Unitrap Assembly Instructions 1 For more information, contact: Drew Carleton Office: (506) 452-3540 Cell: (506) 260-9074 [email protected].

Unitrap Assembly Instructions1

For more information, contact:Drew Carleton Office: (506) 452-3540Cell: (506) [email protected]://www.budwormtracker.ca

Trap Components

• 1 lure basket• 1 pheromone lure• 1 trap lid• 1 funnel • 1 trap bucket• 1 cord for hanging the trap • 1 Vaportape™ insecticidal

strip and wire

2

Note:At the season’s end, dispose of the pheromone and Vaportape™ insecticidal strip. Clean the trap with warm soapy water. Store in a cool and dry place.

Insecticidal Strip

Bucket

Hanging cord

Lid

Funnel

Pheromone lure

Lure cap

Lure basket

3

Insecticidal Strip Package

Wear vinyl gloves.4

It is very important to wear your vinyl gloves when handling the pheromone lure and insecticidal strip.

Place the pheromone lure in the lure basket. Carefully put the cap on, the basket is very fragile.

Note:Do not touch the pheromone with bare hands as it can decrease the lure’s effectiveness.

5

Snap the lure holder onto the lid of the trap.

6

Open the Vaportape™ envelope and place the insecticidal strip in the wire at the base of the funnel.

7

Connect the funnel and the bucket together with a twist.8

Mount the trap onto a sturdy branch of your chosen softwood tree, balsam fir or spruce. The trap should be five or more metres into the woods. Note: Secure trap at eye level, ensuring that access is easy. This helps avoid damage from wildlife.

9

The height from the branch to the base of

the tree should be approximately 1.5 to

2 meters.

10

We thank you for your time and for choosing to be a part

of this project. Welcome to the Budworm

Tracker team and happy tracking!