1 Quit Using the classroom DVD Player Overview Use this documentation is used to show how to use the DVD players that are located in classrooms. Learning Objective Independently learn how to DVD players that are located in new learning areas. Prerequisit es Knowledge of: how to operate a remote controller, how to operate a stand alone DVD player Access to: classroom with permanently installed DVD player Primary Audience Lake Forest Country Day School Faculty and Staff Author Mara Grujanac, Technology Curriculum Coordinator Keith Gillette, Director of Information Technology Lake Forest Country Day School Instruction s Arrows change slides. Print button prints all slides to default printer. Quit exits.
Using the classroom DVD Player. Using the classroom DVD Player. Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote Point remote at projector & push the red Power button The projector will beep - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1Quit
Using the classroom DVD Player
Overview Use this documentation is used to show how to use the DVD players that are located in classrooms.
Learning
Objective
Independently learn how to DVD players that are located in new learning areas.
Prerequisites Knowledge of: how to operate a remote controller, how to operate a stand alone DVD player
Access to: classroom with permanently installed DVD player
Primary
Audience
Lake Forest Country Day School Faculty and Staff
Author Mara Grujanac, Technology Curriculum Coordinator
Keith Gillette, Director of Information Technology
Lake Forest Country Day School
Instructions Arrows change slides. Print button prints all slides to default printer. Quit exits.
2Quit
Using the classroom DVD Player
1. Turn on Epson projector remote control by sliding slider switchto right of red Power button toward front of remote
2. Point remote at projector & push the red Power button– The projector will beep– The status light on the projector will flash green– The projector will display auto-setup on the screen
3. Push the Video source button on projector remote
4. Push the power button on the DVD player
3. Press Open/Close– Place DVD in tray & press Open/Close– Press Play or use Samsung remote to control DVD
4. Adjust ceiling speaker volume with Anchor remote
3Quit
The End!
Document Control
Version Date Complete Author Description Date Approved Approved By
0.01 2007-05-17 Grujanac, Mara Initial Draft N/A N/A
1.0 2010-08-25 Gillette, Keith Made it better N/A N/A
Still have a question? Contact the IT Service Center for further assistance: