• T: +44 161 9333933 • Sales@dynamiccontrols.co.uk • T: +1 562 7334634 • ORodriguez@cunicocorp.com VALVE TECHNICAL DATA SHEET HIGH TEMPERATURE BELLOWS SEALED VALVE SERIES 4 Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection. ASME III option available. Straight Pattern shown, also available as Angle pattern and Oblique pattern. Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, buttweld and screwed. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. Dimensions Valve Size Dim Dim Dim Weight Cv DN A mm B mm C mm Kg IGPM DN8 108 241 100 9 1.7 DN15 108 241 100 9 2.45 DN20 117 241 100 9 2.45 DN25 127 254 100 9.6 5.8 DN40 165 368 150 24 12.4 DN50 203 400 150 25 18.5 Material Specification Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush Stainless Steel Valve St.St. ASTM A182 F316H St.St. ASTM A182 F316H Integral Hard Faced St. St. - Hard Faced St.St. ASTM A182 F316H Incolloy 800H or 800HT Exfoliated Graphite Aluminium Service Service Temperature Pressure ºC bar g 38 103.4 50 101.6 100 94.2 200 79.6 300 70.6 400 65.7 500 63.4 600 49.8 700 22.8 800 8.8 816 7.2 Valve Datasheet 1 Date Issued: Sept. 2020
33
Embed
VALVE TECHNICAL DATA SHEET HIGH TEMPERATURE BELLOWS … · 2020. 9. 29. · BELLOWS SEALED VALVE - NUCLEAR SERIES 34 . Class 600 Bellows Sealed Globe Valve designed to ASME III, Conven-
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
VALVE TECHNICAL DATA SHEET HIGH TEMPERATURE BELLOWS SEALED VALVE
SERIES 4
Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection.
ASME III option available. Straight Pattern shown, also available as Angle pattern and Oblique pattern.Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, buttweld and screwed.
Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Dimensions
Valve Size Dim Dim Dim Weight Cv DN A mm B mm C mm Kg IGPM
Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush
Stainless Steel Valve St.St. ASTM A182 F316H St.St. ASTM A182 F316H Integral Hard Faced St. St. - Hard Faced St.St. ASTM A182 F316H Incolloy 800H or 800HT Exfoliated Graphite Aluminium
Date Issued: Sept. 2020Part of Dynamic Controls Ltd
BELLOWS SEALED CARTRIDGE VALVE – MANIFOLD Series 34
Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. To BSEN15761 or Nuclear Class to ASME III available. Valve can be supplied with actuation - Electric or Pneu- matic plus controls. Extended spindle versions also available. Manifold Block designed to suit requirements, distribution blocks, double block and bleed, reducing stations. Valve type and numbers to suit requirements.
Cartridge Valve, seat and all seals are removed with the top assembly. This leaves only body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.
Suitable for High/Low Temperature / Extreme duties Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperature upto 700ºC. Materials can be changed to customer specifications.
3 Valve 6 Valve Distribution Block
Distribution Block
Material Specification Body Bonnet Seat Seat Seal Disk Stem Bellows Back up Gland
Class 600 Bellows Sealed Globe Valve, Conven- tional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. To BSEN15761 or Nuclear Class to ASME III available Valve can be supplied with actuation - Electric or Pneumatic plus controls. Extended spindles alao available Buttweld end connections shown, also avail- able as screwed, socket weld, Flanged or special connection or Manifold blocks
Cartridge Valve, seat and all seals are removed with the top assembly. This leaves only body left in line. Maintainence time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperature upto 608ºF. Materials can be changed to customer specifications.
Class 600 Bellows Sealed Globe Valve to BS5352/ANSI B16.34, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Hermetically Seal Welded Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Locking Device, Interlocks, Extended Spindle. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, but- tweld and screwed ends to BS5352. Pres- sure/Temperature rating to ANSI B16.34 differ. Materials can be changed to customer speci- fications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not rec- ommended for use above 425ºC. If in doubt please ask, we will advise suit- able materials for the temperature, pressure and media.
Dimensions
Valve Size DN
DN8/¼” DN15/½” DN20/¾” DN25/1” DN40/1½”
Dim A in 4.25” 4.25” 4.60” 5.00” 6.50”
Dim B in 9.50” 9.50” 9.50”
10.00” 14.50”
Dim C in 3.95” 3.95” 3.95” 3.95” 5.90”
Weight lb 19.8 19.8 19.8 21.2 52.9 55.1
Cv IGP
M 1.7 2.45 2.45 5.8
12.4 18.5
Material Specification
Body Bonnet Seat
Disk
Stem Bellows Back up Gland Yoke Bush
Carbon Steel Valve C.St. ASTM A105C.St. ASTM A105St.St. Type 410, Type 316or Integral Stellite HFSt.St. Type 410, Type 316or Stellite HFSt. St. Type 316St. St. Type 316Exfoliated GraphiteAluminium Bronze
Stainless Steel Valve St.St. Type 316 St.St. Type 316 St.St. Type 410, Type 316 or Integral Stellite HF St.St. Type 410, Type 316 or Stellite HF St. St. Type 316 St. St. Type 316 Exfoliated Graphite Aluminium Bronze
Class 800 Bellows Sealed Globe Valve to BS5352, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection.
Nuclear Versions to ASME III available.
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, but- tweld and screwed ends to BS5352
Materials can be changed to customer speci- fications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not rec- ommended for use above 425ºC. If in doubt please ask, we will advise suit- able materials for the temperature, pressure and media.
Dimensions
Valve Size DN
DN8/¼” DN15/½” DN20/¾” DN25/1” DN40/1½”
Dim A in 4.25” 4.25” 4.60” 5.00” 6.50”
Dim B in 9.50” 9.50” 9.50”
10.00” 14.50”
Dim C in 3.95” 3.95” 3.95” 3.95” 5.90”
Weight lb 19.8 19.8 19.8 21.2 52.9 55.1
Cv IGP
M 1.7 2.45 2.45 5.8
12.4 18.5
Material Specification
Body Bonnet Seat
Disk
Stem Bellows Back up Gland Yoke Bush
Carbon Steel Valve C.St. ASTM A105C.St. ASTM A105St.St. Type 410 orIntegral Stellite HFSt.St. Type 410 orStellite HFSt. St. Type 316LSt. St. Type 316LExfoliated GraphiteAluminium Bronze
Stainless Steel Valve St.St. Type 316L St.St. Type 316L St.St. Type 410 or Integral Stellite HF St.St. Type 410 or Stellite HF St. St. Type 316L St. St. Type 316L Exfoliated Graphite Aluminium Bronze
Class 600 Bellows Sealed Globe Valve designed to ASME III, Conven- tional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Seal Welded Bonnet version available.
Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials.
Materials can be changed to customer speci- fications. There are temperature restrictions on some materials, ie. C.St. ASME SA105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suit- able materials for the temperature, pressure and media.
Dimensions
Valve Size DN
DN8/¼” DN15/½” DN20/¾” DN25/1” DN40/1½”
Dim A in 4.25” 4.25” 4.60” 5.00” 6.50”
Dim B in 9.50” 9.50” 9.50”
10.00” 14.50”
Dim C in 3.95” 3.95” 3.95” 3.95” 5.90”
Weight lb 19.8 19.8 19.8 21.2 52.9 55.1
Cv IGP
M 1.7 2.45 2.45 5.8
12.4 18.5
Material Specification
Body Bonnet Seat
Disk
Stem Bellows Back up Gland
Carbon Steel Valve C.St. ASME SA105C.St. ASME SA105St.St. ASME SA564 630or Integral Stellite HFSt.St. ASME SA564 630or Stellite HFSt. St. ASME SA479 316L St. St. Type 316Exfoliated Graphite
Stainless Steel Valve St.St. ASME SA182 316L St.St. ASME SA182 316L St.St. ASME SA564 630 or Integral Stellite HF St.St. ASME SA564 630 or Stellite HF St. St. ASME SA479 316L St. St. Type 316 Exfoliated Graphite
Date Issued: Sept. 2020 Part of Dynamic Controls Ltd
Class 600 Bellows Sealed Globe Valve, Conven- tional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. To BSEN15761 or Nuclear Class to ASME III available Valve can be supplied with actuation - Electric or Pneumatic plus controls. Extended spindles alao available Buttweld end connections shown, also avail- able as screwed, socket weld, Flanged or special connection or Manifold blocks
Cartridge Valve, seat and all seals are removed with the top assembly. This leaves only body left in line. Maintainence time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperature upto 1290ºF. Materials can be changed to customer specifications.
Date Issued: Sept. 2020 Part of Dynamic Controls Ltd
Series 34 High Temperature Bellows Sealed Valve Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection. ASME III option available.
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, but- tweld and screwed ends to BS5352
Materials can be changed to customer speci- fications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not rec- ommended for use above 425ºC. If in doubt please ask, we will advise suit- able materials for the temperature, pressure and media.
Dimensions
Valve Size DN
DN8/¼” DN15/½” DN20/¾” DN25/1” DN40/1½”
Dim A in 4.25” 4.25” 4.60” 5.00” 6.50”
Dim B in 9.50” 9.50” 9.50”
10.00” 14.50”
Dim C in 3.95” 3.95” 3.95” 3.95” 5.90”
Weight lb 19.8 19.8 19.8 21.2 52.9 55.1
Cv IGP
M 1.7 2.45 2.45 5.8
12.4 18.5
Material Specification
Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush
Stainless Steel Valve St.St. ASTM A182 F316H St.St. ASTM A182 F316H Integral Hard Faced St. St. - Hard Faced St.St. ASTM A182 F316H Incolloy 800H or 800HT Exfoliated Graphite Aluminium Bronze
Service Temperature
ºF 100 200 300 400 500 600 700 900
1100 1300 1500
Service Pressure psi g 1440 1240 1120 1030 955 905 865 790 645 275 85
Class 800/900/1500 bellows sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection.
Nuclear versions to ASME III available.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Component Material Carbon Steel Valve Stainless Steel Valve
Body C.St. ASTM A105 St.St. Type 316L Bonnet C.St. ASTM A105 St.St. Type 316L
Seat St.St. Type 410 or integral Stellite HF
St.St. Type 410 or integral Stellite HF
Disk St.St. Type 410 or Stellite HF
St.St. Type 410 or Stellite HF
Stem St.St. Type 316L St.St. Type 316L Bellows St.St. Type 316L St.St. Type 316L Back up Gland Exfoliated graphite Exfoliated graphite Yoke Bush Aluminium bronze Aluminium bronze
Class 600/900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, version also available - seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperatures up to 320 oC. Materials can be changed to customer specifications.
Dimensions Size Dim A Dim B Weight Cv DN mm mm Kg UKGPM 6 229 242 13 2
Class 800/900/1500 bellows sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection.
Nuclear versions to ASME III available.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Component Material Carbon Steel Valve Stainless Steel Valve
Body C.St. ASTM A105 St.St. Type 316L Bonnet C.St. ASTM A105 St.St. Type 316L
Seat St.St. Type 410 or integral Stellite HF
St.St. Type 410 or integral Stellite HF
Disk St.St. Type 410 or Stellite HF
St.St. Type 410 or Stellite HF
Stem St.St. Type 316L St.St. Type 316L Bellows St.St. Type 316L St.St. Type 316L Back up Gland Exfoliated graphite Exfoliated graphite Yoke Bush Aluminium bronze Aluminium bronze
Seal Welded Bonnet Valve - Straight Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions (typical) Class 150/300/600 Class 900/1500
Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order.
Material Specification Carbon Steel Valve Stainless Steel Valve
Body & Bonnet
C.St. ASME SA350 LF2 orC.St. ASME SA352 LCB
St.St. ASME SA182 F316L or St.St. ASME SA351 CF3M
Seat Integral Hard Facing Integral Hard Facing Disk St.St. Type 316L with Hard Facing St.St. Type 316L with Hard Facing Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075 Bellows Inconel 600/625 Inconel 600/625 Gland Exfoliated Graphite Exfoliated Graphite Bush Aluminium Bronze Aluminium Bronze
Seal Welded Bonnet Valve - Oblique Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet.
Available with Integral Hard Faced Seat to offer increased resistance against corrosion.
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials.
Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352.
Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order.
Material Specification Carbon Steel Valve Stainless Steel Valve
Body & Bonnet C.St. ASTM A105 St.St. BS1503 304S11
Seat St.St. Type 410 or Integral Stellite Hard Facing
St.St. Type 410 or Integral Stellite Hard Facing
Disk St.St. Type 410 or Stellite Hard Facing
St.St. Type 410 or Stellite Hard Facing
Stem St. St. Type 304 St. St. Type 304 Bellows St. St. Type 304 St. St. Type 304 Gland Exfoliated Graphite Exfoliated Graphite Bush Aluminium Bronze Aluminium Bronze
Seal Welded Bonnet Valve - Angle Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III
Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or Screwed in Stainless Steel Seat
Valve can be supplied with Actuator - Electric or Pneumatic.
Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ºC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. DN65/DN80/DN100 normally cast body and bonnet. Forged available.
Dimensions (typical) Class 150/300/600 Class 900/1500
Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order.
Material Specification Carbon Steel Valve Stainless Steel Valve
Body & Bonnet
C.St. ASME SA350 LF2 orC.St. ASME SA352 LCB
St.St. ASME SA182 F316L or St.St. ASME SA351 CF3M
Seat Integral Hard Facing Integral Hard Facing Disk St.St. Type 316L with Hard Facing St.St. Type 316L with Hard Facing Stem St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075 Bellows Inconel 600/625 Inconel 600/625 Gland Exfoliated Graphite Exfoliated Graphite Bush Aluminium Bronze Aluminium Bronze
Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.
Valve shown is with a leak detection port, to provide early warning of any bellows failure. Extended spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Pneumatically actuated valves are available.
Class 900 Manually Operated Electrically Operated
Size Dim A Dim B Weight Dim D Dim E Weight Cv DN mm mm Kg mm mm Kg UKGPM
Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.
Valve shown is with a leak detection port, to provide early warning of any bellows failure. Extended spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Pneumatically actuated valves are available.
Class 900 Manually Operated Electrically Operated
Size Dim A Dim B Weight Dim D Dim E Weight Cv DN mm mm Kg mm mm Kg UKGPM
Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.
Valve shown is with a leak detection port, to provide early warning of any bellows failure. Extended spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Pneumatically actuated valves are available.
Class 900 Manually Operated Electrically Operated
Size Dim A Dim B Weight Dim D Dim E Weight Cv DN mm mm Kg mm mm Kg UKGPM
CARTRIDGE VALVE TECHNICAL DATA SHEET BELLOWS SEALED STOP AND STOP/CHECK VALVE SERIES 40A
103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data
Working Pressure 103.4 Bar / 1500 psi Working Temperature Min –20ºC/-4ºF - Application Medium •Air •Oil •Gas •WaterQuality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105 or Monel Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44 or Monel Bellows Material Stainless Steel type 316L, Inconel 600/625 Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel or PEEK Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel Handwheel Material Aluminum, Stainless Steel or Iron
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
CARTRIDGE VALVE TECHNICAL DATA SHEET BELLOWS SEALED STOP AND STOP/CHECK VALVE SERIES 40B
103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data
Working Temperature Min –20ºC/-4ºF - - Max 326ºC/619ºF Applications Medium •Air •Oil •Gas •WaterQuality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105 or Monel Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44 or Monel Bellows Material Stainless Steel type 316L, Inconel 600/625 Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel or PEEK Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel Handwheel Material Aluminum, Stainless Steel or Iron
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
Design Specification DEF STAN 02-375 and ANSI B16.34 Working Pressure 103.4 Bar / 1500 psi
claudia.madrigal2
Line
Bellows Sealed Angle Pattern Globe Valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve seals suitable for temperatures up to 320 oC. Materials can be changed to customer specifications.
Dimensions Size Dim A Dim B Dim C Dim D Dim E Weight DN mm mm mm mm mm Kg 8 45 200 32 101 102 8
CARTRDIGE VALVE TECHNICAL DATA SHEET STOP AND STOP/CHECK VALVE SERIES 50A
103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data
103.4 Bar / 1500 psi Working Temperature Min –20ºC/-4ºF - - Max 326ºC/619ºF
Application Medium Air •Oil •Gas •Water Quality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105, Monel or Ni Al Br DEF STAN 02-833 pt2 Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44, Monel or Ni Al Br Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel, PEEK or Ni
Al Br Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel Handwheel Material Aluminum, Stainless Steel or Iron
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
CARTRIDGE VALVE TECHNICAL DATA SHEET STOP AND STOP/CHECK VALVE SERIES 50B
103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data Design Specification DEF STAN 02-375 and ANSI B16.34 Working Pressure Working Temperature Min –20ºC/-4ºF - - Max 326ºC/619ºF
Application Medium •Air •Oil •Gas •WaterQuality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105, Monel or Ni Al Br DEF STAN 02-833 pt2 Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44, Monel or Ni Al Br Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel, PEEK or Ni
Al Br Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel Handwheel Material Aluminum, Stainless Steel or Iron
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
Angle Pattern Globe Class 800 gland sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection.
Nuclear versions to ASME III available.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Dimensions Size Dim A Dim B Dim C Weight Cv DN mm mm mm Kg UKGPM 6 57 241 100 9 2.7
Class 800 non-return valve to BS5352, standard bore, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
CARTRIDGE VALVE TECHNICAL DATA SHEET CHECK VALVE SERIES 50D1 103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data
103.4 Bar / 1500 psi Working Temperature Min –20ºC/-4ºF - - Max 326ºC/619ºF Application Medium •Air •Oil •Gas •WaterQuality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105, Monel or Ni Al Br DEF STAN 02-833 pt2 Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44, Monel or Ni Al Br Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel, PEEK or Ni
Al Br Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
CARTRIDGE VALVE TECHNICAL DATA SHEET CHECK VALVE SERIES 50D2 103.4 Bar 1500 psi (Class 600)
Replaceable Cartridge
Forged Valve Body
Technical Data
Working Temperature Min –20ºC/-4ºF - - Max 326ºC/619ºF
Application Medium Air •Oil •Gas •Water Quality Assurance Level EN 10204, 3.1b also Full traceability – MIC Level 1 Cleaning TP102, Oxygen cleaning to MIL-STD-1330 or MIL-STD-1622 Hydrostatic Test 156 Bar / 2262psi Valve Closure Test 114 Bar / 1653psi Shock Qualification To be verified by test to customer’s requirements e.g. MIL-S-901D Vibration Qualification To be verified by test to customer’s requirements e.g. MIL-STD-167-1 Leakage Class Bubble Tight as per ANSI Class VI Valve Body Material Forged Stainless Steel type 316L, Super Austenitic type F44, Carbon Steel
type A105, Monel or Ni Al Br DEF STAN 02-833 pt2 Main Cartridge Components Material Stainless Steel type 316L, Super Austenitic type F44, Monel or Ni Al Br Seals Material Perlast / Kalrez Seat Material Stainless Steel type 316L, Super Austenitic type F44, Monel, PEEK or Ni
Al Br Nuts/Studs Material Stainless Steel NES 862/ASME 194/ASTM A193/ MIL-S-1222/Monel
Connection Type Cartridge flanged to housing. Housing socket weld ends, buttweld ends or flanged
OVERALL DIMENSIONS (CARTRIDGE AND VALVE BODY) Product
Design Specification DEF STAN 02-375 and ANSI B16.34 Working Pressure 103.4 Bar / 1500 psi
claudia.madrigal2
Line
Class 600 bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, union bonnet Available with integral seat or screwed in stainless steel seat or soft seated with O ring in disk Valve can be supplied with pneumatic actuator Butt weld end connections shown, also available as screwed, socket weld, flanged or any special connection.
Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials.
Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie.
C.st. ASTM A105 is not recommended for use above425 oC.If in doubt please ask, we will advise suitable materialsfor the temperature, pressure and media.
Dimensions Size Dim A Dim B Dim C Weight DN mm mm mm Kg 6 101.6 180 100 3.5 10 101.6 180 100 3.5 15 108 190 100 4 20 117 195 100 4 25 127 200 100 4.5
Component Material Body St.St. Type 316L Bonnet St.St. Type 316L Seat St.St. Type 316L or integral Disk St.St. Type 316L with/without Viton seal Stem St.St. Type 316L Gland Bush St.St. Type 316L Back up Gland PTFE Yoke Bush Aluminium Bronze
Class 900 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Bolted and lip-seal welded Bonnet. ASME III option available. Secondary Gland in the event of bellows failure. Available with Integral Hard Faced Seat to offer increased resistance against erosion. Valve can be supplied with manual operation or Actuated - Electric or Pneu- matic. Manual Valve and Electrically Actuated Valve shown
Valve Shown is with a leak detection port, to provide early warning of any bellows failure. Extended Spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Pneumatically Actuated valves are available.
Materials
Body Bonnet Seat
Disk
Stem Bellows Back up Gland Yoke Bush
316 Stainless Steel St.St. ASME SA182 F316 St.St. ASME SA182 F316 St.St. ASME SA479 F316 or Integral Stellite hard faced St.St. ASME SA479 F316 or St.St. Type 316 hard faced St.St. ASME SA479 F316 St.St. Type 316/316L Exfoliated Graphite Aluminum Bronze
304 Stainless Steel St.St. ASME SA182 F304 St.St. ASME SA182 F304 St.St. ASME SA479 F304 or Integral Stellite hard faced St.St. ASME SA479 F304 or St.St. Type 304 hard faced St.St. ASME SA479 F304 St.St. Type 316/316L Exfoliated Graphite Aluminum Bronze
Class 900 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Bolted and lip-seal welded Bonnet, with universal joint extended spindle. ASME III option available. Secondary Gland in the event of bellows failure. Available with Integral Hard Faced Seat to offer increased resistance against erosion. Valve can be supplied with manual operation or Actuated - Electric or Pneumatic. Manual Valve shown
Materials Valve Shown is with a leakdetection port, to provide early warning of any bellows failure. Extended Spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Extended spindle shown is with intermediate seal/support at the bulge wall level. Design without intermediate stage are available.
Body Bonnet Seat
Disk
Stem Bellows Back up Gland Yoke Bush
316 Stainless Steel St.St. ASME SA182 F316 St.St. ASME SA182 F316 St.St. ASME SA479 F316 or Integral Stellite hard faced St.St. ASME SA479 316 or St.St. Type 316 hard faced St.St. ASTM A182 F316 St.St. Type 316 Exfoliated Graphite Aluminum Bronze
304 Stainless Steel St.St. ASME SA182 F304 St.St. ASME SA182 F304 St.St. ASME SA479 F304 or Integral Stellite hard faced St.St. ASME SA479 F304 or St.St. Type 304 hard faced St.St. ASTM A182 F304 St.St. Type 316 Exfoliated Graphite Aluminum Bronze
Class 2500 Bellows Sealed Globe Valve designed to ASME III, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Seal Welded Bonnet version available.
Also available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat.
Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection Cartridge Valve, seat and all seals are removed with the top assembly. This leaves only body left in line. Maintainence time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.
Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.
Variants - A: Nuclear to ASME III Class I, II or III. Non-cartridge Seal Welded Bonnet for Liquid Metal Applications. Non-Cartridge Cryogenic version with/without vacuum jacket. Soft seat, metal seat, hard faced seat and integral seat options. Electric, Pneumatic or Hydraulic actuation. Bespoke End Connections. Extended Spindle to remove handwheel (or actuator) from Hot/Cold or active area.
Variants - C: Nuclear to ASME III Class I, II or III. Cartridge Version. Soft seat, metal seat, hard faced seat and integral seat options. Bespoke End Connections. Tight shut-off at low pressure version available.
Variants - B: Nuclear to ASME III Class I, II or III. Cartridge Version Cartridge Cryogenic version with/without vacuum jacket. Soft seat, metal seat, hard faced seat and integral seat options. Electric, Pneumatic or Hydraulic actuation. Bespoke End Connections. Extended Spindle to remove handwheel (or actuator) from Hot/Cold or active area.
Variants - D: Nuclear to ASME III Class I, II or III. Non-cartridge Seal Welded Bonnet for Liquid Metal Applications. Soft seat, metal seat, hard faced seat and integral seat options. Bespoke End Connections.