-
ROSENSTEEL LAW
ATTORNEYS AND COUNSELORS AT LAW
40 WALL STREET 33RD FLOOR
NEW YORK, NEW YORK 10005-1302
TELEPHONE: (212) 808-8300
September 24, 2013 VIA E-MAIL Voxility S.R.L. Dimitrie Pompeiu
9-9A, Building 24 020335 Bucharest Romania e-mail:
[email protected]
Re: URC CCP Software Notice of Software Piracy at
http://urcsoftware.com and www.urcsoftware.com
Dear Sir:
Please be advised that Rosensteel Law (the Firm) represents
Universal Remote Control, Inc., a New York corporation (URC) and
has been authorized to issue this letter by URC.
The Firm is writing this letter to notify you of apparently
illegal activity engaged in via http://urcsoftware.com and
www.urcsoftware.com, which domain name has been being hosted by
Voxility S.R.L. (Please see Exhibit 1).
Since its registration on August 17, 2013, this domain name has
apparently been used to commit software piracy against URC Complete
Control Program (URC CCP Software).
As a background, please note the following:
1. URC is a manufacturer of remote control devices.
2. URC sells the URC products only through its authorized
dealers and distributors in the U.S. and other countries.
3. None of URCs PC Programmable remotes or its Total Control
whole-
house products, including any software, are authorized for
online internet distribution in whole or in part.
E-MAIL [email protected] ADMITTED NJ & NY
ROSENSTEEL LAW WWW.ROSENSTEELLAW.COM
-
ROSENSTEEL LAW
September 24, 2013
2
4. URC CCP Software is the URCs software suite for programming
certain URC remote control devices.
5. Only URCs authorized dealers and distributors are permitted
to download
and distribute URCs software required to program URC remote
control devices, including but not limited to the URC CCP
Software.
6. Such downloading of the URC CCP Software requires URCs
authorized
dealers to pay for the license fee. However,
http://urcsoftware.com and www.urcsoftware.com are offering free
reproduction and distribution of the URC CCP Software, without
authorization from URC, via direct linkage to which is referred to
as the professional piracy website known as www.thepiratebay.sx.
(Please see Exhibit 2).
As you are aware, www.thepiratebay.sx apparently supports an
illegal piracy site (Please see Exhibit 3).
In addition, the URC remote control devices are being offered
for sale via http://urcsoftware.com. It is likely that such are
illegally obtained, including but not limited to, being obtained in
the black market (Please see Exhibit 4);
As you are further aware, the referenced activities associated
with the domain name of http://urcsoftware.com and
www.urcsoftware.com are likely illegal and constitute copyright
infringement as well as trademark infringement to the trademark of
URC (U.S. Reg. No. 3629207). For the above reasons, URC hereby
requests you to immediately:
1. Disclose the identity and contact information of the
registrant and/or operator for the domain name of urcsoftware.com;
and
2. Cease hosting the domain name of urcsoftware.com;
URC assumes that Voxility S.R.L neither had knowledge of such
illegal activity nor participated in such. Please find the enclosed
a copy of the URC letter to the registrant for your reference as
Exhibit 5 and a copy of the URC letter to PrivacyProtect.org for
your reference as Exhibit 6.
Please note that URC takes this matter very seriously.
-
ROSENSTEEL LAW
September 24, 2013
3
We will appreciate your prompt response advising your course of
action regarding the
above on or before October 8, 2013.
Thank you for your cooperation in advance.
This correspondence is submitted to you without prejudice to
other or different demands, rights or remedies of URC, all of which
URC expressly reserves and does not waive. Very truly yours, By:
________________________ Edward M. Rosensteel Attorney at Law cc:
PrivacyProtect.org
Report Abuse www.privacyprotect.org Universal Remote Control,
Inc.
09/24/2013 08:50:34 am
SigPlus1
-
EXHIBIT 1
Exh
ibit
1
EXHIBIT 1
-
Home Hosting Reviews Compare Hosting Coupons DMCA Blog About
Us
urcsoftware.com
Join Newsletter Share Page
Name Email
Get Six Months Free Hosting
Don't get our newsletter yet? You're missing out. We'd love you
to join, so we're offering six months free web hosting via a a big
brand host the second you sign up.
(We hate spam, too - you can unsubscribe at any time, as per our
privacy policy)
Share This Page
Share this page on your own blog or website. Just copy &
paste this HTML.
Who is hosting urcsoftware.com?
Like 945
urcsoftware.com Is Hosted by Voxility S.R.L Hosting: Voxility
S.R.L host the domain
urcsoftware.com
WHOIS: Click Here IP Address: 37.221.170.22 Name Servers:
ns27.alibabahost.com,
ns28.alibabahost.com
Visit Voxility S.R.L now
Last updated 19 September 2013. Bad result? Please refresh
data.
Want to know how we're funded? c. 10% of outbound clicks use
affiliate links, so we get a referral fee if you buy hosting.
Page 1 of 2urcsoftware.com | Who Is Hosting urcsoftware.com?
9/19/2013http://www.whoishostingthis.com/urcsoftware.com
-
2007-2013 WhoIsHostingThis.com. Powered by...
WhoIsHostingThis.com is operated by Quality Nonsense Ltd, a company
registered in England and Wales. Company No. 05889123. VAT No.
879480072. Registered office: 27 Mortimer Street, London, W1T 3BL,
UK.
Reviews | Coupons | Host Comparison
Want to know how we're funded? c. 10% of outbound clicks use
affiliate links, so we get a referral fee if you buy hosting.
Page 2 of 2urcsoftware.com | Who Is Hosting urcsoftware.com?
9/19/2013http://www.whoishostingthis.com/urcsoftware.com
-
EXHIBIT 2
Exh
ibit
2
EXHIBIT 2
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Details for this torrent
Search Torrents | Browse Torrents | Recent Torrents | TVshows |
Music | Top 100
Audio Video Applications Games Other All
Search here...
Type:Files:Size:
Tag(s):
Uploaded:By:
Seeders:Leechers:Comments
Info Hash:
Applications > Windows1692.37 MiB (726004673 Bytes)
Universal Remote Control URC CCPComplete Control Program MX-890
MX-780 MX-980 MX-1200 MX-5000
2013-08-22 17:43:59 GMTAnonymous
733
3914A43C52B03D572352F7138DF0461B90A26D9D
URC Complete Control Program (CCP)
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD(Problems
with magnets links are fixed by upgrading your torrent client!)
URC's Complete Control Program is a software suite for
programming the entire range of URC Professional Remotes that fall
under the Complete Control line of products.Complete Control
Program has the ability to control the following remote models:-
MX-780- MX-880- MX-880z- MX-890- MX-900- MX-980- MX-1200- MX-5000-
MX-6000- KP-900- KP-4000- MRX-1- MRF-260- MRZ-260- MRF-350-
MSC-400Compatible with Windows XP, Vista, Windows 7 & Windows
8Version: CCPSetup 03-26-2013Filename: CCPSetup_2013_03_26.rar
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD
Comments
MastahRiz at 2013-08-23 03:47 CET:
Verified - working. Thanks uploader.
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Login | Register | Language / Select language | About | Legal
threats | Blog Contact us | Usage policy | Downloads | Promo |
Doodles | Tag Cloud | Forum | PirateBrowser
Bayfiles | BayImg | PasteBay | Proxy | Follow TPB on Twitter |
Follow TPB on Facebook
6.362.992 registered users. Last updated 20:20:05.41.815.099
peers (32.136.530 seeders + 9.678.569 leechers) in 5.390.516
torrents.
BitCoin: 1KeBs4HBQzkdHC2ou3gpyGHqcL7aKzwTveLiteCoin:
LiYp3Dg11N5BgV8qKW42ubSZXFmjDByjoV
Orange82 at 2013-08-23 04:33 CET:
Mr.zenar98 at 2013-08-23 11:21 CET:
Confirm this works on Win 7. Thanks for uploading.
fantastik !!!!!
-
EXHIBIT 3
Exh
ibit
3
EXHIBIT 3
-
Whois Domain Lookup Search - Whois Lookup: Find Who Registered a
Website, Check Domain Name
http://www.register.com/whois.rcmx[8/28/2013 4:01:01 PM]
Protect assets from personal liability
Advertisement
About Us | Become an Affiliate | Advertising with Register |
Become a Reseller | Partner Offers
1995-2013 by Register.com . Please read our Disclaimer, Privacy
Notice, Services Agreement, Dispute Policy, and DMCA Notice.
Call us toll free at 1.888.734.4783; Outside the US please call
1.902.749.2762
Whats New in IBM Cognos 10.2 View the Free Demo Now.IBM Business
Intelligence www.IBM.com/New_Cogn
Customer Support Log In Cart (0)Speak to a web expert. Call us
toll free at 1.888.734.4783
Network Monitoring Tool
Monitor WAN, LAN, Servers, Apps, URLs, Event Logs & More.
Free TrialOpManager.ManageEngine.com
Whois LookupCheck to see who has registered any Web address. If
theWeb address is available, you can register it
throughRegister.com.
EXAMPLE: mybrand.com
The domain extension .sx is invalid.
Need help with international characters or special symbols?
-
EXHIBIT 4
Exh
ibit
4
EXHIBIT 4
-
Hot Deals
If youre looking to purchase a URC remote but dont want to pay
the ripoff pricing that your local dealer quoted
you, there are some amazing deals that can be found on eBay for
brand new remotes.
Be sure to read our Buyers Guidefirst and then check back here
for any great deals that weve listed. We will try our best to
update this page regularly. And remember, once youve purchased your
remote, be sure to grab a
free copy of the Complete Control Program software!
Featured Deals
What:URC MX-890 Remote ControlWhere: eBay Click Here
Price: $299.99 (includes tax and shipping)
Dont pay the $500 MSRP plus tax for this device that your dealer
quoted you!
Buying online allows you to have the power and functionality of
one of URCs most advanced remotes at a fraction of the cost.
What:URC MX-780 Remote ControlWhere: eBay Click Here
Price: $125.00 (includes tax and shipping)
Dont pay the $300 MSRP plus tax for this device that your dealer
quoted you!
Buying online allows you to have the power and functionality of
one of URCs most advanced remotes at a fraction of the cost.
Also, here is a link to some more remotes currently for sale:URC
Remotes on eBay.
Page 1 of 1Hot Deals | URC Software & Guides
9/19/2013http://urcsoftware.com/hot-deals/
-
EXHIBIT 5
Exh
ibit
5
EXHIBIT 5
-
ROSENSTEEL LAW
ATTORNEYS AND COUNSELORS AT LAW
40 WALL STREET 33RD FLOOR
NEW YORK, NEW YORK 10005-1302
TELEPHONE: (212) 808-8300
September 17, 2013 VIA E-MAIL Domain Name Registrant -
urcsoftware.com c/o: PrivacyProtect.org Contact Domain Owner
www.privacyprotect.org
Re: URC CCP Software Software Piracy at http://urcsoftware.com
and www.urcsoftware.com
Dear Sir:
Please be advised that Rosensteel Law (the Firm) represents
Universal Remote Control, Inc., a New York corporation (URC) and
has been authorized to issue this letter by URC.
The Firm is writing this letter as an initial step to combat the
software piracy against URC Complete Control Program (URC CCP
Software) engaged in via http://urcsoftware.com and
www.urcsoftware.com.
As a background, please note the following:
1. URC is a manufacturer of remote control devices.
2. URC sells the URC products only through its authorized
dealers and distributors in the U.S. and other countries.
3. None of URC PC Programmable remotes or its Total Control
whole-
house products are authorized for online internet distribution,
in whole or in part, including any software.
4. URC CCP Software is the URCs software suite for programming
certain
URC remote control devices.
E-MAIL [email protected] ADMITTED NJ & NY
ROSENSTEEL LAW WWW.ROSENSTEELLAW.COM
-
ROSENSTEEL LAW
September 17, 2013
2
5. Only URCs authorized dealers and distributors are permitted
to download and distribute URCs software required to program URC
remote control devices, including but not limited to the URC CCP
Software.
6. Such downloading of the URC CCP Software requires URCs
authorized dealers to pay for the license fee.
It has come to URCs attention that recently, you registered the
domain name of urcsoftware.com via PrivacyProtect.org (Please see
Exhibit 1), and started to offer free reproduction and distribution
of the URC CCP Software on http://urcsoftware.com and
www.urcsoftware.com, without any authorization from URC, via direct
linkage to the professional piracy website known as
www.thepiratebay.sx. (Please see Exhibit 2).
As you are aware, www.thepiratebay.sx is an illegal piracy site
(Please see Exhibit 3). You are hereby notified that your conduct
is illegal. It violates applicable U.S. and international law, and
constitutes copyright infringement of the URC CCP Software and its
related documentation, as well as trademark infringement to the
trademark URC (U.S. Reg. No. 3629207). You are further hereby
notified that both you and the downloader of the URC CCP Software
via http://urcsoftware.com and www.urcsoftware.com are liable for
damages (including statutory penalties) to URC. For the above
reasons, you are hereby requested to immediately:
1. Surrender the domain name of urcsoftware.com, and all of its
similar variations containing urc registered and maintained in any
country;
2. Discontinue the unauthorized offering of the URC CCP
Software, in any form,
including but not limited to removing such from
http://urcsoftware.com and www.urcsoftware.com and any other
internet sites operated or controlled by you, including but not
limited to www.thepiratebay.sx;
3. Surrender all illegal copies of the URC CCP Software in your
possession to URC;
and
4. Provide an explanation in detail as to how and from whom you
obtained the URC CCP Software.
We expect your full compliance and cooperation with the above no
later than September
30, 2013.
-
ROSENSTEEL LAW
September 17, 2013
3
URC is determined to vigorously protect URCs rights, and will
pursue all available legal
means to prevent illegal piracy of the URC software and other
illegal conduct adverse to URC.
This correspondence is submitted to you without prejudice to
other or different demands, rights or remedies of URC, all of which
URC expressly reserves and does not waive.
Please note that URC takes this matter very seriously. Please be
guided accordingly. Very truly yours, By: ________________________
Edward M. Rosensteel Attorney at Law cc: PrivacyProtect.org
Report Abuse www.privacyprotect.org Universal Remote Control,
Inc.
09/17/2013 02:52:15 pm
SigPlus1
-
EXHIBIT 1
Exh
ibit
1
EXHIBIT 1
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
URC CCP Software Download
In order to get started programming your URC remote control, you
will firstneed to download and install the URC Complete Control
Program softwaresuite. To download the software, click on the link
below.
Note: A torrent program is required in order to download this
file. Todownload a free torrent client look in the Help section
below.
Download
URC Complete Control Program - URCs software suite for
programmingyour remote control.
Help
uTorrent - A free client for downloading torrent files.Beginners
Guide to Downloading Torrents
8 thoughts on URC CCP Software Download
Total Visitors
HOME
SharkRaidAugust 25, 2013 at 2:06 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
So my case is a little different. Unlike most everyone else whos
commentedhere I wasnt looking for the software for a pre-existing
remote that I owned.I just bought a MX-890 on eBay for around $350
and thanks to you guys willbe able to program it as soon as it
arrives. Now just need to pick up a cheapMRF-350 soon and I will be
all set. Going through a dealer I would havebeen paying $500 + $250
+ (~200 in programming) = almost $1000. Findinga MRF-350 for around
$100 shouldnt be too hard on eBay so my total all-inshouldnt be
more than around $450. Saved over $500 THANKS!!
Reply
After installing the CCP program Im having an issue with
retrieving theprogramming from my remote. Does it automatically
load up or is theresomething that I need to do? I connected the USB
cable and started CCPbut it is asking for me to start a new
file.
Any help would be appreciated, thanks!
Reply
After opening CCP choose the Empty option (No Rooms, NoRemotes)
then hit X to close the window that pops up asking you tosetup the
home layout. Then click on the Communications tab inthe toolbar
near the top and then click on the button Get fromRemote. Have your
remote connected to your computer beforedoing this and you should
be able to get your remotes programmingon your system.
Good luck!
Reply
TomAugust 21, 2013 at 10:20 am
Eczeema18August 22, 2013 at 8:51 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
WOAH! THANKS SO MUCH WORKS PERFECT
Reply
Can confirm this works. Just downloaded it with uTorrent and
followed theinstructions in the guide to download the software.
Installed it on myWindows 7 laptop and was able to pull the
software from the remote onto mycomputer.
Scanned the file with my virus scanner first and it came up
clean. Thank youvery much.
Reply
Ive owned my URC remote for 5 years now. The system was
installed andhad quirky problems involving some of the button
macros. Technicians hadto come back several times to modify the
remote programming. After a fewyears and over $1000 in service
visits, the on/off doesnt reliably turn off oron ALL devices.
Again, it is quirkyi.e., it sometimes does and sometimesdoes
not.
Finally, I decided to take this into my own hands and so tried
to find theprogramming manual and software for my device. After
calling the UniversalRemote Control factory I learned that the
software and programmingmanuals are available only to dealers.
Tim CarmikleAugust 21, 2013 at 7:21 am
HWalkenAugust 20, 2013 at 6:32 pm
J. BaldwinAugust 20, 2013 at 12:31 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Thank you so much for providing the software here. I am sick and
tired ofpaying professionals who cant solve simple problems with
this thing.
If you dont want to have to be held captive to professionals for
your AVsystem, DO NOT make my mistake. Buy the device and program
it yourself.
Reply
WOAH. Thanks. You just saved me another $150. Lets see, last
year I spentover $500 on updates. No anymore!
Reply
Thank you very much for sharing this. I love my URC remote but
am sickand tired of having to pay someone anytime I need to make a
minor changeto my programming.
Reply
Leave a Reply
Your email address will not be published. Required fields are
marked *
Name *
Email *
JosephAugust 19, 2013 at 5:57 pm
AaronAugust 19, 2013 at 3:17 pm
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Website
Comment
You may use these HTML tags and attributes:
Proudly powered by WordPress
-
EXHIBIT 2
Exh
ibit
2
EXHIBIT 2
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Details for this torrent
Search Torrents | Browse Torrents | Recent Torrents | TVshows |
Music | Top 100
Audio Video Applications Games Other All
Search here...
Type:Files:Size:
Tag(s):
Uploaded:By:
Seeders:Leechers:Comments
Info Hash:
Applications > Windows1692.37 MiB (726004673 Bytes)
Universal Remote Control URC CCPComplete Control Program MX-890
MX-780 MX-980 MX-1200 MX-5000
2013-08-22 17:43:59 GMTAnonymous
733
3914A43C52B03D572352F7138DF0461B90A26D9D
URC Complete Control Program (CCP)
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD(Problems
with magnets links are fixed by upgrading your torrent client!)
URC's Complete Control Program is a software suite for
programming the entire range of URC Professional Remotes that fall
under the Complete Control line of products.Complete Control
Program has the ability to control the following remote models:-
MX-780- MX-880- MX-880z- MX-890- MX-900- MX-980- MX-1200- MX-5000-
MX-6000- KP-900- KP-4000- MRX-1- MRF-260- MRZ-260- MRF-350-
MSC-400Compatible with Windows XP, Vista, Windows 7 & Windows
8Version: CCPSetup 03-26-2013Filename: CCPSetup_2013_03_26.rar
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD
Comments
MastahRiz at 2013-08-23 03:47 CET:
Verified - working. Thanks uploader.
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Login | Register | Language / Select language | About | Legal
threats | Blog Contact us | Usage policy | Downloads | Promo |
Doodles | Tag Cloud | Forum | PirateBrowser
Bayfiles | BayImg | PasteBay | Proxy | Follow TPB on Twitter |
Follow TPB on Facebook
6.362.992 registered users. Last updated 20:20:05.41.815.099
peers (32.136.530 seeders + 9.678.569 leechers) in 5.390.516
torrents.
BitCoin: 1KeBs4HBQzkdHC2ou3gpyGHqcL7aKzwTveLiteCoin:
LiYp3Dg11N5BgV8qKW42ubSZXFmjDByjoV
Orange82 at 2013-08-23 04:33 CET:
Mr.zenar98 at 2013-08-23 11:21 CET:
Confirm this works on Win 7. Thanks for uploading.
fantastik !!!!!
-
EXHIBIT 3
Exh
ibit
3
EXHIBIT 3
-
Whois Domain Lookup Search - Whois Lookup: Find Who Registered a
Website, Check Domain Name
http://www.register.com/whois.rcmx[8/28/2013 4:01:01 PM]
Protect assets from personal liability
Advertisement
About Us | Become an Affiliate | Advertising with Register |
Become a Reseller | Partner Offers
1995-2013 by Register.com . Please read our Disclaimer, Privacy
Notice, Services Agreement, Dispute Policy, and DMCA Notice.
Call us toll free at 1.888.734.4783; Outside the US please call
1.902.749.2762
Whats New in IBM Cognos 10.2 View the Free Demo Now.IBM Business
Intelligence www.IBM.com/New_Cogn
Customer Support Log In Cart (0)Speak to a web expert. Call us
toll free at 1.888.734.4783
Network Monitoring Tool
Monitor WAN, LAN, Servers, Apps, URLs, Event Logs & More.
Free Trial
OpManager.ManageEngine.com
Whois LookupCheck to see who has registered any Web address. If
theWeb address is available, you can register it
throughRegister.com.
EXAMPLE: mybrand.com
The domain extension .sx is invalid.
Need help with international characters or special symbols?
-
EXHIBIT 6
Exh
ibit
6
EXHIBIT 6
-
ROSENSTEEL LAW
ATTORNEYS AND COUNSELORS AT LAW
40 WALL STREET 33RD FLOOR
NEW YORK, NEW YORK 10005-1302
TELEPHONE: (212) 808-8300
September 17, 2013 VIA E-MAIL PrivacyProtect.org Report Abuse
www.privacyprotect.org
Re: URC CCP Software Notice of Software Piracy at
http://urcsoftware.com and www.software.com Dear Sir:
Please be advised that Rosensteel Law (the Firm) represents
Universal Remote Control, Inc., a New York corporation (URC) and
has been authorized to issue this letter by URC.
The Firm is writing this letter to notify you of illagal
activity engaged in via http://urcsoftware.com and
www.urcsoftware.com, which domain name has been registered by
PrivacyProtect.org under proxy (Please see Exhibit 1).
Since its registration on August 17, 2013, this domain name has
been used to commit
software piracy against URC Complete Control Program (URC CCP
Software).
As a background, please note the following:
1. URC is a manufacturer of remote control devices.
2. URC sells the URC products only through its authorized
dealers and distributors in the U.S. and other countries.
3. None of URC PC Programmable remotes or its Total Control
whole-
house products are authorized for online internet distribution
in whole or in part including any software.
E-MAIL [email protected] ADMITTED NJ & NY
ROSENSTEEL LAW WWW.ROSENSTEELLAW.COM
-
ROSENSTEEL LAW
September 17, 2013
2
4. URC CCP Software is the URCs software suite for programming
certain
URC remote control devices.
5. Only URCs authorized dealers and distributors are permitted
to download and distribute URCs software required to program URC
remote control devices, including but not limited to the URC CCP
Software.
6. Such downloading of the URC CCP Software requires URCs
authorized
dealers to pay for the license fee. However,
http://urcsoftware.com and www.urcsoftware.com are offering free
reproduction and distribution of the URC CCP Software, without
authorization from URC, via direct linkage to the professional
piracy website known as www.thepiratebay.sx. (Please see Exhibit
2).
As you are aware, www.thepiratebay.sx is an illegal piracy site
(Please see Exhibit 3). As you are further aware, such activity is
obviously illegal and constitutes copyright infringement as well as
trademark infringement. For the above reasons, URC hereby requests
you to:
1. Disclose the identity and contact information of the
registrant of urcsoftware.com;
2. Cease serving as a registration agent for the domain name of
urcsoftware.com; and
3. Cease serving as a administrative contact.
URC assumes that PrivacyProtection.org neither had knowledge of
such illegal activity nor participated in such. Please find the
enclosed a copy of the URC letter to the registrant for your
reference as Exhibit 4.
Please note that URC takes this matter very seriously. We will
appreciate your prompt response advising your course of action
regarding the
above on or before September 30, 2013.
Thank you for your cooperation in advance.
-
ROSENSTEEL LAW
September 17, 2013
3
This correspondence is submitted to you without prejudice to
other or different demands,
rights or remedies of URC, all of which URC expressly reserves
and does not waive. Very truly yours, By: ________________________
Edward M. Rosensteel Attorney at Law cc: Universal Remote Control,
Inc.
09/17/2013 02:48:34 pm
SigPlus1
-
EXHIBIT 1
Exh
ibit
1
EXHIBIT 1
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
URC CCP Software Download
In order to get started programming your URC remote control, you
will firstneed to download and install the URC Complete Control
Program softwaresuite. To download the software, click on the link
below.
Note: A torrent program is required in order to download this
file. Todownload a free torrent client look in the Help section
below.
Download
URC Complete Control Program - URCs software suite for
programmingyour remote control.
Help
uTorrent - A free client for downloading torrent files.Beginners
Guide to Downloading Torrents
8 thoughts on URC CCP Software Download
Total Visitors
HOME
SharkRaidAugust 25, 2013 at 2:06 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
So my case is a little different. Unlike most everyone else whos
commentedhere I wasnt looking for the software for a pre-existing
remote that I owned.I just bought a MX-890 on eBay for around $350
and thanks to you guys willbe able to program it as soon as it
arrives. Now just need to pick up a cheapMRF-350 soon and I will be
all set. Going through a dealer I would havebeen paying $500 + $250
+ (~200 in programming) = almost $1000. Findinga MRF-350 for around
$100 shouldnt be too hard on eBay so my total all-inshouldnt be
more than around $450. Saved over $500 THANKS!!
Reply
After installing the CCP program Im having an issue with
retrieving theprogramming from my remote. Does it automatically
load up or is theresomething that I need to do? I connected the USB
cable and started CCPbut it is asking for me to start a new
file.
Any help would be appreciated, thanks!
Reply
After opening CCP choose the Empty option (No Rooms, NoRemotes)
then hit X to close the window that pops up asking you tosetup the
home layout. Then click on the Communications tab inthe toolbar
near the top and then click on the button Get fromRemote. Have your
remote connected to your computer beforedoing this and you should
be able to get your remotes programmingon your system.
Good luck!
Reply
TomAugust 21, 2013 at 10:20 am
Eczeema18August 22, 2013 at 8:51 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
WOAH! THANKS SO MUCH WORKS PERFECT
Reply
Can confirm this works. Just downloaded it with uTorrent and
followed theinstructions in the guide to download the software.
Installed it on myWindows 7 laptop and was able to pull the
software from the remote onto mycomputer.
Scanned the file with my virus scanner first and it came up
clean. Thank youvery much.
Reply
Ive owned my URC remote for 5 years now. The system was
installed andhad quirky problems involving some of the button
macros. Technicians hadto come back several times to modify the
remote programming. After a fewyears and over $1000 in service
visits, the on/off doesnt reliably turn off oron ALL devices.
Again, it is quirkyi.e., it sometimes does and sometimesdoes
not.
Finally, I decided to take this into my own hands and so tried
to find theprogramming manual and software for my device. After
calling the UniversalRemote Control factory I learned that the
software and programmingmanuals are available only to dealers.
Tim CarmikleAugust 21, 2013 at 7:21 am
HWalkenAugust 20, 2013 at 6:32 pm
J. BaldwinAugust 20, 2013 at 12:31 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Thank you so much for providing the software here. I am sick and
tired ofpaying professionals who cant solve simple problems with
this thing.
If you dont want to have to be held captive to professionals for
your AVsystem, DO NOT make my mistake. Buy the device and program
it yourself.
Reply
WOAH. Thanks. You just saved me another $150. Lets see, last
year I spentover $500 on updates. No anymore!
Reply
Thank you very much for sharing this. I love my URC remote but
am sickand tired of having to pay someone anytime I need to make a
minor changeto my programming.
Reply
Leave a Reply
Your email address will not be published. Required fields are
marked *
Name *
Email *
JosephAugust 19, 2013 at 5:57 pm
AaronAugust 19, 2013 at 3:17 pm
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Website
Comment
You may use these HTML tags and attributes:
Proudly powered by WordPress
-
EXHIBIT 2
Exh
ibit
2
EXHIBIT 2
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Details for this torrent
Search Torrents | Browse Torrents | Recent Torrents | TVshows |
Music | Top 100
Audio Video Applications Games Other All
Search here...
Type:Files:Size:
Tag(s):
Uploaded:By:
Seeders:Leechers:Comments
Info Hash:
Applications > Windows1692.37 MiB (726004673 Bytes)
Universal Remote Control URC CCPComplete Control Program MX-890
MX-780 MX-980 MX-1200 MX-5000
2013-08-22 17:43:59 GMTAnonymous
733
3914A43C52B03D572352F7138DF0461B90A26D9D
URC Complete Control Program (CCP)
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD(Problems
with magnets links are fixed by upgrading your torrent client!)
URC's Complete Control Program is a software suite for
programming the entire range of URC Professional Remotes that fall
under the Complete Control line of products.Complete Control
Program has the ability to control the following remote models:-
MX-780- MX-880- MX-880z- MX-890- MX-900- MX-980- MX-1200- MX-5000-
MX-6000- KP-900- KP-4000- MRX-1- MRF-260- MRZ-260- MRF-350-
MSC-400Compatible with Windows XP, Vista, Windows 7 & Windows
8Version: CCPSetup 03-26-2013Filename: CCPSetup_2013_03_26.rar
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD
Comments
MastahRiz at 2013-08-23 03:47 CET:
Verified - working. Thanks uploader.
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Login | Register | Language / Select language | About | Legal
threats | Blog Contact us | Usage policy | Downloads | Promo |
Doodles | Tag Cloud | Forum | PirateBrowser
Bayfiles | BayImg | PasteBay | Proxy | Follow TPB on Twitter |
Follow TPB on Facebook
6.362.992 registered users. Last updated 20:20:05.41.815.099
peers (32.136.530 seeders + 9.678.569 leechers) in 5.390.516
torrents.
BitCoin: 1KeBs4HBQzkdHC2ou3gpyGHqcL7aKzwTveLiteCoin:
LiYp3Dg11N5BgV8qKW42ubSZXFmjDByjoV
Orange82 at 2013-08-23 04:33 CET:
Mr.zenar98 at 2013-08-23 11:21 CET:
Confirm this works on Win 7. Thanks for uploading.
fantastik !!!!!
-
EXHIBIT 3
Exh
ibit
3
EXHIBIT 3
-
Whois Domain Lookup Search - Whois Lookup: Find Who Registered a
Website, Check Domain Name
http://www.register.com/whois.rcmx[8/28/2013 4:01:01 PM]
Protect assets from personal liability
Advertisement
About Us | Become an Affiliate | Advertising with Register |
Become a Reseller | Partner Offers
1995-2013 by Register.com . Please read our Disclaimer, Privacy
Notice, Services Agreement, Dispute Policy, and DMCA Notice.
Call us toll free at 1.888.734.4783; Outside the US please call
1.902.749.2762
Whats New in IBM Cognos 10.2 View the Free Demo Now.IBM Business
Intelligence www.IBM.com/New_Cogn
Customer Support Log In Cart (0)Speak to a web expert. Call us
toll free at 1.888.734.4783
Network Monitoring Tool
Monitor WAN, LAN, Servers, Apps, URLs, Event Logs & More.
Free Trial
OpManager.ManageEngine.com
Whois LookupCheck to see who has registered any Web address. If
theWeb address is available, you can register it
throughRegister.com.
EXAMPLE: mybrand.com
The domain extension .sx is invalid.
Need help with international characters or special symbols?
-
EXHIBIT 4
Exh
ibit
4
EXHIBIT 4
-
ROSENSTEEL LAW
ATTORNEYS AND COUNSELORS AT LAW
40 WALL STREET 33RD FLOOR
NEW YORK, NEW YORK 10005-1302
TELEPHONE: (212) 808-8300
September 17, 2013 VIA E-MAIL Domain Name Registrant -
urcsoftware.com c/o: PrivacyProtect.org Contact Domain Owner
www.privacyprotect.org
Re: URC CCP Software Software Piracy at http://urcsoftware.com
and www.urcsoftware.com
Dear Sir:
Please be advised that Rosensteel Law (the Firm) represents
Universal Remote Control, Inc., a New York corporation (URC) and
has been authorized to issue this letter by URC.
The Firm is writing this letter as an initial step to combat the
software piracy against URC Complete Control Program (URC CCP
Software) engaged in via http://urcsoftware.com and
www.urcsoftware.com.
As a background, please note the following:
1. URC is a manufacturer of remote control devices.
2. URC sells the URC products only through its authorized
dealers and distributors in the U.S. and other countries.
3. None of URC PC Programmable remotes or its Total Control
whole-
house products are authorized for online internet distribution,
in whole or in part, including any software.
4. URC CCP Software is the URCs software suite for programming
certain
URC remote control devices.
E-MAIL [email protected] ADMITTED NJ & NY
ROSENSTEEL LAW WWW.ROSENSTEELLAW.COM
-
ROSENSTEEL LAW
September 17, 2013
2
5. Only URCs authorized dealers and distributors are permitted
to download and distribute URCs software required to program URC
remote control devices, including but not limited to the URC CCP
Software.
6. Such downloading of the URC CCP Software requires URCs
authorized dealers to pay for the license fee.
It has come to URCs attention that recently, you registered the
domain name of urcsoftware.com via PrivacyProtect.org (Please see
Exhibit 1), and started to offer free reproduction and distribution
of the URC CCP Software on http://urcsoftware.com and
www.urcsoftware.com, without any authorization from URC, via direct
linkage to the professional piracy website known as
www.thepiratebay.sx. (Please see Exhibit 2).
As you are aware, www.thepiratebay.sx is an illegal piracy site
(Please see Exhibit 3). You are hereby notified that your conduct
is illegal. It violates applicable U.S. and international law, and
constitutes copyright infringement of the URC CCP Software and its
related documentation, as well as trademark infringement to the
trademark URC (U.S. Reg. No. 3629207). You are further hereby
notified that both you and the downloader of the URC CCP Software
via http://urcsoftware.com and www.urcsoftware.com are liable for
damages (including statutory penalties) to URC. For the above
reasons, you are hereby requested to immediately:
1. Surrender the domain name of urcsoftware.com, and all of its
similar variations containing urc registered and maintained in any
country;
2. Discontinue the unauthorized offering of the URC CCP
Software, in any form,
including but not limited to removing such from
http://urcsoftware.com and www.urcsoftware.com and any other
internet sites operated or controlled by you, including but not
limited to www.thepiratebay.sx;
3. Surrender all illegal copies of the URC CCP Software in your
possession to URC;
and
4. Provide an explanation in detail as to how and from whom you
obtained the URC CCP Software.
We expect your full compliance and cooperation with the above no
later than September
30, 2013.
-
ROSENSTEEL LAW
September 17, 2013
3
URC is determined to vigorously protect URCs rights, and will
pursue all available legal
means to prevent illegal piracy of the URC software and other
illegal conduct adverse to URC.
This correspondence is submitted to you without prejudice to
other or different demands, rights or remedies of URC, all of which
URC expressly reserves and does not waive.
Please note that URC takes this matter very seriously. Please be
guided accordingly. Very truly yours, By: ________________________
Edward M. Rosensteel Attorney at Law cc: PrivacyProtect.org
Report Abuse www.privacyprotect.org Universal Remote Control,
Inc.
09/17/2013 02:52:15 pm
SigPlus1
-
EXHIBIT 1
Exh
ibit
1
EXHIBIT 1
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
URC CCP Software Download
In order to get started programming your URC remote control, you
will first
need to download and install the URC Complete Control Program
softwaresuite. To download the software, click on the link
below.
Note: A torrent program is required in order to download this
file. Todownload a free torrent client look in the Help section
below.
Download
URC Complete Control Program - URCs software suite for
programming
your remote control.
Help
uTorrent - A free client for downloading torrent files.
Beginners Guide to Downloading Torrents
8 thoughts on URC CCP Software Download
Total Visitors
HOME
SharkRaidAugust 25, 2013 at 2:06 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
So my case is a little different. Unlike most everyone else whos
commented
here I wasnt looking for the software for a pre-existing remote
that I owned.
I just bought a MX-890 on eBay for around $350 and thanks to you
guys will
be able to program it as soon as it arrives. Now just need to
pick up a cheap
MRF-350 soon and I will be all set. Going through a dealer I
would have
been paying $500 + $250 + (~200 in programming) = almost $1000.
Finding
a MRF-350 for around $100 shouldnt be too hard on eBay so my
total all-in
shouldnt be more than around $450. Saved over $500 THANKS!!
Reply
After installing the CCP program Im having an issue with
retrieving the
programming from my remote. Does it automatically load up or is
there
something that I need to do? I connected the USB cable and
started CCP
but it is asking for me to start a new file.
Any help would be appreciated, thanks!
Reply
After opening CCP choose the Empty option (No Rooms, No
Remotes) then hit X to close the window that pops up asking you
to
setup the home layout. Then click on the Communications tab
in
the toolbar near the top and then click on the button Get
from
Remote. Have your remote connected to your computer before
doing this and you should be able to get your remotes
programming
on your system.
Good luck!
Reply
TomAugust 21, 2013 at 10:20 am
Eczeema18August 22, 2013 at 8:51 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
WOAH! THANKS SO MUCH WORKS PERFECT
Reply
Can confirm this works. Just downloaded it with uTorrent and
followed the
instructions in the guide to download the software. Installed it
on my
Windows 7 laptop and was able to pull the software from the
remote onto my
computer.
Scanned the file with my virus scanner first and it came up
clean. Thank you
very much.
Reply
Ive owned my URC remote for 5 years now. The system was
installed and
had quirky problems involving some of the button macros.
Technicians had
to come back several times to modify the remote programming.
After a few
years and over $1000 in service visits, the on/off doesnt
reliably turn off or
on ALL devices. Again, it is quirkyi.e., it sometimes does and
sometimes
does not.
Finally, I decided to take this into my own hands and so tried
to find the
programming manual and software for my device. After calling the
Universal
Remote Control factory I learned that the software and
programming
manuals are available only to dealers.
Tim CarmikleAugust 21, 2013 at 7:21 am
HWalkenAugust 20, 2013 at 6:32 pm
J. BaldwinAugust 20, 2013 at 12:31 am
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Thank you so much for providing the software here. I am sick and
tired of
paying professionals who cant solve simple problems with this
thing.
If you dont want to have to be held captive to professionals for
your AV
system, DO NOT make my mistake. Buy the device and program it
yourself.
Reply
WOAH. Thanks. You just saved me another $150. Lets see, last
year I spent
over $500 on updates. No anymore!
Reply
Thank you very much for sharing this. I love my URC remote but
am sick
and tired of having to pay someone anytime I need to make a
minor change
to my programming.
Reply
Leave a Reply
Your email address will not be published. Required fields are
marked *
Name *
Email *
JosephAugust 19, 2013 at 5:57 pm
AaronAugust 19, 2013 at 3:17 pm
-
URC Software & Guides | A site for URC Remote DIY Fans
http://urcsoftware.com/[8/28/2013 2:29:42 PM]
Website
Comment
You may use these HTML tags and attributes:
Proudly powered by WordPress
-
EXHIBIT 2
Exh
ibit
2
EXHIBIT 2
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Details for this torrent
Search Torrents | Browse Torrents | Recent Torrents | TVshows |
Music | Top 100
Audio Video Applications Games Other All
Search here...
Type:Files:Size:
Tag(s):
Uploaded:By:
Seeders:Leechers:Comments
Info Hash:
Applications > Windows1692.37 MiB (726004673 Bytes)
Universal Remote Control URC CCPComplete Control Program MX-890
MX-780 MX-980 MX-1200 MX-5000
2013-08-22 17:43:59 GMTAnonymous
733
3914A43C52B03D572352F7138DF0461B90A26D9D
URC Complete Control Program (CCP)
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD(Problems
with magnets links are fixed by upgrading your torrent client!)
URC's Complete Control Program is a software suite for
programming the entire range of URC Professional Remotes that fall
under the Complete Control line of products.Complete Control
Program has the ability to control the following remote models:-
MX-780- MX-880- MX-880z- MX-890- MX-900- MX-980- MX-1200- MX-5000-
MX-6000- KP-900- KP-4000- MRX-1- MRF-260- MRZ-260- MRF-350-
MSC-400Compatible with Windows XP, Vista, Windows 7 & Windows
8Version: CCPSetup 03-26-2013Filename: CCPSetup_2013_03_26.rar
GET THIS TORRENT ( GET TORRENT FILE) ANONYMOUS DOWNLOAD
Comments
MastahRiz at 2013-08-23 03:47 CET:
Verified - working. Thanks uploader.
-
URC Complete Control Program (CCP) (download torrent) - TPB
http://thepiratebay.sx/torrent/8838767[8/28/2013 2:31:26 PM]
Login | Register | Language / Select language | About | Legal
threats | Blog Contact us | Usage policy | Downloads | Promo |
Doodles | Tag Cloud | Forum | PirateBrowser
Bayfiles | BayImg | PasteBay | Proxy | Follow TPB on Twitter |
Follow TPB on Facebook
6.362.992 registered users. Last updated 20:20:05.41.815.099
peers (32.136.530 seeders + 9.678.569 leechers) in 5.390.516
torrents.
BitCoin: 1KeBs4HBQzkdHC2ou3gpyGHqcL7aKzwTveLiteCoin:
LiYp3Dg11N5BgV8qKW42ubSZXFmjDByjoV
Orange82 at 2013-08-23 04:33 CET:
Mr.zenar98 at 2013-08-23 11:21 CET:
Confirm this works on Win 7. Thanks for uploading.
fantastik !!!!!
-
EXHIBIT 3
Exh
ibit
3
EXHIBIT 3
-
Whois Domain Lookup Search - Whois Lookup: Find Who Registered a
Website, Check Domain Name
http://www.register.com/whois.rcmx[8/28/2013 4:01:01 PM]
Protect assets from personal liability
Advertisement
About Us | Become an Affiliate | Advertising with Register |
Become a Reseller | Partner Offers
1995-2013 by Register.com . Please read our Disclaimer, Privacy
Notice, Services Agreement, Dispute Policy, and DMCA Notice.
Call us toll free at 1.888.734.4783; Outside the US please call
1.902.749.2762
Whats New in IBM Cognos 10.2 View the Free Demo Now.IBM Business
Intelligence www.IBM.com/New_Cogn
Customer Support Log In Cart (0)Speak to a web expert. Call us
toll free at 1.888.734.4783
Network Monitoring Tool
Monitor WAN, LAN, Servers, Apps, URLs, Event Logs & More.
Free Trial
OpManager.ManageEngine.com
Whois LookupCheck to see who has registered any Web address. If
theWeb address is available, you can register it
throughRegister.com.
EXAMPLE: mybrand.com
The domain extension .sx is invalid.
Need help with international characters or special symbols?
5 - Exhibit 2 - Pirate bay site.pdfthepiratebay.sxURC Complete
Control Program (CCP) (download torrent) - TPB
7 - Exhibit 3 - whois - thepirateby.sx.pdfregister.comWhois
Domain Lookup Search - Whois Lookup: Find Who Registered a Website,
Check Domain Name
11 - Executed RL Letter to urcsoftware - Complete.pdf3 - Exhibit
1 - URC Software site.pdfurcsoftware.comURC Software & Guides |
A site for URC Remote DIY Fans
5 - Exhibit 2 - Pirate bay site.pdfthepiratebay.sxURC Complete
Control Program (CCP) (download torrent) - TPB
7 - Exhibit 3 - whois - thepirateby.sx.pdfregister.comWhois
Domain Lookup Search - Whois Lookup: Find Who Registered a Website,
Check Domain Name
13 - Executed RL Letter to privacy protection - Complete.pdf3 -
Exhibit 1 - URC Software site.pdfurcsoftware.comURC Software &
Guides | A site for URC Remote DIY Fans
5 - Exhibit 2 - Pirate bay site.pdfthepiratebay.sxURC Complete
Control Program (CCP) (download torrent) - TPB
7 - Exhibit 3 - whois - thepirateby.sx.pdfregister.comWhois
Domain Lookup Search - Whois Lookup: Find Who Registered a Website,
Check Domain Name
9 - Exhibit 4 - Executed RL Letter to urcsoftware -
Complete.pdf3 - Exhibit 1 - URC Software site.pdfurcsoftware.comURC
Software & Guides | A site for URC Remote DIY Fans
5 - Exhibit 2 - Pirate bay site.pdfthepiratebay.sxURC Complete
Control Program (CCP) (download torrent) - TPB
7 - Exhibit 3 - whois - thepirateby.sx.pdfregister.comWhois
Domain Lookup Search - Whois Lookup: Find Who Registered a Website,
Check Domain Name
JheS5zeC90b3JyZW50Lzg4Mzg3NjcA: form3: q:
input17:
audio:
video:
apps:
games:
other:
category: 0
dpc3Rlci5jb20vd2hvaXMucmNteAA=: whoisDomainForm: domainName:
thepiratebay.sx
input2:
R0cDovL3VyY3NvZnR3YXJlLmNvbS8A: form3: author:
email:
url:
submit:
comment: