This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Find us at www.keysight.com Page 1
UXM LTE/LTE-A Pro Application Feature Comparison
For more information on the options, part numbers, configuring your UXM instrument,
upgrades, and licenses, view the Keysight UXM Wireless Test Set Configuration Guide,
5991-4078EN. Note: The latest MEU license is available via the E7535A-MEU Minor
Enhancement Update and applies to all formats installed on the test set.
1. May require more than one TRX set and/or more than one UXM (connected in an array). See the Keysight UXM Wireless Test Set Configuration Guide, li terature number 5991-4078EN.
2. First available in the E7530A at 1.5.1.0. 3. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,
literature number 5991-4078EN. 4. VoLTE calls require Keysight E6966B IMS-SIP server and/or client. 5. Requires E7515A-506 for component carriers in unlicensed spectrum, and carrier aggregation option(s) for the
desired number of carriers. Also, LAA requires both FDD and TDD base options and FDD and TDD carrier aggregation options (as the PCC for LAA must be FDD, but the SCC are in a TDD band).
1. First available in the E7530A at 1.5.1.0. 2. May require more than one TRX set and/or more than one UXM (connected in an array ). See the Keysight UXM
Wireless Test Set Configuration Guide, literature number 5991 -4078EN. 3. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,
literature number 5991-4078EN. 4. To aggregate any number of mixed FDD and TDD carriers, you must have both an FDD and TDD license for the
desired number of carriers. For example, to mix any FDD/TDD combination of three component carriers, you must have both a 3CC DL CA (FDD) and a 3CC DL CA (TDD) license.
LTE Detailed Network Behavior E7530A
Test Application E7630A A.01 E7630A A.02 E7630A A.03 E7630A A.04
First Available
in Revision
Page/Release Yes Yes Yes Yes Yes 1.2.1.0
Cat 0 (also known as M2M) Yes Yes Yes Yes Yes 1.4.1.0
1. First available in the E7530A at 1.5.1.0. 2. Although VoLTE-related settings are included in the base TA, VoLTE calls require the E7530A -FFP-0P1 IP data
option and Keysight E6966B IMS-SIP server and/or client. 3. Available in scenario mode only. 4. WLAN calling requires an IMS-SIP server and client, such as the Keysight E6966B.
Find us at www.keysight.com Page 8
LTE and interRAT Mobility E7530A
Test Application
E7630A
A.01, A.02
E7630A
A.03, A.04
First Available
in Revision
Blind handover Yes Yes Yes 1.1.1.0
Blind handover including release with redirect
Yes Yes Yes 1.2.1.0
Blind handover with bandwidth change
Yes MEUv1.003 Yes 1.3.1.0
Cell reselection with W-CDMA1, 2 Yes Yes Yes 1.4.1.0
1. Requires two or more TRX sets (within one UXM or two UXMs connected in an array). 2. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test
application(s), with corresponding E75xxA-FFP-0H1 handovers option(s) and E75xxA-FFP-0P1 IP data option(s). 4. First available in the E7530A at 1.5.1.0. 5. VoLTE calls require IP data and Keysight E6966B IMS-SIP server and/or client. 6. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test
application(s), with corresponding E75xxA-FFP-0H1 handovers option(s). 7. Requires E7523A W-CDMA/HSPA+, E7521A GSM/GPRS/EGPRS, and/or E7529A TD -SCDMA/HSPA test
application(s) for voice-only CSFB. E75xxA-FFP-0H1 handovers option(s) and E75xxA-FFP-0P1 IP data option(s) also required for voice + data CSFB.
8. Available in scenario mode only. 9. Requires other feature option(s) as a pre-requisite, including carrier aggregation option(s) for the desired number of
carriers. See the Keysight UXM Wireless Test Set Configuration Guide, li terature number 5991- 4078EN.
LTE Measurements
E7530A
Test Application
E7630A
A.01
E7630A
A.02
E7630A
A.03
E7630A
A.04
First Available
in Revision
6.2.2 UE maximum output power Yes Yes Yes Yes Yes 1.2.1.0
6.2.3 Maximum power reduction (MPR)
Yes Yes Yes Yes Yes 1.2.1.0
6.2.4 Additional MPR Yes Yes Yes Yes Yes 1.2.1.0
6.2.5 Configured UE transmitted output power
Yes Yes Yes Yes Yes 1.2.1.0
6.3.2 Minimum output power Yes Yes Yes Yes Yes 1.2.1.0
6.3.4.1 General ON/OFF time mask Yes Yes Yes Yes Yes 1.2.1.0
6.3.4.2.1 PRACH time mask Yes Yes Yes Yes Yes 1.2.1.0
6.3.4.2.2 SRS time mask Yes Yes Yes Yes Yes 1.2.1.0
1. Requires external signal generator. 2. Requires external signal analyzer.
LTE-A Measurements E7530A
Test Application
E7630A
A.01
E7630A
A.02
E7630A
A.03
E7630A
A.04
First Available
in Revision
6.2.2A.1 UE maximum output power for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.2.3A.1 Maximum power reduction (MPR) for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.2.4A.1 Additional MPR for CA E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.2.5A.1 Configured UE transmitted output power for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.2A.1 Minimum output power for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.4A.1.1 General ON/OFF time mask for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.4A.2.1.1 PRACH time mask for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
Find us at www.keysight.com Page 12
LTE-A Measurements E7530A
Test Application
E7630A
A.01
E7630A
A.02
E7630A
A.03
E7630A
A.04
First Available
in Revision
6.3.4A.2.2.1 SRS time mask for CA E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.5A.1.1 Power control absolute power tolerance for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.5A.2.1 Power control relative power tolerance for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.3.5A.3.1 Aggregate power control tolerance for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.5.1A.1 Frequency error for CA E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.5.2A.1.1 Error vector magnitude (EVM) for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.5.2A.2 .1 Carrier leakage for CA E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.5.2A.3.1 In-band emissions for non-allocated RB for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.6.1A.1 Occupied bandwidth for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.6.2.1A.1 Spectrum emission mask for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.6.2.2A.1 Additional spectrum emission mask for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.6.2.3A.1 Adjacent channel leakage power ratio for CA
E7530A-CFP-xDD2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes Yes 1.3.1.0
6.6.3.1A.1 Transmitter spurious emissions for CA
E7530A-CFP-xDD1, 2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes1
Yes1 1.3.1.0
6.6.3.2A.1 Spurious emission band UE co-existence for CA
E7530A-CFP-xDD1, 2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes1
Yes1 1.3.1.0
6.6.3.3A.1 Additional spurious emissions for CA
E7530A-CFP-xDD1, 2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes1
Yes1 1.3.1.0
6.7A.1 Transmit intermodulation for CA
E7530A-CFP-xDD1, 2
E7530A-CFP-
xDD2
E7530A-CFP-xDD2 Yes1
Yes1 1.3.1.0
FDD inter-band UL CA measurements
E7530A-CFP-FDD2
E7530A-CFP-
FDD2
E7530A-CFP-FDD2
E7530A-CFP-
FDD2
Yes 1.4.1.0
TDD inter-band UL CA measurements
E7530A-CFP-TDD2
E7530A-CFP-
TDD2
E7530A-CFP-TDD2
E7530A-CFP-
TDD2
Yes 1.4.1.0
1. Requires external signal analyzer. 2. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,
Test Application E7630A A.01 E7630A A.02 E7630A A.03 E7630A A.04
First Available in Revision
7.3A Receiver sensitivity level for CA
E7530A-CFP-
xDD2
E7530A-CFP-
xDD2
E7530A-CFP-
xDD2
Yes Yes 1.3.1.0
7.4A Maximum input level for CA
E7530A-CFP-
xDD2
E7530A-CFP-
xDD2
E7530A-CFP-
xDD2
Yes Yes 1.3.1.0
7.5A Adjacent channel selectivity (ACS) for CA
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
7.6.1A In-band blocking for CA E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
7.6.2A Out-of-band blocking for CA
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
7.6.3A Narrow band blocking for CA
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
7.7A Spurious response for CA E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
7.8.1A Wide band intermodulation for CA
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
E7530A-CFP-
xDD1, 2
Yes1 Yes1
1.3.1.0
1. Requires external signal generator. 2. Requires other feature option(s) as a pre-requisite. See the Keysight UXM Wireless Test Set Configuration Guide,
literature number 5991-4078EN.
NB-IoT Measurements E7530A Test Application E7630A Lab Application First Available in
Revision
6.2.2F UE maximum output power T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0
6.2.3F Maximum power reduction (MPR) T9080C-3FP (E7530A-GFP-0NB) T9080C-3FP (E7530A-GFP-0NB) 1.8.1.0
1.eMTC PRACH demodulation is under planning and to be confirmed. 2. Requires external signal analyzer and fil ters. 3. Requires external signal generator.