Unimet AS 260 - industrialsalesgroupllc.com · UNIMET AS 260 is a water-soluble, semi-synthetic metalworking fluid designed to give you excellent machining, reduced foaming, and full

OemetaTheCoo!antCompany

UNIMET AS 260

Chlorine FreeCreating a safer work environment

Low ConsumptionProvides great flushing and washingcharacteristics lowering consumption

Excellent Corrosion ProtectionGreat protection against corrosion witha combination of oil content and additives

Great Foaming BehaviorGreat foam control even in soft waterand high pressure

Great Durability Great stability, long sump life and strongbio-stability

Good LubricityProvides good cutting lubricity due toquality mineral oil base

Cost EffectiveWith low consumption and a competitiveprice point

Good Material CompatibilityMachines most ferrous and non-ferrousmaterials

Good lubricity for light and medium machining on most ferrous andnon-ferrous materials

Oemeta Inc. - USA 5655 West 610 SouthSalt Lake City, UT 84104(801) 953-0134 - [email protected]

Oemeta North America - Canada 265 Ingersoll St, Unit BIngersoll, Ontario N5C 3J7(519) 485-1800 - [email protected]

UNIMET AS 260 is a water-soluble, semi-synthetic metalworkingfluid designed to give you excellent machining, reduced foaming,and full corrosion protection in a wide range of manufacturing applications.

The UNIMET AS 260 has the capabilities to be used in light andmedium machining applications. It’s highly stable low foam form-ulation makes the UNIMET AS 260 a great choice for operationand maintenance managers world wide.

UNIMET AS 260 is widely used in small metal working facilitiesbecause of it’s versatility in different applications. Midsize andlarge metal working facilities choose UNIMET AS 260 for it’s

Test Strip Chart

Application Chart

Description

Oemeta Inc. - USA 2339 Decker Lake Blvd.Salt Lake City, UT 84119(801) 953-0134 - [email protected]

Oemeta North America - Canada 265 Ingersoll StIngersoll, Ontario N5C 3J7(519) 485-1800 - [email protected]

lubricity and outstanding machining performance especially withmaterials like cast iron and steel.

Switching to the powerful combination of UNIMET AS 260 and Oemeta’s technical support program will significantly improve your productivity and reduce your costs.

Oemeta - metalworking coolants from specialistsfor specialists.

OemetaTheCoo!antCompany

Unimet AS260

Refract Index: 1.4

1.4% 2.4% 3.7% 4.7% 6.8% 8.4%Refractometer readings only give properresults with fresh emulsions. Contaminationwith tramp oil, particles and other sub-stances distort the reading on emulsions inuse. Test strip readings used with refract-ometer readings however can help de-termine contamination levels.

Good Good High High

Test Strip Colors

Too Low Too Low

Not Recommended: OK: Good: Great:

- + ++ +++3-5% 6-9% 9-12%

Conventional Grinding

Creep Feed Grinding Turning Milling Drilling Deep Drilling Reaming Broaching

Aluminum ++ + ++ ++ + + + +

Cast Iron +++ +++ +++ +++ +++ ++ ++ ++

Ceramics + + + + + - - -

Composites ++ + + + + + + +

Glass + + + + + - - -

Inconel ++ + + + + + + +

Plastic ++ + ++ ++ ++ ++ ++ ++

Steel +++ ++ ++ ++ ++ ++ ++ ++

Stainless Steel +++ ++ ++ ++ ++ ++ ++ ++

Titanium ++ + + + + + + +

Yellow Metal ++ + ++ ++ ++ + + +

MaterialsProcess

Oemeta Inc. - USA 5655 West 610 SouthSalt Lake City, UT 84104(801) 953-0134 - [email protected]

Oemeta North America - Canada 265 Ingersoll St, Unit BIngersoll, Ontario N5C 3J7(519) 485-1800 - [email protected]