White USG ENSEMBLE ™ ACOUSTICAL DRYWALL CEILING SEAMLESS DRYWALL LOOK WITH TRUE ACOUSTICAL PERFORMANCE FEATURES • Nondirectional, monolithic appearance • Special perforated USG Sheetrock® Brand panels to optimize sound performance • Installs and finishes similar to traditional wallboard • NRC 0.80 and CAC 44 • High light-reflective finish (LR-0.85) reduces fixture and energy use • Acoustically transparent spray-applied finish APPLICATIONS • Reception areas • Lobbies • Conference rooms • Restaurant dining areas • Museums • Galleries • Spaces with multiple hard surfaces • Courtrooms • Offices • Classrooms/ higher education • Libraries • Healthcare offices and lobbies • Retail White USG Ensemble™ Acoustical Drywall Ceiling with USG Compässo™ Elite for drywall edge trim. USG Ceiling Solutions
2
Embed
USG Ensemble™ Acoustical Drywall Ceiling Data Sheet ... · USG Corporation or its a˜ liates. Safety First! Follow good safety/industrial hygiene practices during installation.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• Nondirectional, monolithic appearance• Special perforated USG Sheetrock® Brand panels to optimize sound
performance• Installs and fi nishes similar to traditional wallboard• NRC 0.80 and CAC 44• High light-refl ective fi nish (LR-0.85) reduces fi xture and energy use• Acoustically transparent spray-applied fi nish
APPLICATIONS
• Reception areas• Lobbies• Conference rooms• Restaurant dining areas• Museums • Galleries• Spaces with multiple hard surfaces
• Courtrooms• O� ces• Classrooms/ higher education • Libraries• Healthcare o� ces and lobbies• Retail
Manufactured byUSG Interiors, LLC550 West Adams StreetChicago, IL 60661
NoticeThe information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document.
Indexed Support Bar Attachment Clipinstalled at every hanger wire (48" o.c. max.)
USG Ensemble™ High-NRC Backer panels
12 ga. hanger wire
USG Sheetrock® Brand Paper Tape embedded in USG Sheetrock® Brand All Purpose Joint Compound and finished with USG Sheetrock® Brand Ensemble™ Ceiling Compound
USG Sheetrock® Brand Ensemble™ Panels
USG Fiberock®Brand End-joint Backer Panel
LIMITATIONS 1. For interior ceilings only.2. Not for use in areas subject to continuous high heat and/or humid conditions.3. Not for use in plenums with di� erential pressure. Return air ducts shall be installed according to ASHRAE standards and guidelines.. 4. Install according to Section 5 Environmental Conditions listed in ASTM C840.5. In order to ensure installed performance, component substitutions are not permitted.
The trademarks USG, CGC, COMPÄSSO, ENSEMBLE, FIBEROCK, SHEETROCK, IT’S YOUR WORLD. BUILD IT., the USG and CGC logos, the design elements and colors, and related marks are trademarks of USG Corporation or its a� liates.
Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specifi cation and installation.