1 VALVES TYPE & FUNCTION VALVES
1
VALVES TYPE & FUNCTION
VALVES
2
Valves On-Off Service Throttling (Regulating) Service Prevention of back flow Pressure control (Control Valve)
3
ON – OFF SERVICE
4
Gate valve.
5
Gate Valve :-
ON – Off Valve ,Used in:1-Water.2- Oil.3- Gas4- SteamAnd Other Fluid Services.
6
Wedge gate valve and parallel slide valve
7
Gate valve 2.
8
Plug valve (on-off) or Cock low-pressure
9
Plug valve (on-off) or Cock
10
Plug valve Applications Gas and liquid fuel Water. Extreme temperature flow Boiler feed water. Low Pressure Steam . Corrosive Liquids and Gases
11
Ball Valve (on-off)
12
13
Ball Valve Quarter-TurnHydraulic systems .Water .Air.Oil .Petrochemical .High volume, high pressure and high
temperature flow .
14
THROTTLING(Regulating)
SERICE
15
Globe Valve (High pressure & value )
16
Globe Valve.
17
Globe Valve Ops.
18
Needle Valve Fine accurate flow Cont.
19
Butterfly Valve Flow Control Low Speed Both Side flow
20
21
Butterfly Valve 2
22
Prevention of back flow
23
split disc check
24
Split disc check valve operation
25
lift check valve (Recommended forVapor service)
26
Swing check valve (liquids)installed horizontal & vertical
27
Swing check valve Ops.
28
Piston check valves
29
check valves
30
Ball check valve (for heavy fluids) installed horizontal ,vertical & angle
31
Check valve (Ball)
32
Pressure Relive valves
33
safety valves and relief valves Safety valves are primarily used with
compressible gases and in particular for steam and air services .
Relief valves are commonly used in liquid systems
34
Pressure Relief Valves
Releases excess pressure to protect system. Use with Gases & Vapors & liquid. Open Full at once at set pressure. Outlet port larger than inlet port. Never adjust whilst in service.
35
Type of Pressure Relief Valve
Safety valve :Used with compressible gases .steam and air services .
Relief valve : Used in liquid systems. as pressure overspill devices .
Safety relief valve : used either for liquid or compressible fluid.
36
Pressure Relieve valve (safety valve) for clean air
Releases excess pressure (clean air)
37
Safety valve - liquid applications, opens in proportion to the
38
Typical examples of safety valves used on steam & Air systems
39
40
pneumatic pressure reducing
41
Control system would normally consist of the following components:
Control valves. Actuators. Controllers. Sensors.
42
Globe Valve.
43
44
Valve positions
45
Orifice plate
46
pressure gauge