US440i cone crusher unit in Action Technical specification sheet • Trouble free and optimal production ensured by on board high level Intelligence together with ASRi which comes as standard • Market leading Sandvik CS440 cone crusher with a wide range of mantels and settings for different applications are available. • Material level in the crusher is optimized at all time by a inbuilt monitoring system. This adjusts the feed conveyor speed and feed from the primary unit. • Feed conveyor is hydraulically manoeuvred from and to working position. The input area of the feed conveyor has a 6m3 (212cubic feet) large rubber lined (with Sandvik modular wear protection) feed hopper and is designed for feeding directly from a front loader, or from a primary crusher. The conveyor belt is protected by a steel structure in the hopper, which is enhanced by impact bars that absorbs the shock from loading and extends belt life. • Wireless communication with Sandvik UJ440i primary unit in combination with optional sonar at units discharge conveyor. • Metal detector located before crusher. • It is possible to position the material drop point from the feed conveyor into the crusher via (radio) remote. • Water spray units situated at discharge conveyor and over the crusher. • Unit is fitted with an engine and lubrication oil pre-heater • Platforms are located around the crusher and power pack in order to provide access for inspection and maintenance. • Unit and process is operated via with radio control as an option. Cable remote control as standard. • Sensors are located at strategic locations to ensure a trouble free operation and safe guard against costly breakdowns. • Emergency stop buttons are situated at key locations. • The US440i is transported in one piece, with all components remaining on board. • No oil spillage at filter changes due to vacuumized hydraulic system and dust suppression systems.
2
Embed
US440i cone crusher unit in Action - United Screeningunitedscreeningandcrushing.com/wp-content/uploads/2013/04/US440i.pdf · US440i cone crusher unit in Action ... Crusher Type Sandvik
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
US440i cone crusher unit in ActionTechnical specification sheet
The units depicted show all options currently available, and the colour scheme reflects the eventual scheme to be used. Current models may differ from those featured in this brochure. Please contact Sandvik to clarify specification and options. The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will be suitable for a customer’s particular purpose and enquiry should always be made of the manufacturer to ensure such suitability. Whilst reasonable efforts have been made in the preparation of this document to ensure its accuracy. The manufacturer assumes no liability resulting from errors or omissions in this document, or from the use or interpretation of the information contained herein. The manufacturer reserves the right to make changes to the information in this brochure and the product design without reservation and without notification to users.
Technical specifications
Sandvik US440iOperationHeight 4.9 m / 16’ 1”
Width 3.0 m / 9’ 11”
Length 17.5 m / 57’ 5”
TransportHeight 3.92 m / 12’ 10”
Width 3.0 m / 9’ 11”
Length 18.8 m / 61’ 8”
Weight *1 53 mton / 58 ston
*1 Excluding options
Feed ConveyorConveyor width 1.2 m / 3’ 11”
Conveyor speed 0 - 0.55 m/s / 0 - 2 ft/s
Speed is automatically adjusted to maintain material level in the crusher
Manually adjustable for optimal loading point in crusher
Hopper volume 6 m3 / 210 ft3
CrusherType Sandvik CS440
Drive From diesel engine via V-belts and hydraulic coupling
Sandvik US440iDischarge conveyorBelt width 1400 mm / 4’ 8”
Drive Fixed speed hydraulic motors
Reversable Yes
Approx. discharge height under drum
3.3 - 3.8 m / 10’ 10” +/- 10”
On-board power packEngine Stage 3A / Tier 3 Volvo TAD1252
Note. All weights and dimensions are for standard units only* Available from Feb 2012. Please inquire within for further details.
S A N DV I K CO N S T RU C TI O N M O B I L E C RU S H E R S A N D SC R E E N S LT D.
H E A RT H COT E ROA D S WA D L I N COT E D E R BYS H I R E D E11 9 D U E N G L A N DTEL +44 (0)1283 212121 FAX +44 (0) 1283 217342 in fo.mobi lecs@sandv ik .com www.construct ion.sandv ik .com