V230 PRESSIONE - Pressione di esercizio: ________________________ da 1.5 a 6 bar - Resistenza statica alla pressione: _____________________ 22 bar PORTATA - Portata di esercizio (Delta P = 1 bar): ________________ 10 mc/h - Portata di lavaggio in controcorrente: ___________max 4 mc/h - Portata del lavaggio lento: ________________ da 100 a 600 lt/h - Portata lavaggio veloce in equicorrente: ______ max 5,5 mc/h QUANTITATIVO MAX DI RESINA RIGERERABILE: __________ 300 lt TEMPERATURA DI ESERCIZIO: ____________________ da 5 a 40° C MATERIALE CORPO VALVOLA: _______________________ ABS + FV RIGENERAZIONE IN EQUI-CORRENTE - Cicli regolabili: _________________________ a seconda del timer - Durata Massima disponibile: ___________ a seconda del timer POTENZA ELETTRICA _______________________________ vedi timer CICLI DELLA RIGENERAZIONE - 1) Controlavaggio _________________________ contro-corrente - 2) Aspirazione _______________________________ equi-corrente - 3) Lavaggio Lento __________________________ equi-corrente - 4) Lavaggio Rapido + Salamoia _____________ equi-corrente - 5) Servizio______________________________________ equi-corrente DIMENSIONI - Attacco Bombola: ___________________________________4" 8UN - Tubo distributore: _________________________________ Ø 50 mm - Conduttura allo scarico: __________ Ø 20 mm o 1" fil. maschio - Conduttura alla salamoia: ____________________________ 3/8” RACCORDI INGRESSO/USITA DISPONIBILI - raccordo pvc 2”x1”¼ femmina/femmina - raccordo pvc 2”x ISO d. 40 femmina/femmina incollaggio - raccordo ottone 2”x1” ½ femmina/maschio -ACCESSORI/OPZIONI - Vavola filtro - Valvola per impianti di Demineralizzazione - Valvola Salamoia - By-Pass - Produttore di cloro originale (solo abbinato con Timer ACL) - No By-Pass Acqua grezza (a seconda del timer e con valvola idropneumatica) CERTIFICATI - Conformità al DM 174 del 06/04/2004 - 2002/95/EC (RoHS) V230 PRESSURE - Operating Pressure: _______________________ from 1.5 to 6 bar - Static resistance to pressure: _________________________ 22 bar FLOW RATE - Service Flow rate (1 bar drop): ______________________ 10 mc/h - Backwash: _____________________________________max 4 mc/h - Slow rinse: ______________________________ from 100 to 600 lt/h - Fast rinse: ____________________________________ max 5,5 mc/h MAXIMUM QUANTITY OF REGENERATIVE RESIN: _________ 300 lt OPERATING TEMPERATURE: ___________________ from 5 to 40° C VALVE MATERIAL: __________________________________ ABS + FV DOWNFLOW REGENERATION - Adjustable cycles: _____________________ depend on the timer - Time available: _______________________ depend on the timer ELECTRICAL RATE __________________________________ see timers REGENERATION CYCLE - 1) Backwash _______________________________________ Upflow - 2) Brine _________________________________________ Downflow - 3) Slow Rinse _____________________________________ Downflow - 4) Rapid Rinse + Brine Refill _______________________ Downflow - 5) Servizice______________________________________ Downflow DIMENSIONS - Mounting base: _____________________________________ 4" 8UN - Distributor pilot: ___________________________________ Ø 50 mm - Drain line: _____________________Ø 20 mm or 1" threaded male - Brine line: _____________________________________________ 3/8” PIPING FITTING IN/OUT AVAILABLE (BAYONET) - pvc fitting 2”x1”¼ female/female - pvc fiting 2”x ISO d. 40 female/female glue - brass fitting 2”x1” ½ female/male ACCESSORIES/OPTIONS - Filter Valve - Demineralization Valve - Brine Valve - By-Pass - chlorine generator (sonly ACL Timer) - No By-Pass raw water (depend on the timer and with idropneumatic valve) CERTIFICATES - DM 174 DD April 06, 2004 compliance - 2002/95/EC (RoHS) V230 Siata 219
13
Embed
V230 - ..:: Welcom To Hy-Techhytechaquade.com/Pdf/SIATA VALVES/Valves/V-230/V230.pdf · b) simplex or duplex demineralisation and dealkalisation systems for laboratory and industrial
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
V230
PRESSIONE- Pressione di esercizio: ________________________ da 1.5 a 6 bar - Resistenza statica alla pressione: _____________________ 22 bar PORTATA- Portata di esercizio (Delta P = 1 bar): ________________ 10 mc/h - Portata di lavaggio in controcorrente: ___________max 4 mc/h - Portata del lavaggio lento: ________________ da 100 a 600 lt/h- Portata lavaggio veloce in equicorrente: ______ max 5,5 mc/hQUANTITATIVO MAX DI RESINA RIGERERABILE: __________ 300 lt TEMPERATURA DI ESERCIZIO: ____________________ da 5 a 40° C MATERIALE CORPO VALVOLA: _______________________ ABS + FV RIGENERAZIONE IN EQUI-CORRENTE- Cicli regolabili: _________________________ a seconda del timer- Durata Massima disponibile: ___________ a seconda del timerPOTENZA ELETTRICA _______________________________ vedi timerCICLI DELLA RIGENERAZIONE- 1) Controlavaggio _________________________ contro-corrente- 2) Aspirazione _______________________________ equi-corrente- 3) Lavaggio Lento __________________________ equi-corrente- 4) Lavaggio Rapido + Salamoia _____________ equi-corrente- 5) Servizio______________________________________ equi-correnteDIMENSIONI- Attacco Bombola: ___________________________________4" 8UN- Tubo distributore: _________________________________ Ø 50 mm- Conduttura allo scarico: __________ Ø 20 mm o 1" fil. maschio- Conduttura alla salamoia: ____________________________ 3/8”RACCORDI INGRESSO/USITA DISPONIBILI - raccordo pvc 2”x1”¼ femmina/femmina - raccordo pvc 2”x ISO d. 40 femmina/femmina incollaggio - raccordo ottone 2”x1” ½ femmina/maschio-ACCESSORI/OPZIONI- Vavola filtro- Valvola per impianti di Demineralizzazione- Valvola Salamoia- By-Pass- Produttore di cloro originale (solo abbinato con Timer ACL)- No By-Pass Acqua grezza (a seconda del timer e con valvola idropneumatica)CERTIFICATI- Conformità al DM 174 del 06/04/2004- 2002/95/EC (RoHS)
V230
PRESSURE- Operating Pressure: _______________________ from 1.5 to 6 bar - Static resistance to pressure: _________________________ 22 bar FLOW RATE- Service Flow rate (1 bar drop): ______________________ 10 mc/h - Backwash: _____________________________________max 4 mc/h - Slow rinse: ______________________________ from 100 to 600 lt/h- Fast rinse: ____________________________________ max 5,5 mc/hMAXIMUM QUANTITY OF REGENERATIVE RESIN: _________ 300 lt OPERATING TEMPERATURE: ___________________ from 5 to 40° C VALVE MATERIAL: __________________________________ ABS + FV DOWNFLOW REGENERATION- Adjustable cycles: _____________________ depend on the timer- Time available: _______________________ depend on the timerELECTRICAL RATE __________________________________ see timersREGENERATION CYCLE- 1) Backwash _______________________________________ Upflow- 2) Brine _________________________________________ Downflow- 3) Slow Rinse _____________________________________ Downflow- 4) Rapid Rinse + Brine Refill _______________________ Downflow- 5) Servizice______________________________________ DownflowDIMENSIONS- Mounting base: _____________________________________ 4" 8UN - Distributor pilot: ___________________________________ Ø 50 mm- Drain line: _____________________Ø 20 mm or 1" threaded male - Brine line: _____________________________________________ 3/8”PIPING FITTING IN/OUT AVAILABLE (BAYONET)- pvc fitting 2”x1”¼ female/female - pvc fiting 2”x ISO d. 40 female/female glue - brass fitting 2”x1” ½ female/maleACCESSORIES/OPTIONS- Filter Valve- Demineralization Valve- Brine Valve- By-Pass- chlorine generator (sonly ACL Timer)- No By-Pass raw water (depend on the timer and with idropneumatic valve)CERTIFICATES- DM 174 DD April 06, 2004 compliance- 2002/95/EC (RoHS)
CARATTERISTICHE GENERALILe valvole V230 costituiscono l'elemento essenziale per la realizzazione di impianti di vario tipo ed utilizzo:a) addolcimento (decalcificazione) singolo o duplex o più colonne, ad uso domestico, da laboratorio e industriale.b ) d e m i n e r a l i z z a z i o n e e decarbonatazione, singolo o duplex , per usi di laboratorio e industriale, e per tutti gli impieghi ove si renda necessaria di un tipo d’acqua con caratteristiche di qualità garantita.c) filtrazione singola o duplex per tutte le applicazioni precedenti.Le valvole sono costruite con materiali che garantiscono la massima resistenza e qualità. le valvole dispongono di una vasta gamma di timer, per il controllo di tutte le fasi operative di servizio e di rigenerazione, partendo dal più semplice timer elettromeccanico con orologio settimanale, ai sofisticati timer elettronici, nei vari modelli, che consentono controlli volumetrici, volumetrici/tempo, controllo di salinità in microsiemens/cm etc.Nei sistemi elettronici tutti i tempi di intervento, delle fasi operative, sono programmabili in relazione al tipo e dimensione dell ' impianto. per le caratteristiche specifiche dei timer vedere la sezione timer.SCHEMI VARIANTI ADDOLCIMENTO- A) Schema addolcimento duplex con due valvole di misura salamoia, lavaggio lento, valvola di uscita 3v. timer piloti:
- B) Schema addolcimento duplex con valvola di misura salamoia, lavaggio lento e dispositivo automatico/dinamico, per la selezione della linea in aspirazione. timer piloti. valvola 3v:
- C) Schema addolcimento duplex senza lavaggio lento (contenitore sale/salamoia alimentato separatamente) senza valvola di misura salamoia. timer 5 piloti. valvola 3v:
- E) Schema addolcimento duplex con lavaggio lento (contenitore sale/salamoia alimentato separatamente), senza valvola di misura salamoia. Timer 7 piloti.Valvola 3V
- F) Schema addolcimento Duplex senza lavaggio lento (contenitore sale/salamoia alimentato separatamente), due valvole di uscita “a” e “b”. Timer 5 piloti. Senza valvola di misura salamoia:
- G) Schema addolcimento duplex con lavaggio lento (contenitore sale/salamoia alimentato separatamente), due valvole di uscita “a” e “b”. Timer 7 piloti. Senza valvola di misura salamoia:
- H) Schema demineralizzazione senza valvole per lavaggio lento, timer 5 pilot:
- I) Schema demineralizzazione con valvole per lavaggio lento, timer 7 piloti:
Sporgenza max 3 mm S m u s s a r e l ' imbocco del tubo max 1 mm
V230 Siata
221
SERVICE MANUAL
GENERAL FEATURESV230 valves are the essential elements in bui ld ing the fo l lowing systems:a) simplex, duplex or multi-tank softening (decalcification) systems for domestic, laboratory and industrial use;b) simplex or duplex demineralisation and dealkalisation systems for laboratory and industrial use and all other uses requiring water with characteristics of guaranteed quality;c) simplex or duplex filtering systems for al l of the previous applications.The valves are made with materials that guarantee utmost resistance and quality. They are available with a vast range of controllers for every operation phase of service and regeneration, starting from the simplest electronic basic controller with weekly clock to the sophisticated electronic controllers in various models which enable volume, volume-time cont ro l and sa l in i ty cont ro l in MicroSiemens/cm, etc.In the electronic systems, all the intervention times of operation phases can be programmed in relation to system type and dimension.For specific controller features, see the relative controller section.SOFTENING VERS IONS SCHEMES- A) Duplex softening scheme with two brine measure valves, slow rinse, 3V output valve. 5 pilot valve controller:
- B) Duplex softening scheme with brine measure valve, s low r inse and automatic/dynamic device to determine brine-draw line. 5 pilot valve controller. 3V valve:
- C) Duplex softening scheme without slow rinse, (salt-brine container fed separately), without brine-measure valve. 5 pilot valve controller. 3V valve:
- E) Duplex softening scheme with slow rinse (Salt/brine container fed separately) without brine-measure valve. 7 pilot valvecontroller. 3V valve:
Duplex softening connections referring to schemes “E”.
Duplex softening connections referring to schemes “G”.
Deionisation connections referring to schemes “H”.
Deionization connections referring to schemes “I” .
PROJECTION TUBE PILOT
- F) Duplex softening scheme without slow rinse (Salt/brine container fed separately) Two output valves "A" and "B". 5 pilot valve controller. Without brine measure valve:
- G) Duplex softening scheme with slow rinse (Salt/brine container fed separately) Two output valves "A" and "B". 7 pilot valve controller. Without brine measure valve:
- H) Demineralisation scheme without valves for slow rinse, 5 pilot valve cont ro l le r.At tent ion ! D i s suaded application:
- I) Demineralisation scheme with valves f o r s l o w r i n s e , 7 p i l o t v a l v e control ler.Attent ion! Appl icat ion Recommended:
Duplex softening connections referring to schemes “A”, “B”, “C” .
Addolcitore o filtro singolo con timer 2 piloti. Valvole utilizzabili: V230E, V230E-T. By-pass Acqua dura durante la rigenerazione nella 1^, 2^ e 3^ fase. Controllo salamoia tramite valvola PS0620.(Single softening or filtration system with timer 2 pilots. Usable valves: V230E, V230E-T. By-pass hard water during the regeneration in 1st, 2nd and 3rd cicle. Brine control by PS0620).
Addolcitore o filtro singolo con timer 3 piloti. Valvole utilizzabili: V230E, V230E-T. NO By-pass Acqua dura durante la rigenerazione tramite valvola idropneumatica. Controllo salamoia tramite valvola PS0620.(Single softening or filtration system with timer 3 pilots. Usable valves: V230E, V230E-T. NO By-pass hard water during the regeneration with idropneumatic valve). Brine control by PS0620.
1
2 6
4
5
32
1
3
4
IN
OUT
5 6
Addolcitore singolo con timer 3 piloti con controllo aspirazione. Valvole utilizzabili: V230E, V230E-T. By-pass Acqua dura durante la rigenerazione nella 1^, 2^ e 3^ fase. (Single softening system with timer 3 pilots with apiration control. Usable valves: V230E, V230E-T. By-pass hard water during the regeneration in 1st, 2nd and 3rd cicle).
1
2 6
4
5
32
1
3
4
IN
OUT6
ww
w.h
yte
kin
tl.c
om
info
@h
yte
kin
tl.c
om
65
ww
w.h
yte
kin
tl.c
om
info
@h
yte
kin
tl.c
om
tino salamoia(Brine tank)
Addolcitore singolo con timer 4 piloti con controllo aspirazione e chiusura utilizzo. Valvole utilizzabili: V230E, V230E-T. NO By-pass Acqua dura durante la rigenerazione tramite valvola idropneumatica. (Single softening system with timer 4 pilots with apiration control and use cloruse. Usable valves: V230E, V230E-T. NO By-pass hard water during the regeneration with idropneumatic valve).
21
3
4
IN
OUT
7 8
1
2
4
3
6
5
8
7
ww
w.h
yte
kin
tl.c
om
6
5
ww
w.h
yte
kin
tl.c
om
6
5
Tino salamoia(Brine tank)
Addolcitore duplex alternato con timer 5 piloti. Valvole utilizzabili: V230E, V230E-T. NO By-pass Acqua dura durante la rigenerazione tramite valvola idropneumatica. Controllo salamoia tramite valvola PS0620. (Alternate Duplex softening system with timer 5 pilots. Usable valves: V230E, V230E-T. NO By-pass hard water during the regeneration with idropneumatic valve. Brine control by PS0620).
2
1
3
4
IN
OUT
9 106
5
7
8
OUT
10 9
Addolcitore duplex alternato con timer 7 piloti. Valvole utilizzabili: V230E, V230E-T. NO By-pass Acqua dura durante la rigenerazione tramite valvola idropneumatica. Controllo aspirazione salamoia treamite valvola idropneumatica. (Alternate Duplex softening system with timer 7 pilots. Usable valves: V230E, V230E-T. NO By-pass hard water during the regeneration with idropneumatic valve. Brine line control by idropneumatic valve).
1
2
4
3
6
5
8
7 9
10
11
12
137
8 14
1
2
4
3
6
5
8
7 9
10
7
8
2
1
3
4
IN
OUT
13 148
7
9
10
OUT
14 13
6
5
tino salamoia(Brine tank)
12
11
tino salamoia(Brine tank)
1 2
3 4
5
6
V230 Siata
229
ww
w.h
yte
kin
tl.c
om
in
fo@
hy
tek
intl
.co
m
Demineralizzatore con timer 5 piloti. Valvola utilizzabile: V230D/05. NO By-pass Acqua grezza durante la rigenerazione tramite valvola idropneumatica. Aspirazione rigeneranti tramite PS1314 e PS 1315. (Demineralization system with timer 5 pilots. Usable valve: V230D/05. NO By-pass raw water during the regeneration with idropneumatic valve. Rigenerant suction by PS1314 e PS1315).
1
2
4
3
6
5
8
7 9
10
7
8
IN
8
7
9
10
OUT
1 2
4
3
5
6
5
ww
w.h
yte
kin
tl.c
om
in
fo@
hy
tek
intl
.co
m
5
ww
w.h
yte
kin
tl.c
om
in
fo@
hy
tek
intl
.co
m
HCl
NaOH
7
Demineralizzatore con timer 7 piloti. Valvola utilizzabile: V230D/05. NO By-pass Acqua grezza durante la rigenerazione tramite valvola idropneumatica. Aspirazione rigeneranti tramite valvole idropneumatiche. (Demineralization system with timer 7 pilots. Usable valve: V230D/05. NO By-pass raw water during the regeneration with idropneumatic valve. Rigenerant suction by idropneumaic valves).
1
2
4
3
6
5
8
7 9
10
11
12
137
8 14 10
9
11
12
OUT
1 2
4
3
5
6
IN
5
NaOH
ww
w.h
yte
kin
tl.c
om
in
fo@
hy
tek
intl
.co
mw
ww
.hy
tek
intl
.co
m
info
@h
yte
kin
tl.c
om
HCl
8
7
14
13
8
Demineralizzatore 3 colonne con timer 7 piloti. Valvola utilizzabile: V230D/05. NO By-pass Acqua grezza durante la rigenerazione tramite valvola idropneumatica. Aspirazione rigeneranti tramite valvole di non ritorno PS1314 e PS1315. (Demineralization system 3 step with timer 7 pilots. Usable valve: V230D/05. NO By-pass raw water during the regeneration with idropneumatic valve. Rigenerant suction by anti-backflow valve PS1314 and PS1315).
1
2
4
3
6
5
8
7 9
10
11
12
137
8 14
10
9
11
12
OUT
13 14
65
7
8
5
NaOH
2
1
3
4
IN
5
HCl
NaOH
ww
w.h
yte
kin
tl.c
om
in
fo@
hy
tek
intl
.co
mw
ww
.hy
tek
intl
.co
m
ww
w.h
yte
kin
tl.c
om
C ationica forte
A
nionica debole
Anionica forte
(Strong cationic)
(Weak Anionic)
(Strong Anionic)
9
V230Siata
230
Filtro duplex rigenerazione in cascata con timer 5 piloti. Valvola utilizzabile: V230E (con eiettore per filtro). NO By-pass Acqua grezza durante la rigenerazione tramite valvola idropneumatica. (Series Duplex Filter system with timer 5 pilots. Usable valve: V230E (with injector for filter). NO By-pass raw water during the regeneration with idropneumatic valve).
1
2
4
3
6
5
8
7 9
10
7
86
5
7
8
OUT
9 10
2
1
3
4
IN
5
Sabbia (Sand)
Carbone Carbon
10
Addolcitore Duplex alternato con timer 5 piloti. Valvole utilizzabili: V230E, V230E-T. NO By-pass Acqua grezza durante la rigenerazione tramite valvola 3 vie. Controllo salamoia tramite valvola PS0620. (Alternate Duplex softening system with timer 5 pilots. Usable valves: V230E, V230E-T. NO By-pass hard water during the regeneration with 3 way valve. Brine control by PS0620).