-
United StatesDepartment ofAgriculture
A product of the NationalCooperative Soil Survey,a joint effort
of the UnitedStates Department ofAgriculture and otherFederal
agencies, Stateagencies including theAgricultural
ExperimentStations, and localparticipants
Custom Soil ResourceReport forAntelopeCounty,NebraskaRoyal
Area
NaturalResourcesConservationService
December 4, 2012
-
PrefaceSoil surveys contain information that affects land use
planning in survey areas. Theyhighlight soil limitations that
affect various land uses and provide information aboutthe
properties of the soils in the survey areas. Soil surveys are
designed for manydifferent users, including farmers, ranchers,
foresters, agronomists, urban planners,community officials,
engineers, developers, builders, and home buyers.
Also,conservationists, teachers, students, and specialists in
recreation, waste disposal,and pollution control can use the
surveys to help them understand, protect, or enhancethe
environment.Various land use regulations of Federal, State, and
local governments may imposespecial restrictions on land use or
land treatment. Soil surveys identify soil propertiesthat are used
in making various land use or land treatment decisions. The
informationis intended to help the land users identify and reduce
the effects of soil limitations onvarious land uses. The landowner
or user is responsible for identifying and complyingwith existing
laws and regulations.Although soil survey information can be used
for general farm, local, and wider areaplanning, onsite
investigation is needed to supplement this information in some
cases.Examples include soil quality assessments
(http://soils.usda.gov/sqi/) and certainconservation and
engineering applications. For more detailed information,
contactyour local USDA Service Center
(http://offices.sc.egov.usda.gov/locator/app?agency=nrcs) or your
NRCS State Soil Scientist
(http://soils.usda.gov/contact/state_offices/).Great differences in
soil properties can occur within short distances. Some soils
areseasonally wet or subject to flooding. Some are too unstable to
be used as afoundation for buildings or roads. Clayey or wet soils
are poorly suited to use as septictank absorption fields. A high
water table makes a soil poorly suited to basements orunderground
installations.The National Cooperative Soil Survey is a joint
effort of the United States Departmentof Agriculture and other
Federal agencies, State agencies including the
AgriculturalExperiment Stations, and local agencies. The Natural
Resources ConservationService (NRCS) has leadership for the Federal
part of the National Cooperative SoilSurvey.Information about soils
is updated periodically. Updated information is availablethrough
the NRCS Soil Data Mart Web site or the NRCS Web Soil Survey. The
SoilData Mart is the data storage site for the official soil survey
information.The U.S. Department of Agriculture (USDA) prohibits
discrimination in all its programsand activities on the basis of
race, color, national origin, age, disability, and whereapplicable,
sex, marital status, familial status, parental status, religion,
sexualorientation, genetic information, political beliefs,
reprisal, or because all or a part of anindividual's income is
derived from any public assistance program. (Not all
prohibitedbases apply to all programs.) Persons with disabilities
who require alternative means
2
-
for communication of program information (Braille, large print,
audiotape, etc.) shouldcontact USDA's TARGET Center at (202)
720-2600 (voice and TDD). To file acomplaint of discrimination,
write to USDA, Director, Office of Civil Rights, 1400Independence
Avenue, S.W., Washington, D.C. 20250-9410 or call (800)
795-3272(voice) or (202) 720-6382 (TDD). USDA is an equal
opportunity provider andemployer.
3
-
ContentsPreface....................................................................................................................2How
Soil Surveys Are
Made..................................................................................6Soil
Map..................................................................................................................8
Soil
Map................................................................................................................9Legend................................................................................................................10Map
Unit
Legend................................................................................................11Map
Unit
Descriptions........................................................................................12
Antelope County,
Nebraska............................................................................142330Inavale
fine sand, rarely
flooded......................................................143163Doger
fine sand, 0 to 6 percent
slopes............................................153164Doger loamy
fine sand, 0 to 2 percent
slopes.................................153165Doger loamy fine sand,
2 to 6 percent slopes.................................163252Meadin
sandy loam, 0 to 2 percent
slopes......................................173255Meadin sandy
loam, 2 to 30 percent
slopes....................................183268O'Neill sandy loam,
2 to 6 percent
slopes........................................193280Paka complex, 0
to 2 percent
slopes...............................................193281Paka
complex, 2 to 6 percent
slopes...............................................203285Paka
loam, 0 to 2 percent
slopes....................................................213286Paka
loam, 2 to 6 percent
slopes....................................................224178Longford
complex, 1 to 7 percent
slopes.........................................234179Longford loam,
1 to 7 percent
slopes..............................................244240Ord fine
sandy loam, rarely
flooded.................................................254786Valentine
fine sand, 0 to 6 percent
slopes.......................................264807Valentine fine
sand,
rolling...............................................................274876Valentine-Simeon
complex, 0 to 3 percent
slopes...........................284878Valentine-Simeon complex, 3
to 6 percent
slopes...........................294879Valentine-Simeon complex, 6
to 11 percent
slopes.........................306320Barney-Boel-Calamus complex,
channeled.....................................326578Ortello fine
sandy loam, 0 to 1 percent
slopes.................................346635Boelus fine sand, 0 to
6 percent
slopes...........................................356636Boelus loamy
fine sand, 0 to 3 percent
slopes................................366637Boelus loamy fine sand,
2 to 6 percent
slopes................................376660Brunswick-Paka complex,
11 to 30 percent slopes.........................386700Thurman loamy
fine sand, 0 to 2 percent
slopes.............................396703Thurman loamy fine sand, 2
to 6 percent slopes.............................406723Thurman fine
sand, 0 to 2 percent
slopes.......................................416724Thurman fine
sand, 2 to 6 percent
slopes.......................................426725Thurman fine
sand, 6 to 11 percent
slopes.....................................436753Nora silt loam, 2
to 6 percent
slopes...............................................446791Loretto
loam, 0 to 2 percent
slopes.................................................456792Loretto
loam, 2 to 6 percent
slopes.................................................469999Water...............................................................................................47
Soil Information for All
Uses...............................................................................48Suitabilities
and Limitations for
Use....................................................................48
4
-
Building Site
Development..............................................................................48Corrosion
of
Steel........................................................................................48
Soil
Reports........................................................................................................53Soil
Chemical
Properties.................................................................................53
Chemical Soil
Properties.............................................................................53Soil
Physical
Properties..................................................................................63
Physical Soil
Properties...............................................................................63Engineering
Properties................................................................................77
References............................................................................................................93
Custom Soil Resource Report
5
-
How Soil Surveys Are MadeSoil surveys are made to provide
information about the soils and miscellaneous areasin a specific
area. They include a description of the soils and miscellaneous
areas andtheir location on the landscape and tables that show soil
properties and limitationsaffecting various uses. Soil scientists
observed the steepness, length, and shape ofthe slopes; the general
pattern of drainage; the kinds of crops and native plants; andthe
kinds of bedrock. They observed and described many soil profiles. A
soil profile isthe sequence of natural layers, or horizons, in a
soil. The profile extends from thesurface down into the
unconsolidated material in which the soil formed or from thesurface
down to bedrock. The unconsolidated material is devoid of roots and
otherliving organisms and has not been changed by other biological
activity.Currently, soils are mapped according to the boundaries of
major land resource areas(MLRAs). MLRAs are geographically
associated land resource units that sharecommon characteristics
related to physiography, geology, climate, water resources,soils,
biological resources, and land uses (USDA, 2006). Soil survey areas
typicallyconsist of parts of one or more MLRA.The soils and
miscellaneous areas in a survey area occur in an orderly pattern
that isrelated to the geology, landforms, relief, climate, and
natural vegetation of the area.Each kind of soil and miscellaneous
area is associated with a particular kind oflandform or with a
segment of the landform. By observing the soils and
miscellaneousareas in the survey area and relating their position
to specific segments of thelandform, a soil scientist develops a
concept, or model, of how they were formed. Thus,during mapping,
this model enables the soil scientist to predict with a
considerabledegree of accuracy the kind of soil or miscellaneous
area at a specific location on thelandscape.Commonly, individual
soils on the landscape merge into one another as
theircharacteristics gradually change. To construct an accurate
soil map, however, soilscientists must determine the boundaries
between the soils. They can observe onlya limited number of soil
profiles. Nevertheless, these observations, supplemented byan
understanding of the soil-vegetation-landscape relationship, are
sufficient to verifypredictions of the kinds of soil in an area and
to determine the boundaries.Soil scientists recorded the
characteristics of the soil profiles that they studied. Theynoted
soil color, texture, size and shape of soil aggregates, kind and
amount of rockfragments, distribution of plant roots, reaction, and
other features that enable them toidentify soils. After describing
the soils in the survey area and determining theirproperties, the
soil scientists assigned the soils to taxonomic classes
(units).Taxonomic classes are concepts. Each taxonomic class has a
set of soilcharacteristics with precisely defined limits. The
classes are used as a basis forcomparison to classify soils
systematically. Soil taxonomy, the system of
taxonomicclassification used in the United States, is based mainly
on the kind and character ofsoil properties and the arrangement of
horizons within the profile. After the soilscientists classified
and named the soils in the survey area, they compared the
6
-
individual soils with similar soils in the same taxonomic class
in other areas so thatthey could confirm data and assemble
additional data based on experience andresearch.The objective of
soil mapping is not to delineate pure map unit components;
theobjective is to separate the landscape into landforms or
landform segments that havesimilar use and management requirements.
Each map unit is defined by a uniquecombination of soil components
and/or miscellaneous areas in predictableproportions. Some
components may be highly contrasting to the other components ofthe
map unit. The presence of minor components in a map unit in no way
diminishesthe usefulness or accuracy of the data. The delineation
of such landforms andlandform segments on the map provides
sufficient information for the development ofresource plans. If
intensive use of small areas is planned, onsite investigation
isneeded to define and locate the soils and miscellaneous
areas.Soil scientists make many field observations in the process
of producing a soil map.The frequency of observation is dependent
upon several factors, including scale ofmapping, intensity of
mapping, design of map units, complexity of the landscape,
andexperience of the soil scientist. Observations are made to test
and refine the soil-landscape model and predictions and to verify
the classification of the soils at specificlocations. Once the
soil-landscape model is refined, a significantly smaller number
ofmeasurements of individual soil properties are made and recorded.
Thesemeasurements may include field measurements, such as those for
color, depth tobedrock, and texture, and laboratory measurements,
such as those for content ofsand, silt, clay, salt, and other
components. Properties of each soil typically vary fromone point to
another across the landscape.Observations for map unit components
are aggregated to develop ranges ofcharacteristics for the
components. The aggregated values are presented. Directmeasurements
do not exist for every property presented for every map
unitcomponent. Values for some properties are estimated from
combinations of otherproperties.While a soil survey is in progress,
samples of some of the soils in the area generallyare collected for
laboratory analyses and for engineering tests. Soil scientists
interpretthe data from these analyses and tests as well as the
field-observed characteristicsand the soil properties to determine
the expected behavior of the soils under differentuses.
Interpretations for all of the soils are field tested through
observation of the soilsin different uses and under different
levels of management. Some interpretations aremodified to fit local
conditions, and some new interpretations are developed to meetlocal
needs. Data are assembled from other sources, such as research
information,production records, and field experience of
specialists. For example, data on cropyields under defined levels
of management are assembled from farm records and fromfield or plot
experiments on the same kinds of soil.Predictions about soil
behavior are based not only on soil properties but also on
suchvariables as climate and biological activity. Soil conditions
are predictable over longperiods of time, but they are not
predictable from year to year. For example, soilscientists can
predict with a fairly high degree of accuracy that a given soil
will havea high water table within certain depths in most years,
but they cannot predict that ahigh water table will always be at a
specific level in the soil on a specific date.After soil scientists
located and identified the significant natural bodies of soil in
thesurvey area, they drew the boundaries of these bodies on aerial
photographs andidentified each as a specific map unit. Aerial
photographs show trees, buildings, fields,roads, and rivers, all of
which help in locating boundaries accurately.
Custom Soil Resource Report
7
-
Soil MapThe soil map section includes the soil map for the
defined area of interest, a list of soilmap units on the map and
extent of each map unit, and cartographic symbolsdisplayed on the
map. Also presented are various metadata about data used toproduce
the map, and a description of each soil map unit.
8
-
T27N R7W
T27N R6W
3 2 1
9
4
11
26
22
12
27
23
15
10
14 13
24
2528
21
16
36353433
6
20
6723
6723
6636
6723
6724
6723
6724 6636 6724
6700
6636
6724
6723
6636
6723
6636
6723
6723
6723
3280
6320
6723
6700
6636
6636
6723
6700
6636
6636
3163
6724
67236723
6723
6723
3286
6791
6753
6635
6792
328667
23
3286
4178
328667
23
3286
6700
6636
6636
6636
3286
6724
4178
6636
4786
4786
3255
4178
6636
6636
6724
6636
6636
6636
4876
6636
47866724
6725
4786 6725
6723
6636
3280
6660
32866725
6578
6791
6791
6636
3280
6723
6723
6724
4807
4786
4878
6725
6700
3280
4786
6636
6700
6723
6637
67003255
3164
6724
4179
6700
6636
6700
6636
6636
6636
3165
6636
6636
3164
6723
6700
4179
6791
6703
4179
6636
6723
4786
4240
6700
6792
6753
4786
6723
6700
3286
6753
3164
6723
3164
3268
4786
6724 6700
4178
4178
6724
6724
6753
6792
6725
6637
6700
6723
3280
3268
4786
6636
6791
6791
4178
6791
6725
6700
6724
3281
4786
6792
6791
6791
6637
6636
6723
4786
4878
3163
4786
6636
4786
4786
6723
3164
3280
6637
6635
6636
4878
4879
3163
4879
4179
6723
3164
6723
3165
4179 6723
3163
6723
6700
6636
6791
6723
3252
4178
6792
3286
6725
6753
3163
4786
3164
6791
3286
6723
3164
23306700
3285
3286
6636
3286
3164
6636
6700
41786753
4878 6700
3164
3164
4179
3268
6791
6636
6636
4786
4786
3164
4179
6791
2330
6700
6637
3164
6703
6791
6791
6700
6723
4878
3164
6636
9999
4786
3268
6723
3163
4879
4786
6753
4878
6723
2330
4179
3281
6724
6724
6724
6792
6636 4786
6724
6636
6724 3163
6792
6724
41796791
6724
4178
571000
571000
572000
572000
573000
573000
574000
574000
575000
575000
576000
576000
4681
000
4681
000
4682
000
4682
000
4683
000
4683
000
4684
000
4684
000
4685
000
4685
000
4686
000
4686
000
4687
000
4687
000
4688
000
4688
000
0 3,000 6,000 9,0001,500Feet
0 700 1,400 2,100350Meters
42 20' 52''
98 4
' 3''
42 16' 27''
98 4
' 7''
42 16' 29''
42 20' 54''98
8' 3
2''98
8' 2
8''
Map Scale: 1:39,000 if printed on A size (8.5" x 11") sheet.
Custom Soil Resource ReportSoil Map
-
MAP LEGEND MAP INFORMATIONArea of Interest (AOI)
Area of Interest (AOI)Soils
Soil Map UnitsSpecial Line Features
GullyShort Steep SlopeOther
Political FeaturesCitiesPLSS Township andRangePLSS Section
Water FeaturesStreams and Canals
TransportationRailsInterstate HighwaysUS RoutesMajor Roads
Map Scale: 1:39,000 if printed on A size (8.5" 11") sheet.
The soil surveys that comprise your AOI were mapped at
1:20,000.
Please rely on the bar scale on each map sheet for accurate
mapmeasurements.
Source of Map: Natural Resources Conservation ServiceWeb Soil
Survey URL: http://websoilsurvey.nrcs.usda.govCoordinate System:
UTM Zone 14N NAD83
This product is generated from the USDA-NRCS certified data as
ofthe version date(s) listed below.
Soil Survey Area: Antelope County, NebraskaSurvey Area Data:
Version 9, Jul 27, 2012
Date(s) aerial images were photographed: 7/29/2006
The orthophoto or other base map on which the soil lines
werecompiled and digitized probably differs from the
backgroundimagery displayed on these maps. As a result, some minor
shiftingof map unit boundaries may be evident.
Custom Soil Resource Report
-
Map Unit LegendAntelope County, Nebraska (NE003)
Map Unit Symbol Map Unit Name Acres in AOI Percent of AOI2330
Inavale fine sand, rarely flooded 13.7 0.2%3163 Doger fine sand, 0
to 6 percent slopes 63.9 0.8%3164 Doger loamy fine sand, 0 to 2
percent
slopes123.8 1.5%
3165 Doger loamy fine sand, 2 to 6 percentslopes
24.9 0.3%
3252 Meadin sandy loam, 0 to 2 percent slopes 7.8 0.1%3255
Meadin sandy loam, 2 to 30 percent
slopes61.3 0.8%
3268 O'Neill sandy loam, 2 to 6 percent slopes 33.8 0.4%3280
Paka complex, 0 to 2 percent slopes 153.9 1.9%3281 Paka complex, 2
to 6 percent slopes 12.3 0.2%3285 Paka loam, 0 to 2 percent slopes
6.6 0.1%3286 Paka loam, 2 to 6 percent slopes 215.4 2.7%4178
Longford complex, 1 to 7 percent slopes 157.9 2.0%4179 Longford
loam, 1 to 7 percent slopes 77.5 1.0%4240 Ord fine sandy loam,
rarely flooded 14.5 0.2%4786 Valentine fine sand, 0 to 6 percent
slopes 320.4 4.0%4807 Valentine fine sand, rolling 20.5 0.3%4876
Valentine-Simeon complex, 0 to 3
percent slopes35.3 0.4%
4878 Valentine-Simeon complex, 3 to 6percent slopes
51.3 0.6%
4879 Valentine-Simeon complex, 6 to 11percent slopes
20.3 0.3%
6320 Barney-Boel-Calamus complex,channeled
54.7 0.7%
6578 Ortello fine sandy loam, 0 to 1 percentslopes
24.0 0.3%
6635 Boelus fine sand, 0 to 6 percent slopes 30.4 0.4%6636
Boelus loamy fine sand, 0 to 3 percent
slopes1,652.2 20.6%
6637 Boelus loamy fine sand, 2 to 6 percentslopes
54.3 0.7%
6660 Brunswick-Paka complex, 11 to 30percent slopes
26.3 0.3%
6700 Thurman loamy fine sand, 0 to 2 percentslopes
397.2 5.0%
6703 Thurman loamy fine sand, 2 to 6 percentslopes
19.6 0.2%
Custom Soil Resource Report
11
-
Antelope County, Nebraska (NE003)Map Unit Symbol Map Unit Name
Acres in AOI Percent of AOI
6723 Thurman fine sand, 0 to 2 percent slopes 2,868.9 35.8%6724
Thurman fine sand, 2 to 6 percent slopes 1,004.9 12.6%6725 Thurman
fine sand, 6 to 11 percent
slopes132.8 1.7%
6753 Nora silt loam, 2 to 6 percent slopes 77.6 1.0%6791 Loretto
loam, 0 to 2 percent slopes 176.3 2.2%6792 Loretto loam, 2 to 6
percent slopes 67.4 0.8%9999 Water 3.8 0.0%Totals for Area of
Interest 8,005.3 100.0%
Map Unit DescriptionsThe map units delineated on the detailed
soil maps in a soil survey represent the soilsor miscellaneous
areas in the survey area. The map unit descriptions, along with
themaps, can be used to determine the composition and properties of
a unit.A map unit delineation on a soil map represents an area
dominated by one or moremajor kinds of soil or miscellaneous areas.
A map unit is identified and namedaccording to the taxonomic
classification of the dominant soils. Within a taxonomicclass there
are precisely defined limits for the properties of the soils. On
the landscape,however, the soils are natural phenomena, and they
have the characteristic variabilityof all natural phenomena. Thus,
the range of some observed properties may extendbeyond the limits
defined for a taxonomic class. Areas of soils of a single
taxonomicclass rarely, if ever, can be mapped without including
areas of other taxonomicclasses. Consequently, every map unit is
made up of the soils or miscellaneous areasfor which it is named
and some minor components that belong to taxonomic classesother
than those of the major soils.Most minor soils have properties
similar to those of the dominant soil or soils in themap unit, and
thus they do not affect use and management. These are
callednoncontrasting, or similar, components. They may or may not
be mentioned in aparticular map unit description. Other minor
components, however, have propertiesand behavioral characteristics
divergent enough to affect use or to require differentmanagement.
These are called contrasting, or dissimilar, components. They
generallyare in small areas and could not be mapped separately
because of the scale used.Some small areas of strongly contrasting
soils or miscellaneous areas are identifiedby a special symbol on
the maps. If included in the database for a given area,
thecontrasting minor components are identified in the map unit
descriptions along withsome characteristics of each. A few areas of
minor components may not have beenobserved, and consequently they
are not mentioned in the descriptions, especiallywhere the pattern
was so complex that it was impractical to make enough
observationsto identify all the soils and miscellaneous areas on
the landscape.The presence of minor components in a map unit in no
way diminishes the usefulnessor accuracy of the data. The objective
of mapping is not to delineate pure taxonomicclasses but rather to
separate the landscape into landforms or landform segments thathave
similar use and management requirements. The delineation of such
segmentson the map provides sufficient information for the
development of resource plans. If
Custom Soil Resource Report
12
-
intensive use of small areas is planned, however, onsite
investigation is needed todefine and locate the soils and
miscellaneous areas.An identifying symbol precedes the map unit
name in the map unit descriptions. Eachdescription includes general
facts about the unit and gives important soil propertiesand
qualities.Soils that have profiles that are almost alike make up a
soil series. Except fordifferences in texture of the surface layer,
all the soils of a series have major horizonsthat are similar in
composition, thickness, and arrangement.Soils of one series can
differ in texture of the surface layer, slope, stoniness,
salinity,degree of erosion, and other characteristics that affect
their use. On the basis of suchdifferences, a soil series is
divided into soil phases. Most of the areas shown on thedetailed
soil maps are phases of soil series. The name of a soil phase
commonlyindicates a feature that affects use or management. For
example, Alpha silt loam, 0to 2 percent slopes, is a phase of the
Alpha series.Some map units are made up of two or more major soils
or miscellaneous areas.These map units are complexes, associations,
or undifferentiated groups.A complex consists of two or more soils
or miscellaneous areas in such an intricatepattern or in such small
areas that they cannot be shown separately on the maps. Thepattern
and proportion of the soils or miscellaneous areas are somewhat
similar in allareas. Alpha-Beta complex, 0 to 6 percent slopes, is
an example.An association is made up of two or more geographically
associated soils ormiscellaneous areas that are shown as one unit
on the maps. Because of present oranticipated uses of the map units
in the survey area, it was not considered practicalor necessary to
map the soils or miscellaneous areas separately. The pattern
andrelative proportion of the soils or miscellaneous areas are
somewhat similar. Alpha-Beta association, 0 to 2 percent slopes, is
an example.An undifferentiated group is made up of two or more
soils or miscellaneous areas thatcould be mapped individually but
are mapped as one unit because similarinterpretations can be made
for use and management. The pattern and proportion ofthe soils or
miscellaneous areas in a mapped area are not uniform. An area can
bemade up of only one of the major soils or miscellaneous areas, or
it can be made upof all of them. Alpha and Beta soils, 0 to 2
percent slopes, is an example.Some surveys include miscellaneous
areas. Such areas have little or no soil materialand support little
or no vegetation. Rock outcrop is an example.
Custom Soil Resource Report
13
-
Antelope County, Nebraska2330Inavale fine sand, rarely
flooded
Map Unit SettingElevation: 980 to 2,490 feetMean annual
precipitation: 18 to 29 inchesMean annual air temperature: 46 to 52
degrees FFrost-free period: 125 to 170 days
Map Unit CompositionInavale, rarely flooded, and similar soils:
95 percentMinor components: 5 percent
Description of Inavale, Rarely FloodedSetting
Landform: Flood plainsDown-slope shape: LinearAcross-slope
shape: LinearParent material: Sandy alluvium
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: RareFrequency of ponding:
NoneAvailable water capacity: Low (about 4.9 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: SANDY LOWLAND (R102CY051NE)
Typical profile0 to 7 inches: Fine sand7 to 11 inches: Fine
sand11 to 80 inches: Stratified fine sand to sand
Minor ComponentsBarney, frequently flooded
Percent of map unit: 5 percentLandform: Flood plainsDown-slope
shape: LinearAcross-slope shape: LinearEcological site: Wet
Subirrigated (R066XY045NE)
Custom Soil Resource Report
14
-
3163Doger fine sand, 0 to 6 percent slopesMap Unit Setting
Mean annual precipitation: 24 to 26 inchesMean annual air
temperature: 46 to 50 degrees FFrost-free period: 140 to 160
days
Map Unit CompositionDoger and similar soils: 100 percent
Description of DogerSetting
Landform: HillslopesLandform position (two-dimensional):
FootslopeDown-slope shape: Convex, concaveAcross-slope shape:
Linear
Properties and qualitiesSlope: 0 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 4.5 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R065XY055NE)Other vegetative
classification: Sands 22-25" P.Z. (065XY055NE)
Typical profile0 to 31 inches: Fine sand31 to 60 inches: Fine
sand
3164Doger loamy fine sand, 0 to 2 percent slopesMap Unit
Setting
Mean annual precipitation: 24 to 26 inchesMean annual air
temperature: 46 to 50 degrees F
Custom Soil Resource Report
15
-
Frost-free period: 140 to 160 days
Map Unit CompositionDoger and similar soils: 100 percent
Description of DogerSetting
Landform: HillslopesLandform position (two-dimensional):
FootslopeDown-slope shape: Convex, concaveAcross-slope shape:
Linear
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.4 inches)
Interpretive groupsFarmland classification: Farmland of
statewide importanceLand capability classification (irrigated):
3eLand capability (nonirrigated): 3eHydrologic Soil Group:
AEcological site: Sandy 22-25 P.Z. (R065XY054NE)Other vegetative
classification: Sandy 22-25" P.Z. (065XY054NE)
Typical profile0 to 31 inches: Loamy fine sand31 to 60 inches:
Fine sand
3165Doger loamy fine sand, 2 to 6 percent slopesMap Unit
Setting
Mean annual precipitation: 24 to 26 inchesMean annual air
temperature: 46 to 50 degrees FFrost-free period: 140 to 160
days
Map Unit CompositionDoger and similar soils: 100 percent
Description of DogerSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, footslopeDown-slope shape: Convex, concaveAcross-slope
shape: Linear
Custom Soil Resource Report
16
-
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.4 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: Sandy 22-25 P.Z. (R065XY054NE)Other vegetative
classification: Sandy 22-25" P.Z. (065XY054NE)
Typical profile0 to 31 inches: Loamy fine sand31 to 60 inches:
Fine sand
3252Meadin sandy loam, 0 to 2 percent slopesMap Unit Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionMeadin and similar soils: 100 percent
Description of MeadinSetting
Landform: KnollsDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Loamy alluvium over sandy and gravelly
alluvium
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High (1.98 to 5.95 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.3 inches)
Custom Soil Resource Report
17
-
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4sLand
capability (nonirrigated): 4sHydrologic Soil Group: AEcological
site: Shallow to Gravel (R066XY062NE)
Typical profile0 to 6 inches: Sandy loam6 to 10 inches: Very
gravelly loamy sand10 to 60 inches: Gravelly sand
3255Meadin sandy loam, 2 to 30 percent slopesMap Unit
Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionMeadin and similar soils: 100 percent
Description of MeadinSetting
Landform: HillslopesDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Loamy alluvium
over sandy and gravelly alluvium
Properties and qualitiesSlope: 3 to 30 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High (1.98 to 5.95 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.3 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6sHydrologic Soil Group:
AEcological site: Shallow to Gravel (R066XY062NE)
Typical profile0 to 6 inches: Sandy loam6 to 10 inches: Very
gravelly loamy sand10 to 60 inches: Gravelly sand
Custom Soil Resource Report
18
-
3268O'Neill sandy loam, 2 to 6 percent slopesMap Unit
Setting
Elevation: 2,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionO'neill and similar soils: 100 percent
Description of O'neillSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Coarse-loamy
alluvium over sandy and gravelly alluvium
Properties and qualitiesSlope: 2 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): High (2.00 to 5.95 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 4.3 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: Sandy 22-25 P.Z. (R066XY054NE)
Typical profile0 to 8 inches: Sandy loam8 to 25 inches: Sandy
loam25 to 60 inches: Gravelly sand
3280Paka complex, 0 to 2 percent slopesMap Unit Setting
Elevation: 1,500 to 2,500 feetMean annual precipitation: 24 to
26 inches
Custom Soil Resource Report
19
-
Mean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionPaka and similar soils: 100 percent
Description of PakaSetting
Landform: KnollsDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Loamy residuum weathered from siltstone
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: 40 to 60 inches to paralithic bedrockDrainage
class: Well drainedCapacity of the most limiting layer to transmit
water (Ksat): Moderately low (0.01 to
0.14 in/hr)Depth to water table: More than 80 inchesFrequency of
flooding: NoneFrequency of ponding: NoneCalcium carbonate, maximum
content: 5 percentAvailable water capacity: Moderate (about 7.5
inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 2eLand
capability (nonirrigated): 3eHydrologic Soil Group: CEcological
site: SANDY (R102CY054NE)
Typical profile0 to 17 inches: Loamy fine sand17 to 47 inches:
Clay loam47 to 60 inches: Weathered bedrock
3281Paka complex, 2 to 6 percent slopesMap Unit Setting
Elevation: 1,500 to 2,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionPaka and similar soils: 100 percent
Description of PakaSetting
Landform: Hillslopes
Custom Soil Resource Report
20
-
Landform position (two-dimensional): Backslope, shoulder,
summitDown-slope shape: Convex, concaveAcross-slope shape:
LinearParent material: Loamy residuum weathered from siltstone
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: 40 to 60 inches to paralithic bedrockDrainage
class: Well drainedCapacity of the most limiting layer to transmit
water (Ksat): Moderately low (0.01 to
0.14 in/hr)Depth to water table: More than 80 inchesFrequency of
flooding: NoneFrequency of ponding: NoneCalcium carbonate, maximum
content: 5 percentAvailable water capacity: Moderate (about 7.5
inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 3eLand
capability (nonirrigated): 3eHydrologic Soil Group: CEcological
site: SANDY (R102CY054NE)
Typical profile0 to 17 inches: Loamy fine sand17 to 47 inches:
Clay loam47 to 60 inches: Weathered bedrock
3285Paka loam, 0 to 2 percent slopesMap Unit Setting
Elevation: 1,500 to 2,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionPaka and similar soils: 100 percent
Description of PakaSetting
Landform: FlatsDown-slope shape: LinearAcross-slope shape:
LinearParent material: Loamy residuum weathered from siltstone
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: 40 to 60 inches to paralithic bedrockDrainage
class: Well drained
Custom Soil Resource Report
21
-
Capacity of the most limiting layer to transmit water (Ksat):
Moderately low (0.01 to0.14 in/hr)
Depth to water table: More than 80 inchesFrequency of flooding:
NoneFrequency of ponding: NoneCalcium carbonate, maximum content: 5
percentAvailable water capacity: High (about 9.3 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 1Land
capability (nonirrigated): 1Hydrologic Soil Group: CEcological
site: Loamy 18-22 P.Z. (R066XY036NE)Other vegetative
classification: Silty - Veg. zone 3 (066XY058NE)
Typical profile0 to 10 inches: Loam10 to 35 inches: Clay loam35
to 47 inches: Loam47 to 60 inches: Weathered bedrock
3286Paka loam, 2 to 6 percent slopesMap Unit Setting
Elevation: 1,500 to 2,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionPaka and similar soils: 100 percent
Description of PakaSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Loamy residuum
weathered from siltstone
Properties and qualitiesSlope: 2 to 6 percentDepth to
restrictive feature: 40 to 60 inches to paralithic bedrockDrainage
class: Well drainedCapacity of the most limiting layer to transmit
water (Ksat): Moderately low (0.01 to
0.14 in/hr)Depth to water table: More than 80 inchesFrequency of
flooding: NoneFrequency of ponding: NoneCalcium carbonate, maximum
content: 5 percent
Custom Soil Resource Report
22
-
Available water capacity: High (about 9.3 inches)Interpretive
groups
Farmland classification: All areas are prime farmlandLand
capability classification (irrigated): 3eLand capability
(nonirrigated): 2eHydrologic Soil Group: CEcological site: Loamy
18-22 P.Z. (R066XY036NE)Other vegetative classification: Silty -
Veg. zone 3 (066XY058NE)
Typical profile0 to 7 inches: Loam7 to 35 inches: Clay loam35 to
47 inches: Loam47 to 60 inches: Weathered bedrock
4178Longford complex, 1 to 7 percent slopesMap Unit Setting
Elevation: 1,500 to 2,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionLongford and similar soils: 100 percent
Description of LongfordSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Loess
Properties and qualitiesSlope: 1 to 4 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Low to moderately high
(0.01 to 0.20 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 5 percentAvailable water capacity:
Moderate (about 8.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: C
Custom Soil Resource Report
23
-
Typical profile0 to 18 inches: Loamy fine sand18 to 34 inches:
Silty clay34 to 41 inches: Silty clay loam41 to 60 inches: Silt
loam
4179Longford loam, 1 to 7 percent slopesMap Unit Setting
Elevation: 1,000 to 2,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionLongford and similar soils: 100 percent
Description of LongfordSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Loess
Properties and qualitiesSlope: 1 to 4 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Low to moderately high
(0.01 to 0.20 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 5 percentAvailable water capacity: High
(about 10.8 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 3eLand
capability (nonirrigated): 3eHydrologic Soil Group: CEcological
site: CLAYEY (R102CY057NE)
Typical profile0 to 11 inches: Loam11 to 41 inches: Silty clay41
to 60 inches: Silt loam
Custom Soil Resource Report
24
-
4240Ord fine sandy loam, rarely floodedMap Unit Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionOrd, rarely flooded, and similar soils: 98
percentMinor components: 2 percent
Description of Ord, Rarely FloodedSetting
Landform: Flood plainsDown-slope shape: LinearAcross-slope
shape: LinearParent material: Stratified sandy alluvium
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
poorly drainedCapacity of the most limiting layer to transmit water
(Ksat): High (2.00 to 6.00 in/hr)Depth to water table: About 18 to
36 inchesFrequency of flooding: RareFrequency of ponding:
NoneCalcium carbonate, maximum content: 40 percentMaximum salinity:
Nonsaline (0.0 to 2.0 mmhos/cm)Sodium adsorption ratio, maximum:
5.0Available water capacity: Low (about 4.9 inches)
Interpretive groupsFarmland classification: Prime farmland if
drainedLand capability classification (irrigated): 2wLand
capability (nonirrigated): 2wHydrologic Soil Group: BEcological
site: SUBIRRIGATED (R102CY046NE)
Typical profile0 to 10 inches: Fine sandy loam10 to 21 inches:
Fine sandy loam21 to 60 inches: Fine sand
Minor ComponentsOrwet
Percent of map unit: 2 percentLandform: Flood plainsDown-slope
shape: LinearAcross-slope shape: Linear
Custom Soil Resource Report
25
-
Ecological site: WET SUBIRRIGATED (R102CY045NE)
4786Valentine fine sand, 0 to 6 percent slopesMap Unit
Setting
Elevation: 1,500 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionValentine and similar soils: 98 percentMinor
components: 2 percent
Description of ValentineSetting
Landform: Dunes, ridgesDown-slope shape: ConvexAcross-slope
shape: Convex, linearParent material: Eolian sands
Properties and qualitiesSlope: 0 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R065XY055NE)Other vegetative
classification: Sands 22-25" P.Z. (065XY055NE)
Typical profile0 to 5 inches: Fine sand5 to 60 inches: Fine
sand
Minor ComponentsLoup, frequently ponded
Percent of map unit: 2 percentLandform: SwalesDown-slope shape:
Concave
Custom Soil Resource Report
26
-
Across-slope shape: LinearOther vegetative classification: Wet
Land - Veg. zone 3 (102BY044NE)
4807Valentine fine sand, rollingMap Unit Setting
Elevation: 1,500 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionValentine and similar soils: 98 percentMinor
components: 2 percent
Description of ValentineSetting
Landform: DunesDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Eolian sands
Properties and qualitiesSlope: 6 to 15 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6eHydrologic Soil Group:
AEcological site: Sands 22-25 P.Z. (R065XY055NE)Other vegetative
classification: Sands 22-25" P.Z. (065XY055NE)
Typical profile0 to 5 inches: Fine sand5 to 60 inches: Fine
sand
Minor ComponentsLoup, frequently ponded
Percent of map unit: 2 percentLandform: SwalesDown-slope shape:
Concave
Custom Soil Resource Report
27
-
Across-slope shape: LinearOther vegetative classification: Wet
Land - Veg. zone 3 (102BY044NE)
4876Valentine-Simeon complex, 0 to 3 percent slopesMap Unit
Setting
Elevation: 1,500 to 3,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionValentine and similar soils: 65
percentSimeon and similar soils: 35 percent
Description of ValentineSetting
Landform: HummocksDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Eolian sands
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: Sandy 22-25 P.Z. (R066XY054NE)
Typical profile0 to 5 inches: Fine sand5 to 60 inches: Fine
sand
Description of SimeonSetting
Landform: FlatsDown-slope shape: LinearAcross-slope shape:
Linear
Custom Soil Resource Report
28
-
Parent material: Sandy and gravelly alluviumProperties and
qualities
Slope: 0 to 3 percentDepth to restrictive feature: More than 80
inchesDrainage class: Excessively drainedCapacity of the most
limiting layer to transmit water (Ksat): High to very high
(5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.0 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R066XY055NE)
Typical profile0 to 7 inches: Loamy sand7 to 60 inches: Sand
4878Valentine-Simeon complex, 3 to 6 percent slopesMap Unit
Setting
Elevation: 1,500 to 3,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionValentine and similar soils: 60
percentSimeon and similar soils: 40 percent
Description of ValentineSetting
Landform: Ridges, hillslopesLandform position (two-dimensional):
BackslopeDown-slope shape: Convex, concaveAcross-slope shape:
LinearParent material: Eolian sands
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)
Custom Soil Resource Report
29
-
Depth to water table: More than 80 inchesFrequency of flooding:
NoneFrequency of ponding: NoneAvailable water capacity: Low (about
3.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R066XY055NE)
Typical profile0 to 5 inches: Fine sand5 to 60 inches: Fine
sand
Description of SimeonSetting
Landform: HillslopesDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Sandy and
gravelly alluvium
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.0 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R066XY055NE)
Typical profile0 to 7 inches: Loamy sand7 to 60 inches: Sand
4879Valentine-Simeon complex, 6 to 11 percent slopesMap Unit
Setting
Elevation: 1,500 to 3,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees F
Custom Soil Resource Report
30
-
Frost-free period: 140 to 160 days
Map Unit CompositionValentine and similar soils: 55
percentSimeon and similar soils: 45 percent
Description of ValentineSetting
Landform: Ridges, hillslopesLandform position (two-dimensional):
BackslopeDown-slope shape: Convex, concaveAcross-slope shape:
LinearParent material: Eolian sands
Properties and qualitiesSlope: 6 to 11 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 3.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: Sands 22-25 P.Z. (R066XY055NE)
Typical profile0 to 5 inches: Fine sand5 to 60 inches: Fine
sand
Description of SimeonSetting
Landform: HillslopesLandform position (two-dimensional):
Shoulder, summitDown-slope shape: Convex, concaveAcross-slope
shape: LinearParent material: Sandy and gravelly alluvium
Properties and qualitiesSlope: 6 to 11 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Excessively
drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.0 inches)
Custom Soil Resource Report
31
-
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6sHydrologic Soil Group:
AEcological site: Sands 22-25 P.Z. (R066XY055NE)
Typical profile0 to 7 inches: Loamy sand7 to 60 inches: Sand
6320Barney-Boel-Calamus complex, channeledMap Unit Setting
Elevation: 1,310 to 2,490 feetMean annual precipitation: 18 to
25 inchesMean annual air temperature: 46 to 52 degrees FFrost-free
period: 125 to 150 days
Map Unit CompositionBarney, channeled, frequently flooded, and
similar soils: 50 percentBoel, channeled, occasionally flooded, and
similar soils: 18 percentCalamus and similar soils: 17 percentMinor
components: 15 percent
Description of Barney, Channeled, Frequently FloodedSetting
Landform: Flood plainsDown-slope shape: LinearAcross-slope
shape: LinearParent material: Loamy alluvium over sandy and
gravelly alluvium
Properties and qualitiesSlope: 0 to 1 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Poorly
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.60 to 2.00 in/hr)Depth to water table: About 0 to 18
inchesFrequency of flooding: FrequentFrequency of ponding:
NoneCalcium carbonate, maximum content: 5 percentAvailable water
capacity: Low (about 4.5 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6wHydrologic Soil Group:
B/DEcological site: Wet Subirrigated (R066XY045NE)
Custom Soil Resource Report
32
-
Typical profile0 to 7 inches: Loam7 to 18 inches: Stratified
fine sand to loamy fine sand18 to 80 inches: Sand
Description of Boel, Channeled, Occasionally FloodedSetting
Landform: Flood plainsDown-slope shape: LinearAcross-slope
shape: LinearParent material: Sandy alluvium
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
poorly drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: About 18 to 36
inchesFrequency of flooding: OccasionalFrequency of ponding:
NoneCalcium carbonate, maximum content: 5 percentAvailable water
capacity: Low (about 3.6 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6wHydrologic Soil Group:
AEcological site: Subirrigated (R065XY024NE)Other vegetative
classification: Subirrigated - Veg. zone 4 (106XY066NE_3)
Typical profile0 to 7 inches: Loamy sand7 to 10 inches: Loamy
sand10 to 80 inches: Stratified sand to sandy loam to loamy
sand
Description of CalamusSetting
Landform: Flood plainsDown-slope shape: LinearAcross-slope
shape: LinearParent material: Sandy alluvium
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Moderately
well drainedCapacity of the most limiting layer to transmit water
(Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: About 36 to 60
inchesFrequency of flooding: RareFrequency of ponding:
NoneAvailable water capacity: Low (about 4.1 inches)
Custom Soil Resource Report
33
-
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6eHydrologic Soil Group:
AEcological site: Sandy Lowland (R066XY051NE)Other vegetative
classification: Sandy 22-25" P.Z. (065XY054NE_2)
Typical profile0 to 4 inches: Sand4 to 6 inches: Sand6 to 48
inches: Stratified sand to sandy loam to loamy sand48 to 80 inches:
Stratified sand to sandy loam to loamy sand
Minor ComponentsFluvaquents, sandy, frequently flooded
Percent of map unit: 11 percentLandform: Flood plainsDown-slope
shape: LinearAcross-slope shape: Linear
Blackloup, wetPercent of map unit: 3 percentLandform: Flood
plainsDown-slope shape: LinearAcross-slope shape: LinearEcological
site: Wet Subirrigated (R066XY045NE)
InavalePercent of map unit: 1 percentLandform: Flood
plainsDown-slope shape: LinearAcross-slope shape: LinearEcological
site: Sandy Lowland (R066XY051NE)Other vegetative classification:
Sandy Lowland 22-25" P.Z. (065XY051NE_2)
6578Ortello fine sandy loam, 0 to 1 percent slopesMap Unit
Setting
Elevation: 1,500 to 2,500 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionOrtello and similar soils: 100 percent
Custom Soil Resource Report
34
-
Description of OrtelloSetting
Landform: FlatsDown-slope shape: LinearAcross-slope shape:
LinearParent material: Sandy eolian deposits
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): High (2.00 to 6.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Moderate (about 7.2 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 2eLand
capability (nonirrigated): 2eHydrologic Soil Group: AEcological
site: SANDY (R102CY054NE)
Typical profile0 to 14 inches: Fine sandy loam14 to 32 inches:
Fine sandy loam32 to 60 inches: Loamy fine sand
6635Boelus fine sand, 0 to 6 percent slopesMap Unit Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionBoelus and similar soils: 100 percent
Description of BoelusSetting
Landform: HillslopesDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Eolian sands over
silty eolian deposits
Properties and qualitiesSlope: 0 to 6 percentDepth to
restrictive feature: More than 80 inches
Custom Soil Resource Report
35
-
Drainage class: Well drainedCapacity of the most limiting layer
to transmit water (Ksat): Moderately high to high
(0.60 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 5 percentAvailable water capacity:
Moderate (about 9.0 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: BEcological
site: SANDY (R102CY054NE)
Typical profile0 to 10 inches: Fine sand10 to 29 inches: Loamy
fine sand29 to 48 inches: Silt loam48 to 60 inches: Silt loam
6636Boelus loamy fine sand, 0 to 3 percent slopesMap Unit
Setting
Elevation: 800 to 5,500 feetMean annual precipitation: 24 to 26
inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionBoelus and similar soils: 99 percentMinor
components: 1 percent
Description of BoelusSetting
Landform: KnollsDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Eolian sands over silty eolian deposits
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.60 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 5 percent
Custom Soil Resource Report
36
-
Available water capacity: High (about 9.2 inches)Interpretive
groups
Farmland classification: Farmland of statewide importanceLand
capability classification (irrigated): 3eLand capability
(nonirrigated): 3eHydrologic Soil Group: BEcological site: SANDY
(R102CY054NE)
Typical profile0 to 10 inches: Loamy fine sand10 to 29 inches:
Loamy fine sand29 to 48 inches: Silt loam48 to 60 inches: Silt
loam
Minor ComponentsPonded soils
Percent of map unit: 1 percentLandform: DepressionsDown-slope
shape: ConcaveAcross-slope shape: Concave
6637Boelus loamy fine sand, 2 to 6 percent slopesMap Unit
Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionBoelus and similar soils: 100 percent
Description of BoelusSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Eolian sands over
silty eolian deposits
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.60 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: None
Custom Soil Resource Report
37
-
Frequency of ponding: NoneCalcium carbonate, maximum content: 5
percentAvailable water capacity: High (about 9.2 inches)
Interpretive groupsFarmland classification: Farmland of
statewide importanceLand capability classification (irrigated):
3eLand capability (nonirrigated): 3eHydrologic Soil Group:
BEcological site: SANDY (R102CY054NE)
Typical profile0 to 10 inches: Loamy fine sand10 to 29 inches:
Loamy fine sand29 to 48 inches: Silt loam48 to 60 inches: Silt
loam
6660Brunswick-Paka complex, 11 to 30 percent slopesMap Unit
Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionBrunswick and similar soils: 65 percentPaka
and similar soils: 35 percent
Description of BrunswickSetting
Landform: HillslopesLandform position (two-dimensional):
BackslopeDown-slope shape: Convex, concaveAcross-slope shape:
LinearParent material: Residuum weathered from sandstone
Properties and qualitiesSlope: 11 to 30 percentDepth to
restrictive feature: 20 to 40 inches to paralithic bedrockDrainage
class: Well drainedCapacity of the most limiting layer to transmit
water (Ksat): Moderately high to high
(1.42 to 6.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Very low (about 2.7 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6eHydrologic Soil Group:
B
Custom Soil Resource Report
38
-
Ecological site: Sandy 22-25 P.Z. (R066XY054NE)Typical
profile
0 to 4 inches: Fine sandy loam4 to 17 inches: Fine sandy loam17
to 23 inches: Loamy fine sand23 to 60 inches: Weathered bedrock
Description of PakaSetting
Landform: HillslopesLandform position (two-dimensional):
Shoulder, summitDown-slope shape: Convex, concaveAcross-slope
shape: LinearParent material: Loamy residuum weathered from
siltstone
Properties and qualitiesSlope: 11 to 30 percentDepth to
restrictive feature: 40 to 60 inches to paralithic bedrockDrainage
class: Well drainedCapacity of the most limiting layer to transmit
water (Ksat): Moderately low (0.01 to
0.14 in/hr)Depth to water table: More than 80 inchesFrequency of
flooding: NoneFrequency of ponding: NoneCalcium carbonate, maximum
content: 5 percentAvailable water capacity: Moderate (about 8.4
inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability (nonirrigated): 6eHydrologic Soil Group:
CEcological site: Loamy 18-22 P.Z. (R066XY036NE)Other vegetative
classification: Silty - Veg. zone 3 (066XY058NE)
Typical profile0 to 7 inches: Loam7 to 30 inches: Clay loam30 to
42 inches: Silt loam42 to 60 inches: Weathered bedrock
6700Thurman loamy fine sand, 0 to 2 percent slopesMap Unit
Setting
Elevation: 800 to 5,500 feetMean annual precipitation: 24 to 26
inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Custom Soil Resource Report
39
-
Map Unit CompositionThurman and similar soils: 99 percentMinor
components: 1 percent
Description of ThurmanSetting
Landform: HummocksDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Sandy eolian deposits
Properties and qualitiesSlope: 0 to 3 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.1 inches)
Interpretive groupsFarmland classification: Farmland of
statewide importanceLand capability classification (irrigated):
3eLand capability (nonirrigated): 3eHydrologic Soil Group:
AEcological site: SANDY (R102CY054NE)
Typical profile0 to 16 inches: Loamy fine sand16 to 24 inches:
Loamy fine sand24 to 60 inches: Fine sand
Minor ComponentsPonded soils
Percent of map unit: 1 percentLandform: DepressionsDown-slope
shape: ConcaveAcross-slope shape: Concave
6703Thurman loamy fine sand, 2 to 6 percent slopesMap Unit
Setting
Elevation: 1,000 to 2,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Custom Soil Resource Report
40
-
Map Unit CompositionThurman and similar soils: 100 percent
Description of ThurmanSetting
Landform: DunesDown-slope shape: ConvexAcross-slope shape:
ConvexParent material: Sandy eolian deposits
Properties and qualitiesSlope: 3 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 5.1 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: SANDY (R102CY054NE)
Typical profile0 to 16 inches: Loamy fine sand16 to 24 inches:
Loamy fine sand24 to 60 inches: Fine sand
6723Thurman fine sand, 0 to 2 percent slopesMap Unit Setting
Elevation: 800 to 5,500 feetMean annual precipitation: 24 to 26
inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionThurman and similar soils: 99 percentMinor
components: 1 percent
Description of ThurmanSetting
Landform: HummocksDown-slope shape: ConvexAcross-slope shape:
Convex
Custom Soil Resource Report
41
-
Parent material: Sandy eolian depositsProperties and
qualities
Slope: 0 to 3 percentDepth to restrictive feature: More than 80
inchesDrainage class: Somewhat excessively drainedCapacity of the
most limiting layer to transmit water (Ksat): High to very high
(5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 4.6 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: SANDY (R102CY054NE)
Typical profile0 to 16 inches: Fine sand16 to 24 inches: Loamy
fine sand24 to 60 inches: Fine sand
Minor ComponentsPonded soils
Percent of map unit: 1 percentLandform: DepressionsDown-slope
shape: ConcaveAcross-slope shape: Concave
6724Thurman fine sand, 2 to 6 percent slopesMap Unit Setting
Elevation: 800 to 5,500 feetMean annual precipitation: 24 to 26
inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionThurman and similar soils: 99 percentMinor
components: 1 percent
Description of ThurmanSetting
Landform: RidgesDown-slope shape: ConvexAcross-slope shape:
Linear
Custom Soil Resource Report
42
-
Parent material: Sandy eolian depositsProperties and
qualities
Slope: 3 to 6 percentDepth to restrictive feature: More than 80
inchesDrainage class: Somewhat excessively drainedCapacity of the
most limiting layer to transmit water (Ksat): High to very high
(5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 4.6 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 4eHydrologic Soil Group: AEcological
site: SANDY (R102CY054NE)
Typical profile0 to 16 inches: Fine sand16 to 24 inches: Loamy
fine sand24 to 60 inches: Fine sand
Minor ComponentsPonded soils
Percent of map unit: 1 percentLandform: DepressionsDown-slope
shape: ConcaveAcross-slope shape: Concave
6725Thurman fine sand, 6 to 11 percent slopesMap Unit
Setting
Elevation: 1,000 to 2,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionThurman and similar soils: 100 percent
Description of ThurmanSetting
Landform: RidgesDown-slope shape: ConvexAcross-slope shape:
LinearParent material: Sandy eolian deposits
Custom Soil Resource Report
43
-
Properties and qualitiesSlope: 6 to 11 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Somewhat
excessively drainedCapacity of the most limiting layer to transmit
water (Ksat): High to very high (5.95
to 19.98 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding:
NoneAvailable water capacity: Low (about 4.6 inches)
Interpretive groupsFarmland classification: Not prime
farmlandLand capability classification (irrigated): 4eLand
capability (nonirrigated): 6eHydrologic Soil Group: AEcological
site: SANDS (R102CY055NE)
Typical profile0 to 16 inches: Fine sand16 to 24 inches: Loamy
fine sand24 to 60 inches: Fine sand
6753Nora silt loam, 2 to 6 percent slopesMap Unit Setting
Elevation: 1,000 to 1,950 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionNora and similar soils: 100 percent
Description of NoraSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Fine-silty
calcareous loess
Properties and qualitiesSlope: 2 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.20 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: None
Custom Soil Resource Report
44
-
Calcium carbonate, maximum content: 15 percentMaximum salinity:
Nonsaline (0.0 to 2.0 mmhos/cm)Available water capacity: High
(about 11.5 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 3eLand
capability (nonirrigated): 2eHydrologic Soil Group: CEcological
site: LOAMY (R102CY058NE)
Typical profile0 to 7 inches: Silt loam7 to 21 inches: Silty
clay loam21 to 60 inches: Silt loam
6791Loretto loam, 0 to 2 percent slopesMap Unit Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionLoretto and similar soils: 100 percent
Description of LorettoSetting
Landform: FlatsDown-slope shape: LinearAcross-slope shape:
LinearParent material: Loamy eolian deposits
Properties and qualitiesSlope: 0 to 2 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.60 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 10 percentAvailable water capacity:
High (about 11.6 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 1Land
capability (nonirrigated): 1Hydrologic Soil Group: BEcological
site: LOAMY (R102CY058NE)
Custom Soil Resource Report
45
-
Typical profile0 to 10 inches: Loam10 to 28 inches: Loam28 to 50
inches: Loam50 to 60 inches: Loam
6792Loretto loam, 2 to 6 percent slopesMap Unit Setting
Elevation: 1,000 to 3,000 feetMean annual precipitation: 24 to
26 inchesMean annual air temperature: 46 to 50 degrees FFrost-free
period: 140 to 160 days
Map Unit CompositionLoretto and similar soils: 100 percent
Description of LorettoSetting
Landform: HillslopesLandform position (two-dimensional):
Backslope, shoulder, summitDown-slope shape: Convex,
concaveAcross-slope shape: LinearParent material: Loamy eolian
deposits
Properties and qualitiesSlope: 2 to 6 percentDepth to
restrictive feature: More than 80 inchesDrainage class: Well
drainedCapacity of the most limiting layer to transmit water
(Ksat): Moderately high to high
(0.20 to 2.00 in/hr)Depth to water table: More than 80
inchesFrequency of flooding: NoneFrequency of ponding: NoneCalcium
carbonate, maximum content: 10 percentAvailable water capacity:
High (about 11.6 inches)
Interpretive groupsFarmland classification: All areas are prime
farmlandLand capability classification (irrigated): 3eLand
capability (nonirrigated): 2eHydrologic Soil Group: BEcological
site: LOAMY (R102CY058NE)
Typical profile0 to 10 inches: Loam10 to 28 inches: Loam28 to 50
inches: Loam50 to 60 inches: Loam
Custom Soil Resource Report
46
-
9999WaterMap Unit Setting
Elevation: 3,500 to 5,250 feetMean annual precipitation: 22 to
24 inchesMean annual air temperature: 47 to 50 degrees FFrost-free
period: 120 to 150 days
Map Unit CompositionWater: 100 percent
Custom Soil Resource Report
47
-
Soil Information for All Uses
Suitabilities and Limitations for UseThe Suitabilities and
Limitations for Use section includes various soil
interpretationsdisplayed as thematic maps with a summary table for
the soil map units in the selectedarea of interest. A single value
or rating for each map unit is generated by aggregatingthe
interpretive ratings of individual map unit components. This
aggregation processis defined for each interpretation.
Building Site DevelopmentBuilding site development
interpretations are designed to be used as tools forevaluating soil
suitability and identifying soil limitations for various
constructionpurposes. As part of the interpretation process, the
rating applies to each soil in itsdescribed condition and does not
consider present land use. Example interpretationscan include
corrosion of concrete and steel, shallow excavations, dwellings
with andwithout basements, small commercial buildings, local roads
and streets, and lawnsand landscaping.
Corrosion of Steel"Risk of corrosion" pertains to potential
soil-induced electrochemical or chemicalaction that corrodes or
weakens uncoated steel. The rate of corrosion of uncoatedsteel is
related to such factors as soil moisture, particle-size
distribution, acidity, andelectrical conductivity of the soil.
Special site examination and design may be neededif the combination
of factors results in a severe hazard of corrosion. The steel
ininstallations that intersect soil boundaries or soil layers is
more susceptible tocorrosion than the steel in installations that
are entirely within one kind of soil or withinone soil layer.
The risk of corrosion is expressed as "low," "moderate," or
"high."
48
-
T27N R7W
T27N R6W
3 2 1
9
4
11
26
22
12
27
23
15
10
14 13
24
2528
21
16
36353433
6
20
6723
6723
6636
6723672
4
6723
6724 6636 6724
6700
6636
6724
6723
6636
67236636
6723
6723
6723
3280
6320
6723
6700
6636
6636
6723
6700663
6
6636
3163
6724
67236723
6723
6723
3286
6791
6753
6635
6792
3286672
3
3286
4178
3286672
3
3286 6700
6636
6636
6636
3286
6724
4178
6636
4786
4786
3255
4178
6636
6636
6724
6636
6636
6636
4876
6636
47866724
6725
4786 6725
6723
6636
3280
666032866725
6578
6791
6791
6636
3280
6723
6723
6724
4807
4786
4878
6725
6700
3280
4786
6636
6700
67236637
67003255
3164
6724
4179
6700
6636
6700
6636
6636
6636
3165
6636
6636
3164
6723
6700
4179
6791
6703
4179
6636
6723
4786
4240
6700
6792
6753
4786
6723
6700
3286
6753
3164
6723
3164
3268
4786
6724 6700
4178
4178
6724
6724
6753
6792
6725
6637
6700
6723
3280
3268
4786
6636
6791
6791
4178
6791
6725
6700
6724
3281
4786
6792
6791
6791
6637
6636
6723
4786
4878
3163
4786
6636
4786
4786
6723
3164
3280
6637
6635
6636
4878
4879
3163
4879
4179
6723
3164
6723
3165
4179 6723
3163
6723
6700
6636
6791
6723
32524178
6792
3286
6725
6753
3163
4786
3164
6791
3286
6723
3164
23306700
3285
3286
6636
3286
3164
6636
6700
41786753
4878 6700
3164
3164
41793268
6791
6636
6636
4786
4786
3164
4179
6791
2330
6700
6637
3164
6703
6791
6791
6700
6723
4878
3164
6636
9999
4786
3268
6723
3163
4879
4786
6753
4878
6723
2330
4179
3281
6724
6724
6724
6792
6636 4786
6724
6636
6724 3163
6792
6724
41796791
6724
4178
571000
571000
572000
572000
573000
573000
574000
574000
575000
575000
576000
576000
468100
0
468100
0
468200
0
468200
0
468300
0
468300
0
468400
0
468400
0
468500
0
468500
0
468600
0
468600
0
468700
0
468700
0
468800
0
468800
0
0 3,000 6,000 9,0001,500 Feet0 700 1,400 2,100350 Meters
42 20' 52''
98 4' 3
''
42 16' 27''
98 4' 7
''
42 16' 29''
42 20' 54''98
8' 32''
98 8' 2
8''
Map Scale: 1:39,000 if printed on A size (8.5" x 11") sheet.
Custom Soil Resource ReportMapCorrosion of Steel
-
MAP LEGEND MAP INFORMATIONArea of Interest (AOI)
Area of Interest (AOI)Soils
Soil Map UnitsSoil Ratings
HighModerateLowNot rated or not available
Political FeaturesCitiesPLSS Township andRangePLSS Section
Water FeaturesStreams and Canals
TransportationRailsInterstate HighwaysUS RoutesMajor Roads
Map Scale: 1:39,000 if printed on A size (8.5" 11") sheet.
The soil surveys that comprise your AOI were mapped at
1:20,000.
Warning: Soil Map may not be valid at this scale.
Enlargement of maps beyond the scale of mapping can
causemisunderstanding of the detail of mapping and accuracy of soil
lineplacement. The maps do not show the small areas of
contrastingsoils that could have been shown at a more detailed
scale.
Please rely on the bar scale on each map sheet for accurate
mapmeasurements.
Source of Map: Natural Resources Conservation ServiceWeb Soil
Survey URL: http://websoilsurvey.nrcs.usda.govCoordinate System:
UTM Zone 14N NAD83
This product is generated from the USDA-NRCS certified data as
ofthe version date(s) listed below.
Soil Survey Area: Antelope County, NebraskaSurvey Area Data:
Version 9, Jul 27, 2012
Date(s) aerial images were photographed: 7/29/2006
The orthophoto or other base map on which the soil lines
werecompiled and digitized probably differs from the
backgroundimagery displayed on these maps. As a result, some minor
shiftingof map unit boundaries may be evident.
Custom Soil Resource Report
-
TableCorrosion of Steel
Corrosion of Steel Summary by Map Unit Antelope County, Nebraska
(NE003)Map unit symbol Map unit name Rating Acres in AOI Percent of
AOI
2330 Inavale fine sand, rarely flooded Moderate 13.7 0.2%3163
Doger fine sand, 0 to 6 percent
slopesLow 63.9 0.8%
3164 Doger loamy fine sand, 0 to 2percent slopes
Low 123.8 1.5%
3165 Doger loamy fine sand, 2 to 6percent slopes
Low 24.9 0.3%
3252 Meadin sandy loam, 0 to 2percent slopes
Low 7.8 0.1%
3255 Meadin sandy loam, 2 to 30percent slopes
Low 61.3 0.8%
3268 O'Neill sandy loam, 2 to 6percent slopes
Moderate 33.8 0.4%
3280 Paka complex, 0 to 2 percentslopes
High 153.9 1.9%
3281 Paka complex, 2 to 6 percentslopes
High 12.3 0.2%
3285 Paka loam, 0 to 2 percentslopes
High 6.6 0.1%
3286 Paka loam, 2 to 6 percentslopes
High 215.4 2.7%
4178 Longford complex, 1 to 7percent slopes
Low 157.9 2.0%
4179 Longford loam, 1 to 7 percentslopes
High 77.5 1.0%
4240 Ord fine sandy loam, rarelyflooded
High 14.5 0.2%
4786 Valentine fine sand, 0 to 6percent slopes
Low 320.4 4.0%
4807 Valentine fine sand, rolling Low 20.5 0.3%4876
Valentine-Simeon complex, 0 to
3 percent slopesLow 35.3 0.4%
4878 Valentine-Simeon complex, 3 to6 percent slopes
Low 51.3 0.6%
4879 Valentine-Simeon complex, 6 to11 percent slopes
Low 20.3 0.3%
6320 Barney-Boel-Calamuscomplex, channeled
High 54.7 0.7%
6578 Ortello fine sandy loam, 0 to 1percent slopes
Moderate 24.0 0.3%
6635 Boelus fine sand, 0 to 6 percentslopes
Moderate 30.4 0.4%
6636 Boelus loamy fine sand, 0 to 3percent slopes
Moderate 1,652.2 20.6%
Custom Soil Resource Report
51
-
Corrosion of Steel Summary by Map Unit Antelope County, Nebraska
(NE003)Map unit symbol Map unit name Rating Acres in AOI Percent of
AOI
6637 Boelus loamy fine sand, 2 to 6percent slopes
Moderate 54.3 0.7%
6660 Brunswick-Paka complex, 11 to30 percent slopes
High 26.3 0.3%
6700 Thurman loamy fine sand, 0 to2 percent slopes
Low 397.2 5.0%
6703 Thurman loamy fine sand, 2 to6 percent slopes
Low 19.6 0.2%
6723 Thurman fine sand, 0 to 2percent slopes
Low 2,868.9 35.8%
6724 Thurman fine sand, 2 to 6percent slopes
Low 1,004.9 12.6%
6725 Thurman fine sand, 6 to 11percent slopes
Low 132.8 1.7%
6753 Nora silt loam, 2 to 6 percentslopes
Moderate 77.6 1.0%
6791 Loretto loam, 0 to 2 percentslopes
Low 176.3 2.2%
6792 Loretto loam, 2 to 6 percentslopes
Low 67.4 0.8%
9999 Water 3.8 0.0%Totals for Area of Interest 8,005.3
100.0%
Rating OptionsCorrosion of SteelAggregation Method: Dominant
ConditionComponent Percent Cutoff: None SpecifiedTie-break Rule:
Higher
Custom Soil Resource Report
52
-
Soil ReportsThe So