http://www.robokits.co.in http://www.robokitsworld.com Page 1 USB LPC2XXX and P89XXX Programmer [RKI-1425] USB LPC2XXX and P89XXX Programmer [RKI-1425] Users Manual Robokits India http://www.robokits.co.in [email protected]
http://www.robokits.co.in http://www.robokitsworld.com Page 1
USB LPC2XXX and P89XXX Programmer [RKI-1425]
USB LPC2XXX and P89XXX Programmer [RKI-1425]
Users Manual
Robokits India
http://www.robokits.co.in [email protected]
http://www.robokits.co.in http://www.robokitsworld.com Page 2
USB LPC2XXX and P89XXX Programmer [RKI-1425]
Thank you for purchasing the USB LPC2XXX and P89XXX programmer. This unit has been carefully engineered and tested to provide superior performance. This document covers the features and operation of this unit. USB LPC2XXX and P89XXX programmer supports onboard programming through ISP of any PIC microcontrollers from Microchip.This device is specially designed to work with Laptops/Notebooks which doesn’t have Parallel or serial port. This programmer is supported in PICKIT2 programmer software from microchip through Human Interface Device (HID) device mode. It is supported on all versions of Windows, including Windows Vista, 7 and Longhorn. No drivers are required to be installed on computer as all windows have inbuilt drivers for HID device. This Product Includes
USB LPC2XXX and P89XXX programmer USB Cable
Features
ISP programming through Booloader of LPC2XXX series DTR, RTS signals for reset and bootloader enter point LPC2XXX / P89XXX selection switch Simple 6 wire interface Compatible with LPC2138 development board Programmer compatible with Flash magic, LPC21ISP & LPC2000 flash utility(NXP)
*Note: ISP Supply Jumper must be open when using 3.3V device.
http://www.robokits.co.in http://www.robokitsworld.com Page 3
USB LPC2XXX and P89XXX Programmer [RKI-1425]
Supported Microchip PIC microcontroller devices
6 clock/12 clock 8051 2 clock 8051 ARM7 LPC P89C51RB+ P89LPC932 LPC2101 P89C51RC+ P89LPC904 LPC2102
P89C51RD+ P89LPC915 LPC2103
P89C51RB2Hxx P89LPC916 LPC2104
P89C51RC2Hxx P89LPC917 LPC2105
P89C51RD2Hxx P89LPC924 LPC2106
P89C660 P89LPC925 LPC2114
P89C662 P89LPC932A1 LPC2119
P89C664 P89LPC936 LPC2124
P89C668 P89LPC938 LPC2129
P89C669 P89LPC9102 LPC2131
P89C51RA2xx P89LPC9103 LPC2132
P89C51RB2xx P89LPC9107 LPC2134
P89C51RC2xx P89LPC952 LPC2136
P89C51RD2xx P89LPC9401 LPC2138 PXA-G39 P89LPC918 LPC2141
PXA-G49 P89LPC9321 LPC2142
P89C60X2 P89LPC9351 LPC2144
P89C61X2 P89LPC9408 LPC2146
P89LV51RB2 P89LPC9201 LPC2148
P89LV51RC2 P89LPC9211 LPC2194
P89LV51RD2 P89LPC922A1 LPC2210
P89V51RB2 P89LPC9241 LPC2212
P89V51RC2 P89LPC9251 LPC2214
P89V51RD2 P89LPC9301 LPC2220
P89V660 P89LPC931A1 LPC2290
P89V662 P89LPC9331 LPC2292
P89V664 P89LPC9341 LPC2294
P89LPC9402 LPC2364
LPC2366
LPC2368
LPC2378
http://www.robokits.co.in http://www.robokitsworld.com Page 4
USB LPC2XXX and P89XXX Programmer [RKI-1425]
LPC2109
LPC2361
http://www.robokits.co.in http://www.robokitsworld.com Page 5
USB LPC2XXX and P89XXX Programmer [RKI-1425]
ISP Connector The Programmer can program microcontrollers onboard on which they are installed through In-System Programming (ISP) interface. The ISP connector has following pinouts:
1. Green wire: MCLR – Connects to Reset pin of PIC micro. 2. Yellow wire: PGD – Connects to programming data pin PGD 3. Orange wire: PGC – Connects to programming clock pin PGC 4. Red wire: PGM – Connects to GND on programmer 5. Brown wire: VCC – Target power through USB 6. Black wire: GND – Connect to GND of application circuit
http://www.robokits.co.in http://www.robokitsworld.com Page 6
USB LPC2XXX and P89XXX Programmer [RKI-1425]
Service and Support
Service and support for this product are available from Robokits India. The Robokits Web site (http://www.robokits.co.in) maintains current contact information for all Robokits products. Limitations and Warrantees The USB LPC2XXX and P89XXX Programmer is intended for personal experimental and amusement use and in no case should be used where the health or safety of persons may depend on its proper operation. Robokits provides no warrantee of suitability or performance for any purpose for the product. Use of the product software and or hardware is with the understanding that any outcome whatsoever is at the users own risk. Robokits sole guarantee is that the software and hardware perform in compliance with this document at the time it was shipped to the best of our ability given reasonable care in manufacture and testing. All products are tested for their best performance before shipping, and no warranty or guarantee is provided on any of them. Of course the support is available on all of them for no cost.
Disclaimer Copyright © Robokits India, 2011 Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. This document provides preliminary information that may be subject to change without notice.