SS-208D 12/03 PRODUCT SPECIFICATIONS www.goodmanmfg.com Cased & Uncased Upflow & Downflow Evaporator Coils The cased and uncased upflow and downflow evaporator coils are made for split system air conditioners and heat pumps and may be installed in a closet, utility room or basement. Standard Features • Compact, versatile, upflow or downflow position • Copper tube aluminum fin coil • Fully insulated cabinet on cased coils • Equipped with a check flowrator for heat pump and cooling unit operation • No rust high temperature thermoplastic drain pans for upflow and downflow application with secondary drain U/UC SERIES Cabinet Construction • Insulated steel cabinet • No rust galvanized stucco finish Accessories • Downflow kits (DFK or DFKT) used for all multi-position furnaces for downflow applications 1 to 5 Ton
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SS-208D 12/03
PRODUCT SPECIFICATIONS
www.goodmanmfg.com
Cased & UncasedUpflow & Downflow
Evaporator Coils
The cased and uncased upflow and downflow evaporator coils are made for
split system air conditioners and heat pumps and may be installed in a closet,
utility room or basement.
Standard Features• Compact, versatile, upflow or downflow
position• Copper tube aluminum fin coil• Fully insulated cabinet on cased coils• Equipped with a check flowrator for heat pump
and cooling unit operation• No rust high temperature thermoplastic drain
pans for upflow and downflow application with secondary drain
U/UC SERIES
Cabinet Construction• Insulated steel cabinet• No rust galvanized stucco finish
Accessories• Downflow kits (DFK or DFKT) used for all
NOTES:1) See back sheet for installation tips.2) Do not use this coil on oil furnaces or any applications where the temperature on drain pan may exceed 300°f. Use the following metal drain
pans: 15236-18 (u-18 thru u-32), 15236-19 (u-36 thru u-47), 15236-20 (u/uc-60 thru u-61), and field fabricated metal pan for (u/uc-49, u/uc-59, and u/uc-62).
3) * Uc-29 comes with 2 ton flowrater b13134-59. If 2-1/2 ton matching is required, install provided piston kit b17898-65.
NOTE: for drain pan specifications, refer to note 2 on page 2.1.) * U-29 comes with 2 ton flowrator b13134-59. If 2 1/2 matching is required, install provided piston KIT B17898-65.
NOTE:1. Do not use this coil on oil furnaces or any applications where the temperature on drain pan may exceed 300°F. Use the following metal
drain pans: 15236-18 (U-18 thru U-32), 15236-19 (U-36 thru U-47), and 15236-20 (U/UC-60 thru U-61).2. Due to the rating mix/match of various coils with outdoor units it is important to match the furnace air flow for the total system capacity.
(Refer to the furnace sheet & spec. sheet & condenser/heat pump spec. sheet.)