A wide range of DeVilbiss extensions are available for those difficult to reach applications. finishingbrands.eu DEVILBISS SPRAY GUN EXTENSIONS The DeVilbiss extension range is manufactured from brass with stainless steel needles as standard, they are available for Advance HD manual and Cobra 2 automatic pressure spray guns. When ordering ensure the part number for the model is completed with the required length in inches. Other lengths and flexible extensions are available upon request. Fan adjuster (spray guns not included) C 360 degree circular spray For medium to heavy viscosity materials. With adjustable spray gap. 0.062” tip supplied as standard. (0.093” tip available) SC 360 degree circular spray For low to medium viscosity materials. With adjustable spray gap. SA forward round spray EA forward fan spray EAX forward fan spray EXTADV-C-XX XX = add length needed in inches to complete part number. EXTADV-SC-XX XX = add length needed in inches to complete part number. EXTADV-SA-XX XX = add length needed in inches to complete part number. EXTADV-EA-XX XX = add length needed in inches to complete part number. EXTADV-EAX-XX XX = add length needed in inches to complete part number. EXTCB2-C-XX XX = add length needed in inches to complete part number. EXTCB2-SC-XX XX = add length needed in inches to complete part number. EXTCB2-SA-XX XX = add length needed in inches to complete part number. EXTCB2-EA-XX XX = add length needed in inches to complete part number. EXTCB2-EAX-XX XX = add length needed in inches to complete part number. 3 /4” (19mm) 3 /8” (9.5mm) 7 /16” (11mm) 1 3 /4” (44mm) 7 /8” (22mm) Hardened nozzle versions are available (type CVT and type HCVT) for Ceramic/Abrasive paints SC-MBX version also available with very fine quality spray (gap not adjustable) For low to medium viscosity materials. Supplied with 0.078" (1.98 mm) fluid tip. Supplied with 66BSSx63PB set up. Fluid tip 0.046" (1.17 mm). Supplied with J2SS x AA1 fan spray set up. Fluid tip 0.043" (1.09 mm). 46-1042 round spray cap (optional). EXTENSION Type of spray To fit Advance HD part number To fit Cobra 2 part number Clearance diameter Comments spray tips mb air systems ltd
2
Embed
V UDLPE DEVILBISS SPRAY GUN EXTENSIONS … · Bare Spray gun’s exclude needle, air cap, fluid tip and retaining ring. – Advance conventional gun ADV-P000-00 – Cobra 2 conventional
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
A wide range of DeVilbiss extensions are available for those difficultto reach applications.
finishingbrands.eu
DEVILBISS SPRAY GUN EXTENSIONS
The DeVilbiss extension range ismanufactured from brass with stainlesssteel needles as standard, they are
available for Advance HD manual andCobra 2 automatic pressure spray guns.When ordering ensure the part number for
the model is completed with the requiredlength in inches. Other lengths and flexibleextensions are available upon request.
Fan adjuster
(spray guns not included)
C360 degree circular spray
For medium to heavyviscosity materials. Withadjustable spray gap.0.062” tip supplied as
standard.(0.093” tip available)
SC360 degree circular spray
For low to mediumviscosity materials. Withadjustable spray gap.
SAforward round spray
EAforward fan spray
EAXforward fan spray
EXTADV-C-XXXX = add length needed in inches to complete
part number.
EXTADV-SC-XXXX = add length needed in inches to complete
part number.
EXTADV-SA-XXXX = add length needed in inches to complete
part number.
EXTADV-EA-XXXX = add length needed in inches to complete
part number.
EXTADV-EAX-XXXX = add length needed in inches to complete
part number.
EXTCB2-C-XXXX = add length needed in inches to complete
part number.
EXTCB2-SC-XXXX = add length needed in inches to complete
part number.
EXTCB2-SA-XXXX = add length needed in inches to complete
part number.
EXTCB2-EA-XXXX = add length needed in inches to complete
part number.
EXTCB2-EAX-XXXX = add length needed in inches to complete
part number.
3/4” (19mm)
3/8” (9.5mm)
7/16” (11mm)
13/4” (44mm)
7/8” (22mm)
Hardened nozzle versions are available
(type CVT and type HCVT) for Ceramic/Abrasive
paints
SC-MBX version alsoavailable with very finequality spray (gap not
adjustable)
For low to mediumviscosity materials.Supplied with 0.078" (1.98 mm) fluid tip.
Supplied with66BSSx63PBset up. Fluid tip
0.046"(1.17 mm).
Supplied with J2SS x AA1fan spray set up. Fluid tip
0.043" (1.09 mm).
46-1042 round spray cap (optional).
EXTENSION Type of spray To fit Advance HD part number
To fit Cobra 2 part number Clearance diameter Comments