ULTRA-WINDER FILAMENT WINDER For more information about adding the Ultra-Winder Filament Winder to your operation, or any of your adhesive dispensing needs, visit Magnum Venus Products at www.mvpind.com. SYSTEM FEATURES The Ultra-Winder is the total solution for the manufacturing of fiberglass tanks and pipes. The Ultra-Wind System can do chop/hoop winding, apply roll goods and continuous winding strands in hoop or helical patterns, and can be customized to meet your production needs. SPECIFICATIONS Manufacturing Capabilities: Liner, Chop/Hoop, Helical Machine Configuration: Overhead or Floor Mount Winding Carriage Computer Control: User friendly HMI & simple program capabilities Maximum Mandrel Length: Up to 43 ft. (13 M) Maximum Mandrel Diameter: Up to 186 in. (4.7 M) Fiber Chopper: Four (4) strand Chopper assembly Pneumatic Roll Goods Applicator: Application of Mylar, Unidirectional, Woven Roving, etc. Pneumatic Controlled Roll-out Assembly: For removal of air entrapment in liner application Resin Bath: Sixty (60) strand drum style assembly Fiber Creel: Sixty (60) strand Creel with Sixty (60) strand backup Resin Mix/Dispense Pumping Unit: UltraMAX™ High Volume Material Monitoring: Resin, chop & winding fiberglass tracking system STANDARD OPTIONS Mandrel Drives: Cantilever and/or Head/Tailstock drive assembles Dual Drive Capabilities: 2nd Mandrel drive for greater production potential Mandrels: Collapsible & Non-Collapsible Mandrels Kent Manufacturing Center 1862 Ives Ave. Kent, WA 98032 253-854-2660 Knoxville Corporate Headquarters 2030 Falling Waters Rd., Suite 350 Knoxville, TN 37932 865-686-5670 Oldsmar Service Center 146 Dunbar Avenue, Unit A Oldsmar, FL 34677 727-573-2955 Canada 72 Beauvais Delson, Qc J5B 1W8 888.538.4330 Goshen Service Center 320 North Main St. Goshen, IN 46528 574-534-1434 Knoxville Service Center 642 Barbrow Lane Knoxville, TN 37932 865-321-8809 Recipe-based and manual controls for either chop/hoop or helical winding applications deliver versatility with consistent accuracy for increased quality on every part produced. Integration of chop/spray unit, rolled good application and dual side capability increase production while lowering material and labor costs. DESCRIPTION:
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ULTRA-WINDER FILAMENT WINDER
For more information about adding the Ultra-Winder Filament Winder to your operation,or any of your adhesive dispensing needs, visit Magnum Venus Products at www.mvpind.com.
SYSTEM FEATURESThe Ultra-Winder is the total solution for the manufacturing of fiberglass tanks and pipes. The Ultra-Wind System can do chop/hoop winding, apply roll goods and continuous winding strands in hoop or helical patterns, and can be customized to meet your production needs.
SPECIFICATIONSManufacturing Capabilities: Liner, Chop/Hoop, HelicalMachine Configuration: Overhead or Floor Mount Winding CarriageComputer Control: User friendly HMI & simple program capabilities Maximum Mandrel Length: Up to 43 ft. (13 M)Maximum Mandrel Diameter: Up to 186 in. (4.7 M)Fiber Chopper: Four (4) strand Chopper assemblyPneumatic Roll Goods Applicator: Application of Mylar, Unidirectional, Woven Roving, etc.Pneumatic Controlled Roll-out Assembly: For removal of air entrapment in liner applicationResin Bath: Sixty (60) strand drum style assemblyFiber Creel: Sixty (60) strand Creel with Sixty (60) strand backupResin Mix/Dispense Pumping Unit: UltraMAX™ High VolumeMaterial Monitoring: Resin, chop & winding fiberglass tracking system
STANDARD OPTIONSMandrel Drives: Cantilever and/or Head/Tailstock drive assemblesDual Drive Capabilities: 2nd Mandrel drive for greaterproduction potentialMandrels: Collapsible & Non-Collapsible Mandrels
KentManufacturing Center
1862 Ives Ave.Kent, WA 98032
253-854-2660
KnoxvilleCorporate Headquarters
2030 Falling Waters Rd., Suite 350 Knoxville, TN 37932
865-686-5670
OldsmarService Center
146 Dunbar Avenue, Unit AOldsmar, FL 34677
727-573-2955
Canada72 Beauvais
Delson, Qc J5B 1W8
888.538.4330
GoshenService Center320 North Main St.Goshen, IN 46528
574-534-1434
KnoxvilleService Center642 Barbrow LaneKnoxville, TN 37932
865-321-8809
Recipe-based and manual controls for either chop/hoop or helical winding applications deliver versatility with consistent accuracy for increased quality on every part produced. Integration of chop/spray unit, rolled good application and dual side capability increase production while lowering material and labor costs.
DESCRIPTION:
Related Documents
