- - 1 JOB SPECIFICATION AND SKILL TEST JOB TITLE : CONSTRUCTION CARPENTER (L-1) (ASSISTANT CARPENTER) SECTOR : CIVIL ENGINEERING SUB-SECTOR : ALL Council For Technical Education and Vocational Training NATIONAL SKILL TESTING BOARD Kathmandu, NEPAL 2000
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
- - 1
JOB SPECIFICATION AND
SKILL TEST
JOB TITLE : CONSTRUCTION CARPENTER (L-1) (ASSISTANT CARPENTER)
SECTOR : CIVIL ENGINEERING SUB-SECTOR : ALL
Council For Technical Education and Vocational Training NATIONAL SKILL TESTING BOARD
Kathmandu, NEPAL 2000
- - 2
The National Skill Standard and Test was developed by :
1. Mr. Narayan Dutta Sharma Adviser Chief Engineer Department of Road
2. Mr Bhim Raj Thapa Co-ordinator Superintending Engineer Department of Road
3. Mr Chhatra Bir Bajracharya Member Secretary Technical Officer, STD
4. Mr Babu Kazi Bajracharya Member Carpentry Workshop Incharge I.O.E.
5. Mr Jhanak Bahadur Shahi Member Supervisor, N.C.C.N
Approved by the tripartite National Skill Testing Board. 1989
- - 3
The National Skill Standard and Test is revised by : S. NO. NAME
DESIGNATION ORGANIZATION
1 Mr. Ishwer Raj Onta
Co-Ordinator Director, East Consult Pvt. Ltd., Lazimpat
2 Mr. Harihar Thapaliya
Member Director, Skill Testing Division, CTEVT, Sanothimi, Bhaktapur
3 Mr. G.N. Jha
Member secretary Skill Testing Division, CTEVT, Sanothimi, Bhaktapur
Skill Testing Officer, National Skill Testing Board, CTEVT
9
Er Guna Nanda Jha
Member Secretary
Skill Testing Officer, National Skill Testing Board, CTEVT
Approve by the tripartite National Skill Testing Board.
2009
- - 5
JOB SPECIFICATION 1. JOB TITLE : CONSTRUCTION CARPENTER L-1
LEVEL : 1
2. JOB DESCRIPTION
A construction carpenter as per instruction prepares different type of wood stock, wooden members and laminating to required
prepared size and installs panels, simple common hardware accessories to the wooden fixtures and prepares lay-out, walling materials and surfaces for painting & cleans working area.
3 LIST OF TASK 1 Preparing wood stock and laminating members for the construction of various fixtures as per instruction.
2 Installing different types of prepared window/ door panels, shutter, sliding door/window.
3 Cutting ply-wood, teak ply, metalic sheet, plain wooden panel board other boards and wire mesh to required sized and
installing them in the frames.
4 Installing simple common hardware accessories to the wooden fixtures.
5 Preparing wooden pegs ( Pointed posts ), corner posts, levelling pegs, poling boards, wedges, struts, vertical and horizontal sheeting ( for laying timbering in foundation).
6 Preparing surfaces for painting.
4
QUALIFYING NOTES
Normal health, no special physical (strength) requirement demanded by this job.
Educational requirement: able to read, write and understand specifications & instruction.
- - 6
TASK SPECIFICATION 5 TASK NO. : 1
JOB TITLE : CONSTRUCTION CARPENTER L-1 PREPARING WOOD STOCK AND LAMINATING MEMBERS FOR THE CONSTRUCTIONS OF VARIOUS
WOODEN FIXTURES AS PER INSTRUCTION. 6 TASK ELEMENTS
1.1 Receives verbal instructions/sketches.
1.2 Select and/ or collects appropriate hand tools, equipment and required materials.
1.3 Sharpens different cutting tools.
1.4 Marks on wooden piece as per instruction.
1.5 Cuts previously marked stock to appropriate length and breadth.
1.6 Assists on planning wood stock.
1.7 Houses previously marked simple wooden joints by chiseling and sawing.
1.8 Joins wooden members to increase the required size, for temporary work (trial fitting).
2.1 Distance between the members of the frame measured to determine the length and breadth and marked accordingly to the frame, shutter & panels within + 2mm.
2.2 Required wooden frame cuts according to the door & window frame/shutter within + 2mm.
2.3 Rebate/groove portion cleaned and putty applied uniformly without excess putty.
2.4 Prepared panels, selected according to the size of frame, inserted without damaging and scratching panels which fit to the plumb and line.
2.5 Shutter/panel/sliding pannel installed firmly and tightly to the line and level without damaging gap.
2.6
Cleaned work area.
- - 12
9 10
TASK TRAINING DATA
TASK NO
T.E NO
TECHNICAL KNOWLEDGE APPLIED CALCULATION
GRAPHIC INFORMATION
SAFETY & HYGIENE
2 1 Identification of required materials.
.
2
Knowledge of taking measurements.
Able to read and take measurements with
measuring tape
Knowledge of proper dress to avoid accidents and first aid practice and reporting.
3 Knowledge of using & cleaning proper tools & equipments.
Hazards involved in tools & equipments.
4 Knowledge of handling, selecting and/or inserting prepared panels according to the size and requirement of the frames.
Hazards involved in handling panels/shutter & their prevention.
5 Knowledge of installing shutter/panels to the frame.
Hazards involved in fixing the shutter/ Panels.
- - 13
TASK PERFORMANCE TEST ( SKILL ASSESSMENT)
11
TASK NO : 2 TASK TITLE : INSTALLING DIFFERENT TYPES OF PREPARED WINDOW/ DOOR, PANELS, SHUTTERS. AND SLIDING DOOR/WINDOW
LOCATION OF TEST: CANDIDATE' S NAME: EVALUATOR'S NAME:
12 TASK FACTORS AND ITEMS STANDARD MET STANDARD NOT MET (Comments) DID THE CANDIDATE ?
Select and/or collect required materials and appropriate tools and equipments.
2.1
2.2 Measure distance between the members of the frame and mark accordingly to the shutter/panels within +_ 2mm.
2.3 Cut shutter/panels according to frame within +2mm.
2.4 Clean rebate/groove portion.
2.5 Select prepared glass panel/shutter according to frame size and insert it without breaking and scratching to fit frame to the plumb and line.
2.6 Install the panel firmly and tightly to the line and level without damaging the prepared panels/shutters without gap.
2.7 Dress himself safely and cleans work area.
2.8 Observe related safety precautions.
- - 14
TASK SPECIFICATION 5 TASK NO. : 3
JOB TITLE : CONSTRCUTION CARPENTER L-1 CUTTING PLY-WOOD, TEAK PLY, METALIC SHEET, PLAIN WOODEN PANEL BOARD, OTHER BOARDS
AND WIRE MESH TO REQUIRED SIZES AND INSTALLING THEM IN THE FRAMES.
6 TASK ELEMENTS
3.1 Receives verbal instructions/sketches.
3.2 Measures frames to determine the length and breadth to cut and/or prepare the materials.
3.3 Cuts/prepares material to required size.
3.4 Cleans rebate or groove portion if required.
3.5 Applies glue where required.
3.6 Inserts or installs ply-wood/teak ply/metallic sheet/plain wooden panel, different board and/or wire mesh to the frame.
vice, screw clamp, c-clamp, hammer, oil stone, adze (bashila), spirit level, hose pipe, plumb-bob, snipper, nail set, portable power hand tools, sandpaper , saw file, mallet and chisels, nails, wood stock, carpentor's pincers, marking gauge, metal scizer.
8 TASK PERFORMANCE STANDARDS 3.1 Frames measured to determine the size to prepare and/or cut stock straight/square to the size within +2mm.
3.2 Stock prepared and/or cut straight/square according to the taken measurement within + 2mm.
3.3 Rebate/groove portion cleaned if required.
3.4 Applied glue uniformly without excess where required.
3.5 Ply-wood/teak ply/metalic sheet/plain wooden panel different boards and/or wire mesh inserted and/or installed by nailing firmly
to secured stock or board by alternate, horizontal and vertical lines.
3.6 Wooden and other beads installed firmly by nailing to the line and level where required without damaging.
- - 16
9 10
TASK TRAINING DATA
TASK NO
T.E NO
TECHNICAL KNOWLEDGE APPLIED CALCULATION
GRAPHIC INFORMATION
SAFETY & HYGIENE
3 1 Identification of required materials.
2
Knowledge of taking measurements. Able to read and take measurements with measuring tape.
Knowledge of proper accidents.
3
Knowledge of required tools & equipments.
First aid practice and reporting.
4
Knowledge of using & cleaning tools & equipment.
Hazards involved in handling tools & equipments.
5
Knowledge of applying glue uniformly. Hazards involved in handling cleaning tools & different materials.
6
Knowledge of inserting and installing cut ply-wood, teak ply/metallic sheet/ plain wooden panel board and/or wire mesh to the frame.
7 Knowledge of installing wooden and other beads to the frame.
- - 17
TASK PERFORMANCE TEST ( SKILL ASSESSMENT)
11
TASK NO : 3 TASK TITLE : Cutting ply-wood, teak ply, metalic sheet, plain wooden panel board other boards and wire mesh to required sized and installing them in the frames.
LOCATION OF TEST: CANDIDATE' S NAME: EVALUATOR'S NAME:
12 TEST FACTORS AND ITEMS STANDARD MET STANDARD NOT MET (Comments) DID THE CANDIDATE ?
Select and/or collect required materials and appropriate tools and equipments.
3.1
3.2 Measure frames to determine the size within + 2mm.
3.3 Prepare and/or cut stock straight/square according to
the measurement taken within + 2mm.
3.4 Clean rebate/groove portion well.
3.5 Apply glue uniformly where required.
3.6 Insert and/or install stock by nailing alternate horizontal and vertical lines, firmly to tighten and secure the stock to the frame.
3.7 Install wooden and otherbeads to the line and level firmly by nailing where required without damaging.
3.8 Observe related safety precaution.
3.9 Clean work area.
- - 18
TASK SPECIFICATION 5 TASK NO. : 4
JOB TITLE : CONSTRUCTION CARPENTER L-1 INSTALLING SIMPLE COMMON HARDWARE ACCESSORIES TO THE WOODEN FIXTURES.
6 TASK ELEMENTS
4.1 Receives verbal instructions/sketches.
4.2 Selects/collects hardware accessories.
4.3 Chiseling and/ or sawing for hardware accessories.
4.4 Installs simple common hardware accessories to the wooden fixtures.