ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ATLANTIC PLASTICS is a company of
UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any plane-ended rigid pipe material from 32mm to 800mm pipe nominals.
This flexibility combined with each fittings ability to accommodate a wide variety of pipe sizes makes the UPE MultiDiameter fitting a versatile and economical product to use.
Benefits• Availableinarangeofsteppedand equal couplings and flange adaptors from 32mm - 800mm (11/2� - 32�)
• Awidetoleranceofupto43mmmeans extreme versatility of fitment
• Widetolerancesallowforreduced stock holdings
• Quickandefficientinstallationwithout disassembly or any loose components
• Suitsallcommonrigidpipematerials
• Prolongedlifeoffittingduetothehigh quality corrosion protective coating used
Technical dataPressures Working Test Water: 16bar 24bar Gas: 7 bar 11 bar
Higher pressure options are available on request. For further details please contact our customer service department at the telephone number shown on the closing page.
Temperature: -20°C to +80°C at PN 16
Higher temperatures will affect the installed life of the product. For further information relating to higher operating temperatures please contact our customer service department.
Sizes:40mm-845mm
Flange type: PN 10/16ANSI150(Availableonrequest)
Max angular deflection:+/-5°
Material:Body: Ductile Iron Gland Rings: Ductile Iron
Coating: BlueEpoxy(UNE4802980)(Alternativecoatings available on request)
Fasteners: Bolts & Nuts: Grade 8.8. Dichromate Zinc Plated with Cataphoretic Coating.
Sealing Gaskets: Water EPDM (EN 681) Gas Nitrile EN 682
Technical help
For further product specifications, technical data and general information please contact the Customer Service Team on the telephone number shown on the closing page of this data sheet.
SafetyAs with all industrial products it is important to take adequate safety precautions such as the use of adequate protective clothing like gloves, overalls, eye protection and safety footwear during use, maintenance and installation.
General applicationTolerances between the minimum and maximum sizes of each fitting vary between35and43mm.Thiswiderangemakes the UPE MultiDiameter product exceedingly versatile and particularly suitable for connecting pipes of different rigid materials such as Asbestos cement, PVC or Cast Iron.
Flange adaptor dimensions are to DIN 28605andtheinnerdiameterofthebodycoincides with the nominal diameter of the flange adaptor so providing a stop.
MultiDiameter flange adaptors can be used in conjunction with any type of flanged valve including butterfly and gate valves. All fittings are WRAS listed for below and above ground use with the exception of recent additions which have been submitted but not yet tested.
Mains Connections - MultiDiameterWide tolerance couplings and Flange Adaptors
Product Selection Guide - Couplings - 300mm to 800mm Nominal Bore
Mains Connections - MultiDiameterWide tolerance couplings and Flange Adaptors
Product Selection Guide - Flange Adaptors 300mm - 800mm Nominal Bore Flange Drilling PN 10/16to 800mm Nominal Bore
Mains Connections - MultiDiameterWide tolerance couplings and Flange Adaptors
Mains Connections - MultiDiameterWide tolerance couplings and Flange Adaptors
Mains Connections - MultiDiameterWide tolerance couplings and Flange Adaptors
TALIS UK Edison Road Hams Hall Distribution Park Coleshill, Birmingham B461ABUnitedKingdom
Tel:+44(0)1675437900 Fax:+44(0)1675437909 Email: [email protected] Web: www.talis-group.com
We reserve the right to change the design and specification without notice.
© Tyco 2006 2K (06/06) TUPE/300.3
Tyco WaterworksNobel Road, Eley Trading Estate.Edmonton, London. N18 3DW.United Kingdom.Tel: +44 (0)208 884 4388Fax: +44 (0)208 884 4766e-mail: [email protected]: www.tycowaterworks.com
Mains Connections - Engineered - 80mm to 2,200mm
Associated Products
The UPE Dismantling Joint offers benefits for planning, installation and maintenance of all flanged fittings and flanged pipework with a nominal bore ofup to 2,200mm.The Dismantling Joint offers a longitudinal adjustment by way of the flangedspigot fitted within a flange adaptor body. Once installed to the required length,the UPE Dismantling Joint offers a fully end load resistant connection.
The UPE Converter Slide Valve is an effective, full bore construction valve that will allow underpressure drilling operations to be performed on eitherwater distribution systems under pressures of up to 10 bar or gas distributionsystems under pressures of up to 7 bar.Optimum space and weight savings have been made in the valve’s design soproviding a robust valve that is simple to install and use.
The Soft Sealing, Resilient Seated Gate Valve is manufactured to BS 5163 and EN1074 and is one of thelightest valves of its class on the market today. It hasbeen specifically designed and developed with ease ofuse and length of installed service life in mind. Selectionof robust, quality materials combined with engineeringexperience has enabled the development of a valve thatsolves many of the problems encountered wheninstalling, operating and servicing gate valves.
UPE Engineered couplings and flange adaptors are not fully end load restrained, please ensure adequaterestraint is provided. These fittings are not suitable for use on PE pipe.
The UPE MultiDiameter range of wide tolerance couplings and flange adaptorscan be used for almost any plain-ended rigid pipe material from 32mm to800mm pipe nominals.This flexibility combined with each fittings ability to accommodate a widevariety of pipe sizes makes the UPE MultiDiameter fitting a versatile andeconomical product to use.
The UPE Universal range of wide tolerance couplings, stepped couplings,flange adaptors and end caps can be used on almost any plain-ended rigid pipematerial from 40mm to 300mm pipe nominals. This flexibility combined witheach fittings ability to accommodate a wide variety of pipe sizes makes theUPE Universal fitting a versatile and economical product to use.
Engineered Couplings and FA's 25-05-06 4 page option MK2.qxp 13/06/2006 12:20 Page 4
Associated Products
Related Documents
