FL Surface Mount Design UL924 PHOTOLUMINESCENT EXIT SIGN U L C SIDE VIEW FRONT VIEW DIRECTIONAL INDICATOR 7 17/20" (200 mm) 2.5" (65 mm) Install directly adjacent to the Exit Sign, same arrow can be used for both directions. Attached by screws. 1/50" (0.5 mm) * Directional Indicators are ordered separately for FL model. Universal design allows them to be used for either LEFT, RIGHT, or BOTH DIRECTIONS. ORDERING INFORMATION 1. EXIT SIGN 2. DIRECTIONAL INDICATOR FL - FLUSH FAMILY RD - RED GN - GREEN FL PRODUCT CODE SECOND COLOR * First Color = Luminous FL - FLUSH C02AR - for UC02A3120 FAMILY RD - RED GN - GREEN EXAMPLE : FL PRODUCT CODE SECOND COLOR CO2AR FL RD * First Color = Luminous UC02A3120 - Luminous Face UC02A3120 FL RD UC02A3120 FL GN UL Listed (standard) meets and exceeds the observation visibility criteria required for UL-924 "Emergency Lighting and Power Equipment" meets NFPA Life Safety Code 101 requirements. ULC Listed to ULC/ORD-924-02 for Canada LISTING WARRANTY 5 foot-candles of fluorescent illumination must be present on the sign face at all times during building occupancy. With exposure to this light source for 60 minutes the sign will be legible in total darkness to observers standing 75 feet away from the sign, for least 90 minutes after all light has been extinguished CHARGING LIGHT SOURCE LEGIBLE VIEWING DISTANCE: 75 feet 5 years Manufacturer's Limited Warranty against material defect and workmanship. PRODUCT CARE : Periodically clean the sign facing with a damp cloth, and conduct periodic inspections to ensure the sign is clear and visible. INTENDED USE CONSTRUCTION Made of High-Quality Aluminum sheeting. The All-Aluminum box housing is impact-resistant, water-proof, corrosion-proof, and flame-retardant. The High-Brightness photoluminescent material is applied directly onto the aluminum box without the use of resin or plastic. It is non-radioactive, non-toxic, flame-retardant, high temperature resistant. Proprietary technology provides uniform illumination across the sign. INSTALLATION Universal (Top and End/Edge) bracket mounting, Housing secures to the mounting bracket with 4 screws. Surface mounting with 4 screws. Install photoluminescent EXIT signs only in locations, where an external illumination source is present, is deemed reliable and is supplied by a circuit not controlled by automatic timers or sensors and whose controls are accessible only to authorized personnel. This reliable external illumination source is to be energized at all times during building occupancy. Ideal for building code and supplementary applications, including those requiring attractive, quick installation exit signs. Perfect in areas where electrical wiring is difficult, unavailable or not suitable. NO WIRING, NO ELECTRICITY, and NON-RADIOACTIVE. OPERATIONAL LIFE EXPECTANCY: 20 YEARS + Product longevity depends on maintaining the original integrity of the product. 12.2" 7 17/20" 1/50" U01A3120 (200 mm) (0.5 mm) (310 mm) 7 17/20" (200 mm) DIMENSIONS EXAMPLE : UC01A3120 FL RD UC02A3120 FL RD UC01A3120 FL RD Toll Free: 1-800-504-3822 Tel: (514) 369-2444 Fax: (514) 313-5563 [email protected] WWW..EVACMAP.COM USA: 555 West Fifth Street, 31st Floor, Los Angeles, CA 90013 Canada:16 Westminster Ave. N., Suite 201, Montreal, QC H4X 1Z1 Catalog Number: UC01A3120-FL (RED) Catalog Number: UC02A3120-FL (RED / GREEN)