ULTRA SERIES INKJET PRINTER USER MANUAL
Thanks for using ULTRA series printers of Shanghai Wit-color
Digital Science & Technology Co., Ltd. To ensure all operations
will be taken in accurate and safe way, all operations should be
carried out based on well understanding to the performance and
capability of printers. Please keep this manual properly. Wit-color
equipment user manual and printing program are only for the use of
legal authorized individuals. Without companys permission, any form
of copy, modification, exchange or publications to the content are
prohibited. Any action against the above demands will bear criminal
and civil obligations. Details contained in this manual may be
subject to change with notice. We had tried our best to edit this
manual and examine all products, it will be highly appreciated if
you can find any error in printing and inform us.
Shanghai Wit-color Digital Science & Technology Co., Ltd.
All Rights Reserved by Wit-color Corp
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
1
ULTRA SERIES INKJET PRINTER USER MANUAL
To facilitate the contacts, you can communicate with us in the
following way. A. Please read user manual first and get direct
help. B. Please browse our web site www.wit-color.cn and read the
part of Technique Support, we will provide some measures for
solving the updating technique questions. C. You can contact our
agents Technical Department or our branches by telephone. D. Please
contact Wit-color Technical Support Department by telephone.
Working time: 8:30-20:00 professional Engineer on duty. Fax
available from 20:00 to 8:30, our professional technicians will
contact you as soon as possible. E. Internet Technical support:
www.wit-color.cn E-mail: [email protected] MSN:
[email protected] F. Telephone of Shanghai After Sale
Service Center: 0086-2154881966 ext 117 Fax: 0086-21-54881617
Service Hotline: 13371971397 G. If you need spare parts, please
fill in the application form and fax to 0086-21-54881617 as
requested. H. If explanation in words is not effective, photos are
preferred.
Notice:Without the permission from manufactory, all distributors
and end-users can not exchange the spare parts privately. Spare
parts Repairing at unauthorized units and unoriginal spare parts
using are strictly prohibited. Otherwise, all damage caused by
these actions will be users responsibility. And then the
manufactory will stop all after service to the corresponding
printer. Tearing, scratching and exchanging of Bar Code and Serial
Number are strictly prohibited. Once this kind of case was found,
all after service to the corresponding printer will be
stopped.Please check the following information that you registered
to our Techincal Support department, so that we could provide
prompt service when any trouble occurs. (Please fax the following
information to Wit-color Technical Support Department at
0086-21-54881617 or 54889946 before installation.) Name Address
Contact Phone Mobile Phone Resolution Product Model 200DPI 720DPI
Product Code Dongle Code Printer Length 2.2M 2.6 M 3.3 M Fax e-mail
Printhead Quantity 4H 12H 16H 8H 6C 12H
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
2
ULTRA SERIES INKJET PRINTER USER MANUAL
ContentChapter 1 General Introduction of Printer Models5
1.1 Ultra860+5 1.2 Printer/Lite printer 6
Chapter 2
Installation Guide7
2.1 Safety Guide and Instruction7 2.2 Printhead Installation 8
2.3 Preparation for Installation9
Chapter 3
Control panel Introduction 10
3.1 Left printer box
10
3.2 Right printer box
10
Chapter 4
Circuit Diagram 11
4.1Ultra860+
12
Chapter 5
Mechanical Adjustment13
5.1 Adjustment of printing panel
13
Chapter 6
Software Guide
14
6.1 ULTRA Series software14 6.1.1 Installation of ULTRA software
14
6.1.2 Usage of ULTRA software 15 6.1.2.1 Introduction of ULTRA
software 15 6.1.2.2 Menu Structure of Controlling Program16 6.2 WIT
Series Software 24 6.2.1 Installation of WIT software 24 6.2.2
Usage of WIT Software28 6.2.2.1 General Introduction of WIT
Software28 6.2.2.2 Control Program Menu structure 29
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
3
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 7
Daily Maintenance29
7.1 Print head Daily Maintenancev29 7.2 Printer Daily
Maintenancev 31
Chapter 8
Trouble Shooting
8.1 Print Head Part 8.2 Ink Supply System 8.3 Heating System 8.4
Movement System 8.5 Media Feeding/Take up System 8.6 Computer
System 8.7 Delta Servo Controller error message solution
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
4
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 11.1 Ultra860+
Printer Model Introduction
1.2 printer/Lite printer AssemblyStep 1Open the packing wooden
box, take out the parts showed in the map and assemble as the
direction of arrowhead marked. Match all parts one by one, and then
tighten screws.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
5
ULTRA SERIES INKJET PRINTER USER MANUAL
Step 2Take out the parts and assemble as the direction of
arrowhead marked showed in the map. Match all parts one by one, and
then tighten screws.
Assembling finished printer is as the following map showed.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
6
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 2 Installation Guide2.1 Safety Guide and
InstructionNOTICE: Please follow the Warning and Instructions
labels on printers. Please read the following instructions before
running ULTRA Printers of wit-color Corp. Please do not spray any
chemical liquid into printer, or onto the electronic circuit board
or data cables. Power supply must meet requirements that marked on
printer. Please do not install the printer together with other
high-power equipments or in the same loop-line. Do not use broken
power supply cables. Please make sure the total ampere of all
equipments is not exceeding the rating ampere of electrical outlet.
Without enough knowledge, please do not repair the printer by
yourself. When the following occurs, please contact professionals.
Any damage of power supply cables or connection parts; Liquid
sprayed into the printers; Printer got strong mechanical knock.
Printer cannot work normally or evident changes in performance;
Please do not pull out the plugs or data cables before power off;
Please put the ink tank away from children, drinking or touching by
child are prohibited. If inks sprayed on skin, please wash with
soap and rinse thoroughly. If ink splashed into eyes, please flush
immediately and seek medical advice soon. Generally each three
months, please take the ink tanks off, clean thoroughly and dry up,
and then reuse. To guarantee the printing quality, to change new
clean ink tank is preferred. If printer with password, please pay
attention to the reminder interface that occured before the
password interface appearing. The conditions of temperature and
humidity of workshop should be constant, and printer should be away
from sunlight or powerful light or heating sources direct
irradiating. All equipments should be grounded well, and UPS system
is needed. To avoid the influences from computer, high
configuration computer is preferred.
Notice:If printer with password, please pay attention to the
reminder interface that occured before the password interface
appearing, to ensure your normal work schedule please collect
password from local seller/agent in time while the password
reminder interface occured.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
7
ULTRA SERIES INKJET PRINTER USER MANUAL
2.2 Print head InstallationStep 1: Check print heads appearance
and nozzle film carefully to confirm any damage exist before
installation. If without any abnormity, please flush all print
heads with solvent cleaning solution first and then start
installation. If you found any problem, please stop installation
and contact with Wit-Color company at once.
Notice: Print heads with problem at your knowledge are still
used will be out of warrantee.Step 2:
Map 1 Put printhead and heat sink flatwise, and put partand
parttogether slightly but not push and pull by force to close them
Step 3:
Map 2 Screw and fix part,,and in order tightly by even
force.
Notice: Please screw them by appropriate force and keep the
printhead fixed.Step 4:
Finished installation
Notice: More help and information for above operation, please
contact with technicalsupport department in time.Shanghai Wit-color
Digital Science &Technology Co., Ltd TEL: 0086-21-54881966 FAX:
0086-21-54889946 www.wit-color.cn E-mail: [email protected]
8
ULTRA SERIES INKJET PRINTER USER MANUAL
2.3 Preparation for Installation2.3.1 Site Requirement: machine
dimension: Model: L*W*H (Illustrate with Ultra720 printer) Model
Ultra 860+ Length 4.4M Width 0.8M Height 1.25M
Remarks: Enough space for image moving and airing purpose should
be left. 2.3.2 Workshop Environment Requirement: Basic conditions
for Printer workshop are as following: Location: away from wireless
radio sources Temperature : 20--- 25. Floor: clean easily and no
dust and static. Humidity: between 45% and 75%. Illumination: Pure
white light or daylight. 2.3.3 Workshop power supply requirement:
AC: 220v, 50HZ single-phase,1500W max. Alternating current power
must have a separate circuit switch. And the circuit should be
earthed separate from other equipments. And power should be
balanced, invariable, no effect from fluctuating of voltage. In the
area that power supply is not steady, UPS power supply with
capacitance of 2KV is preferred.
2.3.4
Preparations for Installation: 1. PC Workstation (Basic
Requirements: windows2000 or windows XP, P4 2.4G or 2.4G above,
memory KINGSTONE ddr512m (1 G is preferred), HD80G with high
stability) 2. Inks, cleaning solution, lint free wiper, media; 3.
UPS power supply is required (2kv absolute on-line) 2.3.5 Operator
requirements: All ULTRA series printers operators should be
qualified. The requirements are as following: *Be responsible for
printers operation and maintenance *Be responsible for
communicating with the WIT-COLOR technical support department.
*Capable of solving problems and repair printer with telephone or
fax support from manufactory; *Good command in speaking and writing
English. * Experienced in PC. *Knowledgeable in Electronics and
mechanism. *Sensitive to color, familiar with color theory. *With
the knowledge of printing procedure
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
9
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 33.1 Left Printer Box
Control Panel
Introduction
3.2 Right Printer Box
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
10
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 44.2 Ultra860+ map4.1-1/3
Electric Connection
Map 4.1-1
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
11
ULTRA SERIES INKJET PRINTER USER MANUAL
Map 4.2-2
Map 4.3-1Shanghai Wit-color Digital Science &Technology Co.,
Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn
E-mail: [email protected]
12
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 5
Mechanical Adjustment
Tools: Dial indicator and standard minipad (Thickness=3mm).
Operation Procedure: Fix Dial Indicator on the Linear Motion Block,
and then check the number which shown on dial indicator while
slowly moving dial indicator from left to right. Through adjusting
the position of screws (under the plate) to make the plate even
until the numbers showed on dial indicator are almost same during
its moving on plate in the left, middle and right part of the
plate. The usage of minipad: Insert 2 minipads between the
printhead plate and printer plate (measure from 2 points). The
distance between printhead plate and mechanical plate will be 3
mm(The thickness of minipad). The tolerance is about 0.5 MM.
Importance of adjustment: The plate adjustment will affect the
resolution of printing image. Due to uneven plate, you may find
different resolutions on left and right part of the image. The
uneven plate will cause pintch roller pressure uneven also, thus
the media will crinkle, and finally scratch the surface of Print
head plate. Notice The plate adjustment must be done after the
printer installation. The pintch roller should be pressed on the
plate during plate even adjustment. The purpose of plate adjustment
is to keep printhead plate is parallel with the printing plate. The
specifications for plate adjustment attached on the back of Quality
Certificate for your reference.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
13
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 6 Software Usage Guide6.1 ULTRA Series software 6.1.1
Installation of ULTRA software (Illustrate by Ultra720+/H12, and
the operation is applicable for any model printer)1. Insert the
disk into CD driver; 2. Double click "My Computer" icon on
tabletop, Open window; 3. Double click CD driver icon; 4. Double
click SETUP icon, then click NEXT icon; (Shown as Map 6.1.1---
6.1.4)
Map 6.1.1
Map 6.1.2
Map 6.1.3 5. Install Dongle driver (Shown as Map
6.1.5&6.1.6)
Map 6.1.4
Map 6.1.5Shanghai Wit-color Digital Science &Technology Co.,
Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946
Map 6.1.6www.wit-color.cn E-mail: [email protected]
14
ULTRA SERIES INKJET PRINTER USER MANUAL
6. Install pixel board driver program: insert the pixel board
into PCI slot, then PC will find PCI equipment automatically,
driver programs location is under the path of C:\program
files\ultra*h\drivers.
6.1.2 Usage of ULTRA software 6.1.2.1 Introduction of ULTRA
software Illustrate by Ultra720+H12, and the operation is
applicable for any model printer. Do not change systems timing,
otherwise the dongle will be locked.1. Brief Introduction ULTRA
series printers are controlled by the software of Ultra Control
Center. Three document formats are acceptable for this software.
First one is RTL Format, which is the un-compressing output format
of RIP software; second one is PRN Format, which is the
un-compressing output format of RIP Software; third one is the
un-compressing output format of PRT, Which is the un-compressing
output format of certain RIP Software. Every format document can be
printed at Slow, Medium or Fast speed. And every speed has three
printing models: Normal, Enhanced and Ultra. Printer Density also
can be adjusted in certain range. Many operations could be
controlled simply from windows image interface of software by
mouse. PHOTOPRINT RIP software is recommended. (More details for
RIP software you may found in its User Manual). 2. Software Guide
Double click Ultra720+H12 Control Center icon on the tabletop of
computer, then controlling software starts. And then carriage moves
to left slowly till pressing the button of Starting point, the
carriage will go back and stop at print head cleaning station
point. Main image control interface will be on the PC tabletop.
Shown as Map 6.1.7. Then printers initialization finished.
Open image Rip file
Close the image file
Print the image as per the parameter
Set up printing parameter
Media edge position setup
Help
Zoom in or zoom out
Forward the media or backward the media
Emendation of the moving position and the printhead setup
details
Map 6.1.7
Main Image Control Interface of Printer Controlling
Programwww.wit-color.cn E-mail: [email protected]
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
15
ULTRA SERIES INKJET PRINTER USER MANUAL
6.1.2.2 Menu Structure of Controlling Program1. File Operation
Menu Click File on the menu bar, then enter file operation menu,
the displayed interface is shown as map 6.1.8Open printing file
Close printing file
Exit Ultra Control Center software
Map 6.1.8 2. Printing (Operation) Menu (map 6.1.9-1)File
info
Print option
Select area
Print image
Map 6.1.9-1
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
16
ULTRA SERIES INKJET PRINTER USER MANUAL
File Information Notice: Only when the image file is opened, can
you enter this menu order. Displayed information of opened image:
File path, File size, Image width & length and RIP resolution
etc. (map 6.1.9-2)
Image file Image dimensions Image size
Image resolution
File size File generate date
Map 6.1.9-2 Print Options (Print Options) Options of Printer
Resolution Modes, Printer speeds, printer density and Double
Printing, vertical space between segments and Edge overlap, Jet
Bars Switch, and settings of Purge Cycle based on the carriage
stopped at clean station point, etc. (map 6.1.9-3)
Jet bar setup
Print model
Purge setup Print density
Print speed
Encoder setup
Map 6.1.9-3
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
17
ULTRA SERIES INKJET PRINTER USER MANUAL
Printer Modes: Normal, Enhanced and Ultra. The option with black
dot is selected mode. Click and select one. Printer speeds: Slow,
Medium and Fast. The higher the speed is, the higher demands to
mechanical parts and electronic circuit and ink quality are. And
the printing quality will not be ideal. The option with black dot
is selected speed. Click and select one. Printer Density: It has
three options from 100% to 150%. Click and select as you need. Jet
Bars: Click Jet Bars On could start or stop Color bars printing.
The purpose of this function are checking working status of print
head by eyes and avoiding the paused print head jamming. Purge
Cycle: Click Purge Cycle could start or stop jetting periodically
at clean station point. The period could be decided by inputted
time (Unit=Secs.). This action could prevent print head jamming
when printer pauses. Please stop printing when print head is
jammed. Only after cleaning and carriage returned, can print be
continued. Due to mechanical reasons, the edge may be not smooth;
we can correct this error by inputting certain number into columns
of Pause L-adjust and Pause R-adjust. According to the width of
media, program could divide image into segments automatically.
Segments printing should take edge overlap and vertical space
between segments into account. Edge Overlap and Vertical Space
between Segments can be set in this interface by inputting the
proper size into side column. Unit is as prescribed currently.
Choose Encoder: 1. Inner encoder: this option is for servo
orientation. 2. Optical encoder: this option is for encoder strip
orientation (adopted by the printer which use encoder strip) 3.
Magnetic encoder: this option is for magnetic encoder strip
orientation (adopted by the printer which use magnetic encoder
strip. Until now it is unadopted.)
Automatic Cleaning:Each [ ] passes, you can input the number
that you want to set for automatic cleaning frequency; Movement
adjustment [ ], you can set the error that for automatic cleaning.
As per the position of sucking Nozzle, you can choose cleaning
station at left or right. Notice: Click OK button, exit from
interface and make modifications into effect. Click Cancel button,
exit from interface and invalidate the modifications, and resume
the original parameters.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
18
ULTRA SERIES INKJET PRINTER USER MANUAL
Select Area According to the width of media to set number of
segments or choose continual printing. Or print certain rectangle
area. Starting line for each segment could be set also. (map
6.1.9-4)
Image information
Segment printing or not
Setup printing start position (CM)
Setup printing position (Line number)
Map 6.1.9-4 Print Image Display all printing parameters; you may
check whether all settings are correct. When printing is started,
the printing schedule will be displayed. So that the procedure
could be paused to clean printheads. (map 6.1.9-5)
Printing image information
Print image
Map 6.1.9-5 Notice: Please confirm each parameters correctness
before printing.Shanghai Wit-color Digital Science &Technology
Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
19
ULTRA SERIES INKJET PRINTER USER MANUAL
3. View Menu Open or close the display of Toolbar
Open or close the display of windows bar
Statistic printing area
Turn on/off the black of CMYK image in the RGB display Turn
on/off the display of image of an image file, Default=On
x1/16 x1/8 x1/4 x1/2 Normal x2 x4 x8
Display image in size of 1/16 original. Display image in size of
1/8 original. Display image in size of 1/4 original. Display image
in size of 1/2 original. Display image in original size (Default).
Display image in size of two times original. Display image in size
of four times original. Display image in size of eight times
original.
4. Application Program MenuShanghai Wit-color Digital Science
&Technology Co., Ltd TEL: 0086-21-54881966 FAX:
0086-21-54889946 www.wit-color.cn E-mail: [email protected]
20
ULTRA SERIES INKJET PRINTER USER MANUAL
Blank skipping (Only for 720T software)
The same function with Printing Menu of Printing Option, refer
to Page 30.
Initialize the zero-point of print board, control medias taking
up and offTurn on/off printhead 35V.
Auto media measure (Only for 720T software) Options of Media
layout, margins and display of real printing width Calibration,
refer to P34-P35
Calibration :Shanghai Wit-color Digital Science &Technology
Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
21
ULTRA SERIES INKJET PRINTER USER MANUAL
Click Calibration order in the menu, then display control
interface. This window has two pages, one is Calibration-1, and the
other is Calibration-2. The default page is Calibration-1. Click
Calibration-1(map 6.1.9-6) or Calibaration-2, and then enter the
corresponding page.
Nonuse
Map 6.1.9-6
Calibration-1
On Calibration-1 page, click Set Clean Station Point button,
then set the print head cleaning station point. Numerical value
could be input in the side box, the unit is millimeter. This value
is the horizontal distance from Zero Point Switch to the left edge
of Carriage board. And the carriage board will stop at this point
when the next Home order is executed. Click Movement InitDist
button, then set the movement Initial distance. The numerical value
could be input in this column, unit is millimeter. The Movement
Initial Distance is the distance of carriage board movement from
the status of quiescence to constant speed or from constant speed
to quiescence status by accelerating or decelerating movement.
Printing should be in the area that carriage boards speed is
constant. Then the setting value should be larger than the actual
movement distance or equal to it. But this numerical value can not
be too large; otherwise the virtual printing width will be reduced.
Click Movement L-delay button, and set the distance of Movement
Left Delay. The numerical value could be input in the side column,
unit is millimeter. Movement L-delay is the carriage movement delay
from the movement orders sending to the carriage starting moving
right. The larger the value is; the larger the distance of printed
image movement to right will be. Click Movement R-delay button, and
set the distance of Movement Right Delay. The numerical value could
be input in the side column, unit is millimeter. Movement R-delay
is the carriage movement delay from the movement orders sending to
the carriage starting moving to left. The larger the value is; the
larger the distance of printed image movement to left will be. If
the mechanical precision in X axis is higher enough, then Movement
L-delay will be equal to Movement R-delay approximately. Then right
and left edge will be even by adjusting Movement L-delay and
Movement R-delay.Shanghai Wit-color Digital Science &Technology
Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
22
ULTRA SERIES INKJET PRINTER USER MANUAL
Notice: These adjustments are for inner encoder use Only! Click
Y-Stepping Adjust button, then adjust Y-Stepping slightly. The
numerical value could be input in the side column, unit is
millimeter. The error of media feeding may be caused by the
pressure of pintch rollers or the pull of media tak up system. Then
through inputting negative or positive numbers to adjust Y-axis
stepping. The number is determined by effect of eyeballing to real
printing. Click Bi-Alignment button, and then adjust Bi-Alignment
of X axis movement slightly. The numerical value could be input in
the side box, unit is millimeter. The numerical volume could be
plus or minus. Notice: This function is for Optical Encoder use
only. Notice: If media, print mode, print resolution or double
printing are different, then Y-Stepping Adjustment will be
different also. The corresponding settings should be saved
separately. Click Calibration-2 shown as map 6.1.9-7.This operation
could adjust the installation position of print head slightly.
Print color swatch
Adjust swatch width Test jets
Unchangeable
As per present printing mode, bidirectional printing vertical
lines to test bilateral calibration, size setup and carriage moving
status.
Map 6.1.9-7
To test the straightness of printheadsprinting horizontally and
vertically
5Help MenuShanghai Wit-color Digital Science &Technology
Co., Ltd TEL: 0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
23
ULTRA SERIES INKJET PRINTER USER MANUAL
Help
Display version and copyright information
6.2 WIT Series Software 6.2.1 Installation of WIT software
(Illustrate by Ultra720+H12, and the operation is applicable for
any model printer.) Installation of WIT software 1. Insert the disk
into CD driver; 2. Double click "My Computer" icon on tabletop,
open window; 3. Double click CD driver icon; 4. Double click SETUP
icon, then click NEXT icon; (Shown as Map 6.2.1--- 6.2.4)Shanghai
Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946 www.wit-color.cn E-mail:
[email protected]
24
ULTRA SERIES INKJET PRINTER USER MANUAL
Map 6.2.1
Map 6.2.2
Map 6.2.3 5. Install Dongle driver (Shown as Map
6.2.5&6.2.6)
Map 6.2.4
Map 6.2.5
Map 6.2.6
6. Install pixel board driver program: insert the pixel board
into PCI slot, then PC will find PCI equipment automatically,
driver programs location is under the path of C:\program
files\ultra*h\drivers. Installation of PHOTOPRINT software 1.Insert
the disk into CD driver; 2.The disk will run automatically; 3.
Finish installation, shown as Map 6.2.2-1---6.2.2-6.;
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
25
ULTRA SERIES INKJET PRINTER USER MANUAL
Input the number and password on dongle
Map 6.2.2-1
Map 6.2.2-2
Mark this Option
Map 6.2.2-3
Map 6.2.2-4
Double click this icon
Map 6.2.2-5
Map 6.2.2-6
4. After open the software, the hint requires to install the
printer driver will appear;
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
26
ULTRA SERIES INKJET PRINTER USER MANUAL
There are all kinds of printer drivers, you can choose the one
base on the real situation.
5.Install the printer driver( Map 6.2.2-7/8);
Map 6.2.2-7This equipment name is the printer name.
Map 6.2.2-8Must choose wit-color otherwise, it can not be
used.
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
27
ULTRA SERIES INKJET PRINTER USER MANUAL
6. Add ICC profile;
Map 6.2.2-9Choose import preset, find the ICC position, click
open.
Map 6.2.2-10Click YES, finish installation.
6.2.2 Usage of WIT Software6.2.2.1 General Introduction of WIT
Software Notice:Illustrate by WIT720TH12, and the
operation is applicable for any model printer;
The system timing can not be changed, otherwise the dongle will
be locked. 1. General Introduction WIT software includes Ultra
Control Center operation software and Photoprint Rip software. It
can accept any format image file with while RIP while printing
function. This function can save your time greatly. 2. Software
Reference Guide Double click the icon of Photoprint software on
desktop, start this control software image interface.(map
6.2.2-11)
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
28
ULTRA SERIES INKJET PRINTER USER MANUAL
Map 6.2.2-11
6.2.2.2 Control Program Menu structure Job Properties 1.Layo
ut
Media size setup
Image size setup
Copy image
Change direction of printing image Distance between printing
image Reset
2. Workflo w
Status after printing
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
29
ULTRA SERIES INKJET PRINTER USER MANUAL
3.Color Management
Choose Output image resolution Default
Choose ICC
4.Printer Option
This is ULTRA software control interface
Notice: Same usage with ULTRA software
Single click
Click send, then start printing
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
30
ULTRA SERIES INKJET PRINTER USER MANUAL
Chapter 7
Daily Maintenance
7.1 Print head Maintenance Installed Print heads Maintenance 1.
If printer stops printing for a short while, then turn on the Auto
Purge and press some inks on the surface of print heads to keep
them wet. 2. If printer stops using for a long period, then dip all
print heads into the tray with cleaning solution 4-5mm.(Without any
low lint paper or lint-free wiper in the tray) 3. If printer stops
printing for a long period, then disassemble all print heads from
printer, and clean them thoroughly by cleaning solution to prevent
them be clogged. 4. Before switching on the power, inspect all
print heads adapters and calbles are connected properly and keep
the ends of print heads and cables be dry. 5. Before turning on the
35V power supply, make sure inks filled in all print heads.
Uninstalled Print Heads Maintenance 1. Flush the inner of print
head by cleaning solution thoroughly, and keep the exterior of
print head clean. 2. Store print head in anticorrosive container,
and seal the container. 3. Before moving print head into the
container, cap the ink inlet of print head first. 4. Keep enough
cleaning solution in the container, then dip all print heads into
the cleaning solution 4-5mm.(Without any low lint paper or
lint-free wiper in the tray) New Print Heads Maintenance 1. Flush
the new print head thoroughly. 2. Before installing print head, dry
the end circuit part of print head by pneumatic gun, and make sure
wihout any liquid or conductor on it. 3. Keep well the red print
heads cover, the white ink inlet cap and the bag. Remarks: 1. To
prevent micro fuzz entering print head, keep low lint paper and
lint free wiper away from the print head tray. 2. To avoid dirty
objects coming into print head, cap the ink inlet of print head
during storing. 3. To prevent cleaning solution volatilizing, seal
the print heads container. 7.2 Printer Maintenance 1. Check the
linear rails lubricating status often and lubricate the linear rail
with certified lubricating oil per 8 hours after clean the rail. 2.
Lubricate the balls of slide block on linear rail regularly with
specific oil and special oiling gun appointed by Authorized linear
rail dealers. 3. Check ink quantity frequently and make sure the
ink is enough for printing. 4. Change the ink filter periodically.
5. Clean print heads, ink tanks and ink level sensor regularly. 6.
Check the tightness of joints of circuits and screws per 10 days
around. 7. Check the status of axis joint parts and make sure no
slippery, and then tighten all screws (as the status when it leaves
factory standard.)Shanghai Wit-color Digital Science
&Technology Co., Ltd TEL: 0086-21-54881966 FAX:
0086-21-54889946 www.wit-color.cn E-mail: [email protected]
31
ULTRA SERIES INKJET PRINTER USER MANUAL
8. Clean Computer, power supply and circuit boards regularly. 9.
It is better not to print under high speed during new printer
Running in period (before finish printing of 15000 ).
Attachment
Trouble Shooting Guide
8.1 Print Head Part 8.2 Ink Supply System 8.3 Heating System 8.4
Movement System 8.5 Media Feeding/Take up System 8.6 Computer
System 8.7 Delta Servo Controller alarm solve method(Details in the
attached form)
Shanghai Wit-color Digital Science &Technology Co., Ltd TEL:
0086-21-54881966 FAX: 0086-21-54889946
www.wit-color.cn E-mail: [email protected]
32