Underscreed Brochure

Regupol® underscreed range High performance acoustic screed isolation

Sustainable systems All products in the RAME portfolioare carefully developed based onenvironmental as well asacoustic performance –delivering access to highquality yet sustainablesystems.

Technical support With a fully trained technical

services team, RAME canprovide free support at every

stage of a project – fromspecification through to

installation.

Fully stocked warehousesThrough fully stocked regional

warehousing facilities, RAME ensuresthe cost effective, efficient and reliable

delivery of all Regupol® products, acrossthe breadth of the Middle East.

Regupol®underscreed range

Flexible & sustainable acoustic isolation The Regupol® range of acoustic isolation materials offers

the broadest choice of underscreed materials in theMiddle East. Delivering various levels of impact sound

insulation and load bearing capacities, Regupol®

underscreed products are guaranteed to deliver the mostcost effective yet high performing system for any

development.

Offered exclusively in the Middle East by RegupolAcoustics Middle East (RAME), the underscreed range

includes Regupol® 7210C, Regupol® E48, Regupol®

6010BA and Regupol® 6010SH. Manufactured from fullyrecyclable materials and without b lowing agents, these

systems meet the LEED (Leadership in Energy andEnvironmental Design) requirements for VOC, recyclability

and sustainability.

Compatible with all types of subfloors and screeds,Regupol® underscreed systems are a flexible specification

and have been independently proven to achieve superiorimpact sound control, even in the most demanding of

applications.

RAME holds Regupol® products as stock in regionalwarehouses, enabling the efficient delivery and consistent

supply of all systems in the underscreed range.

Simple to install Regupol® underscreed systems are quick and easy to

install, with comprehensive installation guidelines availableon request.

It is important that prior to installing Regupol® materials,base floors are clean, flat and dry. The materials should

also be unwound and left for a minimum 8 hours or ideallyovernight at the place where they are to be installed, to

allow for any potential shrinkage.

The materials should be cut to size with a sharp craft knifeand straight edge. Joints should be taped with Regupol®

tape. Regupol® E48 and Regupol® 6010BA should beinstalled dimple side down.

For all Regupol® underscreed materials, RAME providesfree technical guidance and on-site support during the

installation process.

Regupol® 7210C is a cost effective rubber-bound product,manufactured from recycled materials. Compatible with all types offloor screed, this high performing isolation solution delivers superiorimpact and airborne performance.

Regupol® 7210C is quick and easy to install, and because separateperimeter strips are not required, using this system helps ensure an efficientand reliable installation.

Cost effective screed isolation

ApplicationsRegupol® 7210C is designed for applications where superiorand cost effective impact sound control is required. It isparticularly suited to the following developments:

• Apartments• Hotels• Retail• Education

Features & benefits •Excellent impact and airborne performance•Offers long term performance without collapse or“bottoming” out under high point loads

•Quick and easy to install with no need for separateperimeter strips

•Minimises construction heights •Supplied in easy to handle sheets •Mildew and moisture proof •Zero global warming potential (GWP) and zero ozonedepletion potential (ODP)

Specification

Installation

Physical InformationSheet length 2250mm Sheet width 1150mmMaterial thickness 5mm

Technical Information

Density 720kg/m3

Tensile strength (DIN 53571) approx 0.5N/mm2

Thermal conductivity approx 0.14W/mK

Elongation at break approx. 75%

Temperature resistance -40ºC to +110ºC

Airborne sound insulation (DnT,w + Ctr) 49dBImpact sound insulation (L’nT,w (Ci)) 46dB

�LW (impact improvement) 20dB (BS EN ISO 140-8:1998)

4

Regupol® 7210C

For example purposes only

For example purposes only

For example purposes only

For example purposes only

For example purposes only

1 3 5

68

531 6

55 6

9

55 6

9

1 65mm sand cement screed or minimum 40mm proprietary screed2 Taped joint*3 0.2mm waterproof membrane4 Joint detail5 Regupol® 7210C 5mm layer6 Concrete slab7 Perimeter detail8 Acoustic cavity closer9 Regupol® hi-tack tape

* DPM overlap to be minimum 100mm

1

2

3

4

5

6

7

Perimeter Detail7

Joint Detail (overlapped)4

Alternative Joint Detail (butted)4

Regupol® E48 is a recycled tyre crumb product designed to isolatescreeds from the main structure of the building, reducing impactenergy generated by general footfall.

With a dimpled surface on one side, which increases air movement anddissipates energy in channels, Regupol® E48 offers enhanced isolationperformance and delivers impact sound insulation of 47dB, even underheavy loads.

Enhanced isolation performance

ApplicationsRegupol® E48 has been developed to offer enhanced isolationand impact sound performance in the following areas:

• Apartments • Hotels • Schools • Hospitals • Retail

Features & benefits • Excellent impact and airborne performance• Offers long term performance without collapse or

“bottoming” out under high point loads• Resistant to ageing and deformation • Quick and easy to install with no need for separate

perimeter strips • Minimises construction heights • Mildew and moisture proof • Zero global warming potential (GWP) and zero ozone

depletion potential (ODP)

Specification

Installation

Important Note:Regupol® E48 must be installed dimple side down.

Physical InformationRoll width 1.15m Roll lengths 13mMaterial thickness 8mm nominal (dimpled surface on one side)

Technical InformationDensity approx 600kg/m3

Tensile strength (DIN 53571) approx 0.5N/mm2

Thermal conductivity approx 0.14W/mK

Elongation at break approx 47%

Mean Value of Dynamic Stiffness 47MN/m3

Maximum load bearing capacity 3000kg/m2 (30kN/m2)

Temperature resistance -40ºC to +110ºC

Airborne sound insulation (DnT,w + Ctr) 49dB

Impact sound insulation (L’nT,w (Ci)) 47dB

�LW (impact improvement) 20dB (BS EN ISO 140-8:1998)

5

Regupol® E48

1 3 5

68

1 65mm sand cement screed or minimum 40mm proprietary screed2 Taped joint*3 0.2mm waterproof membrane4 Joint detail5 Regupol® E48 8mm layer6 Concrete slab7 Perimeter detail8 Acoustic cavity closer9 Regupol® hi-tack tape

* DPM overlap to be minimum 100mm

1

2

3

4

5

6

7

531 6

55 6

9

55 6

9

For example purposes only

For example purposes only

For example purposes only

For example purposes only

For example purposes only

Perimeter Detail7

Joint Detail (overlapped)4

Alternative Joint Detail (butted)4

Manufactured from recycled tyre crumb, Regupol® 6010BA is a highload bearing screed isolation solution. Delivering effective isolationand impact sound insulation, even under heavy loads, Regupol®6010BA is often the preferred choice for premium developments andthose where superior acoustic performance is critical.

High load bearing isolation

ApplicationsRegupol® 6010BA delivers a high end isolation solution forprestigious developments and areas where heavy loads areapparent. These include:

• Luxury apartments • Penthouses • Hotels • Cinemas/Theatres• Schools • Hospitals • Libraries • Retail • Gymnasiums

Features & benefits • Excellent impact and airborne performance• Minimal creep, even under high loads• Resistant to ageing and deformation • Quick and easy to install • Mildew and moisture proof • Zero global warming potential (GWP) and zero ozone

depletion potential (ODP)

Specification

Installation

Important Note:Regupol® 6010BA must be installed dimple side down.

Physical InformationRoll width 1.25m Roll length 10mMaterial thickness 17mm nominal (dimpled surface on one side)

Technical InformationMean value of dynamic stiffness 19MN/m3 (DIN EN 29052-1)Density 590kg/m3

Tensile strength (DIN 53571) approx 0.3N/mm2

Thermal conductivity approx 0.14W/mKElongation at break approx 60%Maximum load bearing capacity 5000kg/m2 (50kN/m2)

Temperature resistance -40ºC to +110ºC

Airborne sound insulation (DnT,w + Ctr) 49dB

Impact sound insulation (L’nT,w (Ci)) 38dB

�LW (impact improvement) 43dB (BS EN ISO 140-8:1998)

6

Regupol® 6010BA

1 3 5

6

11

10

8

11

10

1 65mm sand cement screed2 Taped joint*3 0.2mm waterproof membrane4 Joint detail (butted only)5 Regupol® 6010BA 17mm layer6 Concrete slab7 Perimeter detail8 Acoustic cavity closer9 Regupol® hi-tack tape10 Acoustic sealant11 Perimeter edge strip

* DPM overlap to be minimum 100mm

1

2

3

4

5

6

7

531 6

55 6

9

For example purposes only

For example purposes only

For example purposes only

For example purposes only

Joint Detail (butted)

Perimeter Detail7

4

A recycled tyre crumb product, Regupol® 6010SH has beenspecifically developed for heavy load bearing areas where acousticperformance is critical. A sustainable and high performing screedisolation solution, Regupol® 6010SH delivers the greatest loadbearing capacity in the RAME underscreed range.

High performance screed isolation

ApplicationsDesigned for a wide range of high performance isolationapplications, Regupol® 6010SH is particularly suited to heavilyloaded areas in:

• Luxury apartments • Penthouses • Hotels • Schools • Hospitals • Libraries • Retail • Music studios

Features & benefits • Excellent impact and airborne performance• Offers long term performance without collapse or

“bottoming” out under high point loads• Resistant to ageing and deformation • Quick and easy to install • High quality and exact material thickness guaranteed • Mildew and moisture proof • Zero global warming potential (GWP) and zero ozone

depletion potential (ODP)

Specification

Installation

7

Regupol® 6010SH

For example purposes only

For example purposes only

For example purposes only

1 3 5

6

11

10

8

11

10

1 65mm sand cement screed2 Taped joint*3 0.2mm waterproof membrane4 Joint detail (butted only)5 Regupol® 6010SH 10mm or 15mm layer6 Concrete slab7 Perimeter detail8 Acoustic cavity closer9 Regupol® hi-tack tape10 Acoustic sealant11 Perimeter edge strip

* DPM overlap to be minimum 100mm

1

2

3

4

5

6

7

531 6

55 6

9

Joint Detail (butted)

Perimeter Detail7

4

Physical InformationRoll width 1.25mRoll length 10mMaterial thickness 10mm & 15mm nominal

Technical InformationMean value of dynamic stiffness 28.8MN/m3 (DIN EN 29052-1)Density 595kg/m3

Tensile strength (DIN 53571) approx 0.40N/mm2

Thermal conductivity approx 0.14W/mKElongation at break approx 70%Maximum load bearing capacity 10000kg/m2 (100kN/m2)

Temperature resistance -40ºC to +110ºC

�LW (impact improvement) 30dB (BS EN ISO 140-8:1998)

Regupol Acoustics Middle East FZEP.O. Box 125279, Dubai, UAE

Phone: +971-4-3233493Fax: +971-4-3406295

[email protected]

Regupol® is an official trademark of BSW

call +971-4-3233493www.regupolacousticsmiddleeast.com

Regupol Acoustics Middle East (RAME) is the Middle East arm of market-leading Regupol®

manufacturer, BSW. Providing exclusive access to the full range of Regupol® impact soundsystems, RAME is setting the standard for sound control in the Middle East.

From specification through to project completion, RAME has a fully trained technical team ableto provide free advice and on-site support as well as guidance during installation. This

combined product and service offering has led to Regupol® being used on a number of highprofile projects, including Dubai Healthcare City and the Marina Hotel, Abu Dhabi. For further

information and advice, please contact the RAME technical sales team.