UEE40411 CERTIFICATE IV IN ELECTRICAL INSTRUMENTATION 10/10/18 | RTO code 2394 REGISTRATION FORM CERTIFICATE IV IN ELECTRICAL INSTRUMENTATION Surname First Name Unique Student Identifier (USI) refer www.usi.gov.au Date of Birth Address Suburb Postcode Telephone Facsimile Mobile Email Company Name Company ABN Company Address Suburb Postcode Company Telephone Company Email How did you find out about CET? Would you like to receive special offers and newsletters from CET? Yes No This course is only available at Joondalup Campus Course Date Do you have any of the following? Certificate III in Electrotechnology or equivalent EW Licence Number Other (please specify) Course Fees Please find enclosed: Cheque Company Purchase Order Credit Card Money Order Other (please specify) SKILLS AND NATIONAL RECOGNITION The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply. CET accepts and provides credit to learners for units of competency and/ or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by either AQF certification documentation issued by any other RTO or AQF authorised issuing organisation or an authenticated VET transcript issued by the Registrar. If you believe you are entitled to Skills Recognition, we encourage you to complete an application form available from our administration team. Credit Card details VISA Mastercard Card number Card expiry date Security code (3 digits on back of card) Name on card Order payable to CET for: *NECA Membership Number ____________________________ #Please complete the CET Direct Debit Form (Fees are subject to change and must be paid in full prior to commencement.) Paid by (if other than student, please provide name and address) Payment frequency Non- subsidised Subsidised NECA member* Payment type 1 x payment $5000 n/a $4800 All types 2 x payments $2500 n/a $2400 Direct debit # 5 x payments $1000 n/a $960 Direct debit # 50% upfront + 5 x additional payments $2500 upfront + $500 x 5 n/a $2400 upfront + $480 x 5 Direct debit #
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
UEE40411 CERTIFICATE IV IN ELECTRICAL INSTRUMENTATION
10/10/18 | RTO code 2394
REGISTRATION FORM CERTIFICATE IV IN ELECTRICAL INSTRUMENTATION
Surname
First Name
Unique Student Identifier (USI) refer www.usi.gov.au
Date of Birth
Address
Suburb Postcode
Telephone Facsimile
Mobile
Company Name Company ABN
Company Address
Suburb Postcode
Company Telephone Company Email
How did you find out about CET?
Would you like to receive special offers and newsletters from CET? Yes No
This course is only available at Joondalup Campus
Course Date
Do you have any of the following? Certificate III in Electrotechnology or equivalent EW Licence Number Other (please specify)
Course Fees Please find enclosed: Cheque Company Purchase Order Credit Card Money Order
Other (please specify)
SKILLS AND NATIONAL RECOGNITION The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply.
CET accepts and provides credit to learners for units of competency and/or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by either AQF certification documentation issued by any other RTO or AQF authorised issuing organisation or an authenticated VET transcript issued by the Registrar.
If you believe you are entitled to Skills Recognition, we encourage you to complete an application form available from our administration team.
Credit Card details VISA Mastercard
Card number
Card expiry date
Security code (3 digits on back of card)
Name on card Order payable to CET for:
*NECA Membership Number ____________________________ #Please complete the CET Direct Debit Form
(Fees are subject to change and must be paid in full prior to
commencement.) Paid by (if other than student, please provide name and address)
Payment frequency
Non-subsidised
Subsidised NECA member*
Payment type
1 x payment $5000 n/a $4800 All types
2 x payments $2500 n/a $2400 Direct debit#
5 x payments $1000 n/a $960 Direct debit#
50% upfront + 5 x additional payments
$2500 upfront + $500 x 5
n/a $2400 upfront + $480 x 5
Direct debit#
This nationally endorsed qualification provides licenced electricians and final year apprentice electrical mechanics with the training, skills and knowledge required for the functional operation, calibration and fault finding of basic industrial instrumentation and electrical equipment.
It also provides skill sets in working with pressure, level, temperature, and flow and their application to analytical instruments for process and control.
COURSE CONTENT
CORE UNITS OF COMPETENCYUEENEEK145A Implement and Monitor Energy Sector Environmental
and Sustainable Energy Policies and Procedures
UEENEEE038B Participate in Development and Follow a Personal Competency Development Plan
UEENEEE117A Implement and Monitor Energy Sector OHS Policies and Procedures
UEENEEE124A Compile and Produce an Energy Sector Detailed Report
UEENEEI101A Use Instrumentation Drawings, Specification, Standards and Equipment Manuals
UEENEEI102A Solve Problems in Pressure Measurement Components and Systems
UEENEEI103A Solve Problems in Density/Level Measurement Components and Systems
UEENEEI104A Solve Problems in Flow Measurement Components and Systems
UEENEEI105A Solve Problems in Temperature Measurement Components and Systems
ELECTIVE UNITS OF COMPETENCYUEENEEI150A Develop, Enter and Verify Discrete Control Programs
for Programmable Controllers
UEENEEI151A Develop, Enter and Verify Programs for Industrial Control Systems Using High Level Instructions
COURSE DURATION
The course utilises a blended mode of delivery, incorporating online learning activities and face-to-face practical workshops and knowledge based assessments. Participants are expected to
complete the online learning activities within 12 months, following which they will be invited to undertake the practical requirements and knowledge based assessments.
Participants will typically complete the face-to-face practical requirements and knowledge based assessments of the instrumentation specialisation core units full-time over a period of 14 days - broken up into 4 different instances of attendance.
COURSE REQUIREMENTSApplicants must hold a current WA Unrestricted Electrician’s Licence or equivalent issued in an Australian State or Territory. All core units of competency must be achieved and a combination of elective units of competency to a total weighting of 120 points.
Fully enclosed shoes must be worn at all times in CET buildings.
Safety boots/shoes must be worn when working in the workshop.
Prior to course commencement, the student is required to review CET’s Code of Conduct which is available at www.cet.asn.au.
COURSE MATERIALSThe required textbooks for this course are included in the course cost, and will be provided to each participant at the start of the course:
• Lessons in Industrial Instrumentation, Tony R Kuphaldt – also available online for free
• Programmable Logic Controllers, 4th Edition, Frank Petruzella
PPE - Safety boots.
CERTIFICATIONGraduates will be issued with a UEE40411 Certificate IV in Electrical-Instrumentation. A Statement of Attainment will be issued for each Unit of Competency completed.
NOTE: Where a final year apprentice electrical mechanic is not in possession of a current WA Unrestricted Electrician’s Licence, this qualification will be issued once all pre-requisite units have been completed.
HOW TO ENROLTo enrol, complete and return the form over the page with full payment to the relevant campus.
Your booking is not guaranteed until payment and registration has been received. Under no circumstances will registration without payment entitle you to a place on the course.
COURSE OVERVIEW
WWW.CET.ASN.AU
CET CANCELLATION POLICY All cancellations must be received in writing via mail or email
8 days+ prior to course commencement
100% fee refund
2-7 days prior to course commencement
90% fee refund
1 day or less prior to course commencement
No refund
CET TRANSFER POLICY Should a candidate wish to transfer their scheduled course date
Initial transfer request made 8 days or more prior to course commencement
No fee applies
1 to 7 days prior to course commencement
10% of full fee charge
Any subsequent requests for course transfers
10% of full fee charge
CONTACT DETAILS
JOONDALUP CAMPUS Phone (08) 9233 5000Email [email protected] 20 Injune Way, Joondalup WA 6027Post PO Box 4, Joondalup DC WA 6919
JANDAKOT CAMPUS Phone (08) 6595 6600 Email [email protected] 5 Avior Avenue, Jandakot WA 6164 Post PO Box 3857, Success WA 6964
WWW.CET.ASN.AU
The College of Electrical Training (CET) is the major private training provider for the Western Australian electrical and telecommunications industries.
Excellence in customer service is our priority; we offer modern ‘state of the art’ facilities and quality training by industry for industry.
Related Documents
