Pearl Luxe Pearl Luxe Finished Quilt Size: 82” x 95 ½” 49 West 37th Street, New York, NY 10018 tel: 212-686-5194 fax: 212-532-3525 Toll Free: 800-294-9495 www.henryglassfabrics.net Quilt 1 Skill Level: Intermediate Quilt Design by Heidi Pridemore UPDATED ON JUNE 29, 2018 A Free Project Sheet NOT FOR RESALE
7
Embed
UPDATED ON JUNE 29, 2018 Pearl Luxe...UPDATED ON JUNE 29, 2018 A Free Project Sheet NOT FOR RESALE Pearl Luxe Fabrics in the Collection Finished Quilt Size: 82 x 95 ½ Quilt 1 Pearl
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Pearl LuxePearl Luxe
Finished Quilt Size: 82” x 95 ½”49 West 37th Street, New York, NY 10018
From the Crackle - Onyx (A), cut:• (5) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 86” strips.• (4) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 82 ½” strips.• (1) 3” x WOF strip.• (15) 2 ¾” x WOF strips.• (8) 2 ½” x WOF strips. Sub-cut (30) 2 ½” x 8 ½” strips.• (15) 2 ½” x WOF strips. Sub-cut (30) 2 ½” x 14 ½” strips.• (9) 2 ½” x WOF strips for the binding.
From the Pearl Flower - Onyx (B), cut:• (1) 3” x WOF strip.• (15) 2 ¾” x WOF strips.• (16) 2 ½” x WOF strips.• (1) 1 ½” x WOF strip. Sub-cut (4) 1 ½” squares.
From the Granite - Gray (C), cut:• (32) 2 ½” x WOF strips. From the Marble - Charcoal (D), cut:• (1) 3” x WOF strip.• (15) 2 ¾” x WOF strips.• (16) 2 ½” x WOF strips.
From the Crackle - Oyster (E), cut:• (1) 3” x WOF strip.• (15) 2 ¾” x WOF strips.• (8) 2 ½” x WOF strips. Sub-cut (30) 2 ½” x 8 ½” strips.• (15) 2 ½” x WOF strips. Sub-cut (30) 2 ½” x 14 ½” strips.
From the Lemongrass Weave - Burnt Orange (F), cut:• (4) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 84” strips.• (4) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 70 ½” strips.
From the Granite - Gray (Backing), cut:• (3) 90” x WOF strips for the backing. Sew the strips together and trim to make the 90” x 104” back.
2 ¾” x WOF2 ½” x WOF2 ½” x WOF2 ¾” x WOF
make 15 strip setsABCD
3” x WOF
3” x WOF2 ½” x WOF2 ½” x WOF
make 1 strip set
ABCD
Sewing Instructions1. Sew (1) 2 ½” x WOF Fabric C strip to the top of (1) 2 ¾” x WOF Fabric D strip lengthwise. Sew (1) 2 ½” x WOF Fabric B strip to the top of the Fabric C strip lengthwise. Sew (1) 2 ¾” x WOF Fabric A strip to the top of the Fabric B strip lengthwise to make (1) AD strip set (Fig. 1). Repeat to make (15) AD strip sets total.
2. Cut (4) Template 1 triangles from (1) AD strip set to make (4) Unit 1-A triangles (Fig. 2). Repeat to make (30) Unit 1-A triangles and (30) Unit 1-B triangles total.
3. Sew (1) 2 ½” x WOF Fabric B strip to the top of (1) 3” x WOF Fabric A strip lengthwise. Sew (1) 2 ½” x WOF Fabric C strip to the top of the Fabric B strip lengthwise. Sew (1) 3” x WOF Fabric D strip to the top of the Fabric C strip lengthwise to make (1) DA strip set (Fig. 3).
Template 1
Template 1
Template 1
Template 1
Unit 1-Acut (28) from (7) AD strip sets
Template 1
Template 1
Template 1
Template 1
Unit 1-Bcut (28) from (7) AD strip sets
Template 1
Template 1
Unit 1-A & Unit 1-Bcut (2) of each from (1) AD strip set
Template 1
Template 1
Page 2Pearl Luxe Quilt 1
Fig. 8
Fig. 9
Fig. 10
Fig. 7
Fig. 5
Fig. 6
2 ¾” x WOF2 ½” x WOF2 ½” x WOF2 ¾” x WOF
make 15 strip setsBCDE
3” x WOF
3” x WOF2 ½” x WOF2 ½” x WOF
make 1 strip set
BCDE
Template 2
Template 2
Template 2
Template 2
Template 2
Unit 4cut 5
2 ½
” x 8
½”
E
Unit 1-A
Unit 1-B
Unit 5make 30
5. Sew (1) 2 ½” x WOF Fabric D strip to the top of (1) 2 ¾” x WOF Fabric E strip lengthwise. Sew (1) 2 ½” x WOF Fabric C strip to the top of the Fabric D strip lengthwise. Sew (1) 2 ¾” x WOF Fabric B strip to the top of the Fabric C strip lengthwise to make (1) BE strip set (Fig. 5). Repeat to make (15) BE strip sets total.
6. Cut (4) Template 1 triangles from (1) BE strip set to make (4) Unit 3-A triangles (Fig. 6). Repeat to make (30) Unit 3 triangles and (30) Unit 3-B triangles total.
7. Sew (1) 2 ½” x WOF Fabric C strip to the top of (1) 3” x WOF Fabric B strip lengthwise. Sew (1) 2 ½” x WOF Fabric D strip to the top of the Fabric C strip lengthwise. Sew (1) 3” x WOF Fabric E strip to the top of the Fabric D strip lengthwise to make (1) EB strip set (Fig. 7).
8. Cut (5) Template 2 triangles from (1) BE strip set to make (5) Unit 4 triangles (Fig. 8).
9. Sew (1) Unit 1-A triangle to the left side of (1) 2 ½” x 8 ½” Fabric E strip lengthwise as shown in Figure 9. Sew (1)Unit 1-B triangle to the right side of the Fabric E stripto make (1) Unit 5 block. Pay attention to the unit triangle orientations. Repeat to make (30) Unit 5 blocks total.
10. Sew (1) Unit 3-A triangle to the left side of (1) 2 ½” x 8 ½” Fabric A strip lengthwise as shown in Figure 10. Sew (1) Unit 3-B triangle to the right side of the Fabric A strip to make (1) Unit 6 block. Pay attention to the unit triangle orientations. Repeat to make (30) Unit 6 blocks total.
2 ½
” x 8
½”
A
Unit 3-A
Unit 3-B
Unit 6make 30
Template 1
Template 1
Template 1
Template 1
Unit 3-Acut (28) from (7) BE strip sets
Template 1
Template 1
Template 1
Template 1
Unit 3-Bcut (28) from (7) BE strip sets
Template 1
Template 1
Unit 3-A & Unit 3-Bcut (2) of each from (1) BE strip setp
Template 1
Template 1
Template 2
Template 2
Template 2
Template 2
Template 2
Unit 2cut 5
4. Cut (5) Template 2 triangles from (1) DA strip set to make (5) Unit 2 triangles (Fig. 4).
Fig. 4
Page 3Pearl Luxe Quilt 1
Fig. 12 Fig. 13 Fig. 14Fig. 11
Quilt Top Assembly (Refer to the Quilt Layout while assembling.)11. Sew (6) 2 ½” x 14 ½” Fabric E strips and (6) Unit 5 blocks together as shown in Figure 11 on Page 3. Sew (1) Unit 2 triangle to the top of the sew strip to make (1) Column 1 strip. Repeat to make (5) Column 1 strips total.
12. Trim the Column 1 strips as shown in Figure 12 on Page 3 to measure 7 ½” x 84” to complete the columns.
13. Sew (6) 2 ½” x 14 ½” Fabric A strips and (6) Unit 6 blocks together as shown in Figure 13 on Page 3. Sew (1) Unit 4 triangle to the top of the sew strip to make (1) Column 2 strip. Repeat to make (5) Column 2 strips total.
14. Trim the Column 2 strips as shown in Figure 14 on Page 3 to measure 7 ½” x 84” to complete the columns.
15. Sew the (5) Column 1 strips and (5) Column 2 strips together lengthwise, alternating them, to make the Center Block.
16. Sew (1) 1 ½” x 84” Fabric F strip to each side of the Center Block. Sew (1) 1 ½” Fabric B square to each end of (1) 1 ½” x 70 ½” Fabric F strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block.
17. Sew (1) 5 ½” x 86” Fabric A strip to each side of the Center Block. Sew (1) 5 ½” x 82 ½” Fabric A strip to the top and to the bottom of the Center Block to make the quilt top.
18. Layer and quilt as desired.
19. Sew the (9) 2 ½” x WOF Fabric A strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.
20. Bind as desired.
Column 1make 5
2 ½” x
14 ½”
2 ½” x
14 ½”
2 ½” x
14 ½”
2 ½” x
14 ½”
2 ½” x
14 ½”
2 ½” x
14 ½”
E
E
E
E
E
E
Unit 5
Unit 5
Unit 5
Unit 5
Unit 5
Unit 5
Unit 2
Trim to measure7 ½” x 84”
Column 2make 5
2 ½” x 14 ½”
2 ½” x 14 ½”
2 ½” x 14 ½”
2 ½” x 14 ½”
2 ½” x 14 ½”
2 ½” x 14 ½”
A
A
A
A
A
A
Unit 6
Unit 6
Unit 6
Unit 6
Unit 6
Unit 6
Unit 4
Trim to measure7 ½” x 84”
Page 4Pearl Luxe Quilt 1
Quilt Layout
B
B BF
F
FF A
A
A
A
B
Page 5Pearl Luxe Quilt 1
Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.henryglassfabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.