UPLIFT 4-Leg Height Adjustable Standing Desk · 2017. 9. 18. · 2 1-8-34-383 infoupliftdesk.com 2. USAGE This height adjustable desk has an electric motor and is designed for use
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
90.014.01.0146v.D
DIRECTIONS FOR ASSEMBLY AND USE
UPLIFT 4-Leg Height Adjustable Standing Desk
®
SAVE THESE INSTRUCTIONS: Any user or installer of desk base must study this manual carefully. If this desk is sold,
please provide the manual to the buyer, installers, or support personnel operating the product.
TABLE OF CONTENTS PAGE
1 Safety and Warnings 22 Usage 23 Parts List 34 Assembly Instructions 45 Desk Placement 76 Programming 77 Troubleshooting 88 TechnicalSpecifications 9
Thisheightadjustabledeskhasanelectricmotorandisdesignedforuseindryworkareasonly.Thedeskheight is adjustable so that it can be positioned at the most ergonomically suitable height. These desks are designedonlyforthepurposesincludedinthismanual.Theyshouldnotbeusedinenvironmentswithhighhumidity or dampness. Any other use is at user’s risk.
Whenusinganelectricalfurnishing,basicprecautionsshouldalwaysbefollowed,includingthefollowing:Read all instructions before using the desk.
FAILURE TO COMPLY WITH OR OBSERVE ALL INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS PROPERTY DAMAGE OR BODILY INJURY.
DANGER - Toreducetheriskofelectricshock,alwaysunplugthisfurnishingfromtheelectricaloutlet before cleaning, or before putting on or taking off parts.
• Closesupervisionisnecessarywhenthisfurnishingisusedby,ornearchildren,invalids,ordisabledpersons.Keepchildrenawayfromelectricheight-adjustabledesks,controlunits,andkeypads.There is a risk of injury and electric shock.
• Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
shock. Do not insert anything into any seam or opening.• Keepallelectricalcomponentsawayfromliquids.• Donotoperatewhereaerosol(spray)productsarebeingusedorwhereoxygenisbeingadministered.• Do not use outdoors.• Inappropriate use of this product may cause property or bodily injury.• Check surroundings on all sides before using the desk. Body parts and property can be crushed if trappedbetweenanimmobileobstacleandthedesk’srangeofmotion.
• Please provide this manual to any users, installers, or support personnel operating the product.
MAKE SURE NO OBSTACLES ARE IN THE DESK’S PATH AND ALL CORDS ARE OF APPROPRIATE LENGTH FOR DESK TRAVEL. FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY, AND OPERATION INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS PROPERTY DAMAGE OR BODILY INJURY.
Please count all pieces before disposing of any carton or packing material. Use a padded or carpeted area for assembly to avoid damage. For ease and safety, we recommend two people for assembly.
B. PlaceeachZeroCrossbarBracket(part3)ontheundersideofthedesktop.CarefullymeasurefromallsidesandattachtheZeroCrossbarBrackets(part3)totheundersideofthedesktopwithtwenty-four(24)PanHeadScrews(part10),six(6)perbracket.
Double-checkthatthewoodscrewsare not too long for the desktop andwon’tpuncturethesurfacewhenscrewedallthewayin.
Ifyourdesktopisnotpre-drilled,werecommendthat you pre-drill the holes for connecting the Brackets(part3)tothedesktop.Drill1/2’’deep(max)witha1/8’’drillbit.Neverusecountersunkscrews.
D. Attachthefour(4)SmallFeet(part2) tothefour(4)Legs(part1),eachwith four(4)MachineScrews(part9).
9
2
E. Usingthecables,connecttheLegs(part1) totheControlbox(part5)andtheKeypad (part6)asperthediagrambelow.
Do this so you can place the Keypad andControlBoxinsuchawaysothat the cables can reach them.
C. Usingthesuppliedallenwrench,insertfour(4)MachineScrews(part9)throughtheholesineachZeroCrossbar Bracket(part3)goingintotheLeg(part1) androtateeachscrewjustafewturns.
G. Turntheassembleddeskright-side-up.Withtwopeople,grabthedeskbythelegsanddesktop and turn the desk right-side up. Adjust the Leveling studs on the Feet as needed.
MAKE SURE NO OBSTACLES ARE IN THE DESK’S PATH. MAKE SURE ALL CORDS ARE OF A LENGTH THAT WILL
ACCOMMODATE THE CHANGE IN HEIGHT.
H. PlugthePowerCordintoa110voutlet.IMPORTANT!
You must RESET the desk prior to use! Press and hold the DOWN button on the Keypad until the desk reaches itslowestheight.ReleasetheDOWNbutton.PressandholdtheDOWN buttonagainuntiltheLEDdisplayreads“RST”orabout10secondson non-LED handset models. Release the DOWN button. Press and hold theDOWNbuttonagainuntilthedesklowersalittlebitmore,slightly risesandstops.ReleasetheDOWNbutton.Yourdeskisnowreadytouse.
F. AttachtheControlBox (part5)totheundersideof thedesktopusingtwo(2)M5x16 Screws(part10).Ensureitisplacedclose to the center of the desktop so the cables can reach it.
When moving the desk, DO NOT lift the desk by the desktop alone, or the frame, alone. Support both the frameandthedesktopequally.Favoringoneovertheothercanstressthefastenersconnectingthedeskframetothedesktop.Lowerthedeskcompletelyandliftthedeskbygraspingtheframe.
Chooseaplacementforthedeskthat’sasafedistancefromwindowframes,radiators,furniture,etc.,sothat people do not get stuck or trapped by the desk.
Checkcordclearance,sothattheydon’tgetjammed.Thenconnectthedesktothe120voutletandthedesk is ready for use.
If you’ve purchased an UPLIFT Desk and the Advanced 1-touch digital keypad, press the DOWN button ontheKeypaduntiltheframereachesitslowestposition.Measuretheheightoftheframefromthefloorto the underside of the desktop and if the number on the LED display does NOT match your measure-ment,followthesesteps:
Press and hold the DOWN button again until the LED display reads “RST”
MakesurethepowerisONandanumberreadsintheLEDdisplay(ifnonumberappears,pleasefollowtheResetproceduredescribedintheTROUBLESHOOTINGsectionbelow). To Set the Upper-Limit Position: UsetheUP/DOWNbuttonstomovetheframetothedesiredmaximumheightposition.MakesuretheUPbuttonwasthelastbuttonyoupushed.Pressandholdthe“M”buttonuntiltheLEDdisplayflashes“S-”onceandletgoofthebuttonThenpressandreleasethebutton2moretimesinquicksuccession.TheLEDdisplaywillchangeto“999”onthethirdpush,andthenautomaticallyreturntotheselectedheight.Thenewupperlimitisnowset.
To Set the Lower-Limit Position: UsetheUP/DOWNbuttonstomovetheframetothedesiredminimumheightposition.MakesuretheDOWNbuttonwasthelastbuttonyoupushed.Pressandholdthe“M”but-tonuntiltheLEDdisplayflashes“S-”onceandletgoofthebutton.Thenpressandre-leasethebutton2moretimesinquicksuccession.TheLEDdisplaywillchangeto“000”onthethirdpush,andthenautomaticallyreturntotheselectedheight.Thenewlowerlimitisnowset.
To Remove the Upper/Lower Limit Positions: UsetheUPorDOWNbuttontomovethedesktoanynewposition.Pressandholdthe“M”buttonuntiltheLEDdisplayflashes“S-”onceandletofthebutton.Thenpressandreleasethebuttoninsuccessionuntilthedisplaychangesto“555”(ignoreanyinterimreadings).Afterafewseconds,thedisplaywillautomaticallychangebacktothenum-beredheightposition.Theupperandlowerlimitsarenowremoved.
• UnplugthepowercordandholdtheDOWNbuttonfor30seconds.• Plugthepowercordbackin.• PressandholdtheDOWNbuttonontheKeypaduntilthedeskreachesitslowestheight.ReleasetheDOWNbutton.PressandholdtheDOWNbuttonagainuntiltheLEDdisplayreads“RST”orabout10seconds on non-LED keypad models. Release the DOWN button. Press and hold the DOWN button againuntilthedesklowersalittlebitmore,slightlyrisesandstops.ReleasetheDOWNbutton.Yourdeskisnowreadytouse.
Ifcastersarenotinstalled,useatwo-personliftandliftthedesksothatitcanbemovedwithoutdragging.Draggingthedeskmaycausetheframeandscrewsto pull loose from the desktop.
!
Copyright Notice: This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide is also availableontheUPLIFTDeskwebsite:upliftdesk.com.ExcerptsorcopiesmaynotbeforwardedtothirdpartiesorusedinanyotherpublishedformwithoutthepriorwrittenconsentofUPLIFTDesk.