8/9/2019 Valve Guide 2
1/15
VALVE GUIDE
8/9/2019 Valve Guide 2
2/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
ALIGN NOTCH ON TRUNNION AS SHOWN
NOTE: POSITION SHOWN WITH BALL OPEN.
POSITION D
INLET OUTLET
ALIGN NOTCH ON TRUNNION AS SHOWN
NOTE: POSITION SHOWN WITH BALL
INLET OUTLET
ALIGN NOTCH ON TRUNNION AS SHOWN
NOTE: POSITION SHOWN WITH BALL OPEN.
INLET OUTLET
ALIGN NOTCH ON TRUNNION AS SHOWN
INLET OUTLET
NOTE: POSITION SHOWN WITH BALL OPEN.
POSITION CPOSITION A
POSITION B
1 6 : 1
16:1
1 6 : 1
1 6 : 1
Electric Actuator Positions & Gear Actuator
N
C
J
Q
W
X
OPPOSITE PUMP SIDE (O
STANDARD
PUMP SIDE (INLET) OPENVALVE TOREMOVE
O P E N V A L V E T O R E M O V E
WITH THE VALVE CLOSED.ALL HANDLE POSITIONS SHOWN ARE
Handle Positions Clock Wise To Open
V
K
M
H
G
P
OPPOSITE PUMP SIDE (OPUMP SIDE (INLET) OPENVALVE TOREMOVE
O P E N V A L V E T O R E M O V E
WITH THE VALVE CLOSED.ALL HANDLE POSITIONS SHOWN ARE
Handle Positions Counter Clock Wise To Open
SWING-OUT VALVE ORDERING GUIDE To place an order, state the style number, inletand outlet adapters needed (always list inletadapter first), and the type of handle/actuator.See Valve Guide on reverse side for adapterlists. All threaded adapters require threadinformation. Rigid female adapters areavailable only with tapered pipe thread(NPT). Hose threaded adapters will besupplied with National Hose (NH) threadunless otherwise specified.
Style Description Ball Type Actuators
8620 2 Generation II Heavy Duty Non-Locking Swing-Out Valve Stainless Steel SZ, R/S, EA or GA8625 2 1/2 Generation II Heavy Duty Non-Locking Swing-Out Valve Stainless Steel SZ, R/S, EA or GA8630 3 Generat ion II Heavy Duty Non-Locking Swing-Out Valve Stainless Steel SZ, R/S, EA or GA8635 3 1/2 Generation II Heavy Duty Non-Locking Swing-Out Valve Stainless Steel SZ, R/S, EA or GA
8810 1 Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, TS, TSC
8815 1 1/2 Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, TS, TSC8820 2 Generat ion II Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, SZ, TS, or TSC8825 2 1/2 Generation II Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, SZ, TS, or TSC8830 3 Generat ion II Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, SZ, TS, or TSC8835 3 1/2 Generation II Heavy Duty Self Locking Swing-Out Valve Stainless Steel R1, SZ, TS, or TSC8840 4 Heavy Duty Self Locking Swing-Out Valve Bronze, Flat Air, EA or GA
8910 1 Heavy Duty Self Locking Swing-Out Valve Fusion CF R1, TS, TSC8915 1 1/2 Heavy Duty Swing-Out Valve Fusion CF R1, TS, TSC8920 2 Generation II Heavy Duty Swing-Out Valve Fusion CF R1, TS, TSC, SZ, R/S, EA or GA8925 2 1/2 Generation II Heavy Duty Swing-Out Valve Fusion CF R1, TS, TSC, SZ, R/S, EA or GA8930 3 Generation II Heavy Duty Swing-Out Valve Fusion CF R1, TS, TSC, SZ, R/S, EA or G8935 3 1/2 Generation II Heavy Duty Swing-Out Valve Fusion CF R1, TS, TSC, SZ, R/S, EA or GA8940 4 Heavy Duty Swing-Out Valve Fusion CF Air, EA or GA
Valve BodySelect style number from chart
Inlet Adapter Select from adapter list
Outlet AdapterSelect from adapter list
Enter CH to specify chrome
option where available. Refer to adapter list foravailability. Leave Blank for Standard Cast Finish
Specify Actuator Select from actuator chart above
Specify Actuator Position See chart at right for positions.N is standard for manual actuators
Optional Slo-ClozEnter SC to specify or leave blank for no Slo-Cloz
P1-S8925 ME1-S CH TS N
Example shown is a 2 1/ 2" valve with composite ball. It has a P1-S inlet adapter anda ME1-S outlet adapter, with chrome plating. The valve has a TS handle in standardposition N and does not have Slo-Cloz installed.* For special congurations, contact Akron Brass customer service
Actuator/Handle
Inlet/Pump SideAdapte (SeeAdapter List)
Body Outlet Adapter(See Adapter List)
Optional: Defaults Are Shown
Actuator/Handle Type
OptionsOrderCode
R1 R1TS TS
TSC TSCSZ SZ
Gear Actuator GAElectric Actuator EA
Rack & Sector RS
Valve Guide
8/9/2019 Valve Guide 2
3/15
8/9/2019 Valve Guide 2
4/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
Rigid NPT
STYLESIZE
1" (25 mm) 11 2" (38 mm) 2" (50 mm) 2 1 2" (65 mm) 3" (75 mm) 3 1 2" (89 mm) 4" (100 mm)
M1-S
A 121
32" (42 mm) 1 5
16" (33 mm) 15
8" (41 mm) 2" (51 mm) 21
/ 16" (52 mm) 27
/ 32" (56 mm) 221
/ 32" (75 mm)B - - - - - -
C - - - - - -
M12-S
A - - 115 16" (49 mm) - 3 3 4" (95 mm) - -
B - - - - - - -
THREAD - - 21 2" NPT (64 mm) - 4" NPT (102 mm) - -
P1-S
A 11 8" (29 mm) 11 8" (29 mm) 11 4" (32 mm) 17 8" (48 mm) 17 8" (48 mm) 2" (51 mm) 21/ 8" (54 mm)
B - - - - - - -
C - - - - - - -
* P2-S
A - 3 3 8" (86 mm) 3 1 4" (83 mm) 319/ 32" (91 mm) 37 16" (87 mm) 4" (102 mm) 45/ 16" (110 mm)
B - 15 8" (41 mm) 13 8" (35 mm) 13 8" (35 mm) 13 8" (35 mm) 13 8" (35 mm) 13 8" (35 mm)
C - 13 8" (35 mm) 21 8" (54 mm) 21 8" (54 mm) 2 1 8" (54 mm) 21 8" (54 mm) 219/ 32" (66 mm)
*P2-SE
A - - - 4 3 16" (106 mm) - - -
B - - - 13 4" (44 mm) - - -
C - - - 2 15 32" (63 mm) - - -
P10-S
A - 11 4" (32 mm) 21 32" (52 mm) 35 16" (84 mm) - - -
B - - - - - - -
THREAD - 2" NPT (51 mm) 21 2" NPT (64 mm) 3" NPT (76 mm) - - -
* P12-S
A - - - - 3 3 4" (95 mm) - -
B - - - - 13 8" (35 mm) - -
THREAD - - - - 4" NPT (102 mm) - -
P20-SF
A - - 3 5 32" (80 mm) 3 7 16" (87 mm) 4" (102 mm) - 4" (102 mm)
THREAD - - 2" NPT (51 mm)2 1/ 2" VIC (64 mm)2 1/ 2" NPT (64 mm)
3" VIC (76 mm) 3" NPT (76 mm) - 4" NPT (102 mm)
For Flow Meter
### P30-SCV
A - 5 5 8" (143 mm) 527 32"(148 mm) 6 1 4" (159 mm) 71 2" (191 mm) - -
B - 121 32" (42 mm) 37 8" (98 mm) 4 9 32" (109 mm) 415 16" (125 mm) - -
THREAD 11/ 2" NPT (34 mm)2" VIC (51 mm) 2" NPT (51 mm) 2
1 2" NPT (64 mm) 3" NPT (76 mm) - -
Built-in Check Valve
P40-SCV
A - - - - 6 1 16" (154 mm) - -
THREAD 3 NPT x 4 Victaulic (76 x 102 mm)
Built-in Check Valve
B
AC
A = Overall lengthB = Length to centerline
of drain holeC = Length to edge
of drain boss
BA
A = Valve flange to centerline of elbowB = Pump flange to
centerline of elbow
Discharge & Intake Adapters Pump Elbow Adapters
Valve Dimension KeyKEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
*** 3/ 4" NPT tap
30 Angle
90 Angle
Includes Strainer + Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3) 3/ 4" NPT Taps
Available in Cast or Chrome
# For spacing only. 4 3/ 8" BCD each end.## For use when replacing a 7840 with an 8840. Each adapter is 1" thick.
### (2)3/ 4" NPT Taps and (1) 1" NPT Tap
Valve Guide
8/9/2019 Valve Guide 2
5/15
Male Discharge Adapters
STYLESIZE
1" (25 mm) 11/ 2" (38 mm) 2" (51 mm) 21/ 2" (64mm) 3" (76 mm) 3
1/ 2" (89 mm) 4" (102 mm)
M1-S
A 111/ 16" (42 mm) 15/ 16" (33 mm) 15/ 8" (41 mm) 2" (51 mm) 17/ 8" (48 mm) 17/ 8" (48 mm) 2 21/ 32" (67 mm)
B - - - - - - -
C - - - - - - -
M2-S
A - - 115/ 16" (49 mm) - - - -
B - - - - - - -
THREAD - - 21/ 2" NH
(64 mm) - - - -
*M3-S
A - - - 3 3/ 16" (81 mm) 35/ 16" (84 mm) 5" (127 mm) 319/ 32" (91 mm)
B - - - 13/ 8" (35 mm) 13/ 8" (35 mm) 13/ 8" (35 mm) 113/ 16" (46 mm)
C - - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 5/ 8" (67 mm)
*M4-S
A - - - 5" (127 mm) 5" (127 mm) - 83/ 4" (222 mm)
B - - - 13/ 8" (35 mm) 13/ 8" (35 mm) - 113/ 16" (46 mm)
C - - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) - 2 15/ 32" (63 mm)
*M6-S
A - - - 10" (254 mm) - - -
B - - - 13/ 8" (35 mm) - - -
C - - - 2 1/ 8" (54 mm) - - -
*M7-S
A - - - 6 1/ 2" (165 mm) - - -
B - - - 13/ 8" (35 mm) - - -
C - - - 2 1/ 8" (54 mm) - - -
*M8-S
A - - 2 7/ 8" (73 mm) - - - -
C - - 1 17/ 64" (32 mm) - - - -
THREAD - - 11/ 2 NH
(38 mm) - - - -
* M10-S
A - - 3 7/ 32" (82 mm) - - - -
B - - 125/ 64" (35 mm) - - - -
THREAD - - 21/ 2" NH
(64 mm) - - - -
* ME1-S
A - - - 6 5/ 8" (168 mm) 7" (178 mm) 73/ 16" (183 mm) 93/ 4" (248 mm)
B - - - 13/ 8" (35 mm) 13/ 8" (35 mm) 13/ 8" (35 mm) 15/ 8" (41 mm)
C - - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 5/ 16" (59 mm)
** ME2-S
A - - - - - 5 1/ 8" (130 mm) -
B - - - - - 1 3/ 8" (35 mm) -
C - - - - - 2 1/ 8" (54 mm) -
* ME3-S
A - - - 10 5/ 16" (278 mm) 103/ 8" (264 mm) 103/ 16" (259 mm) -
B - - - 13/ 8" (35 mm) 13/ 8" (35 mm) 13/ 8" (35 mm) -
C - - - 21
/ 8" (54 mm) 21
/ 8" (54 mm) 21
/ 8" (54 mm) -
* ME4-S
A - - - 125/ 16" (313 mm) - - -
B - - - 13/ 8" (35 mm) - - -
C - - - 2 1/ 8" (54 mm) - - -
* ME5-S2 1 2"
Thread
A - - - - 6 7/ 8" (175 mm) - -
B - - - - 13/ 8" (35 mm) - -
C - - - - 2 1/ 8" (54 mm) - -
MES1-S
A - 3 7/ 32" (82 mm) 3 3/ 8" (86 mm) 5 3/ 16" (132 mm) - - -
B - - - - - - -
C - - - - - - -
KEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
*** 3/ 4" NPT tap
30 Angle
90 Angle
Includes Strainer
+ Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3)3/ 4" NPT Taps
Available in Castor Chrome
# For spacing only. 43/ 8" BCD each end.
## For use whenreplacing a 7840with an 8840. Eachadapter is 1" thick.
### (2)3/ 4" NPT Taps and(1) 1" NPT Tap
Valve Guide
8/9/2019 Valve Guide 2
6/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
Female Intake Adapters Chrome Swivels (Hose Thread)
STYLESIZE
1 1/ 2" (38 mm) 2" (51 mm) 21/ 2" (64 mm) 3" (76 mm) 3 1/ 2" (89 mm) 4" (102 mm)
F1-S
A 13/ 4" (44 mm) - 2 15/ 16" (75 mm) 2 15/ 16" (75 mm) 2 5/ 8" (67 mm) 35/ 8" (92 mm)
B - - - - - -
C - - - - - -
*F2-S
A - - 3 1/ 2" (89 mm) 3 3/ 4" (95 mm) 5 1/ 2" (140 mm)
B - - 13/ 8" (35 mm) 13/ 8" (35 mm) 113/ 16" (46 mm)
C - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 17/ 32" (64 mm)
*F3-S
A - - 5 1/ 2" (140 mm) 51/ 2" (140 mm) -
B - - 13/ 8" (35 mm) 13/ 8" (35 mm) -
C - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) -
F1-SS
A 13/ 4" (44 mm) - 2 15/ 16" (75 mm) 2 15/ 16" (75 mm) 2 5/ 8" (67 mm) 35/ 8" (92 mm)
B - - - - - -
C - - - - - -
* F2-SS
A - - 3 1/ 2" (89 mm) 3 3/ 4" (95 mm) 4 1/ 2" (114 mm) 51/ 2" (140 mm)
B - - 13
/ 8" (35 mm) 13
/ 8" (35 mm) 13
/ 8" (35 mm) 113
/ 16" (46 mm)
C - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 17/ 32" (64 mm)
* F3-SS
A - - 5 1/ 2" (140 mm) 51/ 2" (140 mm) 51/ 2" (140 mm) -
B - - 13/ 8" (35 mm) 13/ 8" (35 mm) 13/ 8" (35 mm) -
C - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) -
* F4-SS2 12"
swivel
A - - - 3 13/ 16" (97 mm) - -
B - - - 13/ 8" (35 mm) - -
C - - - 2 1/ 8" (54 mm) - -
* F5-SS2 12"
swivel
A - - - 51
/ 2" (140 mm) - -
B - - - 13/ 8" (35 mm) - -
C - - - 2 1/ 8" (54 mm) - -
*** F6-SS4" swivel
A - - - 4" (102 mm) - -
B - - - 13/ 8" (35 mm) - -
C - - - 2 3/ 32" (53 mm) - -
*** F12-SS
A - 4 5/ 8" (117 mm) - - - -
B 125/ 64" (35 mm)
THREAD - 21/ 2" NH
(64 mm)- - - -
** FE2-SS
A - - - - 6 3/ 4" (171 mm) -
B - - - - 13/ 8" (35 mm) -
C - - - - 2 1/ 8" (54 mm) -
* FE3-SS
A - - 7 1/ 8" (181 mm) 73/ 4" (197 mm) 77/ 8" (200 mm) -
B - - 13/ 8" (35 mm) 13/ 8" (35 mm) 13/ 8" (35 mm) -
C - - 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) 2 1/ 8" (54 mm) -
** FE6-SS
A - - 10 3/ 4" (273 mm) - - -
B - - 13/ 8" (35 mm) - - -
C - - 2 1/ 4" (57 mm) - - -
KEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
***3
/ 4" NPT tap 30 Angle
90 Angle
Includes Strainer
+ Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3)3/ 4" NPT Taps
Available in Castor Chrome
# For spacing only. 43/ 8" BCD each end.
## For use whenreplacing a 7840with an 8840. Eachadapter is 1" thick.
### (2)3/ 4" NPT Taps and(1) 1" NPT Tap
Valve Guide
8/9/2019 Valve Guide 2
7/15
Flex Hose, Solder & Victaulic Adapters
STYLESIZE
1" (25 mm) 11/ 2" (38 mm) 2" (51 mm) 21/ 2" (64 mm) 3" (76 mm) 31/ 2" (89mm) 4" (102 mm)
F L E X
P1-SH
A - - - 17 8" (48 mm) 115 16"
(49 mm) -2 5 16"
(59 mm)
B - - - - - - -
C - - - - - - -
P12-SH
A - - - - 115 16"
(49 mm) - -
3" Adapter with 4" Flex Connection
PA-SH
A - - - - 2 1 4"
(57 mm) - -
B - - - - - - -
Angle - - - - 4 - -
PO-SH
A - - - - 21 4"
(57 mm) - -
B - - - - - - -
Angle - - - - 4 - -
S O L D E R
P3-S
A 11 8"
(29 mm)13 32"
(26 mm) 11 4" (32 mm) 17 8" (48 mm) 1
7 8"(48 mm) - -
B - - - - - - -
C - - - - - - -
V I C T A U L I C
V1-S
A 111 16"
(43 mm) 13 4" (44 mm) 1
29 32"(48 mm)
129 32"(48 mm)
2 3 32" (53 mm)
2 5 32" (53mm)
2 1 4"(57 mm)
B - - - - - - -
C - - - - - - -
* V3-S
A - 3 5 16" (84 mm) 31 4"
(83 mm) 33 16" (81 mm) 3
5 16"(84 mm) - 4" (102 mm)
B - 13 8" (35 mm) 13 8"
(35 mm) 13 8" (35 mm) 1
3 8"(35 mm) -
115 16"(49 mm)
C - - - - - - -
* V4-S
A - - - 3 1 2" (89 mm) - - -
B - - - 13 8" (35 mm) - - -
C - - - 2 1 8" (54 mm) - - -
2 1 2" (64 mm) with 3" (76 mm) Victaulic
VT1-S
A - - - - 25 32"
(52 mm) -2 11 32"
(60 mm)
3" (76 mm) has 3" (76 mm) NPT + 4" (102 mm) Victaulic
4" (102 mm) has 4" (102 mm) NPT + 5" (127 mm) Victaulic
* VT3-S
A - - - - 37 16"
(87 mm) - -
B - - - - 13 8"
(35 mm) - -
C - - - - 21 8"
(54 mm) - -
3" (76 mm) NPT with 4" (102 mm) Victaulic
VE1-S* 2"
*** 1 1/2"
A - 3 5 8" (92 mm) 33 4"
(95 mm) - - -
B - 3" (76 mm) 3" (76 mm) - - - -
C - - - - - - -
* VE2-S
A - - 53 4"
(146 mm) - - - -
B - - 231 32"
(75 mm) - - - -
C - - - - - - -
V20-SFFor Flow
Meter
A - - 3 3 16" (81 mm) 33 16" (81 mm) 41 4"
(108 mm) - -
B - - 1 1 4" (32 mm) 11 4" (32 mm) 15 8" (41 mm) - -
THREAD - - 2" VIC (51 mm) 2" VIC (51 mm) 3" VIC (76 mm) - -
###V30-SCV
A - - 527 32"
(148 mm) 61 4" (159 mm) 71 2" (191 mm) - -
B - - 37 8"
(98 mm)4 9 32"
(109 mm)4 15 16"
(125 mm) - -
Built-in Check Valve
VES1-S
A - - 33/ 8" (86 mm) 5 3/ 16" (132 mm) - - -B - - - - - - -
C - - - - - - -
KEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
***3
/ 4" NPT tap 30 Angle
90 Angle
Includes Strainer
+ Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3)3/ 4" NPT Taps
Available in Castor Chrome
# For spacing only. 43/ 8" BCD each end.
## For use whenreplacing a 7840with an 8840. Eachadapter is 1" thick.
### (2)3/ 4" NPT Taps and(1) 1" NPT Tap
Valve Guide
8/9/2019 Valve Guide 2
8/15
8/9/2019 Valve Guide 2
9/15
Pump Flange Adapters (Waterous Pump Use)
STYLE SIZE
2" (51 mm) 21 2" (64 mm) 3"/31 2"
(76/89 mm) 4" (102 mm) ANGLE BOLT HOLE BOLT CIR. DIA.
B1-S
A 2 5 8" (67 mm) 2 5 8" (67 mm) 2 7 8" (73 mm) - - 4(8 on 2") 43 8" (111 mm)
B - - - - - - -
C - - - - - - -
B1-SX
A - 2 5 8" (67 mm) - - - 4 slots 4 3 8" (111 mm)B - - - - - - -
C - - - - - - -
B3-SBoth flanges 43/ 8"
BCD
A - 2 5 8" (67 mm) - - - 4 4 3 8" (111 mm)B - - - - - - -
Not for valve attachment
+++ B4-S
A - 2 5 8" (67 mm) 2 7 8" (73 mm) - - 8 4 3 8" (111 mm)B - - - - - - -
C - - - - - - -
B5-S
A - 4 5 8" (117 mm) - - - 4 slots & 4holes 43 8" (111 mm)
A - - 4 1 2" (114 mm) - - 4 slots 43 8" (111 mm)B - - - - - - -
+++ B6-S
A - 6" (152 mm) - - - 8 43 8" (111 mm)B - - - - - - -
C - - - - - - -
B7-S
A - 5.5 (140 mm) - - - 4 slots & 4holes 43 8" (111 mm)
B1-SH
A -5 8"-11/ 8"
(16-29 mm)11/ 16"-13 16"(17-30 mm) - 4 8 6
5 8" (168 mm)
B - - - - - - -C - - - - - - -
B1-SH (4")
A - - - 2" Total (51 mm) 4 8 65 8" (168 mm)B - - - - - - -
C - - - - - - -
B2-SH
A - 11 16" (17 mm) - - - 4 43 8" (111 mm)B - - - - - - -
C - - - - - - -
STYLESIZE
2 1 2" (64 mm) 3"/3 1 2" (76/89 mm) 4" (102 mm) ANGLE BOLT HOLES BOLT CIR. DIA.
VAL VE DO WN
++ HD21-SFUP or DN
For Flow Meter
A 6 1 4" (159 mm) - - 520' 4 43 8" (111 mm)
B 31 8" (79 mm) - - - - -
C - - - - - -
++ SE1-S
A 3 1 4" (83 mm) 2 3 4" (70 mm) - 90 4 4 3 8" (111 mm)
B 51 4" (133 mm) 6" (152 mm) - - - -
C - - - - - -
++ SE2-S
A 5 1 4" (133 mm) 43 4" (121 mm) - 90 4 43 8" (111 mm)
B 51 4" (133 mm) 6" (152 mm) - - - -
C - - - - - -
++ SE3-S
A 2 1 2" (64 mm) - - 90 4 4 3 8" (111 mm)
B 7 3 4" (197 mm) - - - - -
C - - - - - -
SE4-S
A 8.5" (216 mm) - - - 4 43 8" (111 mm)
B 6" (152 mm) - - - - -
C - - - - - -
DE3-S
A - 4 15 16" (125 mm) 415 16" (125 mm) 94 8 53 4" (146 mm)
B - 5 3 16" (132 mm) 5" (127 mm) - - -
C - - - - - -
Pump Flange Adapters (Hale Pump Use) ...Continued
KEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
*** 3/ 4" NPT tap
30 Angle
90 Angle
Includes Strainer
+ Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3)3/ 4" NPT Taps
Available in Castor Chrome
# For spacing only. 43/ 8" BCD each end.
## For use whenreplacing a 7840with an 8840. Eachadapter is 1" thick.
### (2)3/ 4" NPT Taps and(1) 1" NPT Tap
Valve Guide
8/9/2019 Valve Guide 2
10/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
STYLE SIZE
2" (51 mm) 21 2" (64 mm) 3"/31 2"
(76/89 mm) 4" (102 mm) ANGLE BOLT HOLE BOLT CIR. DIA.
B3-SH
A - -13/ 16"-111 32"(21-34 mm)
- 4 47 25 32"
(198 mm)B - - - - - - -C - - - - - - -
B3-SH (4")
A - - - 2" Total (51 mm) 4 4 725 32" (198
mm)
B - - - - - - -C
B1-SWClamps
A - 127 32" (47 mm) 127 32" (47 mm) - - 4 4 3 8" (111 mm)B - - - - - - -
C - - - - - - -
+ B2-SW
A - - 2 7 8" (73 mm) - 26 8 51 2" (140 mm)B - - - - - - -
C - - - - - - -
B3-SW
A - - 3 1 8" (79 mm) - 4 8 51 2" (140 mm)B - - - - - - -
C - - - - - - -
B4-SW
A - - 5" (127 mm) - 4 8 51 2" (140 mm)
B - - - - - - -C - - - - - - -
B8-SW
A - - - 4" (102 mm) - 8 5 1 2" (140 mm)B - - - - - - -
C - - - - - - -
+++B1-SEW
A - - 2 7 8" (73 mm) - - 8 5 1 2" (140 mm)
B10-SF
A - 3 1 2" (89 mm) 3 9 32" (83 mm) - - 4 4 3 8" (111 mm)B - 151 64" (46 mm) 13 8" (35 mm) - - - -
For Flow Meter
B20-SFW
A - - - 527 64" (138
mm) - 8 51 2" (140 mm)
B - - - 2 43 64" (68 mm) - - -For Flow Meter
WDE1-S
A - - 4 9 16" (112 mm) 91 2" (241 mm) 90 8 51 2" (140 mm)B - - 4 5 16" (110 mm) 5" (127 mm) - - -
C - - - - - - -
WDE94-S
A - - - 91 2" (241mm) 94 8 5
1 2" (140 mm)
B - - - 5" (127 mm) - - -
C - - - - - - -
Pump Flange Adapters (Waterous Pump Use) ...Continued
Valve Guide
8/9/2019 Valve Guide 2
11/15
Pump Flange Adapters General Use
STYLE SIZE
2" (51 mm) 4" (102 mm) ANGLE BOLT HOLE BOLT CIR. DIA.
## B10-SP
A - 2"(50 mm) - 47 1 16"
(179 mm)
B - - - - -
C - - - - -
+++ DE1-S
A 33 4"
(95 mm)9 1 2"
(241 mm) 90 84 3 8"
(111 mm)
B 413 16"
(122 mm)5"
(127 mm) - - -
C - - - - -
+++ DE2-S
A 33 4"
(95 mm) - 90 84 3 8"
(111 mm)
B 51 2"
(140 mm) - - - -
C - - - - -
Pump Flange Adapters Darley Pump Use
STYLE
SIZE
2 1 2" (64 mm) 3"/3 1 2" (76/89 mm) ANGLE BOLT HOLE BOLT CIR. DIA.
B2-S
A 25 8"
(67 mm)2 7 8"
(73 mm) - 44 19 32"
(117 mm)
B - - - - -
C - - - - -
DD1-S
A 61 4"
(159 mm)5 3 4"
(146 mm) 6 44 19 32"
(117 mm)
B - - - - -
C - - - - -
C
A = Overall lengthB = Length to centerline
of drain holeC = Length to edge
of drain boss
BA
A = Valve flange to centerline of elbowB = Pump flange to
centerline of elbow
Discharge & Intake Adapters Pump Elbow Adapters
Valve Dimension KeyKEY
* 1/ 4" and 3/ 4" NPT taps
** (2)3/ 4" NPT taps
*** 3/ 4" NPT tap
30 Angle
90 Angle
Includes Strainer
+ Eccentric ange face
++ Slotted valve ange
+++ 8 holes ange - Use 4
(3) 3/ 4" NPT Taps
Available in Cast or Chrome
# For spacing only. 4 3/ 8" BCD each end.## For use when replacing a 7840 with an 8840. Each adapter is 1" thick.
### (2)3/ 4" NPT Taps and (1) 1" NPT Tap
B
A
Valve Guide
8/9/2019 Valve Guide 2
12/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
Air ActuatorAir Actuators operate off the apparatus air supply and are equippedwith an emergency override. Designed for full open/close applicationsonly. Units are supplied with two air flow control valves to regulate theopening and closing valve speed to comply with the current NFPA 1901Standard. Available on 4" Swing-Out Valves
Electric Actuator shown mounted ona Swing-Out Valve
Electric ActuatorsElectrically driven worm gear rotates a gear sector for smooth and easy operationwith no switches inside the gear actuator to malfunction. Available on 2" - 4" Valves
Manual Gear ActuatorPosition Indicator (landscape)Available in Landscape orPortrait Orientations
Handwheel ActuatorsHandwheel Actuators are used for smooth, precise operation of valves such as on adeck gun, large diameter side discharge or ladder pipe. Available on 2" - 4" Valves
Rack and Sector
Rack And Sector ActuatorMinimizes troublesome linkage problems associated withremote handles. The Rack and Sector Actuator is usable withmost pumps (depending on pump panel width). Available on 21 2" - 3 1 2" valves.
ACTUATOR OPTIONSManual Actuators
R-1
TS
TSC
SZ
Available in 5" & 8", lengths
for 1" 11
/ 2" valvesAvailable in 5, 7, 91/ 4, & 11lengths for 2 3 1/ 2 valves
Available with 1 or 2 holes for 1 and 1 valves.Available with 1, 2 or 3 holes for 2 3 valvesin various lengths. Contact Akron Brass CustomerService for more details.
Available in 5" & 8", lengthsfor 1" 11/ 2" valvesAvailable in 5, 7, 9 1/ 4, & 11lengths for 2 3 1/ 2 valves
Available in 7" 9 1/ 4" & 103/ 4"lengths for 2" 3 1/ 2" valves
Air Actuator shown withAir Control Valves
Valve Guide
8/9/2019 Valve Guide 2
13/15
Identifying Akron Generation II Swing-out Valves
Valve Repair kits Generation I Only Generation I andGeneration II
Valve Style
Basic ServiceKit # (O-rings
and Seatsonly)
Complete ServiceKit # (O-rings,
Seats, and Ball)
Complete ServiceKit # (O-rings,
Seats, and Ball)
8620/8820 9204 8805* 91458625/8825 9205 8806* 9146
8630/8830 9206 8807* 91478635/8835 9206 8807* 91478810 9208 8803 88038815 9209 8804 88048840 9166 - -8910 9208 - 89038915 9209 - 89048920 9204 - 89058925 9205 - 89068930 9206 - 89078935 9206 - 89078940 - 9165* 89087610 9208 9135* 89037615 9209 9136* 89047620 9204 9137* 89057625 9205 9138* 89067630 9206 9139* 89077635 9206 9139* 89077810 9208 9135* 89037815 9209 9136* 89047820 9204 9137* 89057825 9205 9138* 89067830 9206 9139* 89077835 9206 9139* 89077840 - 9165* 8908
*Will be phased out. Refer to Generation II kits for service.
AdditionalMounting Plate
8600, 8800 & 8900Generation II
Valves have G2 inthe Casting
Generation II Stainless Steel Ballswith Hydromax Technology
are marked with G2
Valve Guide
8/9/2019 Valve Guide 2
14/15
A
n
B
Cm
ny
PH
4
FAX
4
44
www
n
m
Generation II HeavyDuty Swing-Out Valves8600, 8800, & 8900 Series
Akron Brass continues to offer a wide variety of apparatus valves to meet the demands of todays re service. Akrons legendarySwing-Out valve has been further enhanced with three major upgrades:
A single valve body that will accept a variety of actuators*. HydroMax technology: A patent pending ball geometry providing operating and ow
performance never seen before in apparatus valves. All new Fusion CF composite ball: a composite ball with Heavy-Duty performance.
8600 Series Available actuators: SZ, Manual Gear, Electric
and Rack and Sector** Available in 2" thru 3 " sizes 316 Stainless Steel ball with HydroMax technology
8800 Series Available actuators: R1, TS, TSC Available in 1" thru 4" sizes** 316 Stainless Steel ball with HydroMax technology
8900 Series Available actuators: R1, TS, TSC, SZ, Manual
Gear, Electric*** and Rack and Sector* Available in 1" thru 4" sizes** Fusion CF Composite ball with
HydroMax technology
Generation II Heavy Duty Swing-Out Valves Accommodates R1, TS, TSC, SZ, manual gear and electric actuators Single valve body available in 2" thru 3 " sizes Provides exibility and convenience in original installations Drop-in replacement for our current valves 90 handle travel No lubrication or regular maintenance required Simple two seated design (no O-Rings to cut or lose during assembly or maintenance) Wide range of available adapters (reference valve guide for availability) High quality brass body Cast, machined and assembled at our facility in Wooster, Ohio
Slo-Cloz
TSSZ
R1Gear
Electric
*Rack and Sector not available with Generation II Body** 4" valve only available with manual gear, electric or air actuators*** Electric Actuator available on 2"-4" only
Valve Guide
8/9/2019 Valve Guide 2
15/15
Fusion CFBall withHydroMax
StainlessSteelBall with
HydroMax
Introducing the new Fusion CF composite ball
The introduction of HydroMax technology has made it possibleto offer an all new Swing-Out valve ball for use in heavy-dutyapplications. The Fusion CF composite ball is constructed of aproprietary material that offers the following:
Gating performance superiorto competitors stainless steel balls
Low operating torque (25% lower thanstainless steel with HydroMax technology)
Lightweight
What is HydroMax technology?
HydroMax technology is a patent pending ball geometry. This unique geometry is used in all Generation II valvesand was designed specically for the Stainless Steel and new Fusion CF Swing-Out valve balls. With this technology,the valve operating torque is LOWER and the gating ow is HIGHER. In comparison, the stainless steel ball in theGeneration II valve has a 35% lower operating torque than the previous stainless steel ball. In addition, the valve willstay in its gated position with no drift at up to 40% higher ows!
* Gating ow rate is the max ow at which the ball will hold its position and not drift when partially closed.
Gating Flow Rate* Comparison
Stainless Ballwith HydroMax
36%Increase
35%Reduction
52%Reduction
Fusion CF Ballwith HydroMax
A v e r a g e
G a
t i n g
F l o w
Operating Force Comparison
A v e r a g e
O p e r a
t i n g
F o r c e
Old StainlessSteel Ball
Stainless Ballwith HydroMax
Fusion CF Ballwith HydroMax
Old StainlessSteel Ball
Valve Guide