Ultra 4K Tool Box UHD Tools for new TV standards The Omnitek Ultra 4K Tool Box provides a unique and unparalleled suite of tools for the analysis, conversion and generation of Ultra HDTV and Digital Cinema video signals in current formats up to 4096x2160/60, helping manufacturers to design products and enabling broadcast engineers, networks, telcos, outside broadcast units, systems integrators and researchers to build, test and commission UHD and 4K systems with complete confidence. Containing a complete solution, the Ultra 4K Tool Box offers a variety of connection formats - multi-rate SDI, HDMI and DisplayPort 4K - for both video source and display. Conversion between cable and image formats allows operation in multi-format video environments, while comprehensive and advanced SDI physical layer analysis features enable system designers to rapidly locate sources of signal error in all paths up to 12G-SDI single link 4K/60Hz.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Ultra 4K Tool Box
UHD Tools for new TV standards The Omnitek Ultra 4K Tool Box provides a unique and unparalleled suite of tools for the analysis, conversion and generation of Ultra HDTV and Digital Cinema video signals in current formats up to 4096x2160/60, helping manufacturers to design products and enabling broadcast engineers, networks, telcos, outside broadcast units, systems integrators and researchers to build, test and commission UHD and 4K systems with complete confidence.
Containing a complete solution, the Ultra 4K Tool Box offers a variety of connection formats - multi-rate SDI, HDMI and DisplayPort 4K - for both video source and display. Conversion between cable and image formats allows operation in multi-format video environments, while comprehensive and advanced SDI physical layer analysis features enable system designers to rapidly locate sources of signal error in all paths up to 12G-SDI single link 4K/60Hz.
SDI Analysis The ANALYSE option provides a comprehensive range of instruments required to analyse the video, metadata and audio of the SDI data stream.
User-configurable display with presets
Picture - high quality, full-size, full-frame-rate, active video and full-raster modes
SD, HD, 3G, 6G and 12G-SDI
Zoom View
Gamut Meters
Status – Monitoring video and physical layer
Data and Cable Views
Data Waveform
Audio Meters and Status
Ancillary Data
Format Converter The CONVERT option allow the up/down/cross conversion between input and output standards.
SD, HD, 3G, 6G and 12G-SDI support
Conversion between appropriate video formats
Conversion between different link structures
Conversion between SQ and 2SI
Simple and intuitive Connections menu
User defined image sharpening/softening
Bit depth and colour space conversion
User Interface The User Interface can be displayed via a web browser on the HDMI HD or DisplayPort HD output.
SNMP Control & Automation
SNMP commands are supported and SNMP traps generated, allowing automation of all aspects of the 4K Tool Box's functionality, and enabling remote control scripting as part of a test infrastructure.
Pattern Generation The GENERATE option allows the generation of stills and sequences in all video standards up to 4K p60 for SDI, HDMI and DisplayPort outputs with Audio Tone.
Pattern and sequence generation from SD to 4K – active video and full-raster (RVF).
Multi-link pattern generation for QL-3G & DL-6G
Colour bars including SMPTE Bars
Multiburst, frequency sweeps, moving Zone Plates
Luma / chroma steps & ramp and pulse & bar
User-defined patterns
Omnitek TSA and user-defined sequences.
4K TSA including quadrant and cable identifiers for cable ordering of multi-link 4K standards.
6G & 12G-SDI Pathological ‘pothole’ test signal
Play back of captured stills and video clips – active video and full-raster.
Patterns loaded from internal SSD, USB or LAN
Independent luma and chroma channel control
Output level & slew-rate control (PHY_ADV)
SDI link timing delay for QL 3G and DL 6G-SDI
Generator lockable to video, ext ref or free run.
Jitter insertion to RP184 into all SDI rates at 0 to 3MHz and up to 4UI pk-pk (PHY_ADV option)
16 simultaneous generated audio tones
12G-SDI Support The VIDEO_12G option provides input, output and instrument support for 12G-SDI signals up to 4K p60.
Physical Layer Analysis The PHY option provides a pair of instruments required to measure signal quality and jitter on SDI interfaces:
Eye Waveform Display up to 6Gb/s
Jitter Meters up to 6Gb/s
Advanced Physical Layer Analysis This PHY_ADV option provides the following:
Eye Pattern up to 12Gb/s
Jitter Measurement up to 12Gb/s
Jitter Waveform up to 12Gb/s
Jitter Histogram up to 12Gb/s
Jitter Spectrum up to 12Gb/s
SDI Analysis Toolset (ANALYSE) Picture Viewer
High quality Variable size SDI up to 4K HDMI to 1920x1080 Native resolution display Point of interest selection
Zoom View
31x31 or 15x15 array Hex or Decimal display User cursor position Point of interest display
Gamut Meters
Intuitive display 6-bar YCbCr & RGB check Real time % display Cursor selection EBU RP 103 compliant
Status Monitor
Video format & image size Physical layer checking Link timecode display Gamut range Signal amplitude & Jitter
Data View
Hex, Hex 8/2 or Decimal SMPTE colour coding Virtual image identification User cursor position Point of interest selection SAV and EAV shortcuts
Cable View
Hex, Hex 8/2 or Decimal SMPTE colour coding User cursor position Point of interest selection SAV and EAV shortcuts
Data Waveform
31 or 15 pixel YUV waveform Hex, Hex 8/2 or Decimal User cursor position Point of interest selection
Ancillary Data
Ancillary status overview 53 common ANC packets 3 user-defined packets Colour-coded status Packet error count Detailed status pages
Timing
Single, dual or quad link Timing against link or ref Graphical display Numerical timing values
Audio Status
Audio format details 4 Audio group display Audio stream selection
Audio PPM
16 audio channels -60dB to 0dB range
Eye Waveform (PHY / PHY_ADV)
SD, HD, 3G, 6G & 12G Automatic measurements Rise and fall time cursors Selectable jitter meter Waveform histograms Single or multiple Eyes
Systems 4K Tool Box with Analyser, Generator, Converter, PHY to 6G.
Also as separate Analyser, Generator or Converter to 6G
DisplayPort input * Reserved for future use SFP + Cage * Reserved for future use CVBS * Future implementation
Omnitek reserves the right to change specifications without notice. Please refer to the Omnitek web site for the latest specifications.
About Omnitek
Omnitek is the product division of Image Processing Techniques Ltd., a leading independent consultancy company specializing in the design of products for the broadcast, post-production, and digital film industries. Since 1998, IPT has completed many successful design projects for major equipment manufacturers in Europe, Asia, and the United States. For more information, please visit www.omnitek.tv