49 ▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Stronger safety chain loops - 5/8" instead of 1/2" ▪ Grade 8 hardware ▪ Fortified center section and kit designs ▪ Limited Lifetime Warranty Flip-Over Ball ▪ EZr ball storage helps avoid trailer ball loss ▪ Truck bed is free of obstruction when flipped down ▪ Attractive, chrome-plated trim ring, rubber trim piece and cover make for a finished look ▪ Rubber cover included Sturdy Reversible Handle ▪ Heavy duty handle, with comfort grip, will not bend ▪ Can be positioned on either side of the truck Double Lock Security ▪ Double-locking pins for peace of mind 11-16 Chevrolet / GMC CT 60611 01-10 Chevrolet / GMC CT 60609 11-13 Dodge Ram CT 60612 10-16 Ford CT 60612 UNDER-BED DOUBLE LOCK EZr GOOSENECK HITCH Exclusive center locator To create a pilot hole... Simply drill up from under the bed... For worry-free truck-bed drilling EASY TO INSTALL - CURT Exclusive Center Locator Installation Tool ▪ Eliminates the need to measure where the ball hole should be in the truck bed ▪ Eliminates errors caused by drilling ▪ Indicates when to stop drilling the ball hole in the top of the bed - you’ll see orange shavings ▪ Pulls out through the ball hole and is discarded ▪ Included with all Double Lock EZr goosenecks EZr INSTALLATION KITS 11-18 Silverado/Sierra 2500/3500 HD CT 60624 06-13 Ram 2500/3500 CT 60660 11-16 F-250/F-350 Super Duty CT 60645 EZr INSTALLATION KITS ▪ Designed for faster, easier installation ▪ No need to lower exhaust on Ford, Chevy or most Dodge trucks ▪ No need to relocate cable hanger and ground wire on Dodge trucks ▪ Uses carriage bolts when possible so only one wrench is needed ▪ Eliminates the need to cut sheet metal along inside of fender to insert rails ▪ Drill safety chain loop holes from underside of truck bed, no measuring required ▪ Can be installed by one person See page 130 for MUD FLAPS B&W TURNOVERBALL ™ - GOOSENECK HITCH CONVERTS TO A LEVEL BED IN SECONDS ▪ 30,000 lb. GTW / 7,500 lb. VTW ▪ Solid, machined 2-5/16" ball ▪ Durable powder-coat finish ▪ Only a 4" hole in the bed ▪ Bolts to existing holes in the frame with no drilling or welding ▪ Solid, one-piece machined receiver socket ▪ Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball ▪ Limited Lifetime Warranty Remove Ball Turn Ball Over Replace Ball In Socket Turnoverball ™ Accessories Kingpin BNWGNXA4000 4" Extender (20,000 lb. GTW / 5,000 lb. VTW) BNWGNXA4085 Eyelet BNWGNXA4075 Inverted Ball BNWGNXA4025 2-5/16" Replacement Ball BNWGNXA2000 3" Ball BNWGNXA2025 Hi-Rise Ball (1" taller than standard ball) BNWGNXA2050 A hitch when you need it... a level bed when you don’t. GOOSENECK HITCHES Proudly Made in the USA 4" Hole Saw P/N BNWGNASH0400 4" Hole Saw P/N BNWGNASH0400 * Mounting Kit has a shallow receiver socket and requires a special post (part # BNWRVP3521) when using the BNWRVK3500 Companion Fifth Wheel Hitch ** Uses 3-1/2” Hole Saw CHEVY/GMC 07-18 Silverado/Sierra 1500 6 ft. 6 in. Bed with Boxed Frame BNWGNRK1057 07-18 Silverado/Sierra 1500 8 ft. Bed with Boxed Frame BNWGNRK1007 16-18 Silverado/Sierra 2500/3500 BNWGNRK1016 11-15 Silverado/Sierra 2500/3500 BNWGNRK1012 01-10 Silverado/Sierra 2500 BNWGNRK1067 07-10 Silverado/Sierra 3500 (w/ 1 bed cross member over the axle) BNWGNRK1067 DODGE/RAM 09-18 Ram 1500 BNWGNRK1309* 13-18 Ram 3500** BNWGNRK1314 14-18 Ram 2500 BNWGNRK1384 10-13 Ram 2500/3500 Diesel Trucks (13 2500 Only) BNWGNRK1313 03-09 Ram 2500/3500 Gas or Diesel Trucks BNWGNRK1313 10-13 Ram 2500/3500 Gas Engine Trucks (13 2500 Only) BNWGNRK1308 06-13 Ram 1500/2500/3500 Mega-Cab Trucks (13 2500 Only) BNWGNRK1308 FORD 15-18 Ford F-150 BNWGNRK1115 04-14 Ford F-150 BNWGNRK1104 17-18 F-250/F-350 Super Duty 4WD BNWGNRK1117 17-18 F-250/F-350 Super Duty 2WD BNWGNRK1116 11-16 F-250/F-350 Super Duty, F-450 w/ factory installed bed BNWGNRK1111 99-10 F-250/F-350 Super Duty (08-10 F-450 w/ factory installed bed) BNWGNRK1108 08-10 F-450 with factory installed bed BNWGNRK1108 TOYOTA 07-16 Toyota Tundra All Beds BNWGNRK1257*
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
49
▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Stronger safety chain loops - 5/8" instead of 1/2" ▪ Grade 8 hardware ▪ Fortified center section and kit designs ▪ Limited Lifetime Warranty
Flip-Over Ball ▪ EZr ball storage helps avoid trailer ball loss ▪ Truck bed is free of obstruction when flipped down ▪ Attractive, chrome-plated trim ring, rubber trim
piece and cover make for a finished look ▪ Rubber cover included
Sturdy Reversible Handle ▪ Heavy duty handle, with comfort grip, will not bend ▪ Can be positioned on either side of the truck
Double Lock Security ▪ Double-locking pins for peace of mind
11-16 Chevrolet / GMC CT 6061101-10 Chevrolet / GMC CT 6060911-13 Dodge Ram CT 6061210-16 Ford CT 60612
UNDER-BED DOUBLE LOCK EZr GOOSENECK HITCH
Exclusive center locator
To create a pilot hole...
Simply drill up from under the bed...
For worry-free truck-bed drilling
EASY TO INSTALL - CURT Exclusive Center Locator Installation Tool ▪ Eliminates the need to measure where the ball hole should be in the truck bed ▪ Eliminates errors caused by drilling ▪ Indicates when to stop drilling the ball hole in the top of the
bed - you’ll see orange shavings ▪ Pulls out through the ball hole and is discarded ▪ Included with all Double Lock EZr goosenecks
EZr INSTALLATION KITS11-18 Silverado/Sierra 2500/3500 HD CT 6062406-13 Ram 2500/3500 CT 6066011-16 F-250/F-350 Super Duty CT 60645
EZr INSTALLATION KITS ▪ Designed for faster, easier installation ▪ No need to lower exhaust on Ford, Chevy or most Dodge trucks ▪ No need to relocate cable hanger and ground wire on Dodge trucks ▪ Uses carriage bolts when possible so only one wrench is needed ▪ Eliminates the need to cut sheet metal along inside of fender to insert rails ▪ Drill safety chain loop holes
from underside of truck bed, no measuring required
▪ Can be installed by one person
See page 130 for MUD FLAPS
B&W TURNOVERBALL™ - GOOSENECK HITCHCONVERTS TO A LEVEL BED IN SECONDS ▪ 30,000 lb. GTW / 7,500 lb. VTW
▪ Solid, machined 2-5/16" ball ▪ Durable powder-coat finish ▪ Only a 4" hole in the bed ▪ Bolts to existing holes in the frame with no drilling or welding ▪ Solid, one-piece machined receiver socket ▪ Flexible latch pin handle attached to a spring loaded, 5/8"
steel locking pin that goes completely through the ball ▪ Limited Lifetime WarrantyRemove Ball Turn Ball Over Replace Ball In Socket
Eyelet BNWGNXA4075Inverted Ball BNWGNXA40252-5/16" Replacement Ball BNWGNXA20003" Ball BNWGNXA2025Hi-Rise Ball (1" taller than standard ball) BNWGNXA2050
A hitch when you need it...a level bed when you don’t.
GO
OS
EN
EC
K H
ITCH
ES
Proudly Made inthe USA
4" Hole Saw P/N BNWGNASH0400
4" Hole Saw P/N BNWGNASH0400
* Mounting Kit has a shallow receiver socket and requires a special post (part # BNWRVP3521) when using the BNWRVK3500 Companion Fifth Wheel Hitch** Uses 3-1/2” Hole Saw
CHEVY/GMC07-18 Silverado/Sierra 1500 6 ft. 6 in. Bed with Boxed Frame BNWGNRK105707-18 Silverado/Sierra 1500 8 ft. Bed with Boxed Frame BNWGNRK100716-18 Silverado/Sierra 2500/3500 BNWGNRK101611-15 Silverado/Sierra 2500/3500 BNWGNRK101201-10 Silverado/Sierra 2500 BNWGNRK106707-10 Silverado/Sierra 3500 (w/ 1 bed cross member over the axle) BNWGNRK1067DODGE/RAM09-18 Ram 1500 BNWGNRK1309*13-18 Ram 3500** BNWGNRK131414-18 Ram 2500 BNWGNRK138410-13 Ram 2500/3500 Diesel Trucks (13 2500 Only) BNWGNRK131303-09 Ram 2500/3500 Gas or Diesel Trucks BNWGNRK131310-13 Ram 2500/3500 Gas Engine Trucks (13 2500 Only) BNWGNRK130806-13 Ram 1500/2500/3500 Mega-Cab Trucks (13 2500 Only) BNWGNRK1308FORD15-18 Ford F-150 BNWGNRK111504-14 Ford F-150 BNWGNRK110417-18 F-250/F-350 Super Duty 4WD BNWGNRK111717-18 F-250/F-350 Super Duty 2WD BNWGNRK111611-16 F-250/F-350 Super Duty, F-450 w/ factory installed bed BNWGNRK111199-10 F-250/F-350 Super Duty (08-10 F-450 w/ factory installed bed) BNWGNRK110808-10 F-450 with factory installed bed BNWGNRK1108TOYOTA07-16 Toyota Tundra All Beds BNWGNRK1257*
**See below for the proper installation kit for your application.
▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Flip-and-store ball helps avoid trailer ball loss and keeps truck bed free of obstruction ▪ Heavy duty handle can be positioned on either side of the vehicle ▪ Double-locking pins in trailer ball provides peace of mind ▪ Removable, chrome 2-5/16" trailer ball ▪ Chrome trim ring provides a finished look ▪ Spring-loaded safety chain loops and grade 8 hardware included ▪ Durable carbide powder coat finish ▪ Limited Lifetime Warranty
UNDER BED DOUBLE-LOCK GOOSENECK
P/N Make / Model Ball Size GTW / Vertical LoadCT 60607 Fits most application 2-5/16" 30,000 / 7,500 lbs.CT 60615 07-18 Chevy/GMC 1500 2-5/16" 30,000 / 7,500 lbs.
CT 60607
▪ Factory-style gooseneck trailer ball for quick and easy removal ▪ Quickly bolts in from underneath the truck bed in 45 minutes or less ▪ Includes heavy duty, 5/8" safety chain loops
**See below for the proper installation kit for your application.
▪ Up to 30,000 lbs. GTW / 7,500 lbs. vertical load ▪ Permanently attached trailer ball folds down and out of the way, eliminating theft or loss ▪ T-handle for easy use ▪ Spring loaded safety chain loops and grade 8 hardware included ▪ Limited Lifetime Warranty
Requires no additional hardware or installation kits
▪ Weight ratings are limited to vehicle manufacturer’s stated capacities ▪ Easy, one-person installation requires no lowering of exhaust or spare tire ▪ No drilling necessary except the truck bed holes ▪ Installation also requires no welding, bed flange trimming or bed removal ▪ Included patented 2 5/16" ball eliminates the need for a side handle ▪ Heavy-duty 5/8" safety chain loops for a reliable connection ▪ Tested for safety in accordance with SAE J2638 ▪ Protected by a highly durable, rust-resistant, liquid A-coat ▪ Limited Lifetime Warranty
OEM-STYLE GOOSENECK HITCH FOR FORD
productnewP/N Make / Model GTW / Vertical LoadCT 60700 2017 F-250/F-350 Super Duty 30,000 / 7,500 lbs.
51
4" OFFSET BALLP/N CT 60602
Rated for 20,000 lb.
HIGH RISE BALLP/N CT 60603
Rated for 30,000 lb.
DOUBLE-LOCK GOOSENECK BALLS
▪ 20,000 lb. rated cushioned 360° ▪ Safety chains standard ▪ Fail safe king pin adapter
CUSHIONED 5TH WHEEL TO GOOSENECK ADAPTERP/N CV C5G - Convert-A-Ball®