action Correct and retry.

VRAM722I SPECIFY A OR D FOR SORT SEQUENCE. Explanation The sort sequence selected is invalid. User Action Correct by making the sort sequence either A for ascending or D for descending, and retry.

VRAM723I SPECIFY * OR A DATASET PROFILE NAME. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM724I THERE ARE NO COMMANDS AVAILABLE FROM THE COMMAND LINE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM726I USERID NOT FOUND. Explanation The User ID requested was not found. User Action Correct and retry.

VRAM727I GROUP NOT FOUND. Explanation The group requested was not found. User Action Correct and retry.

VRAM728I DATASET NOT FOUND. Explanation The data set requested was not found. User Action Correct and retry.

VRAM729I GENERAL RESOURCE NOT FOUND. Explanation The resource requested was not found. User Action Correct and retry.


VRAM730I SPECIFY *, N(NONE.), R(READ), C(CONTROL), U(UPDATE) OR A(ALTER). Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM73IE PROFILE NOT FOUND OR UNAUTHORIZED TO LIST PROFILE. Explanation The profile selected for the LR line command, is not found in the RACF database, or the user is not authorized to view it. User Action Contact your System Administrator if this message is in error.

VRAM732E INVALID COMMAND SYNTAX. Explanation The attempt to do the LR line command failed due to a syntax error. User Action Contact Vanguard Technical Support.



VRAM733E CLIST SYSTEM ERROR. Explanation The attempt to do the LR line command failed to some unexpected error. User Action Contact Vanguard Technical Support.

VRAM734I ID IS OBSOLETE. Explanation The Id selected with the line command is not found as a group or user profile. User Action Contact your System Administrator if this message is in error.

VRAM736I SPECIFY *, G (GENERIC) OR D (DISCRETE). Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM737I SPECIFY *, N(NONE.), R(READ), E(EXECUTE), C(CONTROL), U(UPDATE) OR A(ALTER).

Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM738I SPECIFY *, M(MODEL), T(TAPE) OR V(VSAM). Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.


VRAM740E ID NOT FOUND ID WAS NOT FOUND AS A RACF USERID OR GROUP.

Explanation The Id selected with the line command is not found as a group or user profile. User Action Contact your System Administrator if this message is in error.

VRAM741I NOT A GROUP Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.



VRAM742I OBSOLETE ID. Explanation The Id selected with the line command is not found as a group or user profile. User Action Contact your System Administrator if this message is in error.

VRAM743I SPECIFY *, N OR Y. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM744I SORT ?, SORT LIST, L ?, PRNT, "PRNT AL" AND "PRNT AL AND CMDSHOW COMMANDS ARE AVAILABLE.


VRAM745I SPECIFY EQ, GT, NE, OR LT. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM746I SPECIFY * OR A DATE IN THE FORMAT MM/DD/YY. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM747I TSO REGION SIZE MUST BE NUMERIC. Explanation For this selection/masking field, the data needs to be numeric. User Action Correct by using a numeric value or an asterisk (*), and retry.



VRAM749E ONLY USERID AND HARD REVOKE FIELDS ARE VALID WHEN SELECTING OPTION 7.

Explanation For this report, only these fields are allowed for masking/selection. User Action Correct by using the allowable values listed in the message, and retry.

VRAM749I ONLY USERID IS VALID WHEN SELECTING OPTION 5. Explanation For this report, only this field is allowed for masking/selection. User Action Correct by using the allowable values listed in the message, and retry.

VRAM750I USERID=USERID, USER NAME=NAME Explanation This userid was selected to display the id’s name. User Action None, since this is information requested by the user.

VRAM751I SPECIFY N(NONE.), E(EXECUTE), R(READ), U(UPDATE), C(CONTROL) OR A(ALTER).


VRAM752I LT IS INVALID WHEN SPECIFYING UACC=N. Explanation There is nothing less than the none value in the UACC, so this selection/masking criteria is invalid. User Action Correct and retry.

VRAM753I GT IS INVALID WHEN SPECIFYING UACC=A. Explanation There is nothing greater than the Alter value in the UACC, so this selection/masking criteria is invalid. User Action Correct and retry.

VRAM754E EMAIL ALLOCATION ERROR Explanation Verify UNIT and SPACE allocations are valid for your EMAIL work file. User Action Enter the EMAIL command after generating a report, then issue the OPTIONS command and verify the UNIT and SPACE parameters are valid.



VRAM754I THIS FIELD IS ONLY VALID WHEN SELECTING OPTION 1. Explanation For this masking/selection field, only this option is allowed. User Action Correct and retry.

VRAM755E HARDCOPY PRINT ERROR - UNSUCCESSFUL COMPLETION. Explanation An error occurred when doing the PRNT command. User Action Contact your System Administrator to correct the problem.

VRAM756E EMAIL ERROR Explanation Contact Tech Support - Module xxx - Function Code xxx - Return Code - xxx. User Action A severe error has occurred doing an Email function. Contact Tech Support with supporting details displayed in message.

VRAM756I HARDCOPY PRINT COMPLETED. Explanation The PRNT completed successfully. User Action None.

VRAM757I BLOCK COMMAND IS PENDING xxx block line command is awaiting another xxx to be entered. Explanation A block line command (xxx) was entered, but the matching command hasn’t been placed, before the enter key was pressed. User Action Correct and retry.

VRAM758I SORT CANNOT BE COMPLETED DUE TO PENDING BLOCK LINE COMMANDS. Explanation A block line command (xxx) was entered, but the matching command hasn’t been placed, and a SORT command was entered. User Action Correct by removing the incomplete block command or the SORT command, and retry.

VRAM760E CMDFILE IS NOT CATALOGED. Explanation The Obsolete command file does not exist. User Action Correct by running the Obsolete job, and retry.



VRAM761E LICENSE HAS EXPIRED, CONTACT V.I.P. Explanation The license for the Administrator has expired. User Action Contact Vanguard Technical Support.

VRAM762E USER IS NOT AUTHORIZED TO EXECUTE THIS FUNCTION. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator to be authorized.

VRAM763E USER IS NOT AUTHORIZED TO EXECUTE COMMAND FUNCTIONS. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator to be authorized.

VRAM764E ACCESS DENIED - USER NOT AUTHORIZED. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM765E YOU ARE NOT AUTHORIZED TO ACCESS THIS USERID. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM766E YOU ARE NOT AUTHORIZED TO ACCESS THIS GROUP. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM767E YOU ARE NOT AUTHORIZED TO ACCESS THIS GENERAL RESOURCE. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM768E YOU ARE NOT AUTHORIZED TO ACCESS THIS DATASET. Explanation This user is not authorized to perform this function. User Action Contact your System Administrator.

VRAM769E COMMANDS NOT VALID FOR *. Explanation The line command attempted is invalid, since the profile is an *. User Action This profile cannot be select, however no action can be taken.



VRAM769I COMMANDS NOT VALID FOR *. Explanation The line command attempted is invalid, since the profile is an *. User Action This profile cannot be select, however no action can be taken.

VRAM770E LR IS NOT SUPPORTED FOR THIS CLASS WITH A SINGLE *. Explanation The list command for the PROGRAM and RACFVARS classes with a single asterisk is not supported. User Action None.

VRAM771E REPORTS REQUIRE AN ACTUAL CLASS TO BE SPECIFIED, * NOT ALLOWED. Explanation The SYSOUT=* having an output class of * is not valid for on-line report processing. User Action Correct and retry.

VRAM772E SYSOUTDSN IS NOT CATALOGED. Explanation The data set (sysoutdsn) that is indicated to be used for the on-line report output is not cataloged. User Action Correct and retry.

VRAM773E SYSINDSN IS NOT CATALOGED. Explanation The data set (sysindsn) as control card input to the Access List Anomaly Analysis process does not exist. User Action Correct and retry.

VRAM774E SYSOUTDSN MUST HAVE LRECL=133 AND RECFM=FB OR FBA. Explanation The data set (sysoutdsn) that is indicated to be used for the on-line report output does not have the correct record length and/or format. User Action Correct and retry.

VRAM775E SYSINDSN MUST HAVE LRECL=80 AND RECFM=FB. Explanation The data set (sysindsn) as control card input to the Access List Anomaly Analysis process does not have the correct record length and/or format. User Action Correct and retry.



VRAM778E SYSOUTDSN HAS BEEN MIGRATED, RECALL AND TRY AGAIN. Explanation The data set (sysoutdsn) that is indicated to be used for the on-line report output has been migrated. User Action Correct and retry.

VRAM780I ENTER A FULLY QUALIFIED RACF USERID OR GROUP. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM781I SPECIFY S, RN, BRN, VRC, LR OR LV. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM782I SPECIFY RO, VRC, LRO, LVO, LR, OR LV.' Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

V RAM783I SPECIFY CL, BCL, DL, BDL, RT, BRT, RB, BRB, VRC, LR OR LV. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM784I SPECIFY RD, BRD, RB, BRB, VRC, LR OR LV. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM787I ENTER S, SYS, CL, BCL, DL, BDL, RB, BRB, VRC, LR, LV, OR ‘/’ LINE COMMAND.


VRAM788I ENTER S, CL, BCL, DL, BDL, RB, BRB, VRC, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM791I ENTER S, ML OR ‘/’ LINE COMMAND TO DISPLAY INFORMATION. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM792I ENTER LR, LV, VRC,OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM793I ENTER D, R, U, LR, LV, VRC, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM794I ENTER S, CL, BCL, DL, BDL, AL, VRC, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM801I NOT A VALID LINE COMMAND. Explanation The line command is not a valid in this process. User Action Place a question mark (?) in the line command, and press enter. This will list the valid commands that can be processed.

VRAM802I NO SYSTEMS ASSOCIATED WITH THIS USERID. Explanation Request for more data for this line OPERPARM item using line command SYS, finds that there is no data to be displayed. User Action None.

VRAM803I APPLICABLE FOR REASON CONNECT AND COND ACCESS ONLY. Explanation The S line command on the Cross Reference line item cannot display the item, since it’s reason is neither CONNECT or COND ACCESS. User Action None.

VRAM804I INVALID REQUEST. USERID DOES NOT HAVE GROUP SPECIAL FOR THIS SELECTION.

Explanation The User ID selected does not have group special. User Action Correct and retry.

VRAM805I NOT DISCRETE PROFILE Dataset profile is not discrete therefore it cannot be processed.



Explanation The line command used for converting a discrete data set profile to generic (CV), but the data set profile was not discrete. User Action Correct and retry.

VRAM806I NO ERROR MESSAGE There is no error message for this report entry. Explanation The line command to view the error message(s) was entered, however there was no error messages for this item. User Action None.

VRAM807I APPLICABLE FOR REASON ACCESS AND COND ACCESS ONLY. Explanation The ML line command on the Cross Reference line item cannot display the item, since it’s reason is either ACCESS or COND ACCESS. User Action None.

VRAM808I DATASET CLASSES DO NOT HAVE MEMBERS. Explanation The ML line command on the Cross Reference line item cannot display the item, since it’s a data set profile, and they don’t have members. User Action Correct and retry.

VRAM809I DATASET PROFILE HAS AN ERROR MESSAGE THEREFORE IT CANNOT BE PROCESSED.

Explanation The data set selected with the CV line command, has errors and cannot be processed. User Action Correct and retry.

VRAM810I SPECIFY NOCLAUTH, CLAUTH OR A RACF CLASS. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM811I ONLY USERID IS VALID WHEN SELECTING OPTION 2. Explanation For this report, only this field is allowed for masking/selection. User Action Correct by using the allowable values listed in the message, and retry.



VRAM812I SPECIFY *, S OR N. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM813I SPECIFY *, A, N OR O. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM814I SPECIFY *, A, N OR Y. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM815I SPECIFY N OR Y. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM816I SPECIFY * OR A NUMBER FROM 0-254. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.


VRAM819I SPECIFY *, U(USE), O(CONNECT), C(CREATE), OR J(JOIN) Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM820I SPECIFY * OR A DATA STRING. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM821I SPECIFY N OR Y. IF SPECIFIED, YOU MUST ALSO SPECIFY DISCRETE PROFILE.


VRAM822I WHEN SHOW ERRORS ONLY = Y THEN GENERIC/DISCRETE MUST BE D. Explanation Two of the masking/selection fields have a conflict that needs to be resolved. User Action Correct and retry.

VRAM823I PROFILE AND MEMBER CANNOT BE SPECIFIED TOGETHER. Explanation Two of the masking/selection fields have a conflict that needs to be resolved. User Action Correct and retry.

VRAM824E SCOPING: USERID NOT FOUND IN EXTRACTED FILES - ACCESS DENIED. Explanation The current user cannot use Administrator, if their Id was created after the creation of the current Extract database. User Action Run the Extract process, and sign on again.

VRAM825E FAILURE WHEN ATTEMPTING TO RETRIEVE ACEE USERID, CALL VANGUARD.

Explanation Administrator attempted to find the current user in the ACEE, and failed. User Action Contact Vanguard Technical Support.

VRAM826E SCOPING: EXTRACTED FILES CONTAIN NO STATUS RECORDS - ACCESS DENIED.

Explanation The status records from the Extract process do not exist. User Action Re-run the Extract process, and sign on again. If the problem persists, Contact Vanguard Technical Support.

VRAM827E SCOPING: SEVERE VSAM I/O ERROR. Explanation An unexpected error occurred while processing the VSAM Extract database. User Action Re-run the Administrator Extract process again and insure that it completes successfully.



VRAM828E SCOPING: COMPARE TABLE FULL - THIS USER HAS TOO MANY 950 RECORDS.

Explanation The capacity of an internal table has been exceeded. User Action Contact Vanguard Technical Support.

VRAM829E SCOPING NOT IN EFFECT - CANNOT GENERATE REPORT. Explanation An unexpected error occurred while processing the VSAM Extract database. User Action Re-run the Administrator Extract process again and insure that it completes successfully.

VRAM839I SORT COMPLETED Explanation The SORT command completed successfully. User Action None.

VRAM840E INVALID CLASS TAPEVOL RESOURCE CLASS IS INVALID FOR THIS FUNCTION.

Explanation A Clone or Block Clone Request was attempted for a TAPEVOL resource entity, primary or secondary. This is no longer allowed. User Action The same results can be achieved by running a Rebuild command on the model TAPEVOL entity, modifying the entity name(s) prior to execution.

VRAM840W SOME CMDS SKPD. NO COMMANDS GENERATED FOR DIGTCERT, DIGTRING AND DIGTNMAP CLASSES.

Explanation During mass Rebuild process, the profiles in these classes were skipped during command generation. User Action None.


VRAM842C INVALID MONTH SPECIFIED IN MM/DD/YYYY DATE FORMAT FIELD. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.



VRAM842I INVALID MONTH SPECIFIED IN MM/DD/YY DATE FORMAT FIELD. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM843C INVALID DAY SPECIFIED IN MM/DD/YYYY DATE FIELD. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM843I INVALID DAY SPECIFIED IN MM/DD/YY DATE FIELD. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM844I INVALID YEAR SPECIFIED IN MM/DD/YY DATE FIELD. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM845I ONLY ID AND OMVSID ARE VALID WHEN SELECTING OPTION 2. Explanation For this report, only these field are allowed for masking/selection. User Action Correct by using the allowable fields listed in the message, and retry.

VRAM846I USERID THAT ISSUED THE HARD REVOKE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM847I ENTER Y OR N. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.



VRAM848I NOT VALID WHEN SELECTING OPTION 1 OR 2. Explanation For this selection/masking field, the data entered was not valid. User Action Correct by using the allowable values listed in the message, and retry.

VRAM849I ENTER U, D OR R. U IS FOR USER REPORTS, D IS FOR DATASET REPORTS AND R IS FOR RESOURCE.


VRAM851I SPECIFY A RACF USERID, GROUP, OR * TO REPORT ON ALL WITHIN ID TYPE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM852I SPECIFY REPORT TYPE U, G, OR *. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM853I WHEN ID TYPE IS * , ID NAME IS IGNORED. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM854I SYNTAX ERROR OR DATA ENTERED BEYOND COL 71 IN OPTIONS-LIB(VRAEXCLD).

Explanation In the member in the options library has data that goes beyond column 72. User Action Correct and retry.

VRAM855I ERROR IN OPTIONS-LIB(VRAEXCLD), MAX 10 GROUPS PER LINE WERE EXCEEDED.'

Explanation In the member in the options library has more than 10 group in single entry. User Action Correct and retry.



VRAM856I ERROR IN OPTIONS-LIB(VRAEXCLD), MAX 50 EXCLUDE GROUPS WERE EXCEEDED.

Explanation In the member in the options library has more than 50 group total for all entries. User Action Correct and retry.

VRAM857I SPECIFY * OR A NUMBER FROM 0-9959. Explanation For this report, only this field is allowed for masking/selection. User Action Correct by using the allowable values listed in the message, and retry.

VRAM876I ENTER S OR D. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM879I SORT ?, SORT LIST, L ?, PRINT, RESET, AND SHIFT COMMANDS ARE ALLOWED.


VRAM880I ENTER S, CL, BCL, DL, BDL, RB, BRB, VRC, VSR, LR, LV, OR ‘/’ LINE COMMAND.


VRAM881I ENTER S, CL, BCL, DL, BDL, BCV, CV, BRB, RB, VRC, VSR, LR, LRD, LV OR ‘/’ LINE COMMAND.


VRAM882I ENTER S, CL, BCL, DL, BDL, VRC, VSR, LR, LV, OR ‘/’ LINE COMMAND. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM883I ENTER CL, BCL, DL, BDL, VRC, VSR, LR, LV, OR ‘/’. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRAM884I ENTER CL, BCL, DL, BDL, VRC, VSR, LR, LV, EF, EU OR ‘/’. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM885I ENTER RB, BRB, RC, BRC, VRC, VSR, LR, LV, OR ‘/’. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM900A ENTER ONE OF THE AVAILABLE OPTIONS AND PRESS ''ENTER''. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM900B PRESS ''ENTER'' TO END AND SAVE OR ''END'' TO END AND NOSAVE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM900C SPECIFY JOB CONTROL STATEMENTS. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM900D SPECIFY ''SYSOUT=X'' OR A FULLY QUALIFIED DATA SET (WITHOUT QUOTES).


VRAM900E SPECIFY A FULLY QUALIFIED DATA SET (WITHOUT QUOTES). Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM900F SPECIFY A WORK DATA SET PREFIX OR LEAVE BLANK TO USE YOUR USERID.




VRAM900I INITIALIZATION OPTIONS HAVE BEEN SAVED. Explanation The Initialization options have been successfully saved. User Action None.

VRAM900J INITIALIZATION OPTIONS PROCESSING CANCELED BY OPERATOR REQUEST.

Explanation The Initialization options have not been saved, cancelled by the user. User Action None.

VRAM901I LINE COMMANDS FROM PRIOR PANEL FOLLOWING DRILLDOWN CMDS ARE IGNORED.

Explanation A regular line command or drilldown command has been issued following a drilldown selection. This is currently not supported. Line commands or drilldown commands issued on the same panel following a drilldown command will be ignored. User Action Re-issue ignored line commands on a panel without mixing with drilldown commands.

VRAM902I PROFILE COMMANDS ARE ONLY VALID FOR DATASETS AND GENERAL RESOURCES.

Explanation The Profile Access List command (PA), the Profile Conditional Access List command (PC) and the Profile Summary command (PS) only apply to Datasets and General Resources. User Action None.

VRAM919I THERE ARE NO PRIMARY COMMANDS AVAILABLE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRAM919E INVALID COMMAND THERE ARE NO PRIMARY COMMANDS AVAILABLE.




VRAM920E SEVERE ERROR DURING JCL FILE TAILORING ON DATASET WHILE TAILORING MEMBER FOR...

Explanation A JCL dataset member is open. User Action If you are editing the JCL in split screen mode, terminate your other session and try again. Check your dataset allocation. Verify that the UNIT parameter is correct and check your SMS STORCLAS, DATACLAS and MGMTCLAS parameters. If the error continues, Contact Vanguard Technical Support.

V R C M e s s a g e s ( V R C M )


VRC Messages (VRCM) VRCM100E THERE IS NO CONFIGURATION FOR THIS PANEL.

Explanation Configuration of this panel is not supported. User Action Correct and retry.

VRCM101E THIS TITLE CANNOT BE TURNED "OFF". Explanation This is a required field in the displays and cannot be turned off. User Action Correct and retry.

VRCM102E HIGHER LEVEL TITLE MUST BE TURNED "ON". Explanation The higher-level field must be turned on to turn on this field. User Action Correct and retry.

VRCM103E RACF HELP NOT INSTALLED IN "SYSHELP". Explanation RACF help facility has not been installed, or is not available for this field. User Action Contact your system administrator.

VRCM104E THERE IS NO HELP AVAILABLE FOR THIS USER DEFINED FIELD. Explanation Your installation has not provided a customized field description for this field. User Action Contact your system administrator.

VRCM105E PLEASE PLACE CURSOR IN AN INPUT FIELD AND TRY AGAIN. Explanation The cursor is not positioned in a valid input field. User Action Position the cursor on a valid input field.

VRCM106E THE COMMAND ENTERED IS INVALID, PLEASE CORRECT. Explanation The user entered an invalid command. User Action Correct and retry.

VRCM107E SCROLLING LEFT IS NOT ALLOWED. Explanation This panel does not allow left scrolling. User Action Correct and retry.



VRCM108E SCROLLING RIGHT IS NOT ALLOWED. Explanation This panel does not allow right scrolling. User Action Correct and retry.

VRCM109E DEFAULTS WERE NOT FOUND OR WERE INVALID. Explanation The ISPF profile dataset member that matches the current version) does not exist or is invalid. User Action If the error persists, delete the ISPF profile dataset member and rerun. If the error still persists, Contact Vanguard Technical Support.

VRCM110E INPUT IS INVALID AT CURSOR LOCATION, PLEASE CORRECT. Explanation The data entered in this field by the user is not in the proper format. User Action Correct and retry.

VRCM111E TOO MANY PARAMETERS WERE ENTERED, PLEASE CORRECT. Explanation VRC was invoked with too many parameters. User Action Refer to the user’s guide for the correct syntax and retry.

VRCM112E LOGIC ERROR 1 IN VRCSPGMS, CONTACT VANGUARD TECH SUPPORT. Explanation Internal program error. User Action Contact Vanguard Technical Support.



VRCM115E LOGIC ERROR 4 IN VRCA0008, CONTACT VANGUARD TECH SUPPORT. Explanation Internal program error. User Action Contact Vanguard Technical Support.



VRCM116E GETMAIN ERROR, PLEASE INCREASE YOUR REGION SIZE AND TRY AGAIN. Explanation VRC could not obtain the required storage for execution. User Action Increase your TSO logon region size and retry.


VRCM118E VIOUNIT MISSING IN VRAOPT00 MEMBER. Explanation The VIOUNIT parameter could not be found in the VRAOPT00 member of the VIPOPTS library. User Action Add the VIOUNIT parameter.

VRCM119E DATEFORMAT INVALID IN VRAOPT00 MEMBER. Explanation The DATEFORMAT parameter in the VRAOPT00 member of the VIPOPTS library contains a syntax error. User Action Correct the parameter and retry.


VRCM121E YOU ARE NOT AUTHORIZED TO LIST THIS ENTRY. Explanation You do not have the RACF authority to list this entry. User Action Contact your system administrator.

VRCM123E RECORD ALREADY EXISTS, PLEASE CORRECT AND TRY AGAIN. Explanation The item you are attempting to add to a repeat group already exists. User Action Correct and retry.

VRCM124E UNABLE TO DELETE THIS RECORD. Explanation The item you are attempting to delete cannot be deleted from this repeat group. User Action Correct and retry.



VRCM125E INVALID PROFILE/DATA SET NAME, PLEASE CORRECT AND TRY AGAIN. Explanation Invalid characters have been detected within the entry name. User Action Correct and retry.

VRCM126E LOGIC ERROR IN VRCATHLD, CONTACT VANGUARD TECH SUPPORT. Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM127E INVALID PROFILE TYPE, PLEASE CORRECT AND TRY AGAIN. Explanation Valid profile types are G for generic, or D for discrete. User Action Correct and retry.

VRCM128E "SELECT" CHARACTER IS INVALID, PLEASE CORRECT AND TRY AGAIN. Explanation An invalid character was entered in the Select field. User Action Correct and retry.

VRCM129E NEW ITEM IS INVALID, PLEASE CORRECT AND TRY AGAIN. Explanation The format or syntax of a new item being added is invalid. User Action Correct and retry.

VRCM130E LOGIC ERROR IN VRCATHSR, CONTACT VANGUARD TECH SUPPORT. Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM131E PROFILE ALREADY EXISTS, PLEASE CORRECT AND RETRY. Explanation For data set profiles, N was entered, but the profile already exists. User Action Correct and retry.

VRCM132E UNABLE TO PRE-LOAD LMOD "VICASR". Explanation Unable to find Module VICASR. User Action Confirm that correct steplib or Linklst concatenation is being used. Correct and retry.



VRCM134E PROFILE NOT FOUND, PLEASE CORRECT AND RETRY. Explanation For data set profiles, E was entered, but the profile does not exist. User Action Correct and retry.

VRCM135E INVALID USER ID, PLEASE CORRECT AND TRY AGAIN. Explanation The User ID entered contains invalid characters. User Action Correct and retry.

VRCM136I NO PROFILE EXISTS, PANEL SET UP FOR "NEW" INPUT. Explanation The requested profile was not found, new is assumed. User Action Input data for the new profile.

VRCM140I NO COMMANDS WERE GENERATED. Explanation The GO primary command was entered, but no changes were detected. User Action Correct and retry.

VRCM141I ENTER THE REFRESH COMMAND TO UPDATE THE DISPLAY. Explanation A GO command has been processed, contents of the display may have changed, issue the REFRESH command to update the display fields. User Action Issue the “REFRESH” command if needed.

VRCM142I CHECK SDSF LOG FOR ERROR MESSAGE(S) AND CORRECT. Explanation The datecode (in the VRAOPT00 Options library) could not be validated. User Action Check the SDSF log for the detailed error messages, correct the Options member, and then re-run.

VRCM143E VRC OBJECT SERVICES ERROR, CONTACT VANGUARD TECH SUPPORT. Explanation Main Object Services processing encountered an unrecoverable error. User Action Contact Vanguard Technical Support for problem debugging and tracing help.



VRCM144E VRC OBJ SERVICES FIELD LEVEL ERROR, CONTACT VANGUARD TECH SUPPORT.

Explanation Main Object Services encountered an error within RACF database. User Action Verify supported release of RACF is being used and that you have installed current RACF maintenance from IBM (such as APARS OW40129 and OW42991). If problem persists, contact Vanguard Technical Support for additional action.

VRCM145E CODE NOT AUTHORIZED. ALARM=YES Explanation The library that the Object Services routines (and probably all of the Administrator load Modules) is not APF authorized. No processing is done. User Action Take steps necessary to authorize the load library and the load Module. If you need additional assistance, call Vanguard Technical Support.

VRCM147E INVALID GROUP ID, PLEASE CORRECT AND TRY AGAIN.' Explanation The group id entered contains imbedded spaces or commas. User Action Correct the group id and re-run.

VRCM148E LOGIC ERROR 7 IN VRCA0008, CONTACT VANGUARD TECH SUPPORT.' Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM149E LOGIC ERROR 8 IN VRCA0008, CONTACT VANGUARD TECH SUPPORT.' Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM150E ERROR SAVING THE BASELINE CONFIGURATION.' Explanation There was an error while saving the Baseline information to the user’s ISPF profile dataset. User Action Validate that the user can update their own profile dataset. If error persists, Contact Vanguard Technical Support.

VRCM153W NO BASELINE FOUND, CONTACT YOUR VRC ADMINISTRATOR.' Explanation A baseline member could not be found in the Options library for non Systems Special users. User Action Contact your VRC Administrator to have them set up a baseline (i.e. issue the Save command).



VRCM154E INCOMPATIBLE BASELINE, CONTACT YOUR VRC ADMINISTRATOR.' Explanation The baseline member in the Options library is incompatible with the current release (the Options library was probably copied from a previous release rather than being recreated). User Action Contact your VRC Administrator to have them set up a baseline (i.e. issue the ‘Save’ command).

VRCM156E CLASS NAME IS INVALID. PLEASE CORRECT AND RETRY. Explanation The Class name entered contains invalid characters (probably an imbedded space or comma). User Action Correct the class name and re-run.

VRCM157E PROFILE NAME IS INVALID. PLEASE CORRECT AND RETRY.' Explanation The Profile name entered contains invalid characters (probably an imbedded space or comma). User Action Correct the Profile name and re-run.

VRCM158E INVALID COMMAND GO (VGO), CONFIG (VCONFIG), AND REFRESH (VREFRESH) COMMANDS ARE AVAILABLE.


VRCM158I GO (VGO), CONFIG (VCONFIG), AND REFRESH (VREFRESH) COMMANDS ARE AVAILABLE.


VRCM159E INVALID COMMAND THERE ARE NO PRIMARY COMMANDS AVAILABLE. Explanation Command on the Option/Command line on the panel is incorrect. User Action Correct and retry.

VRCM159I THERE ARE NO PRIMARY COMMANDS AVAILABLE. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.



VRCM160E RACF IS NOT ACTIVE, PLEASE CONTACT YOUR SYSTEMS PROGRAMMER.' Explanation RACF is not active. User Action Contact your Systems Programming staff.

VRCM161E RACF ERROR, RACROUTE R/C = NN, RACF R/C = NN, REASON = NN. Explanation RACF error. User Action Contact your Systems Programming staff.

VRCM162E CLASS IS NOT DEFINED TO RACF CLASS DESCRIPTOR TABLE, PLEASE CONTACT YOUR SYSTEMS PROGRAMMER.'

Explanation The Class name entered is not defined to RACF. User Action If the Class name entered was misspelled, correct and re-run. If the Class name entered was correct, contact your systems programming staff to have the class name added to the RACF Class Descriptor Table.

VRCM163E PROFILE EXCEEDS MAXIMUM PROFILE LENGTH (NN), PLEASE CORRECT.' Explanation The profile name entered is longer than that allowed by the Class Descriptor Table. User Action Correct the Profile name and re-run. If the profile name is correct, contact your systems programming staff to have the profile name length changed in the Class Descriptor Table.

VRCM164E PROFILES ARE NOT ALLOWED FOR THE REQUESTED CLASS.' Explanation Profiles are not allowed for the Class name entered. User Action Correct the Class name and re-run.

VRCM165W WARNING. PLEASE NOTE THAT THE REQUESTED CLASS IS NOT ACTIVE.' Explanation The Class name entered is either not active or is unknown. User Action Correct the Class name and re-run.

VRCM166E CLASS IS NOT DEFINED TO SAF ROUTER TABLE, PLEASE CONTACT YOUR SYSTEMS PROGRAMMER.'

Explanation The Class name entered is not defined. User Action Correct the Class name and re-run.



VRCM167E A "SETR RACLIST(CLASS) REFRESH" COMMAND MUST BE ISSUED IN ORDER TO LIST THIS PROFILE.'

Explanation A ‘SETROPTS CLASS(class) REFRESH’ command must be entered in order to list this profile. User Action Issue the ‘SETROPTS CLASS(class) REFRESH’ command and re-run.

VRCM168E INPUT INVALID IN NON-DISPLAYED FIELD, PLEASE SCROLL TO DISPLAY THE FIELD IN ERROR.'

Explanation There is an error with the data that is outside of what is currently being displayed. User Action Scroll the display (either up or down) to see which field(s) are in error.

VRCM171E VRCATHRL LOGIC ERROR (#1), CONTACT VANGUARD TECH SUPPORT.' Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM172E VRAASCOP LOGIC ERROR, CONTACT VANGUARD TECH SUPPORT.' Explanation Internal program error. User Action Contact Vanguard Technical Support.

VRCM173 ENTER D TO DELETE ITEM OR S TO SELECT ITEM. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRCM174E INVALID COMMAND CONFIG (VCONFIG) COMMAND IS AVAILABLE. Explanation Command on the Option/Command line on the panel is incorrect. User Action Correct and retry.

VRCM174I CONFIG (VCONFIG) COMMAND IS AVAILABLE. Explanation A question mark (?) was placed on the command line. This help message appears. User Action None.

VRCM175E INVALID COMMAND GO (VGO), SAVE (VSAVE), CONFIG (VCONFIG), AND REFRESH (VREFRESH) COMMANDS ARE AVAILABLE.




VRCM175I GO (VGO), SAVE (VSAVE), CONFIG (VCONFIG), AND REFRESH (VREFRESH) COMMANDS ARE AVAILABLE.

Explanation A question mark (?) was placed on the command line. This help message appears. User Action None.

VRCM176 ENTER S TO SELECT ITEM. Explanation A question mark (?) was placed in this field. This help message appears. User Action None.

VRCM177 ENTER D TO DELETE ITEM. Explanation Command on the Option/Command line on the panel is incorrect. User Action Correct and retry.

VRCM178E NOT A VALID OPTION ENTER ONE OF THE AVAILABLE OPTIONS AND PRESS ENTER.


VRCM178I ENTER ONE OF THE AVAILABLE OPTIONS AND PRESS ENTER. Explanation A question mark (?) was placed on the command line. This help message appears. User Action None.

VRCM179I REQUESTED CLASS IS NOT ACTIVE, PANEL SET UP FOR "NEW" INPUT. Explanation The requested General Resource class is not active and the requested profile was not found; therefore, the display panel was set up for a new profile. User Action Enter any necessary input and then issue the GO command to generate a new profile or exit if the profile name was entered incorrectly.

VRCM180E CLASS NAME IS NOT SUPPORTED. PLEASE CORRECT AND RETRY.' Explanation The Class name entered is not supported by VRC. User Action Correct the Class name and re-run.



VRCM181E DISCRETE PROFILE CONTAINS GENERIC CHARACTERS. PLEASE CORRECT & RETRY.

Explanation The profile entered has generic characters (i.e. *, %, or &) and was marked as discrete (or model or tape). Generic characters are only allowed in generic profiles. User Action Correct and retry.

VRCM182E CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. User Action Please contact your System Programmer/Security Administrator.

VRCM183W CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PANEL SET UP FOR "NEW" INPUT. NOTE: PROFILES SHOULD NOT BE CREATED UNDER THIS CONDITION. PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON.

Explanation Profiles should not be created under this condition. There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. The requested profile was not found; therefore, the display panel was set up for a new profile. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to generate a new profile or exit if the profile name was entered incorrectly.

VRCM184W NO PROFILE EXISTS, PANEL SET UP FOR "NEW" INPUT. NOTE: PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON.

Explanation The requested profile was not found; therefore, the display panel was set up for a new profile. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Enter any necessary input and then issue the GO command to generate a new profile or exit if the profile name was entered incorrectly.

VRCM185W CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to update the



profile or exit if the profile name was entered incorrectly. VRCM186W CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PROFILE WILL NOT

BE USABLE IF GENERIC IS TURNED ON. PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to update the profile or exit if the profile name was entered incorrectly.

VRCM187W PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON. Explanation The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Enter any necessary input and then issue the GO command to update the profile or exit if the profile name was entered incorrectly.

VRCM188W CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PANEL SET UP FOR "NEW" INPUT. NOTE: PROFILES SHOULD NOT BE CREATED UNDER THIS CONDITION. PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON. REQUESTED CLASS IS NOT ACTIVE. PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation Profiles should not be created under this condition. There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. The requested profile was not found; therefore, the display panel was set up for a new profile. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The requested class is not active. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to generate a new profile or exit if the profile name was entered incorrectly.

VRCM189W REQUESTED CLASS IS NOT ACTIVE. NO PROFILE EXISTS, PANEL SET UP FOR "NEW" INPUT. NOTE: PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON.

Explanation The requested class is not active. The requested profile was not found; therefore, the display panel was set up for a new profile. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings.



User Action Enter any necessary input and then issue the GO command to generate a new profile or exit if the profile name was entered incorrectly.

VRCM190W REQUESTED CLASS IS NOT ACTIVE. CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation The requested class is not active. There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to update the profile or exit if the profile name was entered incorrectly.

VRCM191W REQUESTED CLASS IS NOT ACTIVE. CDT MISMATCH ERROR (GENCMD=ON & GENERIC=OFF). PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON. 'PLEASE CONTACT YOUR SYSTEM PROGRAMMER/SECURITY ADMINISTRATOR.

Explanation The requested class is not active. There is a mismatch in the CDT. The GENCMD keyword is ON and the GENERIC keyword is OFF. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Please contact your System Programmer/Security Administrator. Enter any necessary input and then issue the GO command to update the profile or exit if the profile name was entered incorrectly.

VRCM192W REQUESTED CLASS IS NOT ACTIVE. PROFILE WILL NOT BE USABLE IF GENERIC IS TURNED ON.

Explanation The requested class is not active. The profile will not be usable if the GENERIC keyword is turned on in the CDT. The profile contains “generic” characters but the profile will be stored as “non-generic” under the current SETROPTS settings. User Action Enter any necessary input and then issue the GO command to update the profile or exit if the profile name was entered incorrectly.

VRCM193E ERROR. THE UNIVERSAL FLAG CAN ONLY BE SET WHEN A GROUP IS

CREATED. IT CAN NOT BE CHANGED USING THE ALTGROUP COMMAND. Explanation The Universal flag can only be set when a group is created. It cannot be changed using the ALTGROUP command. User Action None.



VRCM999I UNEXPECTED SECURITY SERVER RELEASE: XXXX. UNEXPECTED RESULTS MAY OCCUR. PLEASE CONTACT VANGUARD TECHNICAL SUPPORT.

Explanation The level of the Security Server (RACF) xxxx is not recognized. User Action Contact Vanguard Technical Support for a PTF that supports your release of the Security Server.

Vanguard Administrator 5.2 Message Ref Guide - jmit.com€¦ · Vanguard Administrator Messages Reference Guide iii ... Vanguard Connect Manager Messages ... UFMM004E Unable to create

Documents