Rev.1.2-12 Seiko Instruments Inc. 1 The S-8355/56/57/58 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage source, an oscillation circuit, an error amplifier, a phase compensation circuit, a PWM control circuit (S-8355/57) and a PWM/PFM switching control circuit (S-8356/58). With an external low-ON-resistance Nch Power MOS, this product is applicable to applications requiring high efficiency and high output current. The S-8355/57 Series realizes low ripple, high efficiency, and excellent transient characteristics with the PWM control circuit whose duty ratio can vary from 0 % to 83 % (from 0 % to 78 % for 250 kHz and 300 kHz models), the best-designed error amplifier and phase compensation circuits. The S-8356/58 Series switches its operation to the PFM control circuit whose duty ratio is 15 % with to the PWM/PFM switching control circuit under a light load and to prevent decline in the efficiency by IC operation current. ! Features • Low voltage operation: Start-up is guaranteed from 0.9 V(I OUT =1 mA ) • Low current consumption: During operation: 25.9 µA (3.3 V, 100 kHz, typ.) During shutdown: 0.5 µA (max.) • Duty ratio: Built-in PWM/PFM switching control circuit (S-8356/58) 15 to 83 % (100 kHz models), 15 to 78 % (250 kHz and 300 kHz models) • External parts: coil, diode, capacitor, and transistor • Output voltage: 0.1 V step setting is available between 1.5 and 6.5 V (for V DD /V OUT separate types) or 2.0 and 6.5 V (for other than V DD /V OUT separate types). Accuracy of ±2.4 %. • Oscillation frequency: 100, 250, and 300 kHz • Soft start function: 6 ms (100 kHz, typ.) • Shutdown function ! Packages • SOT-23-3 (Package code : MP003-A) • SOT-23-5 (Package code : MP005-A) • SOT-89-3 (Package code : UP003-A) • 6-Pin SNB(B) (Package code : BD006-A) ! Applications • Power supplies for portable equipment such as digital cameras, electronic notebooks, and PDAs • Power supplies for audio equipment such as portable CD/MD players • Constant voltage power supplies for cameras, video equipment, and communications equipment • Power supplies for microcomputers S-8355/56/57/58 Series ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATOR
43
Embed
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM …56,57,58_e.pdf · Rev.1.2-12 Seiko Instruments Inc. 1 The S-8355/56/57/58 Series is a CMOS step-up switching regulator which mainly consists
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Rev.1.2-12
Seiko Instruments Inc. 1
The S-8355/56/57/58 Series is a CMOS step-up switching regulatorwhich mainly consists of a reference voltage source, an oscillationcircuit, an error amplifier, a phase compensation circuit, a PWMcontrol circuit (S-8355/57) and a PWM/PFM switching control circuit(S-8356/58). With an external low-ON-resistance Nch Power MOS,this product is applicable to applications requiring high efficiency andhigh output current.The S-8355/57 Series realizes low ripple, high efficiency, andexcellent transient characteristics with the PWM control circuit whoseduty ratio can vary from 0 % to 83 % (from 0 % to 78 % for 250 kHzand 300 kHz models), the best-designed error amplifier and phasecompensation circuits.The S-8356/58 Series switches its operation to the PFM control circuitwhose duty ratio is 15 % with to the PWM/PFM switching controlcircuit under a light load and to prevent decline in the efficiency by ICoperation current.
! Features
• Low voltage operation: Start-up is guaranteed from 0.9 V(IOUT =1 mA )• Low current consumption: During operation: 25.9 µA (3.3 V, 100 kHz, typ.)
During shutdown: 0.5 µA (max.)• Duty ratio: Built-in PWM/PFM switching control circuit (S-8356/58)
15 to 83 % (100 kHz models), 15 to 78 % (250 kHz and 300 kHz models)• External parts: coil, diode, capacitor, and transistor• Output voltage: 0.1 V step setting is available between 1.5 and 6.5 V (for VDD/VOUT separate types) or
2.0 and 6.5 V (for other than VDD/VOUT separate types). Accuracy of ±2.4 %.• Oscillation frequency: 100, 250, and 300 kHz• Soft start function: 6 ms (100 kHz, typ.)• Shutdown function
• Power supplies for portable equipment such as digital cameras, electronic notebooks, and PDAs• Power supplies for audio equipment such as portable CD/MD players• Constant voltage power supplies for cameras, video equipment, and communications equipment• Power supplies for microcomputers
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
2 Seiko Instruments Inc.
! Block Diagram
! Selection Guide
1. Function List
Product name Controlsystem
Switchingfrequency
(kHz)
Shutdownfunction
VDD/VOUTseparate
typePackage Application
S-8355KxxMC PWM 100 Yes Yes SOT-23-5 Application which needs an variable output voltage and a shutdown function
S-8355LxxMC/BD 250 Yes Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage, a shutdown functionand a thin coil
S-8355MxxMC/BD 300 Yes Yes SOT-23-5 / 6 Pin-SNB(B) Application which needs an variable output voltage, a shutdown functionand a thin coil
S-8357BxxMC 100 Yes SOT-23-5 Application which needs a shutdown functionS-8357BxxMA 100 SOT-23-3 Application with an unnecessary shutdown functionS-8357BxxUA 100 SOT-89-3 Application with an unnecessary shutdown functionS-8357ExxMC 100 Yes SOT-23-5 Application which adjusts output voltage by external resistorS-8357FxxMC/BD 300 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs a shutdown function and a thin coilS-8357GxxMC/BD 300 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage and a thin coilS-8357HxxMC/BD 250 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs a shutdown function and a thin coil
S-8357JxxMC/BD 250 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage with an external resistorand a thin coil
S-8356KxxMC PWM/PFMswitching 100 Yes Yes SOT-23-5 Application which needs an variable output voltage and a shutdown function
S-8356LxxMC/BD 250 Yes Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage, a shutdown functionand a thin coil
S-8356MxxMC/BD 300 Yes Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage, a shutdown functionand a thin coil
S-8358BxxMC 100 Yes SOT-23-5 Application which needs a shutdown functionS-8358BxxMA 100 SOT-23-3 Application with an unnecessary shutdown functionS-8358BxxUA 100 SOT-89-3 Application with an unnecessary shutdown functionS-8358ExxMC 100 Yes SOT-23-5 Application which adjusts output voltage by external resistorS-8358FxxMC/BD 300 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs a shutdown function and a thin coilS-8358GxxMC/BD 300 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage and a thin coilS-8358HxxMC/BD 250 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs a shutdown function and a thin coil
S-8358JxxMC/BD 250 Yes SOT-23-5 / 6-Pin SNB(B) Application which needs an variable output voltage with an external resistorand a thin coil
Figure 1 Block Diagram
-+
IC internalpower supply
VOUT
EXT
VSS
PWM or PWM /PFM switching control circuit
Soft startbuilt-in referencepower supply
Phasecompensationcircuit
Oscillation Circuit
-+
EXT
VOUT
VSS
VDD
IC internalpowersupply
PWM or PWM /PFM switching control circuit
Phasecompensationcircuit
Soft startbuilt-in referencepower supply
Oscillation Circuit
-+
IC internalpower supply
VOUT
VSS
PWM or PWM /PFM switching control circuit
Soft startbuilt-in referencepower supply
EXT
Oscillation Circuit
ON/ OFF
Phasecompensationcircuit
-+
Soft startbuilt-in referencepower supply
IC internalpowersupply
VOUT
EXT
VSSPhasecompensationcircuit
VDD
Oscillation Circuit
ON/ OFF
PWM or PWM /PFM switching control circuit
(1) S-8357/58 Series B, H, F Type (No shutdown function) (2) S-8357/58 Series B, H, F Type (Shutdown function included)
(3) S-8357/58 Series E, J, G Type (VDD/VOUT separate type) (4) S-8355/56 Series K, L, M Type
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 3
2. Product Name
S-835 x x xx xx - xxx - Tx
IC direction in tape specificationT2 ; SOT-23-3, SOT-23-5, SOT-89-3TF ; 6-Pin SNB(B)
Product name (abbreviation)Package name (abbreviation)
MA ; SOT-23-3MC ; SOT-23-5UA ; SOT-89-3BD ; 6 Pin-SNB(B)
Output voltage (× 10) 18 to 50 (1.8 to 5.0 V)Product type
B ; Normal product, fOSC= 100 kHz (S-8357/58)H ; Normal product, fOSC = 250 kHz (S-8357/58)F ; Normal product, fOSC = 300 kHz (S-8357/58)E ; VDD/VOUT separate type, fOSC = 100 kHz (S-8357/58)J ; VDD/VOUT separate type, fOSC = 250 kHz (S-8357/58)G ; VDD/VOUT separate type, fOSC = 300 kHz (S-8357/58)K ; Shutdown function + VDD/VOUT separate type, fOSC = 100 kHz (S-8355/56)
L ; Shutdown function + VDD/VOUT separate type, fOSC = 250 kHz (S-8355/56)M ; Shutdown function + VDD/VOUT separate type, fOSC = 300 kHz (S-8355/56)
Control system5 or 7 ; PWM control6 or 8 ; PWM/PFM switching control
3. Package and Function List by Product Type
Series name Type Package name(abbreviation)
ShutdownfunctionYes / No
VDD/VOUTseparate type
Yes / No
S-8355 SeriesS-8356 Series
K, L, M(Shutdown function + VDD/VOUT separate type) K = 100 kHz, L = 250 kHz, M = 300 kHz
MCBD
Yes Yes
MAUA
NoB, H, F(Normal product) B = 100 kHz, H = 250 kHz, F = 300 kHz MC
BDYes
No
S-8357 SeriesE, J, G(VDD/VOUT separate type) E = 100 kHz, J = 250 kHz, G = 300 kHz
MCBD
No Yes
MAUA
NoB, H, F(Normal product) B = 100 kHz, H = 250 kHz, F = 300 kHz MC
2 VOUT Output voltage pin3 VDD IC power supply pin4 EXT External transistor connection pin5 (N.C.)6 VSS GND pin
SOT-23-5321
5 4Top view
SOT-23-3
32
1Top view
SOT-89-3321
Top view
6-Pin SNB(B)321
6 45
Top view
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
6 Seiko Instruments Inc.
! Absolute Maximum Ratings (Unless otherwise specified: Ta=25°C)
Parameter Symbol Ratings UnitVOUT pin voltage VOUT VSS−0.3 to VSS+12ON/OFF pin voltage*1 VON/OFF VSS−0.3 to VSS+12VDD pin voltage*2 VDD VSS−0.3 to VSS+12
B, H, F type VSS−0.3 to VOUT+0.3EXT pin voltage VEXT Others VSS−0.3 to VDD+0.3
Operating temperature Topr −40 to +85Storage temperature Tstg −40 to +125 °C
Note *1. With shutdown function *2. For VDD/VOUT separate types
Caution. Although the IC contains protection circuit against static electricity, excessive static electricity orvoltage which exceeds the limit of the protection circuit should not be applied to.
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Parameter Symbol Conditions Min. Typ. Max. Unit Testcircuit
Output voltage VOUT VOUT(S)×0.976 VOUT(S) VOUT(S)
×1.024Input voltage VIN − − 10 2Operation start voltage VST1 IOUT = 1 mA − − 0.9 VOscillation start voltage VST2 No external parts, voltage applied to VOUT − − 0.8 1Operation holdingvoltage VHLD
- Coil : CDRH6D28-470 of Sumida Corporation- Diode : RB461F(Schottky type) of Rohm Co., Ltd.- Capacitor : F93(16 V, 47 µF tantalum type) of Nichicon Corporation- Transistor : CPH3210 of Sanyo Electric Co., Ltd.- Base resister (Rb) : 1.0 kΩ- Base capacitor (Cb) : 2200 pF (ceramic type)
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 50 ΩThe shutdown function built-in type: ON/OFF pin is connected to VOUTVDD/VOUT separate type : VDD pin is connected to VOUT pin
Remark VOUT (S) specified above is the set output voltage value, and VOUT is the typical value of the output voltage.Caution VDD/VOUT separate type:
Step-up operation is performed from VDD= 0.8 V.However, 1.8≤VDD ≤10 V is recommended to stabilize the output voltage and oscillation frequency.(VDD ≥1.8 V must be applied for products with a set value of less than 1.9 V.)
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
Parameter Symbol Conditions Min. Typ. Max. Unit Testcircuit
Output voltage VOUT VOUT(S)×0.976 VOUT(S) VOUT(S)
×1.024Input voltage VIN − − 10 2Operation start voltage VST1 IOUT = 1 mA − − 0.9 VOscillation start voltage VST2 No external parts, voltage applied to VOUT − − 0.8 1Operation holdingvoltage VHLD
- Coil : CDRH6D28-220 of Sumida Corporation- Diode : RB461F(Schottky type) of Rohm Co., Ltd.- Capacitor : F93(16 V, 47 µF tantalum type) of Nichicon Corporation- Transistor CPH3210 of Sanyo Electric Co., Ltd.- Base resister (Rb) : 1.0 kΩ- Base capacitor (Cb) : 2200 pF (ceramic type)
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 50 ΩThe shutdown function built-in type : ON/OFF pin is connected to VOUTVDD/VOUT separate type : VDD pin is connected to VOUT pin
Remark VOUT (S) specified above is the set output voltage value, and VOUT is the typical value of the output voltage.Caution VDD/VOUT separate type:
Step-up operation is performed from VDD =0.8 V.However, 1.8≤ VDD ≤10 V is recommended to stabilize the output voltage and oscillation frequency.(VDD ≥1.8 V must be applied for products with a set value of less than 1.9 V.)
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 9
300kHz types (S-835xFxx, S-835xGxx, S-835xMxx)
(Unless otherwise specified: Ta = 25°C)
Parameter Symbol Conditions Min. Typ. Max. Unit Testcircuit
Output voltage VOUT VOUT(S)×0.976 VOUT(S) VOUT(S)
×1.024Input voltage VIN − − 10 2Operation start voltage VST1 IOUT = 1 mA − − 0.9 VOscillation start voltage VST2 No external parts, voltage applied to VOUT − − 0.8 1Operation holdingvoltage VHLD
- Coil : CDRH6D28-220 of Sumida Corporation- Diode : RB461F(Schottky type) of Rohm Co., Ltd.- Capacitor : F93(16 V, 47 µF tantalum type) of Nichicon Corporation- Transistor : CPH3210 of Sanyo Electric Co., Ltd.- Base resister (Rb) : 1.0 kΩ- Base capacitor (Cb) : 2200 pF (ceramic type)
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 50 ΩThe shutdown function built-in type: ON/OFF pin is connected to VOUTVDD/VOUT separate type : VDD pin is connected to VOUT pin
Remark VOUT (S) specified above is the set output voltage value, and VOUT is the typical value of the output voltage.Caution VDD/VOUT separate type:
Step-up operation is performed from VDD = 0.8 V. However, 1.8≤VDD ≤10 V is recommended to stabilize the output voltage and oscillation frequency. (VDD ≥1.8 V must be applied for products with a set value of less than 1.9 V.)
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
10 Seiko Instruments Inc.
! Test Circuits
! Operation
1. Step-up DC/DC Converter
The S-8355/57 Series is a DC/DC converter using a pulse width modulation method (PWM) and
features a low current consumption.
In conventional PFM DC/DC converters, pulses are skipped at low output load current, causing
fluctuation in ripple frequency of the output voltage, with the result of increase in ripple voltage.
In S-8355/57 Series, the switching frequency does not change, although the pulse width changes from
0 % to 83 % (78 % for F, G, H, J, L, and M type) corresponding to each load current. The ripple voltage
generated from switching can thus be removed easily through the filter because the switching frequency is
constant.
S-8356/58 Series is a DC/DC converter that atuomatically switches a pulse width modulation method
(PWM) and a pulse frequency modulation method (PFM), dependeing on the load current and features a
low current consumption. Especially, the series is a highly efficient DC/DC converter at an output current of
around 100 µA.
2.
0.1µF
V-
+
-
+
(VDD)
VSS
VOUT
(ON/OFF)
EXT
Rb
Cb
Figure 3 Test Circuits 1,2
1.
VSS
VOUT
(VDD)
EXT
(ON/OFF)Oscilloscope
0.1µF -
+
A
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 11
In conventional constant-duty PFM DC/DC converters, pulses are skipped at low output load current,
causing fluctuation in ripple frequency of the output voltage, with the result of increase in ripple voltage.
The S-8356/58 Series operates under the PWM control with the pulse width duty changing from 15 % to 83
% (78 % for F, G, H, J, L, and M Series) at high output load current.
On the other hand, the S-8356/58 Series operates under the PFM control with the pulse width duty fixed
at 15 % at low output load current, and pulses are skipped at low output load current according to the load
current and output to the switching transister. The oscillation circuit thus oscillates intermittently so that the
resultant lower self-consumption could prevent the efficiency from reducing at low load current. A
switching point from the PWM control to the PFM control depends on the external devices (coil, diode,
etc.), input voltage and output voltage.
For this IC, the built-in soft start circuit controls a rush current and overshoot of the output voltage when
powering on or the ON/OFF pin is turned to “H” level.
Shutdown pin: Stops or starts step-up operation.
(Only for SOT-23-5 package products of B, H, F, K, L and M type and for 6-pin SNB(B) package
products.)
Turning the shutdown pin to “L” level stops operation of all the internal circuits and reduces the
current consumption significantly.
DO NOT use the shutdown pin in floating state because it has a structure shown in Figure 4
and
is not pulled up or pulled down internally. DO NOT apply voltage of between 0.3 V and 0.75 V to
the shutdown pin because applying such voltage increases the current consumption. If the
shutdown pin is not used, connect it to VOUT (VDD for K, L and M type) pin.
The shutdown pin doesn’t have hysteresis.
Shutdownpin
CR oscillation circuit Output voltage
“H” Operation Fixed
“L” Stop ≅ VIN*
* Voltage obtained by extracting the voltage drop due
to DC resistance of the inductor and the diode
forward voltage from VIN.
Figure 4 Shutdown pin structure
VSS
VOUT (VDD for K, L and M types)
ON/OFF
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
12 Seiko Instruments Inc.
Figure 5 Step-up switching regulator circuit for basic equations
CLM1
D
VOUT
CONTVIN
L
+
-EXT
VSS
The following are basic equations [(1) through (7)] of the step-up switching regulator (see Figure 5.)Voltage at CONT pin at the moment M1 is turned ON (current IL flowing through L is zero), VA:
The change in IL over time:
Integration of the above equation :
IL flows while M1 is ON (tON). The time of tON is determined by the oscillation frequency of the OSC.
The peak current (IPK) after tON:
The energy stored in L is represented with 1/2 • L (IPK)2 .
When M1 is turned OFF (tOFF), the energy stored in L is transmitted through a diode to the output capacitor.
Then, reverse voltage (VL) is generated:
The voltage at CONT pin rises only by VOUT+VD.
The change in the current (IL) flowing through the diode into VOUT during tOFF:
Japan Ltd.Vdss*5 =20 Vmax, Vgss*6 =8 Vmax, Ciss*7 =310 pF,Id*8 =1.5 A (Vgs*9 =2.5 V)
MCH3405 Sanyo Electric Co., Ltd. Vdss*5 =20 Vmax, Vgss*6 =10 Vmax, Ciss*7 =280 pF,Id*8 =0.5 A (Vgs*9 =1.8 V)
*1. DC resistance, *2. Maximum allowable current, *3. Forward voltage, *4. Forward current, *5. Drain-source voltage,*6. Gate-source voltage, *7. Input capacitance, *8. Drain current, *9 Gate-source voltage
Caution. The values shown in the characteristics column of Table 2 above are based on the materials provided by eachmanufacturer, however, consider the characteristics of the original materials when using the above products.
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 33
2. Reference Data 1
The data of (a) Output current vs. efficiency characteristics and (b) Output current vs. output voltage
characteristics under conditions of (1) to (12) shown in Table 1 are shown below.
(1) S-8357F33
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
20
40
60
80
100
VIN=0.9 V VIN=1.8 V VIN=2.7 V
0.1 1 10 100 1000Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]O
utpu
t Vol
tage
VO
UT
[V]
(2) S-8357F50
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
20
40
60
80
100
1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
0.1Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
(3) S-8356M50
20
40
60
80
100
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
34 Seiko Instruments Inc.
(4) S-8357B33
20
40
60
80
100
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
(5) S-8358B33
20
40
60
80
100
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
(6) S-8357B50
20
40
60
80
100
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 35
(7) S-8356M50
20
40
60
80
100
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
](8) S-8357B33
0
20
40
60
80
100
0.1 1 10 100 1000
VIN=0.9V VIN=1.8V VIN=2.7V
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
(9) S-8358B33
20
40
60
80
100
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
36 Seiko Instruments Inc.
(10) S-8357B50
20
40
60
80
100
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
(b) Output Current vs.Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
](11) S-8357F33
3.0
3.1
3.2
3.3
3.4
3.5
0.1 1 10 100 1000
IN=0.9V IN=1.8V IN=2.7V
20
40
60
80
100
0.1 1 10 100 1000
IN=0.9V IN=1.8V IN=2.7V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
(12) S-8356M50
20
40
60
80
100
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
4.7
4.8
4.9
5.0
5.1
5.2
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
(b) Output Current vs. Output Voltage
Effic
ienc
y η
[%]
(a) Output Current vs. Efficiency
Output Current IOUT [mA]
Out
put V
olta
ge V
OU
T [V
]
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORRev. 1.2-12 S-8355/56/57/58 Series
Seiko Instruments Inc. 37
3. Reference Data 2
The actual output current vs. ripple voltage characteristics data under conditions of (1) to (12) in Table 1
are shown below.
(1) S-8357F33 (2) S-8357F50
0
50
100
150
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
0
50
100
150
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
Output Current vs. Ripple Voltage
Rip
ple
Volta
ge V
r [m
V]
Output Current vs. Ripple Voltage
Output Current IOUT [mA]R
ippl
e Vo
ltage
Vr [
mV]
(3) S-8356M50 (4) S-8357B33
0
50
100
150
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
0
50
100
150
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
Output Current IOUT [mA]
Output Current vs. Ripple Voltage
Rip
ple
Volta
ge V
r [m
V]
Output Current vs. Ripple Voltage
Output Current IOUT [mA]
Rip
ple
Volta
ge V
r [m
V]
(5) S-8358B33 (6) S-8357B50
0
50
100
150
0.1 1 10 100 1000
VIN=0.9 V VIN=1.8 V VIN=2.7 V
0
50
100
150
0.1 1 10 100 1000
VIN=2 V VIN=3 V VIN=4 V
Output Current IOUT [mA]
Output Current vs. Ripple Voltage
Rip
ple
Volta
ge V
r [m
V]
Output Current vs. Ripple Voltage
Outz put Current IOUT [mA]
Rip
ple
Volta
ge V
r [m
V]
ULTRA-SMALL PACKAGE PWM CONTROL, PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATORS-8355/56/57/58 Series Rev. 1.2-12
• The information described herein is subject to change without notice.• Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein
whose related industrial properties, patents, or other rights belong to third parties. The application circuitexamples explain typical applications of the products, and do not guarantee the success of any specificmass-production design.
• When the products described herein are regulated products subject to the Wassenaar Arrangement or otheragreements, they may not be exported without authorization from the appropriate governmental authority.
• Use of the information described herein for other purposes and/or reproduction or copying without theexpress permission of Seiko Instruments Inc. is strictly prohibited.
• The products described herein cannot be used as part of any device or equipment affecting the humanbody, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatusinstalled in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc.
• Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, thefailure or malfunction of semiconductor products may occur. The user of these products should thereforegive thorough consideration to safety design, including redundancy, fire-prevention measures, andmalfunction prevention, to prevent any accidents, fires, or community damage that may ensue.