UNIVERSITI PUTRA MALAYSIA · Universiti Tun Hussein Onn Malaysia Student Supervision – Master . 7 | updated 14/8/2017 Main Supervisor 1. Aiman Razak GS39806 Fuzzy Logic Design for

1 | updated 14/8/2017

UNIVERSITI PUTRA MALAYSIA

CURRICULUM VITAE

A. Biodata

a. Name: Mohd Khair Hassan

b. Salutation: Associate Professor. P.Eng, PhD

c. Department: Electrical and Electronic

d. Faculty: Engineering

e. Field of Specializations:

Control System, System Identification and modelling,

x-by-wire, Automotive Electronic Control,

B. EDUCATION AND ACADEMIC QUALIFICATIONS

Degree Class/Achievement University Awarded Year

PhD Automotive Engineering Universiti Putra Malaysia 2011

Master Electrical and Electronic

(Control)

Universiti Teknologi Malaysia 2001

B.Eng Electrical and Electronic

Engieering (Control)

Portsmouth, UK 1998

Diploma Electrical and Electronic

Engieering

Institut Teknologi Mara 1995

C. PROFESSIONAL QUALIFICATION

Membership Qualification Field Institution

C116635 Professional Engineer-with

practicing certificate

Electronic Board of Engineers Malaysia

2015 MQA panel

Electronic

/Automotive

Malaysian Qualifications Agency

2016 EAC Panel Electronic EAC, Board of Engineers Malaysia

2 | updated 14/8/2017

D. ACADEMIC APPOINTMENTS

No. Position Department/Faculty/Other Institution Year Duration

1. Associate Professor Department of Electrical and Electronic

Engineering Faculty of Engineering, UPM

7/2016-

present

present

2. Senior Lecturer Department of Electrical and Electronic


2008-6/2016 7 years

3. Associate Researcher Centre of Advanced Power and Energy

Research (CAPER), Faculty of

Engineering, UPM

2014-2017 3 years

4. Academic Researcher PROTON Professor Office, Engineering

Division Perusahaan Otomobil National

Sdn Bhd)

2012-2013 1 year

5. Associate Researcher Institute of Advanced Technology (ITMA),

UPM

2013-2016 3 years

6. Lecturer Department of Electrical and Electronic


2001-2007 7 years

7. Tutor Department of Electrical and Electronic


1999-2001 2 years

E. ADMINISTRATIVE DUTIES AND OTHER RESPONSIBILITY

No. Position Department/Faculty/Other Institution Year Duration

1. Expert Reference in

Electrical and Electronic

for JKKP

Jawatan Kuasa Keselamatan and Kesihatan

Pekerja (JKKP)- Fakulti Kejuruteraan

9/2014-

present

-

2. Presiden Kelab Sukan dan Sosial, Fakulti

Kejuruteraan

2016-2018 2 years

3. FELO of College 14

Universiti Putra Malaysia 2003-2005 2 years

4. Departmental

Development

Coordinator

Department of Electrical and Electronic

Engineering

9/2014-to

date

5. Lab Coordinator Laboratory of Control and Automation,


Engineering

2013-to date

6. Coordinator- Final Year

Project


Engineering

2013-to date

7. Associate researcher Institute of Advanced Technology, Faculty

of Engineering

2013-2016 3 years

8. Associate Researcher Center of Power and Advanced

Energy (CAPER), Faculty of engineering

July 2014-

July 2017

3 years

9. Head of Control Unit Department of Electrical and Electronic

Engineering

2008-2011 3 years

10. Adjunct Researcher Center for Electromagnetic and Lightning

Protection (CELP), Faculty of Engineering

2009-2011 3 years

11. Moderator Final Year

Project


Engineering

2012-present

3 | updated 14/8/2017

12. Committee, Task Force

EAC


Engineering

2014-present

13 Program Coordinator: UNITI College-UPM for Bachelor Program

in Electrical and Electronic

2002-2003 1 year

F. ACADEMIC AWARDS AND RECOGNITIONS

Name of

awards

Title Award Authority Year

1 Excellent in

Service

Perkhidmatan Cemerlang Universiti Putra Malaysia 2014,

2015,16

2 Professional

Engineer

Professional Engineer Board of Engineers Malaysia 2014

3. Excellence in

Service

Sijil Perkhidmatan Cemerlang Universiti Putra Malaysia 2004,

2011,

2013

4 Silver Medal Hardware-in-Loop (HiL) of Fault

Detection for Air-Fuel Ratio Control

Principal Investigator

International Engineering

Invention and Innovation

Exhibition (i-ENVEX).

April11th -13th 2014: Universiti

Malaysia Perlis

2014

5 Excellent in

Teaching

Excellent in Teaching Faculty of Engineering 2013,

2012

2011,

2010,

2009,

2004

6. Gold Medal Electronic Control Unit (ECU) for

Compressed Natural Gas Direct

Injection (CNGDI) Vehicle

Researcher

Malaysia Technology Expo

2008, 21-23 February 2008.

2008

7. Gold Medal Software system for detecting

defective symbols on microchip with

adjustable readability level.

Researcher

International Exhibition of

Ideas-Inventions-New

Products (IENA) 2007,

Nuremberg, Germany, 1st. – 4th

November, 2007.

2007

8. Gold Medal Software System for Detecting

Defective Symbols on Micro Chip

with Adjustable Readability Level

Researcher

18th International Invention,

Innovation & Technology

Exhibition (ITEX 2007), 18-20

May 2007 Kuala Lumpur,

Malaysia.

2007

9. Silver Medal New Electronic Control Unit Control

Strategy for Compressed Natural as

Direct Injection Vehicle- Researcher

Pameran Rekacipta

dan,Penyelidikan dan Inovasi,

UPM

2007

4 | updated 14/8/2017

10 Special

Awards from

Russian

Government,

Software System for Detecting


with Adjustable 7 Readability Level.

Researcher


and Innovation & Technology

Exhibition (ITEX 2007), 18-20

May 2007 Kuala Lumpur,

Malaysia.

2007

11. Bronze Medal Software System for Detecting


with Adjustable Readability Level:

Researcher

Pameran Rekacipta

dan,Penyelidikan dan Inovasi,

UPM

2006

12. Gold Medal

and Henry

Goh Special

Award for

Environmental

Innovation

(Renewable

Energy


Injection Vehicle (CNGDI)

Researcher


Innovation, Industrial Design

and Technology Exhibition

(ITEX 06), 19-21 May 2006

Kuala Lumpur, Malaysia.

2006

13 Gold Medal

and Special

Awards from

The

Association of

Polish

Inventor,

Poland.


Injection Vehicle (CNGDI)

Researcher

55th World Exhibition of

Innovation, Research and New

Technology 2006, (Eureka-

Onnova 06), Brussels,Belgium,

23-27 Nov 2006

2006

14. Best Design ROBOCON Researcher National ROBOT Competition

2005, 22-23 April 2005,

MOHE ROBOCON 2005

2005

15. Schorlarship Bachelor of Electrical and Electronic

Engineering

Jabatan Perkhidmatan Awam,

Malaysia

1996

16 SLAB Master in Electrical Kementerian Pendidikan

Malaysia

1999

17 SLAB Doctor of Philosophy Kementerian Pengajian Tinggi 2005

5 | updated 14/8/2017

G. TEACHING ACTIVITIES

No. Code and Name of Courses Credit

Hour

Number of

Students

Teaching

Assessment

Semester/Academic Year

1 KEE 3011:Electrical and

Electronic Technology

3(2+1) 84 4.19 Semester 2. 2001/2002

2 KEE3402: Control System 3(3+0) 69 3.95 Semester 2. 2001/2002

3 Kee 3909 A Final Year Project 3(0+3) 59 - Semester 2. 2001/2002

4 Kee 3909 B Final Year Project 3(0+3) 59 - Semester 1. 2002/2003

5 Kee 3901 Laboratory of Electrical

and Electronic I

1(0+1) 60 3.88 Semester 1. 2002/2003

6 KEE 3011: Electrical and


3(2+1) 80 4.59 Semester 1. 2002/2003



4(3+1)T 66

UPM -

Bintulu

- Semester 2. 2002/2003

8 Kee 3909 A: Final Year Project 3(0+3) 35 - Semester 2. 2002/2003

9 KEE3402: Control System 3 ( 3+0) 29 4.39 Semester 2. 2002/2003

10 Kee 3904: Laboratory of Control

System IV

2( 0+2) 36 - Semester 2. 2002/2003



3(2+1) 41 4.98 Semester 1. 2003/2004

12 KEE3909 B : Final Year Project 3(0+3) 35 3.88 Semester 1. 2003/2004

13 Kee 3901: Laboratory of Electrical

and Electronic I

1(0+1) 79 3.69 Semester 1. 2003/2004

14 KEE 4411 Computer Aided

Control System Design

3( 3+0) 46 4.18 Semester 2. 2003/2004

15 KEE 3408 : Microprocessor 3(3+0) 31 4.55 Semester 2. 2003/2004

16 ECC 3004 Engineering Statistic 3( 3+0) 73 - Semester 1, 2008/2009

17 EEE 3908 Electric and Electronic

Laboratory III

(0+1) 66 - Semester 1, 2008/2009

18 EEE 4411 Computer Aided

Control System Design

3( 3+0) 24 4.4 Semester 2, 2008/2010

19 EEE 3908 Control System

Laboratory II

(0+1) 16 Semester 2, 2008/2010

20 EEE 4403 Control System Design

3( 3+0) 21

4.33 Semester 1, 2009/2010

21 ECC 3004 Engineering Statistic 3( 3+0) 58 4.68 Semester 1, 2009/2010

22 EEE 4405 Embedded Control

System

3( 3+0) 16 4.40 Semester 2, 2009/2010

23 EEE 3908 Control System

Laboratory II

(0+1) 11 - Semester 2, 2009/2010

24 EEE 4403 Control System Design

3( 3+0) 10

4.76 Semester 1, 2010/2011


26 EEE 4405 Embedded Control

System

3( 3+0) 10 4.89 Semester 2, 2010/2011


28 EEE 4403 Control System Design 3( 3+0) 21 4.96 Semester 1, 2011/2012



31 EEE 4403 Control System Design 3( 3+0) 21 4.96 Semester 2, 2011/2012

32 EEE 3401 Control System 3( 3+0) 22 4.41

Semester 2, 2012/2013

6 | updated 14/8/2017

33 EEE 5900 Advanced Modelling

and Simulation

3( 3+0) 10 4.69 Semester 2, 2012/2013

34 EEE 5900 Advanced Modelling

and Simulation

3( 3+0) 7

4.60 Semester 1, 2013/2014

35 EEE 3999A Final Year Project (2+0) 53 4.45 Semester 1, 2013/2014

36 EEE 4404 Intelligence Control

System

3( 3+0) 13 4.84 Semester 2, 2013/2014

37 EEE 3999B Final Year Project (4+0) 53 4.30 Semester 2, 2013/2014

38 EEE 4404 Intelligence Control

System

3( 3+0) 10 4.50 Semester 1, 2014/2015

39 EEE 3999A Final Year Project (2+0) 51 4.28 Semester 1, 2014/2015

H. SUPERVISION OF STUDENTS

Student Supervision - PhD

Main Supervisor

No. Name Title Status

1. Tengku Azman Tengku

Mohd (GS37906)

Development of Hybrid Artificial Intelligence for

Energy Management of EV

Ongoing

CE passed-

ongoing

2. Ali Mohsen Al-Sabari

(GS46828)

An optimized Neuro Fuzzy controller Based Energy

Management Strategy on Battery/Ultra capacitor

Hybrid Electric Vehicles

Ongoing

3. Muhammad Taqiuddin

Abdul Rahman

(GS47364)

Hybrid Artificial Intelligence for Multiple-Cells of

Battery Balancing System

Ongoing

Co-Supervisor


1. Hoon Yap, GS37714) Multilevel Inverter for Power Quality Mitigation Graduated

2. Norhafeezah Kamarudin Development of Lifting Model for Malaysia

Population

On going

3. Ahmed Hassan

Mohamed- GS32088

Collision Prediction based Reinforcement Learning for

mobile robot navigation in dynamic environment

Submitted

4.

Co-Supervisor- other universities

No. Name Title University

1. Mohd Kamal Hat

(GE130114) - ongoing

Hybrid Algorithm for Traction

Motor Control of EV

Universiti Tun Hussein Onn

Malaysia

Student Supervision – Master

7 | updated 14/8/2017

Main Supervisor

1. Aiman Razak GS39806 Fuzzy Logic Design for Lithium Yttrium Battery

Balancing

Ongoing

2. Hussein Taleghani

GS39533

Application of Genetic Algorithm for Regenerative

Braking of Electric Vehicle

Submitted

3 Batool Abdulsamad

Abbood Rasani Alkha

Integrated Multi-Surface Sliding Mode Control of

Electronic Wedge Brake (EWB) for antilock Braking

System (ABS)

Graduated

4. Anith Khairunnisa Binti Ghazali- GS45246

Design of Model Reference Adaptive Control for Power Module in Nuclear Reactor System

Submitted

5. Azhar Omar (GS32225) Lightning Severity Classification Utilizing the

Meteorological Parameters: A Neural Network

Approach

Graduated

6. Ameer M.F Sider

(GS34664)

Development of Brake by Wire (BBW) System for

Electric Vehicle- power reduction

Graduated

7. Mohd Hafiz Bin Mohd

Nordin

Development of fault detection system of air-fuel ratio

control using HiL

Terminated

8. Adel Amiri Bahmanshiri

(GS34284)

Particle Swarm Optimization (PSO) Technique of

Current Tracking Controller for Electric Power

Assisted Steering (EPAS) System

Graduated

9 Wan Mohd Khidhir

Abdul Aziz (GS37379)

CAN communication for Electric vehicle control panel Terminated

10 Malathi Naidu A/P

Chandran (GS32398)

Development of intelligent Water treatment control for

Indah Water

Terminated

11 Abdul Rahman Abdul

Kareem Sattoori Al-

Shanoon (GS39676)

Development of precise control of Medical instrument

controller with PIC

Graduated

Co-Supervisor


1. Maged Saleh Saeed Al-

Quraisy (Gs35353)

Classification of Ankle Joint Movements Based on

Electromyography

Signal For Rehabilitation Robot Applications

Graduated

2. Abdul Rahman

Andulkareem Sttoori

(GS39676)

Development of Medical Instrument Graduated

3. Nursaida Mohamad

Zaber (Gs37902)

Development of Radar position control Gradudted

4. Mohammad Seifi

(GS31812)

Design, Modeling And Simulation of Hybrid Microgrid

with Smart Demand Side Management

Graduated

5. Ahmed Abdulelah

(GS34940)

Develop a Real-Time Tuning Algorithm for Inaccurate

Model Using Modified Hill Climbing Approach

Graduated

6. Umi Kalsom Bt

Mohamad Yusof

(GS36373)

Development of E-Nose Herbs Recognition System

Based on Artificial Intelligence Technique

Graduated

7. Balbir Shah @ Mohd

Faddullah

Comparative Performance of On-Off, PID and Fuzzy

Logic Controllers pH Process in Boiler Application

Graduated

8. Ahmad Abdusalam

Firjani

A Web-Based Control and Monitoring System Graduated

8 | updated 14/8/2017


9. Yousef A. Ettomi Ali Development of a Micro-controller Based Closed Loop

Speed Control System of DC Motor.

Graduated

10 Maspaliza Bte Azri Design and Development of a Fault Detection System

for symbol Printedon Integrated Circuit Chip by

Graduated

Co-Supervisor- other universities

No. Name Title University

1. Nor Aziah Mohd

Azubir- Graduated

Development of State Flow Algorithm for

Power Consumption of EV

Universiti Teknologi

Malaysia, CAIRO,

Kuala Lumpur

1. Rabiatul Adawiyah

Abu Hanifah

Graduated

Design and Development of Intelligent Electric

Power Assist Steering (EPAS) System for

Electric Vehicle.

Dept of Mechatronic

Engineering, Kulliyah

of Engineering, IIUM

I. PUBLICATIONS

a. Cited Journals

1. T.A.T. Mohd1,M.K. Hassan1,2, Ishak Aris1, Azura C.S.1 and B.S.K.K Ibrahim3, Application of

Fuzzy Logic in Multi-Mode Driving for a Battery Electric Vehicle Energy Management,

International Journal on Advanced Science, Engineering and Information Technology, Vol. 7

(2017) No. 1, pages: 284-290, DOI:10.18517/ijaseit.7.1.1960. (Scopus)

2. Y. Hoon, M.A.M. Radzi, M.K. Hassan, and N.F. Mailah, “A Self-Tuning Filter-Based Adaptive

Linear Neuron Approach for Operation of Three-Level Inverter-Based Shunt Active Power

Filters under Non-Ideal Source Voltage Conditions,” Energies, vol. 10, no. 5, pp. 1-28, March

2017. (2016 IF = 2.262, Q2)

3. Y. Hoon, M.A.M. Radzi, M.K. Hassan, and N.F. Mailah, “Neutral-point Voltage Deviation

Control for Three-level Inverter-based Shunt Active Power Filter with Fuzzy-based Dwell Time

Allocation,” IET Power Electronics, vol. 10, no. 4, pp. 429-441, 31 March 2017. (2016 IF =

3.547, Q1)

4. Y. Hoon, M.A.M. Radzi, M.K. Hassan, and N.F. Mailah, “A Refined Self-Tuning Filter-Based

Instantaneous Power Theory Algorithm for Indirect Current Controlled Three-Level Inverter-

Based Shunt Active Power Filters under Non-sinusoidal Source Voltage Conditions,” Energies,

vol. 10, no. 3, pp. 1-20, March 2017. (2016 IF = 2.262, Q2)

5. N. F. M. Radzi*, A. Che Soh, A. J. Ishak, M. K. Hassan, U. K. Mohamad Yusof, Aromatic Herbs

Classification by Using Discriminant Analysis Techniques. Indonesian Journal of Electrical

Engineering and Computer Science,Vol. 5, No. 3, March 2017, pp. 530 ~ 535

6. Y. Hoon, M.A.M. Radzi, M.K. Hassan, and N.F. Mailah, “A Simple Neutral-Point Voltage

Deviation Minimization Method for Three-Level Inverter-Based Shunt Active Power Filter,”

International Journal of Simulation: Systems, Science and Technology, vol. 17, no. 41, pp. 33.1-

33.6, 2016. (Scopus)

7. Y. Hoon, M.A.M. Radzi, M.K. Hassan and N.F. Mailah, “DC-Link Capacitor Voltage Regulation

for Three-Phase Three-Level Inverter-Based Shunt Active Power Filter with Inverted Error

Deviation Control,” Energies, vol. 9, no. 7, pp. 1-25, July 2016. (2016 IF = 2.262, Q2)

8. M. K. Hassan,N. F. H. Eko and S. Shafie, Tuberculosis Bacteria Counting Using Watershed

Segmentation Technique, Pertanika J. Sci. & Technol. 25 (2): 275 - 282 (2017)

9 | updated 14/8/2017

9. Findi, Ahmed H.M, Marhaban M.Hamiruce, Raja Kamil. Mohd Khair Hassan, Collision

Prediction Based Q-Learning for Mobile Robot Navigation in Unknown Dynamic Environments,

Journal of Compoutational and Theroretical Nanoscience (2016)

10. Findi, Ahmed H.M, Marhaban M.Hamiruce, Raja Kamil. Mohd Khair Hassan, Collision

Prediction Based Genetic Network Programming-Reinforcement Learning for Mobile Robot

Navigation in Unkwon Dynamic Environment, Journal of Electrical & Technology (JEET) (2016)

11. Rabiatuladawiyah Abu Hanifah, Siti Fauziah Toha, Mohd Khair Hassan, Salmiah Ahmad. Power

reduction optimization with swarm based technique in electric power assist steering system.

Energy 102 (2016) 444-452 . I.F 5.153 (Q1)

12. Batool Abdulsamad Alkharasani, Mohd Khair Hassan ,Rini Akmeliawati, Ribhan Zafira , Siti

Anom Ahmed, PID-Sliding Surface based Sliding Mode Controller for Anti-lock Braking system

of Electric Vehicle. Advanced Science Letters, Adv. Sci. Lett. 22, 2734–2737 (2016)

ISSN: 1936-6612 (Print): EISSN: 1936-7317

13. T.A.T. Mohd1, M.K. Hassan1,2, Ishak Aris1,Azura C.S1 and B.S.K.K. Ibrahim3 , A Review of

Energy Management System in Battery Electric Vehicle with Hybrid Electrical Energy Source,

FEIIC International Journal of Engineering and Technology, Vol. 13, No.1, 2016, pp. 105-113.

14. Y. Hoon, M.A.M. Radzi, M.K. Hassan, N.F. Mailah, and N.I.A. Wahab, “A Simplified

Synchronous Reference Frame for Indirect Current Controlled Three-level Inverter-Based Shunt

Active Power Filter,” Journal of Power Electronics, vol. 16, no. 5, pp. 1964-1980, September

2016. (2016 IF = 1.047, Q3)

15. Y. Hoon, M.A.M. Radzi, M.K. Hassan and N.F. Mailah, “Enhanced Instantaneous Power Theory

with Average Algorithm for Indirect Current Controlled Three-Level Inverter-Based Shunt Active

Power Filter under Dynamic State Conditions,” Mathematical Problems in Engineering, vol.

2016, pp. 1-12, 2016. (2016 IF = 1.454, Q3)

16. T. A. T. Mohd, M. K. Hassan, Ishak Aris, A. Che Soh, B. S. K. K. Ibrahim, and M. K. Hat,

Simulation Based Study of Electric Vehicle Parameters, ARPN Journal of Engineering and

Applied Sciences, VOL. 10, NO 19, OCTOBER, 2015.

17. Abdulrahman Abdulkareem S. Al-Shanoon, Siti Anom Ahmad and Mohd. Khair B. Hassan ,A

Susceptibility Study on Piezoresistive Sensor in a Pliable and Rigid Robotic Claws Model, ARPN

Journal of Engineering and Applied Sciences, VOL. 10, NO. 19, OCTOBER 2015,9106-9113

18. Bahmanshiri Adel and Mohd Khair Hassan, Optimal Design of Electric Power Assisted Steering

(EPAS) System Using Particle Swarm Optimization (PSO), Optimal Control Applications and

Methods, 2015 (Reviewed) (IF 1.535

19. Ameer Sedera, Mohd Khair Hassan,Mohd Amran Bin Mohd Radzi and SF Tohad, Mathematical

Design and Analysis of Anti-Lock Brake System for Electric Vehicle Based On Brake-By-Wire

Technology, International Journal of Electric and Hybrid Vehicles; Vol.7, No.4, 2015, 303-322 -

20. T. A. T. Mohd, M. K. Hassan, and WMK. A. Aziz, Mathematical Modeling and Simulation of

Electric Vehicle using MATLAB-Simulink, Journal of Mechanical Engineering and Sciences,

2015, Journal of Mechanical Engineering and Sciences (JMES),Vol. 8, pp. 1312-1321, June

2015

21. U.K. Mohamad Yusof, A. Che Soh, N.F. M. Radzi, A.J. Ishak, M.K. Hassan, S.A. Ahmad, S.

Khamis. Selection of feature analysis electronic nose signals based on the correlation between

gas sensor and herbal phytochemical. Australian Journal of Basic and Applied Sciences, 9(5)

March 2015, Pages: 360-367

22. Mohd Hafiz Mohd Nordin, Mohd Khair Hassan, Azura Che Soh, Mohd Amran Mohd Radzi,

Hardware-In-Loop of Fault Detection system for Air-Fuel Ratio Control ,Applied Mechanics and

Materials Vol. 663 (2014) pp 233-237

10 | updated 14/8/2017

23. Nor Aziah Mohd Azubir, Mohd Khair Hassan, Hairi Zamzuri, Saiful Amri Mazlan, Development

of PROTON Electric Vehicle Control Unit (eVCU) using State Machine Deterministic Rule-

Based Approach Applied Mechanics and Materials Vol. 663 (2014) pp 532-538

24. Siti Fauziah Toha, Nor Hazima Faeza,Nor Aziah Mohd. Azubair, Nizam Hanis, Mohd. Khair

Hassan, Babul Salam KSM Ibrahim,Lithium Iron Phosphate Intelligent SOC Prediction for

Efficient Electric Vehicle, Advanced Materials Research Vols. 875-877 (2014) pp 1613-1618.

25. Seyed Mohammad Hussein S, Siti A. Ahmad, Azura Che Soh, Mohd K Hassan, Asnor J

Ishak.The Combined Statistical Minimized Point Distance (SMPD) and Texture Based Image

Processing Techniques and Their Applications in Plant Species Recognition. Submitted to IET

Image Processing. 2014

26. Mohammed Ahmed, Samsul Bahari B Mohd Noor, Mohd Khair B Hassan, Azura Bt Che Soh. A

Review of Strategies for Parabolic Antenna Control, Australian Journal of Basic and Applied

Sciences, 8(7) May 2014, Pages: 135-148

27. Nor Hafeezah Kamarudin, Siti Anom Ahmad, Mohd Khair Hassan, Rosnah Mohd Yusuff,Siti

Zawiah Md Dawal: A Review of the NIOSH Lifting Equation and Ergonomics Analysis,

Advanced Engineering Forum Vol. 10 (2013) pp 214-219.

(DOI:10.4028/www.scientific.net/AEF.10.214)

28. Seyed Mohammad Hussein S, Siti A. Ahmad , Azura Che Soh, Mohd K Hassan, Asnor J Ishak

Introducing New Statistical Shape Based and Texture Feature Extraction Methods in The Plant

Species Recognition System. International Journal of Engineering and Technology, Vol.10, No.

2, 56–61, 2013

29. M.Seifi, A.che Soh, N.I.Abd.Wahab, M.K.Hassan, Modeling of PV Standalone Microgrid Based

on IEEE 1562-2007,1361-2003 and 1013-2007. International Review on Modeling and

Simulations (I.R.E.M.O.S), vol 6,N2, 2013 pp 515-525.

30. M.K Hassan, N.A.M. Azubir, Nizam.H.M.I, S.F Toha, B.S.K.K Ibrahim , Optimal Design of

Electric Power Assisted Steering System (EPAS) Using GA-PID Method , Procedia Engineering

41 (2012) 614-621.

31. B.S.K.K.Ibrahim, N.Aziah.M.A, S. Ahmad, R. Akmeliawati, Nizam H.M.I,A.G.A.Muthalif,

S.F.Toha and M.K.Hassan, Fuzzy-based Temperature and Humidity Control for HVAC of

Electric Vehicle, Procedia Engineering 41 ( 2012 ) 904 – 910.

32. Mohd Khair Hassan and Ishak Aris, Modeling brake torque of CNGDI using two stage

regression technique , International Review of Mechanical Engineering (IREME),2012. Vol. 6

n. 3, pp. 621-624 .

33. Mohd Khair. H, Aishawarya.K, Ribhan Zafira A.R and Siti Anom.A, Design a PID Controller

for a Constant Speed of Combustion Engine, Australian Journal of Basic and Applied Sciences,

5(12): 1586-1593, 2011

34. M.K. Hassan, R.Z. Abdul Rahman, A,Che Soh, M.Z.Z Ab Kadir, Lightning Strike Mapping for

Peninsular Malaysia Using Artificial Intelligence Techniques. Journal of Theoretical and

Applied Information Technology (JATIT) 34(2), 2011, 202-214.

35. Azura Che Soh, Mohd Khair Hassan, Ribhan Zafira Abdul Rahman, A Fuzzy Classificier System

for Malfuntion Traffic Light System Classification, Journal of Theoretical and Applied

Information Technology (JATIT) 34(2), 2011, 226-240.

36. Mohd.Khair, H and Ishak, .A. The Effect of the Ignition Dwell Time at Constant Speed for

CNGDI Engine, Australian Journal of Basic and Applied Sciences, 4(10): 4691-4694, 2010

37. M.K Hassan, I.Aris, S.Mahmod, R. Sidek , Influence of injection and ignition of CNG fuelled

direct injection engine at constant speed, Australian Journal of Basic Applied Science, 4(10):

4870-4879, 2010, ISSN 1991-8178, 2010.

11 | updated 14/8/2017

38. Masjuki H.Hassan, M.Abul Kalam and TM Indra Mahlia, Ishak Aris and M.Khair Nizam,

Experimental Test of aNew Compressed Natural Gas Direct Injection Engine. Energy and Fuels

2009, Vol 23, 4981-4987, Scopus I.F 2.79. Q2

b. Non-cited Journal

1. G. R. Lai, A. Che, Soh, , H. Md. Sarkan,,R. Z. Abdul Rahman, M. K. Hassan, Controlling Traffic

Flow in multilane0isolated using ANFIS approach techniques, Journal of Engineering Science

and Technology Vol. 10, No. 8 (2015) 1009 – 1034.

2. Ahmed Abdulelah, Azura Che Soh,MohdKhair Hassan and SamsulBahariMohd Noor.

Controlling the Pitch and Yaw Angles of Twin Rotor MIMO System in Simulation Based Platform

using Fuzzy Logic. Open Journal of Artificial Intelligence , OJAI 2014, (1):1-6

(DOI:10.12966/ojai.02.01.2014)

3. Mohd Azubir N.A, Md.Idris N.H, Ahmad S, Akmal R.A, Toha S.F, Ibrahim B.S.K.K , Hassan

M.K. Development of Control Strategy on Segregation of HVAC Energy Efficiency as Non

Propulsion Electrical Hotel Load in EV. Journal of Engineering. Vol 4. Pg 14-20. 2012

4. Mohd.Khair Hassan, Ishak Aris, Khairul Nizam Zainuddin and Nik Anis Alina, Torque and

Power of CNGDI Engine with Two Different Piston Crown Shapes, Journal of Applied Sciences

Research 5(8): 949-954, 2009.

5. M.K Hassan, I.Aris, S.Mahmod, R. Sidek An experimental result of exhaust emission

concentration relative to various injection timing of CNG fuelled direct injection engine.

European Journal of Scientific Research, ISSN 1450-216X Vol.25 No.3 (2009), pp.405-416.

6. Wan Zuha A.H.,Zulkifli A.R., Samsul B.M.N, M.Khair H., Liakot A. and Syed A.R, Doppler

Effect Method For Speed Trap Detector. Journal of Industrial Technology Vol.14 (2) 2005, 97-

111.

7. M.K Hassan, A. Mustaffa and Norhayati , A Comphehensive GUI with MATLAB Based for

Classical, Modern and Electric Circuit Analysis, Engineering Transactions, Mahanakorn

University of Technology, Vol 7, No 1(16), Jan-June 2004, 57-75.

8. Azura Che Soh, Mohd Khair Hassan, Mohd Amran Mohd Radzi and Li Hong Fay, Development

Of Fuzzy Logic Controller For Movement Control Of Robotic System, Journal of Industrial

Technology Vol.14 (2) 2005, 113-137.

9. I Aris, M.K. Hassan, I.Mat, K.Nizam,N.A.Alina,R.K.Zakiah,R.Sidek, S.Mahmood, Model-

Driven Electronic Control Unit with Real-Time Embedded Target, Engineering Transactions,

Mahanakorn University of Technology, Thailand.,Vol.8,No.1(18),Jan-June 2005, 62-80.

10. Ibrahim Mat, Ishak Aris, Mohd Khair, Roslina Mohd. Sidek, , Nik Anis Alina and Syed Malik,

Electronic Control Unit for Vehicles:Issues and the Way Forwards, Journal of Industrial

Technology, SIRIM Berhad. Vol.15 (1) 2006, 73-85.

11. Mohd Liakot Ali, Mohd Khair Hassan, Wan Zuha Wan Hasan and Tan Yar Loon, Systhesis of 8-

bit smart Card Microprocessor Using Harvard Architecture and RISC, Journal of Industrial

Technology , Vol 14 (1) 2005, 37-58.

c. Book(s)

e. Proceeding(s)

12 | updated 14/8/2017

1. M. K. Hassan, T. A. T. Mohd, A Review of Energy Management System in Battery Electric

Vehicle with Hybrid Electrical Energy Source, International Conference on Engineering

Education 2015, Madinah, Kingdom of Saudi Arabia, 29-30 November 2015

2. N. Mohamad Zaber, A.J Ishak, A. Che Soh, M.K. Hassan, “Designing PID Controller for

Position Control with Disturbance”, 2015 International Conference on Computer,

Communication, and Control Technology , 21 - 23th April, 2015, Kuching, Sarawak, Malaysia.

3. A.Abdullelah,A.Che Soh, N.A. Abdullah, M.K. Hassan and S.B.Mohd Noor, Simulated Real

Time Controller Using Modified Hill Climbing Algorithm on Fixed Wing Airplane, The 2015

10th Asian Control Conference (ASCC 2015), May 31-June, 2015, Kota Kinabalu Sabah,

Malaysia.

4. M.K Hassan, S.F Toha, B.S.K.K Ibrahim, N.Aziah .M.A, Power Consumption Efficiency of

Electric Power Assisting Steering System for Electric Vehicle: MBD Approach. 2nd

International Symposium on Applied Engineering and Sciences (SAES2014), Kyushu Institute

of Technology, Japan 20th – 21th Dec. 2014.

5. U. K. Mohamad Yusof, A. Che Soh, A. J. Ishak, M. K. Hassan, K.K.Chow, “Selection of Feature

Analysis Electronic Nose Signals Based on the Correlation between Gas Sensor and Herbal

Phytochemical”, 2nd International Symposium on Applied Engineering and Sciences 2014

(SAES 2014), 20-21 Dec 2014, Japan.

6. N. Mohamad Zaber, A.J Ishak, A. Che Soh, M.K. Hassan, R.Z. Abdul Rahman and Z. Zainal

Abidin, “Control Positioning of Radio Telescope using PID Controller with Varying Parameters

for High Precision Output”, The 6th International Conference On Postgraduate Education

(ICPE-6 2014), 17-18 Dec 2014, UTeM, Melaka

7. Mohd Rafiuddin Mohd Nordin, Ribhan Zafira Abdul Rahman, Mohd Khair Hassan, A. Che Soh

and Siti Anom Ahmad, ”Identify The High And Low RFI Level Base On Image Processing With

Gray Level Co-Occurrence Method”, World Research and Innovation Convention of

Engineering & Technology (WRICET), 25-26 Nov 2014, Putrajaya, Malaysia.

8. Mohammed Ahmed, Samsul Bahari Mohd Noor, Mohd Khair Hassan, Azura Che Soh,

“Parabolic Antenna Control Using The T-S Type Fuzzy Logic”, The Second International

Conference on Defence and Security Technology(DSTC 2014), 24-25 September 2014, Kuala

Lumpur.

9. Mohammad Seifi, Azura Che Soh, Mohd Khair Hassan and Noor Izzri Abd. Wahab. An

Innovative Demand Side Management for Vulnerable Hybrid Microgrid. 2014 IEEE Innovative

Smart Grid Technologies Conference- Asia (ISGT ASIA), 20-23 May 2014, Kuala Lumpur,

Malaysia.

10. Maged S.Saeed, Asnor J. Ishak, Siti A.Ahmad, Mohd K. Hassan, Design A Low Cost

Electromyography Amplifier Circuit. 1st Mini Symposium on Artificial Intelligence and

Robotics, Kuala Lumpur, Malaysia,11 December 2013.

11. M.Azhar Omar, M.Khair Hassan, Azura Che Soh, M.Z.A.Ab.Kadir. Lightning Severity

Classification Utilising the Meteorological Parameters: A Neural Network Approach. 2013 IEEE

International conference on Control System, Computing and Engineering, 29 Nov-1 Dec, 2013,

Penang Malaysia.

12. Chow Kar Kit, Azura Che Soh, Umi Kalsom Mohammad Yusuf , Asnor Juraiza Ishak,Mohd

Khair Hassan and Shamsul Khamis. E-Nose Herbs Recognition System based on Artificial

Neural Network Technique. The 2013 IEEE International Conference on Control System,

Computing and Engineering, 29 Nov - 1 Dec 2013, Penang, Malaysia.

13. N. Aziah M.A, Nizam H.M.I, S. Ahmad, R.Akmeliawati , S. F. Toha, B.S.K.K. Ibrahim, M.K.

Hassan, Control Strategy of Segregation on HVAC Energy Efficiency as Non Propulsion

13 | updated 14/8/2017

Electrical Hotel Load in EV , 593-597, , 2012 IEEE International Conference on Power and

Energy (PECon), 2-5 December 2012, Kota Kinabalu Sabah.

14. B.S.K.K. Ibrahim, N.A.M. Azubir, N.H.M. Ishak, M.K. Hassan, S.F. Toha, M.A.Z. Abidin, H.F.

Ismail and H. Zamzuri. PI-Fuzzy Logic Control for 3 Phase BLDC Motor for Electric Vehicle

Application. Conference of 2012 UKSim-AMSS 6th European Modelling Symposium

15. Mohd Khair Hassan , Ishak Aris, Modeling Brake Torque of CNGDI Engine Using Two-Stage

Regression Technique. Regional Conference on Automotive Research (ReCAR) 2011, 14-15th

December 2011. Kuala Lumpur, Malaysia

16. Mohd Khair Hassan , Ishak Aris, Roslina Sidek and Senan Mahmod Power and torque

comparison FOR CNG and Petrol Using LES software.World Engineering Congress 2010, 2nd –

5th August 2010, Kuching, Sarawak, Malaysia Conference on Engineering and Technology

Education.

17. M.K Hassan, I.Aris, S.Mahmod and R. Sidek, Exhaust gas concentration of CNG fuelled direct

injection engine at MBT timing, International Advanced of Technology Congress, 2009, PWTC,

Kuala Lumpur, 3-5 November 2009.

18. M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim,

A.Ishak and M.Khair, A.Shahrir and A.Yusoff, Experimental Test of a New Compressed Natural

Gas Engine With Direct Injection, SAE paper no. 2009-01-1967, USA.

19. M.A. Kalam, H.H. Masjuki, M. Redzuan, T.M.I. Mahlia, M. A. Fuad, M. Mohibah, Ku. Halim,

A.Ishak and M.Khair, A.Shahrir and A.Yusoff, Development and Test of a New Catalytic

Converetr for Natural Gas Fueeld Engine, SAE paper no: 2008-01-1550,USA.

20. M.K Hassan, I.Aris, S.Mahmod, R. Sidek, K.N. Zainuddin, N.A.Alina, H.H Masjuki, M.

Redzuan, M.A.Kalam,The Influence of Fuel Injection Timing Towards Exhaust Emissions in

Compressed Natural Gas Direct Injection (CNGDI) Engine-An Experimental Study, 3rd Brunei

International Conference on Engineering and Technology, BICET2008, 3-4 Nov.2008

21. M.K Hassan, I.Aris, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan,

M.A. Kalam, The Effects of Ignition and Injection Timings On Compressed Natural Gas Direct

Injection (CNGDI) Multicylinder Engine, 1st Engineering Conference, Energy and Environment,

27-28 December 2007, Kuching Sarawak.

22. I.Aris, M.K Hassan, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan,

M.A. Kalam, Experimental Test and Simulation of Compressed Natural Gas Direct Injection

(CNGDI) Single cylinder Engine, 1st Engineering Conference, Energy and Environment, 27-28

December 2007, Kuching Sarawak.

23. Mohd Khair Hassan, Ishak Aris, Jasronita Jasni, Senan Mahmod, roslina Sidek, Hashim Hizam,

Comparative Study of The Potential of Campro 1.6L Engine Fuelled by Compressed Natural

Gas, World Engineering Congress 2007 (WEC 2007), 5-9 August, Penang, Malaysia.

24. Mohd Khair Hassan, Ishak Aris,K.N. Zainuddin, H.H Masjuki , M. Redzuan, M.A.Kalam

Performance Analysis Of 1.6l Campro Engine Using Motec And OEM Engine Control Unit,

Proc.of the 2nd International Engineering Convention 2007 (IntEC2007), 9-14 Mac 2007. Jeddah,

Arab Saudi.

25. I.Aris, M.K. Hassan, R.Sidek, S.Mahmod, I.Mat, K.N.Zainuddin, N.A.Othman, R.K.Z.Sahbudin.

Trend in Electronic Control Unit Development With Real-Time Embedded Target, Proc. Of the

Brunei International Conference of Engineering and Technology (BICET) 2005, Brunei

Darussalam, 15-18 August 2005.

26. Mohd Khair Hassan, Ishak Aris, Roslina Sidek, Senan Mahmod, Model-Based Approach with

Real Time Embedded Target for Rapid ECU Development: An Overview, Proceeding of the

14 | updated 14/8/2017

Jordan International of Electrical and Electronic Engineering Conference (JIEEEC) 2005,15-17

Nov,2005. Amman, Jordan.

27. Khairul Nizam, Mohd Khair Hassan, Ishak Aris, Ibrahim Mat, Nik Anis Alina, Issues and

Challenges of ECU Development, RENTAS Symposium 2004, 24-25 Nov 2004, Faculty. Of

Engineering. UPM.

28. Ishak Aris, Maaspaliza Azri, Zainab Hasan, M. K. Hassan, M. Khalid, S. M. Amin and H. A.

Cyril, “Development of Software System for Detecting Defective Symbols on Integrated Circuit

Chip with Adjustable Readability Level”, CD Proceeding of the 9th International Conference on

Mechatronics Technology (ICMT), Kuala Lumpur, 5-8 December 2005.

29. Azura C. S., M.K. Hassan, Li Hong Fey, Intelligent Movement Control For Robots Using Fuzzy

Logic, International Conference Artificial Intelligence in Engineering and Technology (ICAET

2004), 3-5 Aug. 2004, Sabah ,Malaysia.

30. Mohd Khair Hassan, Khairul Nizam Zainuddin, Development Of Control Strategy Of Ecu For

CNG–Di Engine , CNG-DI and Transmission Workshop, 21-23 Dec 2004, Hotel Equtorial,

Melaka.

31. Mohd.Khair Hassan, Ribhan Zafira Abdul Rahman, Norhayati Hamid, Mohd Liakot Ali,

Learning Aid for Electric Circuits Analysis with MATLAB based GUI, Proceeding of The

Seventh Triennial AEESEAP Conference, Univ.Malaya.8,9 Dec 2003, pp 233.

32. Y.S.E.Ali, SBM Noor, S.M Bashi and M.K Hassan, Microcontroller Performance for DC Motor

Speed Control, National Power and Energy Conference, Equtorial, Bangi.2003

33. Ikmal Arif Abd. Jalal, Mohd Khair Hassan, Mohd Amrallah Mustafa, Smart Lighting

Management System, SCOReD 2003, Palm Garden Renaissance Hotel, Putrajaya. 25-26 August

2003.

34. Y.S.Ettomi, S.B.M.Noor, S.M.Bashi and M.K. Hassan, Microcrontroller Based Adjustable

Closed-Loop DC Motor Speed Controller, SCOReD 2003, Palm Garden Renaissance Hotel,

Putrajaya. 25-26 August 2

35. Zulkifli Abd Rahman, Wan Zuha Wan Hasan, Samsul Bahari, Mohd Khair Hassan, Doppler

Effect Method For Speed Trap Detector, SCOReD 2003, Palm Garden Renaissance Hotel,

Putrajaya. 25-26 August 2003.

36. Mohd Khair Hassan, Syed Malik Faizal, EMS Applications and Components. Direct Injection

Technology and EMS Development Workshop, 23/9- 24/9/ 2003, Hotel Residence, Putrajaya,

Malaysia

37. Mohd Khair Hassan, Samsul Bahari Mohd Noor, Brian Dyer, Mathematical Model Of Pontoon

System, Proc of World Engineering Congress 2002, 22-24 July 2002, Kuching Sarawak,

Malaysia.

f. Seminar Papers Presented (orally)

1. M. K. Hassan, T. A. T. Mohd, A Review of Energy Management System in Battery Electric

Vehicle with Hybrid Electrical Energy Source, International Conference on Engineering

Education 2015, Madinah, Kingdom of Saudi Arabia, 29-30 November 2015

2. T.A.T. Mohd, M.K. Hassan, Ishak Aris, B.S.K.K. Ibrahim, and M.K. Hat. Simulation based study

of electric vehicle parameter, Int. Conf. of Electrical and Electronic Engineering (IC3E), Melaka.

10-11 August, 2015.

3. M.K Hassan, S.F Toha, B.S.K.K Ibrahim, N.Aziah .M.A, Power Consumption Efficiency of

Electric Power Assisting Steering System for Electric Vehicle: MBD Approach. 2nd

15 | updated 14/8/2017

International Symposium on Applied Engineering and Sciences (SAES2014),Kyushu Institute

of Technology, Japan 20th – 21th Dec. 2014.

4. M.Azhar Omar, M.Khair Hassan, Azura Che Soh, M.Z.A.Ab.Kadir. Lightning Severity

Classification Utilising the Meteorological Parameters: A Neural Network Approach. 2013 IEEE

International conference on Control System, Computing and Engineering, 29 Nov-1 Dec, 2013,

Penang Malaysia.

5. M.K Hassan, N.Aziah .M.A, Nizam.H.M.I, A.G A Mutalib, S.F Toha, B.S.K.K Ibrahim. A

Comparative Study of Power Consumption of Electric Power Steering System, 180-184, 2012

IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota

Kinabalu Sabah.

6. Mohd Khair Hassan , Ishak Aris, Modeling Brake Torque of CNGDI Engine Using Two-Stage

Regression Technique. Regional Conference on Automotive Research (ReCAR) 2011, 14-15th

December 2011. Kuala Lumpur, Malaysia

7. Mohd Khair Hassan , Ishak Aris, Roslina Sidek and Senan Mahmod Power and torque

comparison FOR CNG and Petrol Using LES software.World Engineering Congress 2010, 2nd –

5th August 2010, Kuching, Sarawak, Malaysia Conference on Engineering and Technology

Education.

8. M.K Hassan, I.Aris, S.Mahmod and R. Sidek, Exhaust gas concentration of CNG fuelled direct

injection engine at MBT timing, International Advanced of Technology Congress, 2009, PWTC,

Kuala Lumpur, 3-5 November 2009.

9. M.K Hassan, I.Aris, S.Mahmod, R. Sidek, K.N. Zainuddin, N.A.Alina, H.H Masjuki, M.

Redzuan, M.A.Kalam,The Influence of Fuel Injection Timing Towards Exhaust Emissions in

Compressed Natural Gas Direct Injection (CNGDI) Engine-An Experimental Study, 3rd Brunei

International Conference on Engineering and Technology, BICET2008, 3-4 Nov.2008

10. M.K Hassan, I.Aris, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan,

M.A. Kalam, The Effects of Ignition and Injection Timings On Compressed Natural Gas Direct

Injection (CNGDI) Multicylinder Engine, 1st Engineering Conference, Energy and Environment,

27-28 December 2007, Kuching Sarawak.

11. I.Aris, M.K Hassan, S.Mahmod, R.Sidek, K.N. Zainudin, N.A.Alina, H.H. Masjuki, M.Redzwan,

M.A. Kalam, Experimental Test and Simulation of Compressed Natural Gas Direct Injection

(CNGDI) Single cylinder Engine, 1st Engineering Conference, Energy and Environment, 27-28

December 2007, Kuching Sarawak.

12. Mohd Khair Hassan, Ishak Aris, Jasronita Jasni, Senan Mahmod, roslina Sidek, Hashim Hizam,

Comparative Study of The Potential of Campro 1.6L Engine Fuelled by Compressed Natural

Gas, World Engineering Congress 2007 (WEC 2007), 5-9 August, Penang, Malaysia.

13. Mohd Khair Hassan, Ishak Aris,K.N. Zainuddin, H.H Masjuki , M. Redzuan, M.A.Kalam

Performance Analysis Of 1.6l Campro Engine Using Motec And OEM Engine Control Unit,

Proc.of the 2nd International Engineering Convention 2007 (IntEC2007), 9-14 Mac 2007. Jeddah,

Arab Saudi.

14. I.Aris, M.K. Hassan, R.Sidek, S.Mahmod, I.Mat, K.N.Zainuddin, N.A.Othman, R.K.Z.Sahbudin.

Trend in Electronic Control Unit Development With Real-Time Embedded Target, Proc. Of the

Brunei International Conference of Engineering and Technology (BICET) 2005, Brunei

Darussalam, 15-18 August 2005.

15. Mohd Khair Hassan, Ishak Aris, Roslina Sidek, Senan Mahmod, Model-Based Approach with

Real Time Embedded Target for Rapid ECU Development: An Overview, Proceeding of the

Jordan International of Electrical and Electronic Engineering Conference (JIEEEC) 2005,15-17

Nov,2005. Amman, Jordan.

16 | updated 14/8/2017

16. Khairul Nizam, Mohd Khair Hassan, Ishak Aris, Ibrahim Mat, Nik Anis Alina, Issues and

Challenges of ECU Development, RENTAS Symposium 2004, 24-25 Nov 2004, Faculty. Of

Engineering. UPM.

17. Mohd Khair Hassan, Khairul Nizam Zainuddin, Development Of Control Strategy Of Ecu For

CNG–Di Engine , CNG-DI and Transmission Workshop, 21-23 Dec 2004, Hotel Equtorial,

Melaka.

18. Mohd.Khair Hassan, Ribhan Zafira Abdul Rahman, Norhayati Hamid, Mohd Liakot Ali,

Learning Aid for Electric Circuits Analysis with MATLAB based GUI, Proceeding of The

Seventh Triennial AEESEAP Conference, Univ.Malaya.8,9 Dec 2003, pp 233.

19. Ikmal Arif Abd. Jalal, Mohd Khair Hassan, Mohd Amrallah Mustafa, Smart Lighting

Management System, SCOReD 2003, Palm Garden Renaissance Hotel, Putrajaya. 25-26 August

2003.

20. Mohd Khair Hassan, Syed Malik Faizal, EMS Applications and Components. Direct Injection

Technology and EMS Development Workshop, 23/9- 24/9/ 2003, Hotel Residence, Putrajaya,

Malaysia

21. Mohd Khair Hassan, Samsul Bahari Mohd Noor, Brian Dyer, Mathematical Model Of Pontoon

System, Proc of World Engineering Congress 2002, 22-24 July 2002, Kuching Sarawak,

Malaysia.

g. Other Presentation (Poster/Product/Exhibition/Showcase)

Name of

authors

Title Poster/Product/Exhibition/Sho Poster/Product/Exhibition/Showcase

Year

1

Mohd Khair,

Mohd Hafiz

Nordin, Azura

che Soh, Mohd

Amran Mohd

Radzi

Hardware-in-Loop (HiL) of

Fault Detection for Air-Fuel

Ratio Control

Principal Investigator

Malaysia Invention & Design

Society (MINDS) at

International Engineering

Invention and Innovation

Exhibition (i-ENVEX). April11th

-13th 2014: Universiti Malaysia

Perlis

2014

2 Mohd Khair

Hassan,Aiman

Razak,

Hybrid Artificial

Intelligence of Battery

Balancing for Electric Vehicle.

The 5th Exposition on Islamic

Innovation 2014 2014

h. Other Equivalent Outcomes (Monograph/Module/Popular Writing & Article/Design etc)

Title Poster/Product/Exhibition/Showcase Year

1

Industrial Instrumentation and

Control Operation and Maintenance:

Level 3

National Occupational Skills Standard

(NOSS), Department of Skill Development,

Ministry of Human Resources, MALAYSIA.

2013

17 | updated 14/8/2017

Panel Contributor

2 Industrial Instrumentation and

Control System- Monitoring and

Controlling Level 4

Panel Contributor




2013

3 Industrial Instrumentation & Control

System- Planning and Technical

Management

Level 5

Panel Contributor




2013

J. RESEARCH ACTIVITIES

a. Research Grants:

i. Principal Investigator

No Project Title Amount (RM) Year Funder

1 Development of Automated Chicken Slaughtering and Cleaning Machine

37,750 1/2016 PPRN, MOSTI

2 Optimal Design of Energy Management System for

Battery Electric Vehicle using Hybrid Artificial

Intelligence

20,000 12/2015 Geran Putra

2 Regenerative Braking Strategy for Electric Vehicles using Adaptive Genetic Algorithm

20,000 12/2015 Geran Putra

3 Formulation of Hybrid Artificial Intelligence Control

of Energy System for Electric Vehicle (EV)

147,000

Completed 2013-15 FRGS,MOSTI

4 Exploration on Hybrid Artificial Intelligence of

Model-Based Calibration Engine

63,000

Completed

2011-13 ERGS,MOSTI

5 Parameter Optimizations of CNG Fuelled Direct-

Injection Engine Using GT-Suite Simulation Package

30,000

Completed

2009-11 RUGS,UPM

6 Real Time Inverted Pendulum Controllers for SISO

and MIMO Analysis

10,000

Completed

2003-04 New Lecturer

Scheme, UPM

ii. Co-Researcher

No Project Title Amount (RM) Year Funder

1 A Novel Practical Synchronization Control

Approach for a Twin axes Table Driven System in

Industrial Transportation

78000 2016-2018

MOSTI

FRGS

Collaboration

with UTeM

18 | updated 14/8/2017

2 Parametric Modelling and Development of Battery

Cell Balancing for Energy Optimization in Electric

Vehicle (EV)

201,500 2015-17 MOSTI

E-Science Fund

Collaboration

with IIUM

3 Lightning Surges on Distribution Line and Its

Effect on Transformer Design and Protection

146,700

On-going

2015-17 GP-IPB,UPM

4 Nature-Inspired Parametric Analysis of Driver’s

Spinal Response to Steering Vibration Impact for

Electric Vehicle Steering System

50,000

On-going

2014-16 RACE-MOE

Collaboration

with IIUM

5 Development of ECU for MEEGE Multi-fuel Mixer

for Green Engine

329,600

On-going

2013-15 GP-IPB,UPM

6 Parametric Modelling and Intelligent Control for

Vehicle Electrical Loads (VEL) using Fuzzy logic

control and Particle Swarm Optimisation (FLC-

PSO)-

50,000

Completed

2012-15 ERGS,MOSTI

Collaboration

with IIUM

7 Formulation of Algorithm to Classify Distinctive

Odors Pattern of Aromatic Plant Species using

Hybrid Artificial Intelligence Techniques

121,500

On-going

2013-15 FRGS,MOSTI

8 Development of A lifting Equation for Malaysia

population

15,000

On-going

2013-15 GP-IPS

9 The First Radio Quiet Zone(RQZ) Map for Radio

Astronomy in Malaysia

183,000

Completed

2013-14 ANGKASA &

MOSTI

Collaboration

with UM

10 An Intelligent Load Control System for Autonomous

Microgrid Based on Solar and Wind energy

14,300

Completed

2012-13 RUGS

11 Development of E-Nose Herbs Recognition System

Based on Artificial Intelligence Technique

63,000

Completed

2012-14 RUGS

12 Signal Processing Algorithm Development for

Ultrasonic Imaging in In-Vivo Skin

Characterization-

94,000

Completed

2012-14 RUGS

13 Development of Signal Emulator and Calibration

Tool for Multifuel Electronic Control Unit of a

Vehicle Power Train

30,000

Completed

2009-11 RUGS

14 ROBOCON 2005 150,000

Completed

2005 UPM

19 | updated 14/8/2017

b. Patent/Commercialization

i) Patent

ii) Copyright

K. CONSULTATION ACTIVITIES

a. Consultation Projects

No Year Title Authority

1 2015 Chicken Slaughter and Neck Cleaning For Halal

Industry

Project leader

Hajar Hijrah Sdn Bhd under PPRN

(RM37,500)

No. Title Status

(Granted/Pending)

1 Phyto-Herbal Electric Nose- Layout Design and of an

integrated circuit

Azura Che Soh, Umi Kalsom Mohamad

Yusof, Asnor Juraiza Ishak, Mohd

Khair Hassan 2 Method for Controlling Multiple-injection of Gaseous

Fuel in a Direct Injection Engine PI20054808.

Pending

Ishak Aris, Khairul Nizam, Nik Anis

Alina and Mohd Khair Hassan

No. Title Status

(Granted/Pending)

1 Lightning Severity Classification v.1.0- software

18/8/2014

Copyrighted Mohd Khair Hassan, Muhammad Azhar

Omar, Azura Che soh and Mohd Zainal

Abidin Ab Kadir. 2 Phyto-Herbal Electric Nose- software 25/8/2015 Copyrighted

Azura Che Soh, Umi Kalsom Mohamad

Yusof, Asnor Juraiza Ishak, Mohd

Khair Hassan

20 | updated 14/8/2017

2 2015 PROTON Engineering Short Course Program-

Facilitator for Advanced Modeling and

Simulation

Research and Development. PROTON

Sdn Bhd

3 2015 Pakar Penilai bagi Business Start-up Fund

(BSF)- Expert panel

Malaysian Technology Development

Corporation Sdn. Bhd

4 2015 Program KIK, Technical Advisor

Kem Terendak Melaka,

5 2013 Development of Curriculum (COCU) Level 4 for

Instrumentation and Control System- Expert

Consultant

Ministry of Human Resources, Malaysia

for the development of COCU Level 3

Instrument and control System

6 2010 ECU and harness development -Technical

Consultant

CAR (Centre for Automotive Research),

Faculty of Engineering and Built

Environment, The National University of

Malaysia

L. EXTENSION AND OTHER PUBLIC SERVIES

a. Thesis Examiner

Master- Internal Examiner (UPM)

No. Name Title Designated

1. Ahmed M.M Almassri Development of Grasping Algorithm for Measuring

unknown Objects Weight on robotic Hand

Application

Chairman/2015

2. Sanaz Yadegar Chatter-Free and Equivalent Estimator Fuzzy

Model Based Sliding Mode controller for Serial

Link 6 DOF Robot Manipulator

Chairman/2015

1. Wong Zhen Yang

Wearable Power Assisted Exoskeleton For

Rehabilitation

Chairman/2015

2. Norazlin Ibrahim An Analysis of Bilinear Distillation Column Using

Tubular Model

Examiner/2004

Master – External Examiner (others)

No. Name Title Designated

1. Jailani Jamaludin Cutting Force Compensation Using Distribution

Force Observer for XYZ Positioning Table

UTeM/2015

b. Public Services- Government/Private

No Title Authority/Funding Designation

1 Treasurer- Malaysian Society for Automatic Control Engineers

MACE-IFAC Treasurer

21 | updated 14/8/2017

2 Panel Penilai, POLITEKNIK Kurikulum

Baharu Tahap 1

Jabatan Pengajian Politeknik,

Kementerian Pendidikan Malaysia

Expert Panel

3 Malaysian Qualifications Agency

(MQA) panel

MQA Panel

4 Co-opted member Engineering Education Technical Division, Institute of Engineers Malaysia

IEM, Malaysia Committee

5 Working group on Electrical Measuring Equipment and Their Accessories, Standard ,SIRIM

SIRIM Commitee

6 Creativity & Innovative Technology

Competition- CITEC Exhibition 2014

Manpower Department, Ministry of

Human Resources, Malaysia

Judge

7 National Occupational Skills Standard

(NOSS), NOSS- Instrumentation Control

System- Level 3, 4 and 5 ,2013

National Occupational Skills

Standard (NOSS),

Department of Skill Development,

Ministry of Human Resources,

Malaysia

Expert Panel

8 Special Project: Hardware in Loop

Research Program- 2012

Proton Shah Alam, Research

Department

Expert panel

9 Stakeholders Engagement for Planning and

Setting Direction of Green Technology

Master Plan Preparation-2012

Ministry of Energy, Green

Technology and Water (KeTTHA)

and Malaysian Green Technology

Corporation (GreenTech Malaysia).

Facilitator

10 Bachelor of Technology (Hons) in Applied

Automotive program, Department of

Mechanical and Automotive Engineering

(2011-2013)

Kuala Lumpur International

University College (KLIUC)

Industrial

Stake Holder

11 Engineering Industrial Training (EIT)

Workshop- 2013

Kulliyah of Engineering,

International Islamic University

(IIUM)

Invited

Speaker

12 Starting School, for Semester 1 2013/2014,

Pusat Kokurikulum Pembangunan Pelajar

(PKPP) 2013

Universiti Putra Malaysia Facilitator

13 Knowledge Sharing- Hardware-in-Loop

engineering process

Local Expert Attachment Program Invited

Speaker

14 Knowledge Sharing- Hardware-

Implimentation of Model Based Design

Approach for Energy Efficiency in Electric

Vehicle

Local Expert Attachment Program Invited

Speaker

15 Bachelor of Electrical and Electronic

Engineering Department of Electrical and

Electronic Engineering, Universiti

Putra Malaysia; 2008–13

Program

Evaluator

16 Green Technology Challenge.2013 Schneider Electric Malaysia

University Challenge-

Proposal

evaluator

22 | updated 14/8/2017

17 Organizing Committee Asian International

Conference

Asian Control Conference 2015

(ASCC2015)

Technical

programme

18 Modelling and simulation using MATLAB Faculty of Engineering, 7-8 May

2003

Facilitator

19 Science Fund Proposal: UTM0005505.

Ministry of Higher Education, 2012

Evaluator

c. Editorial Committee & Journal Reviewer

No Title Authority/Funding Designation

1 American Journal of Modeling and

Optimization

(http://www.sciepub.com/journal/A

JMO). :ISSN (Print): 2333-1143

Editorial

Committee

2 Journal of Automation and Control

Engineering

(www.aicit.org/jace/home/editorial.

html). ISSN : 2287-6529

Editorial

Committee

3 Progress in Intelligent Computing and

Applications

www.humanpub.org/pica/home/edit

orial.html) ISSN: 2287-4844

Editorial

Committee

4 Mathematical Problems in Engineering

IF 1.082 Reviewer

5 IEEJ Journal of Industry Applications

(The Institute of Electrical Engineers of

Japan)

IF 0.213 Reviewer

6 Journal of Automation and Control

Engineering

SCOPUS Reviewer

7 American Journal of Vehicle Design

SCOPUS Reviewer

8 World Journal of Modelling and

Simulation

SCOPUS Reviewer

9 ARPN Journal of Engineering and Applied Science

SCOPUS Reviewer

10 Asian Journal of Fuzzy and Applied Mathematics (AJFAM)

- Reviewer

11 a. ReCAR 2015: 3rd Inter. Conf on

Recent Advances in Automotive

Engineering & Mobility Research)

b. CNTIA 2015 - International

Conference on Control Theory and Its

Application

c. ASCC 2015 The 10th Asian Control

Conference

d. CENCON 2015: IEEE Conference on

Energy Conversion

Malaysia

Malaysia

Malaysia

Malaysia

Reviewer

http://www.sciepub.com/journal/AJMO

http://www.sciepub.com/journal/AJMO

http://www.aicit.org/jace/home/editorial.html

http://www.aicit.org/jace/home/editorial.html

http://www.humanpub.org/pica/home/editorial.html

http://www.humanpub.org/pica/home/editorial.html

23 | updated 14/8/2017

12 a. 2014 IEEE Innovative Smart Grid Technologies Conference - Asia (ISGT ASIA) (ISGT14).

Malaysia

Reviewer

2014

13 a. ICCSCE 2013 : 2013 International

Conference on Control System,

Computing and Engineering, Penang

Malaysia

b. Asia Conference on Mechanical and

Materials Engineering (ACMME

2013).Wuhan, China, Oct 8-9,2013.

c. The 3rd IEEE International

Conference on Computer, Control &

Communication (IEEE-IC4 )-

Pakistan 25-26 Sept 2013

d. CMAME 2013 - International

Conference on Mechanical,

Automotive and Materials

Engineering (CMAME 2013)- Hong

Kong

e. IEEE Business Engineering and

Industrial Applications Colloquium

2013 (IEEE BEIAC 2013)-Malaysia

Malaysia

China

Pakistan

Hong Kong

Malaysia

Reviewer

2013

14 a. IEEE International Conference on

Power and Energy, 2-5 Dec 2012.

b. International Conference on

Agricultural, Food and Biological

Engineering, 2012

The 2nd International Symposium on

Mechanical Science and Technology

(ISMST 2011), 20-21 Dec Guangzhou,

China

Malaysia

Malaysia

China

Reviewer

2012

15 a. Colloquium on Humanities, Science

& Engineering Research (IEEE 2011)

Malaysia

Reviewer

2011

16 a. The Asia-Pacific Symposium on

Applied Electromagnetic and

Mechanics. (2010)

b. World Engineering Congress (WEC

2010)

Malaysia

Malaysia

Reviewer

2010

Reviewer

17 Editorial Committee for Society

Automotive Engineering (SAE)

conference International Conference on

Sustainable Mobility 2010.

Malaysia

Chairperson

24 | updated 14/8/2017

18 a. Asia Pacific Conference on Defence

& Security Technology (DSTC 2009).

Malaysia

Reviewer

2009

M. INVOLVEMENT IN PROFESSIONAL ASSOCIATION/ORGANISATION/BODY

Membership/ Affiliation

1. Treasurer (Malaysia), International Federation of Control and Automation. 2015

2. Member, Society of Automotive Engineering: 611339404

3. Member, Malaysia Society of Engineering & Technology (mSET) :00751

4. Member , Institute of Electrical and Electronics Engineers (IEEE): 80260879

5. Member, International Association of Engineer (IAENG): 115244

6. Senior Member, Science and Engineering Institute (SCIEI) :0060

7. Associate ember, Board of Engineers Malaysia (BEM): 35786A

8. Member, The Institute of Engineers, Malaysia (IEM) :48508

9. Persatuan Pegawai Akademik UPM, 2004

J. Committee in Professional Activities

No. Name of Program Role (Facilitator/Speaker/Others)

1 International Conference on Sustainable Mobility

2010

Editorial Committee/Session

Chairperson

2 Asian Control Conference 2015 Technical Programme Committee

3 The 2nd Mini Symposium on Artificial Intelligence and

Robotic (AIR 2014)

Technical Reviewer Committee

4 IEEE Student Conference on Research and Development (SCOReD), 2009

Technical Committee/ Session

Chairperson

K. Involvement in student development

No. Name of Program Organiser Role

(Facilitator/Speaker/Oth

ers)

Date

1 Starting School, UPM

2015, 2014

Pusat Korikulum dan

Pembangunan Pelajar,

UPM

Facilitator 28/9/2014,

2 Innovate Malaysia Design

Competition, 2014

MOHE Head of Project 2015

3 Curriculum Review KEE Head of Unit Control 2008

4 SCOReD 2009 IEEE Student Branch,

UPM

Chairman Session

committee

16/11/2009

5 FYP Exhibition KEE Coordinator 6/2014

6 MUROC 2012 Malaysia University

Robot Competition

Team Manager 2012

7 INNOVATE

Malaysia,2014

Innovate Malaysia Team leader 2014

25 | updated 14/8/2017

N. OTHER ACTIVITIES (sports)

No. Activities Organiser

1 Representing UPM in Football SUKUM 2015, Kejohanan Sukan Staf antara

Universiti

2 Representing Faculty of Engineering

in Football and Volleyball

Kejohanan Sukan Staf antara PTJ, 2015


in Football and Volleyball

Kejohanan Sukan Staf antara PTJ, 2002-2014


in Football, Badminton and Tarik Tali

(Champion)

Kejohanan Sukan Staf antara PTJ, 2002

UNIVERSITI PUTRA MALAYSIA · Universiti Tun Hussein Onn Malaysia Student Supervision – Master . 7 | updated 14/8/2017 Main Supervisor 1. Aiman Razak GS39806 Fuzzy Logic Design for

Documents