-
IBM
Maximo
Integration for Autodesk
Revit 2013 products
User Documentation
Autodesk, BIM 360 and Revit are registered trademarks or
trademarks of Autodesk, Inc., and/or its subsidiaries and/or
affiliates, in the USA
and/or other countries. IBM and Maximo are registered trademarks
of International Business Machines Corporation. All other brand
names,
product names, or trademarks belong to their respective holders.
Autodesk reserves the right to alter product and services
offerings, and
specifications and pricing at any time without notice, and is
not responsible for typographical or graphical errors that may
appear in this
document.
2012 Autodesk, Inc. All rights reserved.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Table of Contents Overview
.......................................................................................................................................................
3
Export BIM Model from Revit to Maximo
.................................................................................................
3
3D Visualization inside Maximo
................................................................................................................
4
Users Guide
...................................................................................................................................................
6
Project Setup
.............................................................................................................................................
6
System, Site and Top Location
..............................................................................................................
6
Autodesk COBie Toolkit
........................................................................................................................
6
Shared and Project Parameters
............................................................................................................
7
Rooms and Levels
..................................................................................................................................
7
Revit Categories File
..............................................................................................................................
7
Parameter Mapping File
.......................................................................................................................
8
Run the Add-in
........................................................................................................................................
13
Export to Maximo
...................................................................................................................................
13
Maximo Information Page
..................................................................................................................
13
Revit Assets Page
................................................................................................................................
16
Autodesk BIM 360 Glue
......................................................................................................................
17
Export Preview Page
...........................................................................................................................
17
Export Results Page
.............................................................................................................................
18
Inside Maximo
.........................................................................................................................................
20
FAQ / Troubleshooting
............................................................................................................................
20
Model Not Visible in Autodesk BIM 360 Glue
.....................................................................................
20
Autodesk BIM 360 Glue Login Error
....................................................................................................
21
Maximo Field Length
Error..................................................................................................................
22
Units
....................................................................................................................................................
22
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Overview The IBM Maximo Integration for Autodesk Revit 2013
products is a Revit software application add-in that extends the
value of a Revit building information model (BIM) into the
operations phase of the building lifecycle. Richly attributed data
about building assets that are developed in Revit during the
building design and construction phases, can be published directly
into Maximo during commissioning or at building handover, thus
supporting more immediate and effective use of Maximo once the
building is occupied. The Revit Maximo integration supports the
COBie data specification and visualization of model assets inside
Maximo, in context with Maximo applications and processes, to
foster more efficient work order management and building
maintenance activities.
The integration consists of an add-in to Revit 2013 products and
integrated visualization of Autodesk BIM 360TM Glue inside Maximo
version 7.1 or newer. In terms of implementation requirements, the
integration will require Maximo version 7.x licenses and
implementation expertise; and a Revit 2013 license and model data
that have been attributed with information appropriate for use in
Maximo. The integration will also require a license of Autodesk BIM
360 Glue The tool has the following features:
- Guided process to select the Revit objects to export to Maximo
- Pre-export validation and error reporting - Support of COBie
schema, including attributes - Creation of Maximo Locations and
Assets including Classifications and Specifications - In-context 3D
visualization of the model - Advanced visualization capabilities
including filtering, search, and access to object BIM
properties etc.
Export BIM Model from Revit to Maximo
The add-in allows exporting a BIM model from Revit into Maximo.
You can export Revit Levels, Rooms and Assets, including their
properties to Maximo. The BIM model is exported using a subset of
the COBie standard (http://www.wbdg.org/resources/cobie.php). The
following sheets from the COBie schema are supported:
Floor
Space
Type
Component
Attribute The data exported into Maximo is organized as per the
COBie hierarchy shown in Figure 1. Revit COBie templates available
in the Autodesk COBie toolkit can also be used alongside this
add-in.
http://www.wbdg.org/resources/cobie.php
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 1: COBie Hierarchy in Maximo
3D Visualization inside Maximo
Maximo uses Autodesk BIM 360TM Glue for 3D Visualization.
Detailed documentation about Autodesk BIM 360 Glue can be found at
http://wikihelp.autodesk.com/BIM_360_Glue/enu/Help. Below is an
example of BIM 360 Glue.
http://wikihelp.autodesk.com/BIM_360_Glue/enu/Help
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 2: Autodesk BIM 360 Glue Viewing
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Users Guide Before running the add-in, project as well as
application setup may be required.
Project Setup
System, Site and Top Location
The Revit add-in will export information to Maximo within an
existing Maximo System, Site and Location. Typically the System and
Site are created by a Maximo administrator according to the
conventions of your installation. A common System name is Primary
and Site names tend to reflect a buildings physical location or
campus location (e.g. Boston). Under a site, you must manually
create a top location in Maximo under which the BIM model from
Revit will be placed. So if you have a building, you will have to
create a top location in Maximo with the name of the building (e.g.
Building 1). Note that you can export information from multiple
Revit files to a single top location. So if you have 3 Revit files
for a single building, it is fine to export all 3 to the same
single top location. To insure that assets and locations exported
from multiple Revit files have unique identifiers in a Maximo
system, you must assign a unique 2 character prefix project code
associated with each Revit file. This is accomplished on the Maximo
Information Page of the Revit Maximo Integration add-in setting for
Project 2 Character Prefix To maximize the value of the Maximo
integration for Revit add-in, during the design and construction of
your building you can store important asset information in your
Revit file using shared parameters and project parameters. Then
when the building is complete, you may easily export that
information into Maximo for use during the operation and
maintenance of the building. For example, if you store information
in your Revit file about the warranty, manufacturer and serial
numbers of assets in your building, that information can be
exported into Maximo automatically using the add-in.
Autodesk COBie Toolkit
If you are using COBie, an excellent way to get started is to
use the Autodesk COBie Toolkit for Revit, available here:
http://usa.autodesk.com/adsk/servlet/oc/offer/form?siteID=123112&id=18070390
There are files in this toolkit which enable you to create your
Revit files from COBie Revit template files, which include the
needed COBie project parameters. Or if you have existing Revit
files, you can use files in this toolkit to add the COBie project
parameters to your existing Revit files.
http://usa.autodesk.com/adsk/servlet/oc/offer/form?siteID=123112&id=18070390
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Once you have the COBie project parameters in your Revit file,
you can store COBie information in your Revit file and easily
export that information into Maximo.
Shared and Project Parameters
You should think about what information you want to store in
your Revit file and, as needed, create shared and project
parameters in your Revit file for that information. For example,
you may want to store asset warranty, manufacturer and serial
number information in your Revit file. See Revits documentation on
creating shared and project parameters for more information. The
templates and shared parameter files available in the COBie toolkit
mentioned above are one example of how you might store asset
information in your Revit files. The Revit Maximo Integration
add-in may be customized to work with whatever shared and project
parameters you choose to use. See the parameter mapping file
portion of this documentation for details about how to customize
the add-in to work with your project parameters.
Rooms and Levels
The rooms and levels in your Revit file will be exported into
Maximo. Hence you may want to check that the rooms and levels in
your Revit file are defined and named properly before doing an
export. Also, assets will be placed in their parent room, level or
building location in Maximo. So an asset in a room in Revit will be
placed in the corresponding room location in Maximo. An asset not
in a room but in a Revit level will be placed in a location
corresponding to that level in Maximo. So it is recommended that
you inspect the structure of your Revit model and make sure that
all the rooms and levels are defined and named as you want. Its
also recommended that you check that your assets are in the proper
rooms and levels.
Revit Categories File
By default, a subset of the Revit Model Categories is displayed
in the add-in on the Revit Assets page. These categories represent
the most common asset categories that are typically managed inside
Maximo. Users can configure the add-in to display the Revit
Categories that suit their Export workflow.
Open the folder where the add-in was installed in Windows
Explorer.
Open the RevitCategories.config file in any text editor (e.g.
Notepad). The file contains all Revit
Categories and specifies which categories should be shown in the
UI on the Revit Assets page.
The RevitCategories.config file is a standard XML file, portions
shown below. Using a simple text
editor like Notepad, you can change the visible property of a
CategoryType or Category by
changing visible=false to visible=true.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 3: Example Revit Categories File
Parameter Mapping File
Revit and Maximo store information differently with different
names and types and the Maximo integration for Revit add-in needs
to understand how you store information in Revit and Maximo and how
to map between them. For example, you might store a serial number
as a property named Serial Number in Revit. And in Maximo you might
store that as a field named SerialNum on an asset. The parameter
mapping file enables you to instruct the add-in to map Serial
Number in Revit to SerialNum in Maximo:
Revit Property Serial Number Maximo Field SerialNum
Additionally, you may want to specify a default value for a
field in Maximo, to be used when there is no corresponding property
in Revit. The parameter mapping file enables this also. A parameter
mapping file with at least the required Maximo fields specified is
required to run the add-in.
Example Files
Two parameter mapping files are installed in your installation
folder:
RevitMaximoParameterMap.txt contains the minimum required
mappings RevitMaximoParameterMap_COBie.txt contains COBie
mappings
You typically would copy one of these two parameter mapping
files and edit your copy with your favorite text editor (e.g.,
Notepad) to meet your needs. Do not use Microsoft Word, as it will
add non-text characters to the file, making it unusable. Usually
you would edit one of these files to specify the Revit properties
that you want to export to Maximo, where the mappings tell the
add-in where in Maximo to put the property values.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
File Structure
The comments at the top of the two parameter mapping files have
a lot of information about the structure of the file. That
information is repeated here. Each line of a parameter mapping file
is either a comment, a blank line, or a parameter mapping. Comment
lines start with a # character. Everything on a comment line is
ignored. Blank lines are also ignored. On lines with mapping
information (e.g., neither blank nor a comment), the information on
that line is split into columns separated by semi-colons (;) and
each line must have 6 semi-colons, meaning it has 7 columns. White
space spaces and tabs is ignored. Names are case-insensitive. Each
mapping applies to a single object type and a single Revit
property. The order of the mappings is unimportant. The mappings in
the sample files are ordered by object type but that is not
necessary.
Column Definitions
The column definitions for a single mapping line are:
Column Number
Column Name
Definition
1 Object Type The type of object affected by this mapping. The
legal values for this column are Facility, Level, Room and
Asset.
2 Revit Property Name
The name of the Revit property for this mapping. This is always
of the form Xxx.Yyy where Xxx is a Revit object type or special
name and Yyy is a property or special name. Details about this are
in the next section of this document on Revit Property Names.
3 Maximo Field or Attribute Name
The name of the Maximo field or attribute to which the Revit
property named in column 2 should be mapped. Note that Maximo
fields are always uppercase, so whatever you enter in this column
for a Maximo field will be automatically uppercased by the
add-in.
4 Maximo Field or
Attribute
Indicates if this mapping is to a Maximo field or attribute. The
legal values for this column are Field or Attribute. A field is a
property of a Maximo object. An attribute is a separate object
within Maximo that is associated with a location or asset.
Attributes are listed on the Specifications tab for an object in
the Maximo web application.
5 Maximo Field or Attribute Type
Indicates the type of the Maximo field or attribute. A Maximo
attribute must be ALN (alphanumeric) or NUMERIC (a number). A
Maximo field can be many types see the Maximo web application for a
full list.
6 Maximo Field or Optional. If specified, indicates the default
value to export to
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Attribute Default Value
Maximo if the corresponding Revit object does not contain the
mapping property or the property value is empty.
7 Comment Optional. A comment on the mapping, helpful when
reading the parameter mapping file but otherwise ignored.
Note that the last 2 columns are optional but the semicolons
between them are not. You must have 6 semicolons on each mapping
line in the file.
Revit Property Names
As stated in the previous section, column 2 of a mapping is the
Revit Property Name. In more detail, those Revit Property Names are
of the form Xxx.Yyy where Xxx is the Revit object type and Yyy is
the property of that object type. Possible Object Types you can use
are:
Object Type Description
ProjectInformation The Revit files Project Information, visible
in Revit when you click the Manage tab and then the Project
Information button. It contains the global properties for your
Revit file, including the project name and creation date.
ProjectUnit The Revit files Project Unit object, visible in
Revit when you click the Manage tab and then the Project Unit
button. It contains the Revit project unit information.
Revit Global Revit information. Version being the one property
that is supported currently, which returns the version of Revit you
are running (e.g. Revit 2013).
Instance The current object. So for an asset, it is the
FamilyInstance or HostObject object. For a level, its the Level
object. For a room, its the Room object.
Type For an asset, this is the assets type, or FamilySymbol.
Many properties are available on an assets type including things
like the Manufacturer, Model Number, etc.
Family For an asset, this is the assets family, or Family.
Again, many useful properties are available on an assets
family.
Computed A special name for computed values. For example,
Computed.Description is the computed description of an asset. See
below for a full list of Computed properties you can use.
Possible property names for these object types are all of the
properties, including project parameters that you have defined. See
the COBie example parameter mapping file for many examples of how
to create Revit Property Names.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Special Property Names
Sometimes you will need to supply Maximo with values that are
not really Revit properties. In these cases, the add-in has special
property names you can use. These are:
Special Property Name Revit Types Value Comment
Revit.Version All The version of Revit that you are running. For
example Autodesk Revit 2013.
This is useful when exporting COBie EXSYSTEM values to
Maximo.
Type.Revit.Object or Instance.Revit.Object
All The name of the Revit internal type of the object.
This is useful when exporting COBie EXOBJECT values to
Maximo.
Type.UniqueId or Instance.UniqueId
All The unique ID of the Revit object.
These are globally unique strings for Revit objects.
Computed.Description Assets The assets Category Name
concatenated with its own Name.
Asset names are often very short and not useful, but much
clearer when combined with the Category name.
Instance.Name Assets The assets name.
Room.Name Room The rooms name.
Level.Name Room The rooms levels name.
Type.Name FamilyInstance Assets
The assets Type name. The Type name is often more descriptive
than the assets name.
Family.Name FamilyInstance Assets
The assets Family name.
The Family name is often more descriptive than the assets
name.
Example Mapping One Asset Manufacturer
Here is an example mapping for an asset manufacturer:
Asset;Type.Manufacturer;MANUFACTURER;Field;ALN;;COBie Type
Manufacturer Column 1 of this mapping Asset - indicates the mapping
is for assets. Column 2 of this mapping Type.Manufacturer indicates
that the Revit value is the name of the Revit Type (e.g.
FamilySymbol).
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Column 3 of this mapping MANUFACTURER indicates the Maximo name
of the field or attribute. For clarity, this is all uppercase, as
Maximo always has field names. Column 4 of this mapping Field
indicates the mapping is to a field, not an attribute, in Maximo.
In other words, this mapping is used when the asset is created in
Maximo, not created later as an attribute of the asset. Column 5 of
this mapping ALN indicates the Maximo type of the field is ALN
(alphanumeric). Column 6 of this mapping is empty, indicating there
is no default value. Column 7 of this mapping COBie Type
Manufacturer is a comment. This mapping says the add-in should take
the Revit assets types name and export it to Maximo as the
MANUFACTURER field of the asset. There is no default value.
Example Mapping Two Asset Cost
Here is an example mapping for an asset cost:
Asset;Type.Cost;REPLCOST;Attribute;ALN;;COBie Type ReplacementCost
Column 1 of this mapping Asset - indicates the mapping is for
assets. Column 2 of this mapping Type.Cost indicates that the Revit
value is the Cost property of the Revit Type (e.g. FamilySymbol).
Column 3 of this mapping REPLCOST indicates the Maximo name of the
field or attribute. Column 4 of this mapping Attribute indicates
the mapping is to an attribute, not a field, in Maximo. In other
words, this value will appear on the Specifications tab in Maximo.
Column 5 of this mapping ALN indicates the Maximo type of the
attribute is ALN (alphanumeric). Column 6 of this mapping is empty,
indicating there is no default value. Column 7 of this mapping
COBie Type ReplacementCost is a comment. So this mapping says the
add-in should take the Revit assets types Cost property and export
it to Maximo as the REPLCOST attribute of the asset. There is no
default value.
Validation of Parameter Mapping File
After you manually edit your parameter mapping file, you can
validate it by running the Maximo integration for Revit add-in and
entering the parameter mapping file in the first screen of the
add-in.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
The add-in will give you detailed error messages if the
parameter mapping file has issues, telling you exactly which lines
and columns have problems.
Run the Add-in
After installation and customizing your parameter mapping file,
you are ready to run the Maximo integration for Revit add-in.
1. Run Revit and open a BIM model that needs to be exported to
Maximo.
2. Click on the Add-Ins tab in Revit and you should see the
Revit Maximo Integration buttons in the
ribbon, as shown below.
Figure 4: Revit Maximo Integration add-in Ribbon Buttons
If you do not see the add-in buttons, then your installation
failed and you should uninstall and reinstall the add-in or repair
your installation. If the add-in buttons are disabled, make sure
you have opened a Revit document and a graphical view of the
document is the active view.
Export to Maximo
Click on the Export to Maximo button in the ribbon and an export
wizard will open. This will guide the user through the export
process.
Maximo Information Page
The Maximo Information page contains the information you need to
enter for the add-in to contact Maximo and to export information to
Maximo. Note: you must contact the Maximo administrator for the
correct username and password required for object structure web
service access. If username and password authentication is not
required for object structure web service access, then the object
structure web services used by the add-in may only be enabled for
the duration of the export procedure. For further details on object
structure web services required by the add-in, refer to the
Installation Guide document of the IBM Maximo Integration for
Autodesk Revit 2013 products which describes the Maximo
installation requirements and procedures.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 5: Maximo Information
Server URL
This is the URL to the Maximo web services. This URL should be
setup by your Maximo administrator, after following the steps to
setup Maximo mentioned earlier in this document. An example of a
typical server URL will be: http://servername:port/webservice
Servername The name of your Maximo server computer. Port This is
optional and depends on how the Maximo server was configured by the
administrator. Port 9080 is a common port number used for Maximo,
but another port number could be used. Webservice The name of the
webservice. This is the last part of the URL and is typically
meaweb.
Username and Password
Maximo username and password. These credentials must have the
rights to create locations and assets in Maximo.
Site name
The name of the Site in Maximo under which the BIM
model/building is located. Refer to Figure 1 for details.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Top location name
The name of the location in the site where information for the
current Revit file should be placed. Typically this is a location
youve created manually in Maximo for the building.
Project 2 character prefix
This represents the code for the Top location under which the
add-in will create Maximo Locations and Assets. This 2-char code is
added at the start of every Location and Asset ID that the add-in
creates in Maximo. It is important that a unique 2 character prefix
must be chosen for each BIM model that is exported to Maximo. For
example, you might choose AB as the project prefix for one Revit
file and AC for another Revit file. If a unique 2 character prefix
for each BIM model is not specified, you will potentially cause
errors exporting to Maximo, as the add-in will try to create 2
different objects with the same ID, which will be rejected by
Maximo.
System name
The name of the System in Maximo where information from the
Revit BIM model should be placed. A common name for a system is
PRIMARY. Additional systems may be created by your Maximo
administrator.
Parameter mappings file
The path to the parameter mapping file. This file must exist and
must be valid. Details about the mapping file are provided under
the Parameter Mapping section.
Upon clicking the Next button, the information entered on this
page will be validated by contacting the Maximo server and by
reading the parameter mapping file. If they are not valid, an error
will be displayed and you must fix the error before proceeding.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Revit Assets Page
The Revit Assets page is where you specify the levels and
categories of assets to export to Maximo.
Figure 6: Revit Assets
A single BIM model can be exported multiple times into Maximo in
small chunks. For example, the first time you may choose to export
Level 1. The second time you may export Level 2 and so on. The tool
recognizes if the same level, room or asset is being exported twice
and will not export it the second time.
Troubleshooting
It is recommended that you export a small number of assets
initially and verify that they were correctly exported to Maximo.
You can export a single level and single category, verify that all
those assets were exported correctly and then click the Back button
in the wizard and choose more levels and more categories. If you do
not see categories listed for assets you want to export, you can
make more categories visible by editing the RevitCategories.config
file and running the add-in again. See the Revit Categories File
section of this document.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Autodesk BIM 360 Glue
Figure 7: BIM 360 Visualization
In the BIM 360 Visualization step of the add-in, you can make 2D
and 3D views of your Revit file viewable for Maximo users.
Export Preview Page
The Export Preview page shows the choices that have been made in
previous pages and in the tree on the right, the levels, rooms and
assets that will be exported to Maximo.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 8: Export Preview
Before doing the actual export, you may choose to do additional
validation. The following choices are available in the Action to
perform dropdown:
Validate assets in Maximo
If you choose this action to perform and then click the Validate
button, the add-in will validate that all the levels, rooms and
assets can be created in Maximo and report the results. This is a
quick, safe and easy way to validate that your export should work
before doing the actual export. No Locations and Assets are created
in Maximo.
Export assets in Maximo
This option performs the actual export to Maximo and creates the
Locations and Assets. After verifying that everything looks correct
and/or doing a validation, choose this option in the dropdown and
click Export to start the export process.
Export Results Page
The Export Results page shows the results of your Validation or
Export.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Figure 9: Export Results
Summary Table
The top portion of the page shows the number of classifications,
levels, rooms, assets and attributes that were successfully
exported or validated, already existed, had a length failure or
some other failure. A length failure is when the export or
validation failed because the particular field in Maximo had a
length shorter than the property being exported. For example, the
Description field in Maximo may be defined as having only 12
characters while the description value that we are trying to export
has more than 12 characters. To fix this error, the Maximo field
lengths will need to be increased or the Revit property values will
have to be shortened. A missing information failure is when an
object cannot be created in Maximo because some required field is
missing. It could be missing due to the field not being defined or
not having a default value in your parameter mapping file. Check
the Details area of the Export Results page and the log file for
more details about the error. See the Details area and the log file
for information about other failures.
Details
The Details area shows a portion of the log file with more
detail about the export or validation. This is where you should
look for details about failures.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
Log file
At the bottom is a link to the log file, containing details for
all the actions youve done since you started the add-in. A new log
file is created every time you start the add-in. At this point you
can click the Back button and change your settings, change the
Revit levels and categories to export, and do another validation or
export. It is perfectly fine to click Back multiple times and do
multiple exports all within one session of the add-in. When you are
finished with add-in, click the Close button.
Inside Maximo
After exporting asset information and 3D viewing information to
Maximo, you can view it by opening the Maximo web application. The
model exported from Revit is organized as per the COBie hierarchy
as shown in Figure 1. A top level classification called REVIT is
created. Any Revit properties that have been specified to be
exported in the Parameter Mapping file are exported under this
REVIT classification and show up on the Specifications tab in
Maximo.
FAQ / Troubleshooting
The following are some commonly-asked questions and how to solve
them.
Model Not Visible in Autodesk BIM 360 Glue
You have uploaded your Navisworks NWC/NWD or Autodesk DWF/DWFX
file to Autodesk BIM 360 Glue for viewing but when you login to
Autodesk BIM 360 Glue you are unable to see the model. The first
step to try to resolve this issue is to switch from OpenGL to
DirectX graphics in the BIM 360 Glue client. Click on the Options
button in the top right below and then click DirectX in the Options
dialog. Youll need to close and reopen your project in BIM 360 Glue
for this change to take effect.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
If this does not solve your problem, try clicking on the 2D Mode
button just above the Options button. This will put BIM 360 Glue in
the correct mode for 2D views of your model.
Autodesk BIM 360 Glue Login Error
You are running the add-in and have an Autodesk BIM 360 Glue
username and password, but when you enter them in the add-in and
try to login to BIM 360 Glue, you get an error dialog as shown
below saying something is wrong with your system clock.
-
IBM MAXIMO
INTEGRATION FOR AUTODESK
REVIT
2013 PRODUCTS USER DOCUMENTATION
The problem here is your computers clock or time zone is
incorrect. To fix, this please adjust your computers clock and time
zone to be correct. You can attempt to login to BIM 360 again
immediately after fixing your clock without closing the add-in.
Maximo Field Length Error
You are running the add-in and seeing error dialogs about field
length errors. You are not sure what these are nor what to do about
them. Field length errors are errors that Maximo returns when the
add-in sends a property or specification value whose length is
longer than Maximo can store. For example, some built-in fields in
Maximo (e.g. MANUFACTURER) have small limits a dozen or so
characters by default in Maximo. Our Maximo installation script
increases the field lengths of some fields in Maximo. But you may
need to manually increase these fields even more or increase other
fields in Maximo to avoid these problems.
Units
The add-in exports values from Revit to Maximo as-is and without
any unit conversion. It is recommended that users check and ensure
that the BIM model and Maximo project are using the same Units
scheme before exporting the BIM model into Maximo.