This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
30.01 VACUUM CHUCKS TYPE VRSIn high density aluminium Rugged construction, Sure, Effective
Grid vacuum chuck . Clamping slots . 5 meters seal . 1 ON/OFF system . Succion along longitudinal axe 2 version are available to clamp non magnetic pieces: VRS12AL: grid of 12.5 mm in aluminium VRS25AL: grid of 25 mm in aluminium Flatness 0.02/100 mm Parallelism 0.02/100 mm
OPTIONS :Other dimensionsSuccion along transversal axeSeveral independant area of clampingSpecial machiningMachining for palettizing machinesEnd stopsWith base plate in steel to clamp on magnetic chuck
All right reserved to change construction and dimensions without notice - Print date :
Vacuum table grid for Milling . Clamping slot . 10 meters of seal 2 ranges of plates available for clamping non-magnetic parts: VRS-R12AL: grid 12.5 mm Aluminum VRS-R25AL: grid 25 mm AluminiumFlatness 0.02/100 mm mm Parallelism 0.02/100 mm mm
30.02 ROUND GRID VACUUM WORKHOLDING TYPE VRFIn high density aluminium Rugged construction, Innovative, Sure, Effective
Applications
Grinding , Control , Turning
Construction
Concentric grooves . Machining for clamping (according to specification) . 5 meters seal . 1 ON/OFF system . Center succion 2 version are available to clamp non magnetic pieces: VRFC10AL: grid of 10 mm in aluminium VRFC12AL: grid of 12.5 mm in aluminiumFlatness 0.02/100 mm Parallelism 0.02/100 mm
Porrous metal vacuum chuck . Clamping slots . 1 ON/OFF system . Succion along transversal axe Suitable to clamp very small pieces to not deform this pieces.Flatness 0.02/100 mm Parallelism 0.02/100 mm
OPTIONS :Other dimensionsSuccion along longitudinal axeSeveral independant area of clampingSpecial machiningMachining for palettizing machinesEnd stopsWith base plate in steel to clamp on magnetic chuck
All right reserved to change construction and dimensions without notice - Print date :
OPTIONS :Other dimensionsSuccion along longitudinal axeSeveral independant area of clampingSpecial machiningMachining for palettizing machinesEnd stopsWith base plate in steel to clamp on magnetic chuck
All right reserved to change construction and dimensions without notice - Print date :
OPTIONS :Other dimensionsSuccion along longitudinal axeSeveral independant area of clampingSpecial machiningMachining for palettizing machinesEnd stopsWith base plate in steel to clamp on magnetic chuck
Liquid separator : When machining under liquid, obligatory system to protect the vacuum pump.Delivered with automatic stop(version O) or without. Enter / Exit : 3/4¨
30.10 Vacuum unit with vacuum regulation type VALWith ON/OFF switch Rugged construction, Longer life, Sure, Effective
Applications
Grinding , Milling , Machining , Planning
Construction
oil-lubricated rotary vane pumps . Starting box (to CE standards) . Vacuum switch-manually adjustable vacuum threshold value . Vacuum gauge . Air filter and strainer Air ballasting and non-return valve . Capacities from 17 m³ to 150 m³ . Vacuum storagetank (70 liters) to compensate for possible leakage The pump will start only when the vacuum threshold value is at the minimum position (this minimum value depends on the clamping force needed for your machining).Voltage 400 VAC
Art.-N°30.10 Diagram below: dimensions in mm
Product Weight A B C D E F30.10.17.400 70 650 705 725 785 17 m3/h 0.55kw30.10.30.400 75 650 705 725 785 30 m3/h 0.75kw30.10.47.400 80 650 705 725 785 47 m3/h 1.1kw
OPTIONS :. Safety appliance ref 30.10.VS : Allows to check the vacuumthreshold value within the circuit, inorder to initiate either the machining cycle or the emergency stop. Liquid separator ref 30.10.VF : Recommended to avoidliquid being sucked into the pump when machining with coolant spray. Supplied without or with valve which stopssuction.
All right reserved to change construction and dimensions without notice - Print date :
30.10 Vacuum unit with vacuum regulation type VALWith ON/OFF switch Rugged construction, Longer life, Sure, Effective
Applications
Grinding , Milling , Machining , Planning
Construction
oil-lubricated rotary vane pumps . Starting box (to CE standards) . Vacuum switchmanually adjustable vacuum threshold value . Vacuum gauge . Air filter and strainer Air ballasting and non-return valve . Capacities from 100 m³ to 300 m³ . Vacuum storage tank (300 & 500 liters) to compensate for possible leakage The pump will start only when the vacuum threshold value is at the minimum position (this minimum value depends on the clamping force needed for your machining).Voltage 400 VAC
Art.-N°30.10 Diagram below: dimensions in mm
Product Weight A B C D E F G H30.10.100.400 210 1880 630 1135 995 300 1¨ 100 m3/h 2,2 kW30.10.150.400 260 2150 770 1300 1200 360 2¨ 150 m3/h 3 kW30.10.200.400 280 2150 770 1300 1200 360 2¨ 200 m3/h 4 kW30.10.300.400 370 2150 755 1360 1200 360 2¨ 300 m3/h 5,5kW
All right reserved to change construction and dimensions without notice - Print date :
30.20 VACUUM PUMP HIGH QUALITY TYPE VPUniversal Longer life, Rugged & compact construction
Applications
Machining , Clamping
Construction
. oil-lubricated rotary vane pumps . Air filter and strainer . Air ballasting . Capacity from 17 m³ to 500 m³ . motor IP 55 - insulation ¨F¨Voltage 400 VAC Duty cycle 100 %
30.30 Vacuum pump with liquid ringUniversal Innovative, Sure, No mechanical wear from abrasion
Applications
Machining , Clamping
Construction
Vacuum pump with liquid ring IP55 . for application under liquid . integrated liquid separator . refresh by air . work without oil and without contact . must always turn . Starting box (to CE standards) . Vacuum gauge . Air filter and strainerVoltage 400 VAC Duty cycle 100 %