Page 1
Vandal Resistant LED IlluminationManufactured from solid stainless steel the vandal resistant range of push button switches and pilot lamps can withstand severe abuse.
The IP65 rated units are available in several sizes and lighting options, with the integrated LED illumination in a variety of colours.
Low power consumption and long life make LED’s the ideal light source for Pilot Lamps and switches. All IONNIC pilot lamps are available is several colours and are multi-voltage 12-24V.
Page 2
MiscellaniesVandal Resistant 116
Pilot Lamps 117
Push Button 118
General 119
Ignition 120
Pendant 122
Trafficator 124
Low Coolant Alarm 125
Pressure 126
Custom Engraved Panels 127
Page 3
116
L16RR
L19-RA
V16 L22RG
Miscellanies
Vand
al R
esis
tant
• Vandal resistant momentary switches.
• LED illumination (excluding V16).
• 12-24V operation.
• Highly impact resistant.
• Variety of colours.
• IP65 rated (face only).
Voltage : 12-24VContact Rating : 2 AmpsContacts : Silver AlloyBody : Stainless Steel
Push-In PolycarbonateIngress Protection : IP65 (face only)Approvals : CE, RoHS
Momentary Switch - Push-InVoltage Size (mm) Max. Panel Thickness (mm) Circuitry Part Number
12-24V 16 1 Normally Open V16
16mm 1.8mm
16m
m
18m
m
0.4m
m
Normally OpenCOM
NC
Momentary Switch - IlluminatedVoltage Size (mm) Max. Panel Thickness (mm) Circuitry Red Green Amber Blue
12-24V 16 10 NO/NC L16-RR L16-RG L16-RA L16-RB
12-24V 19 10 NO/NC L19-RR L19-RG L19-RA L19-RB
12-24V 22 8 DM/DB L22-RR L22-RG L22-RA L22-RB
NO/NC
COMNC
NO
31mm
18m
m
16m
m
1.8mm
0.4m
m
NO/NC
COMNC
NO
22m
m
31mm
19m
m
2.8m
m
0.5mm
NC
NO NO
NC
DM/DB25m
m
27mm
22m
m
2.8m
m
0.5mm
22mm
19mm
16mm
Page 4
117
Miscellanies
P12-CR
BA16DS-RED
P19-CG
P19-RB
Pilot Lam
ps
Wide ViewVoltage Size (mm) Max. Panel Thickness (mm) Red Green Amber Blue
12-24V 16 10 BA16DS-RED BA16DS-GRN BA16DS-AMB BA16DS-BLU
LR01 Load resistor maybe required when used as an alternator warning light.
19m
m
35mm
16m
m
4.8m
m
0.5mm
• LED illumination.
• Vandal Resistant models rated to IP65 (face only).
• 12-24V operation.
• Ring and centre style illumination.
• Variety of colours.
• LR01 load resistor maybe required when used as an alternator warning light.
Voltage : 12-24VBody : Vandal Resistant Stainless Steel
Wide View ABS PolymerIngress Protection : IP65 (face only)Approvals : Vandal Resistant CE, RoHS
22mm
12m
m 2.8mm
15m
m
0.5m
m
RingCentre 27mm
19m
m
22m
m
2.8m
m
0.5mm
Vandal ResistantRed Green Amber Blue
Voltage Size (mm) Max. Panel Thickness (mm) Ring Centre Ring Centre Ring Centre Ring Centre
12-24V 12 7 - P12-CR - P12-CG - P12-CA - P12-CB
12-24V 19 7 P19-RR P19-CR P19-RG P19-CG P19-RA P19-CA P19-RB P19-CB
LR01 Load resistor maybe required when used as an alternator warning light.
19mm
12mm
Page 5
118
Miscellanies
90030
C936/K
C936
C936/D1
Voltage : 12-24VCircuitry : SPSTContacts : Silver AlloyBody : Polymer
90030 Die-cast
Pus
h But
ton
• Heavy & standard duty models available.
• Normally Open or Normally Closed contact types.
• 12-24V operation.
PushbuttonPart No. Amps Contact Type Action Max Panel Thickness (mm) Terminal Type
C936 10 @ 12V N/O Off - Mom.On 5 Blade
C936/K 10 @ 12V N/O Off - Mom.On 5 Blade
C936/D1 10 @ 12V N/O Off - Mom.On 3.5 Blade
C938/D1 10 @ 12V N/C On - Mom.Off 3.5 Blade
90030 35 @ 12V N/O Off - Mom.On 8 Screw
C936 C936/K
C936/D1, C938/D190030
63mm 28mm
Ø4mmØ16mm
42mm
24m
m
6.3mm
17mm
Ø12mm
44mm 17mm
24m
m
6.3mmØ12mm
41mm
6.3mm
24m
m
17mm
Ø12mm
Page 6
119
Miscellanies
TS02
PPS-01
PPS-02
General
• Heavy & standard duty push-pull switches available.
• PPS-02 supplied with 4 coloured caps. Can be illuminated, bulb not supplied.
Voltage : 12-24VContacts : Silver AlloyBody : Polymer
PPS-01 Die-cast
GeneralPart No. Description Voltage Amps Action Max Panel Thickness (mm)
PPS-01 Heavy duty push-pull 12-24 75 Push - Pull 10
PPS-02 Standard duty push-pull 12-24* 20 Push - Pull 2.5
TS02 Toggle 12-24 10 Toggle - On - Off - On 2.5
*Bulb not included with PPS-02. Bulb type - BA7S.
PPS-01
36m
m
71mm 22mm
Ø12mm
PPS-02
22mm
31m
m
56mm
Ø10mm
TS02
28m
m
23mm55mm
Ø12mm
Page 7
120
Miscellanies
IGS-07IGS-02
IGS-01
IGS-05
Igni
tion
• Bosch™ & Lucas™ style heat start switches.
• Die-cast & polymer models available.
• Marine version available.
• 6-36V operation.
Voltage : 6-36V
PreheatPart No. Key Positions Terminal Size (mm) Terminal Type
Terminal IDStart Preheat Ignition Battery Park
IGS-02 Park - Off - Ignition - Preheat - Start 6.3 & 9.4 Blade 50a, 17 19 15/54 30 58
IGS-07 Off - Ignition - Preheat - Start 6.3 & 9.4 Blade 4 3 2 1 -
Park - this key position provides power for use on auxiliary circuits while vehicle is not operating. i.e. external park lights etc.
IGS-02
IGS-07
54mm53mm
3.5mm
Ø16.5mm
4
13
2
IGS-02/KEY IGS-02/BOOT IGS-07/KEY
Accessories - PreheatPart No. Description
IGS-02/KEY 2 x spare key for IGS-02
IGS-02/BOOT Protective boot for IGS-02
IGS-07/KEY 2 x spare key for IGS-07
63mm 55mm
3.5mm
Ø26.5mm
17
50a
30 58
1915/54
30-5830-15/54
30-1930-17
30-50a
P 0 III III
1-21-31-4
0 I II III
Page 8
121
Miscellanies
MarinePart No. Key Positions Terminal Size (mm) Terminal Type
Terminal IDGround Battery Magneto Start Ignition
IGS-03 Off - Ignition - Start 4 Screw G B M S A
Terminals G and M are bridged when key is in “OFF” position.
UniversalPart No. Key Positions Terminal Size (mm) Terminal Type
Terminal IDGround Ignition Start Battery Accessory
IGS-01 Accessory - Off - Ignition - Start 6.3 Blade G I S B A
IGS-04 Accessory - Off - Ignition - Start 5 Stud - I S B A
IGS-05 Accessory - Off - Ignition - Start 6.3 Blade - I S B A
9579 Accessory - Off - Ignition - Start 4 Screw - I S B A
71mm 37mm
26mm
Ø21
.5m
m SA
G
BM
9579
IGS-03
62mm 36mm
6mm
Ø19mm
SA
B
I
B-AB-I
B-S
0 I II III
IGS-01
50mm 45mm
3.5mm
Ø16.5mm
S
A I
B
G
B-AB-I
B-S
0 I II III
Body-G
B-AB-S
G-M
0 I II
IGS-04
45mm67mm
5mm
Ø19mm
S
A
BI
B-AB-I
B-S
0 I II III
IGS-05B-AB-I
B-S
0 I II III
35mm
5mm
54mmØ19mm
SA
B
I
Page 9
122
Miscellanies
THS822A
THS62
THS61
Pen
dant
• Waterproof model available - THS822A.
• HC1 Pendant Control configurable to personal requirements.
• Engraved face plate for the HC1 Pendant Control on request.
• Hoist Push Button series used for indirect switching.
Voltage : 12-24VBody : Hoist ABS
HC1 Polyurethane
Hoist Push ButtonPart No. Description Contact Rating (Amps)
THS61 2 button hoist control - Single Speed. Only for relay solenoid control 2
THS62 4 button hoist control - Single Speed 2
THS822A Waterproof 4 button hoist control - Single Speed 5
THS61 THS62 THS822A
50mm
131m
m
69mm
110m
m
50mm
192m
m
69mm
110m
m
77mm
214m
m
53mm
110m
m
Page 10
123
Miscellanies
Pendant ControlPart No. Description
HC1 Hand controller body
FP Face plate - blank
FP2 Face plate - 2 hole. 8mm switch hole
FP3 Face plate - 3 hole. 8mm switch hole
CG16SR IP68 strain relief adaptor - 5mm to 10mm
Requires 7 x 8mm screws for face plate.
Engraved face plates available on request.
HC1
FP2 FP3FP
Example shown with toggle switches installed
CG16SR
88mm
70m
m
145mm
205m
m
Ø6mm
Compatible Suzi CoilsPart No. No. of Cores Cores - Qty x mm2 Tails Working Length - m Fig
RC013 7 7 x 0.5 2x Tangent 3 1
RC014 7 7 x 0.5 2x Tangent 2 1
RC031 7 7 x 1.5 2x Tangent 8 2
RC032 7 1 x 2, 6 x 1 2x Tangent 3 3
RC022 7 7 x 0.75 Tangent & Axial (N12) 7.5 4
Fig 1
RC022
Fig 2
Fig 3 Fig 4
Tangent
Tangent
Axial
7 Pin N12 Plug
Tangent
N12 Plug
2
1
1
1
1
1
1
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.75
0.75
0.75
0.75
0.75
0.75
0.75
1.5
1.5
1.5
1.5
1.5
1.5
1.5
Page 11
124
Miscellanies
IM-11120
900905
Body : IM-11120 Polymer900, 905 Die-cast
• Cast alloy heavy duty & standard duty models available.
• Universal mount.
• IM-11120 & 905 feature indicator, hazard and dimmer functions.
• 900 model features pilot lamp for turn and hazard indication.
• 900 model can be used for 24V applications by changing the pilot bulb.
• 905 includes a 12V change over relay.
TrafficatorPart No. Voltage Description Harness Length (mm)
IM-11120 12-24 Standard duty. Indicator, Hazard Lights, Dimmer* 500
900 12 Heavy duty. Indicator, Hazard Lights 450
905 12 Heavy duty. Indicator, Hazard Lights, Dimmer. Includes 12V C/O relay 800
All supplied with adjustable column mounting strap.
*Dimmer function for IM-11120 suits latching relay.
Traf
ficat
or
IM-11120 900 905
184mm
70m
m55
mm
102mm
60m
m
184mm
70m
m55
mm
102mm
60m
m
66m
m
225mm
108m
m
63m
m
148mm
Push button for highbeam control
Page 12
125
Miscellanies
WL601P
WL601PS1
WL601LP
B657
BA16DS-RED
8015002
Voltage : 12-24VSensing Depth : WL601P 35mm
WL601PS1 25mmCurrent Rating : WL601LP 3 Amps @ 12V
8015002 10 Amps
• Visual & audible warning device for water/coolant level monitoring.
• LED indicator on modules.
• 7 second “slosh” delay preventing false triggering.
• Epoxy encapsulated modules.
• Brass sleeve or rubber multi-fit style probes available.
KitsKit Contents
Part No. Description Probe (x 1) Module (x 1) Pilot Lamp (x 1) Buzzer (x 1)
WL-1 Threaded Probe & 10A Module WL601PS1 WL601LP BA16DS-RED B657
WL-2 Multi-fit Probe & 10A Module WL601P WL601LP BA16DS-RED B657
WL-3 Threaded Probe & 3A Module WL601PS1 8015002 BA16DS-RED B657
WL-4 Multi-fit Probe & 3A Module WL601P 8015002 BA16DS-RED B657
All components available separately.
Low C
oolant Alarm
WL601P
8015002
B657 BA16DS-RED
WL601LP
WL601PS1
21m
m
66mm
37m
m
Ø4.5mm
27m
m42
mm
6.3m
m
72mm
87mm Ø5.5mm
55m
m
16m
m19
mm
6.3m
m
Ø9.5mm
64m
m28m
m
25m
m
Ø1/4” NPT
43m
m43mm
34m
m
6.3m
m
35m
m
19mm
16mm
4.8mm
Page 13
126
Miscellanies
Voltage : 6-24VCircuitry : SPCOProof Pressure : 500 PSICurrent Rating : 8 Amps @ 12VTerminals : #8-32 screws & 6.3mm bladeConnection : 1/8 - 27 NPT MaleBase : BrassCover : Glass reinforced polyesterDiaphragm : Polyimide filmContact : Silver alloy, gold platedOperating Temp : -40 °C to + 120°CApprovals : CE, UL
• Compatible with a wide range of substances including air, motor oils, transmission oils, fuels and other similar petroleum based liquids and gases.
• Water compatible model on request.
• Single pole change over.
• Robust, compact design suitable for harsh environments.
• Tolerates high pressure spikes.
• Supplied with 6.3mm blade terminals.
PressurePart No.
Switching Pressure Maximum Operating Pressure Burst PressurePSI KPA PSI KPA PSI KPA
PS3-4 4 27 150 1034 750 5171
PS3-10 10 69 150 1034 750 5171
PS3-15 15 103 150 1034 750 5171
PS3-20 20 137 150 1034 750 5171
PS3-30 30 206 250 1723 1250 8618
PS3-40 40 275 250 1723 1250 8618
PS3-50 50 344 250 1723 1250 8618
PS3-60 60 413 250 1723 1250 8618
PS3-BOOT Protective Boot
38mm
10m
m
62mm
1/8 - 27 NPT
Pre
ssur
e
Page 14
127
Miscellanies
Custom Engraving
Custom engraving is available for the creation of control panels and name plates up to a maximum size
of 500mm x 380mm.
Choose from a large range of colours with some materials suitable for use with backlighting.
For further information ask your local reseller or enquire on-line at ionnic.com.
Engraver Type : Rotary flat bedMaximum Size: 500mm x 380mmMaterials : Laminated Impact Acrylic
UV Stabilised
• Front or rear engraving.
• Large range of colour combinations including metallic finishes.
• Materials available for use with backlighting.
• UV Stabilised.
• Ideal for: - Safety signage - Control panels - Product tags - Name plates
Custom
Engraved Panels