This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Valves
Valves Range 1340 Double Check Valves PN16
Material Specification
1340 - 1/2" - 2"
No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon Nylon 66 4 Clip Stainless steel BS.ISO.15510 5 O Ring EPDM EN 2430:1995 6 Drain Screw DZR Brass BS EN 1982 CC491K
Valves Range 1360 Horizontal Lift Check Valves PN32
Material Specification
1360 - 1/2" - 2"
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Disc Bronze BS EN 1982 CC491K 4 Gasket Seal PTFE PTFE 5 ID Disc Aluminium EN 1706 LM6
No Component Material Specification 1 Seat EPDM EN 2430:1995 2 Spring Stainless Steel BS.ISO.15510 3 Spindle (Up) Brass BS EN 12165 CW617N-DW 4 Spindle (Down) Brass BS EN 12165 CW617N-DW 5 Bonnet Brass BS EN 12165 CW617N-DW 6 Body Brass BS EN 12165 CW617N-DW
Valves Range 1451 Spring Check Non Return Valve
Material Specification
Valves Valves Range: 1451 Spring Check Non Return Valve
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1451 x 3 3 x 3* x x x x
Valve Suitability
1451 Temp (°C) Bar psi
Water -10°C to + 100°C PN 12/10 Min Operating Pressure
1/2" - 1" 12 bar @ 90°C -0.002 bar to + 0.04 bar
1/4" - 2" 10 bar @ 90°C Not suitable for hot working
Max. working parameters
* Limited to 5 bar max
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:• Designed in accordance with WRAS requirement.
• Brass core for improved strength and performance .
No Component Material Specification 1 Body Brass BS EN 112165 CW617N 2 Cap Brass BS EN 112165 CW617N 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Brass BS EN 112165 CW617N 6 Seat Brass BS EN 112165 CW617N 7 Retaining Nut Brass BS EN 112165 CW617N
No Component Material Specification 1 Body Bronze BS EN 1982 CC491K 2 Cap Bronze BS EN 1982 CC491K 3 Identity Disc Aluminium EN 1706 LM6 4 Swing Pin Stainless steel BS.ISO.15510 5 Swing Arm Bronze BS EN 1982 CC491K 6 Seat Bronze BS EN 1982 CC491K 7 Retaining Nut Bronze BS EN 1982 CC491K
No Component Material Specification 1 Body DZR BS EN12165 CW602N 2 Seat Washer NBR NBR 3 Washer Plate Brass BS EN12165 CW617N-DW 4 Spindle Brass BS EN12165 CW617N-DW 5 O Ring NBR NBR 6 Gland Nut Brass BS EN 12164 CW614N
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
2
Valves Valves Range: S746 Drain Tap
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) S746 x 3 3 x x x x x x
Valve Suitability
S746 Temp (°C) Bar psi Non Gas -30°C to + 110°C PN16/PN5
Max. working parameters
Specification Clause:
Designed and manufactured to BS 2879 Type 2
Dezincification Resistant
WRAS Approved
Pressure rating PN 16 at 30°C : PN 5 at 110°C
Operating Temperature Range 0 to 110°C
Loose key operation
This valve is excluded from the requirements of the Pressure Equipment Directive PED 97/23/EC Article 1 - 3.20
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Approved for drinking water applications.
Drain tap - S746
Order Code Size DN A B CWeight
(kg)
N746015000000 1/2” 15
Valves
Valves Range 1120 Gate Valve Handwheel – PN20 Light Pattern
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1120 - 1/2" - 2" No Component Material Specification
1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1001 - 15-54mm
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6 13 Compression Ring Brass BS 2872 CZ107 14 Compression nut Brass BS EN 12165 CW617N-DW
Valves Range 1001 Gate Valve Handwheel PN16 – Compression Material Specification
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1121 Gate Valve Handwheel PN20 (Bronze)
Material Specification
Handwheel version: 1121 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Handwheel PN20 (Brass)
Material Specification
Handwheel version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Lock Shield PN20 (Brass)
Material Specification
Lock Shield version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer Brass BS EN 12165 CW617N-DW 9 Ferrule Brass BS EN 12164 CW614N
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Handwheel PN20 (DZR)
Material Specification
Handwheel version: 1124 - 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW617N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Lock Shield PN20 (DZR)
Material Specification
Lock Shield version: 1124- 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW602N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Ferrule Brass BS EN 12164 CW614N
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1126 Gate Valve Handwheel PN32 (Bronze)
Material Specification
Handwheel version: 1126 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.
1802 - 1/2" - 4"
No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Blanking Plug DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Brass BS EN 12165 CW617N-DW 6 Filter Screen Stainless Steel BS.ISO.15510 7 Body Brass BS EN 12165 CW617N-DW
Valves Valves Range: 1802 Y Pattern Strainer PN16 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1802 x 3 3 3 3 x x x x
Valve Suitability
1802 Temp (°C) Bar psi
Water -10°C to + 120°C PN16
Max. working parameters
Specification:Brass Body.
Stainless Steel SS304 Screen.
Brass screw in Cap.
End connections to BS EN 10226 (ISO7) or to ISO228.
Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.
Test pressure 24 bar hydraulic.
• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
7
100 170
0 30 60 90 120 150 180 210
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Streamlined design in order to minimise pressure drop.
• Stainless steel mesh.
• Robust and compact design.
• Drilled and tapped for test point bosses available to order.
• Threads in accordance with BS EN 10226 (ISO7).
Valves
Scale and dirt can cause problems and damage to equipment installed in pipe systems. The installation of Conex Strainers will assist in reducing problems which might occur due to extraneous matter in pipe runs. Conex Strainers are a low cost investment ensuring a rapid return as they will assist in reducing system downtime and lowering maintenance costs.
1804 - 1/2" - 4"
No Component Material Specification 1 O - Ring EPDM EN 2430:1995 2 Balancing Plugs DZR Brass BS EN 12164 CW602N 3 Rating Disc Aluminium EN 1706 LM6 4 Washer PTFE PTFE 5 Cap Bronze BS EN 1982 CC491K 6 Screen Stainless Steel BS.ISO.15510
7 Body Bronze BS EN 1982 CC491K
Valves Range 1804 Y Pattern Strainer PN16 (Bronze)
Valves Valves Range: 1804 Y Pattern Strainer PN16 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen)
1804 x 3 3 3 3 x x x x
Valve Suitability
1804 Temp (°C) Bar psi
Water -10°C to + 100°C PN16
Max. working parameters
Specification:Bronze Body.
Stainless Steel SS304 Screen.
Bronze screw in Cap.
End connections to BS EN 10226 (ISO7).
Pressure rating PN16 16 bar -10 to +100 degrees C. 7 bar At 170 degrees C.
Test pressure 24 bar hydraulic.
• The fluid to be transported is limited to Group 2 liquids i.e. non-hazardous and on no account should these valves be used for any Group 2 Gases, Group 1 Liquids or Group1 Gases.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC
7
100 170
0 30 60 90 120 150 180 210
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Integral test bosses allows for measurement of flow.
• Suitable for LTHW and chilled systems.
• Available with drilled and tapped bosses to order.
• Bronze body with streamlined internal contour to minimise pressure drop across valve.