Vacon NXL_The_easy_and_impressive_AC_drive.ppt

19.04.23 1

Vacon NXL –The Easy and Impressive AC drive

Author

19.04.23 2

Vacon NXL – Perfect choice for motors up to 30kW

The NXL is the trouble-free choice for all open loop applications– The standard unit fulfills the EMC requiremens of both industrial, public

and residential environments– The same unit is suitable for all open loop applications (conveyors,

mixers, fans, pumps, packaging machines, etc.)– No additional cabinet is required, protection classes IP21 and IP54– The instructions to install, connect and program the drive, are

integrated to each unit– High starting torque and dynamics is guaranteed, thanks to

sophisticated open loop vector control and effective design– The motor noise is extremely low because of high switching frequency

(up to 16 kHz, 6 kHz as standard without derating) and close to sinusoidal current

– The standard control I/O can be extended with more inputs and outputs. All typical fieldbus controls are possible by adding the fieldbus boards. The RS485 (Modbus) is integrated as standard.

Author

19.04.23 3

Compet A

Compet A

5.5kW/400V 15kW/400V 30kW/400V

IP54

IP21

Vacon NXL – Everything integrated in compact dimensions

Most compact AC drive on the market:

- Especially IP54

- Integrated RFI filters

- Integrated AC chokes

Author

19.04.23 4

Vacon NXL – Everything integrated in compact dimensions

380-500V, IP21 and IP54, EMC-level H (or T or C)

Author

19.04.23 5

Temperature controlled cooling fan, easy replacement

Cooling channel isolated from electronics

Robust structure

Integrated EMC filter as standard for both industrial and public networks

Integrated AC choke as standard

Modular design to fulfill all EMC regulations (Faraday cage)

High voltage separated from control unit

Removable display panel

Standard control I/O

Option boards

Power terminals

Vacon NXL – Everything integrated in compact dimensions

Integrated brake chopper as standard

Author

19.04.23 6

nxlk57

Power module

Motor

uvw

Mains

L1L2L3

PE

Control module

Control Keypad

Integrated input module (AC-choke and RFI-filter)

Brake resistor (external option)

IGBT InverterCurrent Sensors

3~

Motor and Application

Control

Option Board Control I/O

Fan

Rectifier

Charging

3~

Brake chopper

Motor ControlµP

Measurements

Gate drivers

Power supply

Option Board

The integrated AC choke protects effectively the sensitive semiconductors and reduces drastically the level of harmonical currents.

Vacon NXL – Everything integrated in compact dimensions

Author

19.04.23 7

Vacon NXL – Versatile controls

Standard I/O

Fieldbus boards

I/O expander boards

Author

19.04.23 8

Vacon NXL – Versatile controls

Author

19.04.23 9

Vacon NXL – Option boards

Author

19.04.23 10

Vacon NXL – First-class usability

The instructions for installation, connection and commissioning are attached to each unit.

Author

19.04.23 11

Vacon NXL – Typical programming: 4 steps onlyThe Start-up Wizard can be activated by pressing the ’Stop’ button for 5 seconds when the NXL is in stop state.

Author

19.04.23 12

Vacon NXL – Typical programming: 4 steps only

1 Activate the Start-up Wizard

2 Select the Mode

3 Tune the motor nominal speed

4 Tune the motor nominal current

These settings are made automatically if the FAN mode is selected

Author

19.04.23 13

Vacon NXL – Advanced programming

A large number of parameters can be programmed with the keypad or the NCdrive PC tool

Author

19.04.23 14

Vacon NXL – Software

The standard Multi-Control Application includes a large number of possibilities, e.g.:– All control inputs and outputs are programmable– PID controller– PFC for up to four parallel pumps– Flying start– Complete protections– Motor auto-identification– Output relay delays

The PLC possibilities are integrated in the Vacon NXL. It is often possible to remove the PLC and integrate the functions in the NXL software with the Vacon NC1131-3 Engineering tool.Following ready-made special applications are available free of charge:

– Brake control– Lift– Multi-Motor– Sliding Door– Local/Remote– Fire mode– Multi-purpose (June 2006)

Author

19.04.23 15

Vacon NXL – Compact frames MF2 and MF3

The Vacon NXL range also offers compact, cabinet mounted units for motor powers up to 2.2 kW. Both the 208-230V and 380-500V ranges are available.The micro-frame sizes, MF2 and MF3, are the best choice when the dynamic drive with a plenty of features have to be installed in a limited space:

– Small size– Flexible installation (back or side, screw of DIN rail)– Easy to install and use– Low noise– Large amount of control possibilities (via I/Os, or fieldbuses or display panel)– Large amount of features (e.g. fully programmable I/O, auto-identification, PID

controller, flying start)– High performance– RFI filters and AC chokes available as option

Author

19.04.23 16

Vacon NXL – Compact frames MF2 and MF3

208-230V range, IP20, EMC level N

(no RFI filters, EMC-level H with RFI-filter option)

380-500V range, IP20, EMC level N

(no RFI filters, EMC-level H with RFI-filter option)

Author

19.04.23 17

Vacon NXL – Typical options

Author

19.04.23 18

Vacon NXL – Type designation code (MF4-MF6)

Author

19.04.23 19

Vacon NXL – EMC

The Vacon NXL includes the RFI filters for both industrial and residential networks as standard. No additional RFI filters or cabinets are needed.The EMC-level T can be modified from H-level units.The EMC-level C is available as integrated option

EMC-level H: EN61800-3 (2004),category C2; EN55011 class A

EMC-level C: EN61800-3 (2004),category C1; EN55011 class B

Author

19.04.23 20

Heathrow Airport Terminal T5, UK– Hundreds of NX drives– EMC level C– Ethernet– HVAC

Hotel Golf, Slovenia– 30 Vacon drives– IP54– LonWorks– HVAC

BBC Broadcasting House, UK

– Hundreds of NX drives– EMC level C– HVAC

Valio creameries, Finland– Locations: Jyväskylä, Lapinlahti,

Riihimäki– Hundreds of NX drives– Profibus– Conveyors, packing

Vacon NXL – Typical applications

Author

19.04.23 21