IBH I
IBH
I
I
Typical Luminaire PerformanceConfiguration Delivered Lumens† Power Consumption Drive Current Rated Life of LED Module (L70B50 @Tq 35˚C)*
.LM09X8 9611 79W 370mA 100,000+ hrs
.LM15X8 15394 150W 675mA 100,000+ hrs
.LM18X8 19223 158W 370mA 100,000+ hrs
.LM24X8 24625 214W 500mA 100,000+ hrs
.LM30X8 30788 296W 675mA 100,000+ hrs
.LM33X8 33864 355W 455mA 100,000+ hrs
Note: Data is correct at time of print.
* For other life metric data in line with IEC PAS62722-2-1 and 62717 contact your Holophane Representative for details.
† Based on the average of all the optical distribution options.
IBH has been developed as the ideal one-for-one replacement of conventional lighting systems within light industrial, commercial, retail, warehousing and other large indoor spaces.
optics / light source
> Available with narrow and wide distributions to meet both horizontal and vertical light requirements
> 80 CRI
> 4000°K & 5000°K colour temperature
> Six lumen packages available (9000, 15000, 18000, 24000,
30000 & 33000)
approvals
Complies with EN60598
IP IP20 luminaire
IK IK07
Ta up to 50°C*
*Excludes emergency versions
For further information please visit
the Holophane website
www.holophane.co.uk
The new IBH LED luminaire delivers a reliable, cost-effective lighting solution to a demanding market. We have leveraged years of experience to develop innovative lighting technologies that meet growing consumer demands for efficiency, reliability and positive environmental impact. IBH delivers peak performance, exceptional aesthetics, simple installation and easy maintenance.
The energy-efficient IBH LED luminaire was specifically designed to give you an affordable LED solution that is a one-for-one replacement of fluorescent and HID systems. The IBH LED is not just affordable it is a high-performance, quality, configurable LED luminaire that is ideal for a wide range of applications.
specification
The luminaire shall consist of an extruded aluminium (6063 T6) body, housing the gear, with two bespoke aluminium end caps to ensure a rigid linear design. The optical arrangement consists of mid-power LEDs mounted to the PCB which are then directly attached to the aluminium body to aid heat dissipation by way of conduction. Internal, precision formed, reflectors optimize the distribution behind the clear lens (diffuse lens available as option) which provides glare control and LED protection. Rigidity of the optical assembly is maintained by the fabricated steel end plates. Luminaire is supplied with 1.2m flying lead.
features and benefits
Thermal Management
> Luminaire construction has been designed to move heat away from the LEDs and driver(s) to maximise luminaire life.
Exceptional Optical Performance
> Bespoke reflectors that deliver two distributions (narrow and wide) to meet both horizontal and vertical light requirements.
> Available with 6 lumen packages that are designed for a number of applications.
Complete Lighting Package
> Can be integrated with DALI controls system.
> Option for a 1 & 3 hour integrated LED emergency.
> Attached PIR suitable for 360°, aisle and end of aisle, from 3 to 15 metres mounting heights.
Versatile Lighting System
> Available in 2 sizes, depending on lumen package, that can be suspended, surface mounted or attached directly to trunking.
> Trunking available with T-joints, cross joint or corner joint allowing full on site flexibility.
weight (with control gear)
IBH (LM09X8 & LM015X8 versions) 5kg
IBH (LM24X8, LM30X8 & LM36X8 versions) 10kg
TA
-20°C to 50°C*
*excludes emergency versions.
light distribution
Narrow Wide
applications
Retail Environments
Warehousing
Convention Centres
Light Industrial
Commercial Environments
Note: The specifications of the luminaire represents typical values. All descriptions, illustrations, drawings and specifications in the catalogue and Holophane websites represent only general particulars of the goods to which they apply and shall not form part of any contract. The company reserves the right to change specifications at its discretion without prior notification or public announcement.
Trunking mount
Wire guard option
Semi-diffuse acrylic lens (optional)Clear lens as standard
narrow widenarrow wide
Suspension mount version
PIRA option
Surface mount
1.2m flying lead
1153
383
114
595
382 740
382
113
1298
383
114
114mm
1153
383
114
595
382 740
382
113
1298
383
114
64
81 63
64mm
63
mm
81
mm
Trunking
LM0948 & LM1548 versions
LM1848, LM2448, LM3048 & LM3648 versions
383mm 595mm
740mm
1153mm
1298mm
150mm
150mm
102
323 357
71
357mm
71
mm
10
2m
m
Self Contained Emergency Option
102
323 357
71
102
323 357
71
ordering details - luminaire
Example
Code Luminaire (required)
IBH IBH Luminaire
Code Lamp Type (required)
.LM0948 LED light engine producing c.9,000 lumens with a nominal 4000˚K colour temperature 80CRI
.LM1548 LED light engine producing c.15,000 lumens with a nominal 4000°K colour temperature 80CRI
.LM1848 LED light engine producing c 18,000 lumens with a nominal 4000˚K colour temperature 80CRI
.LM2448 LED light engine producing c.24,000 lumens with a nominal 4000°K colour temperature 80CRI
.LM3048 LED light engine producing c 30,000 lumens with a nominal 4000˚K colour temperature 80CRI
.LM3348 LED light engine producing c.33,000 lumens with a nominal 4000°K colour temperature 80CRI
.LM0958 LED light engine producing c 9,000 lumens with a nominal 5000˚K colour temperature 80CRI
.LM1558 LED light engine producing c 15,000 lumens with a nominal 5000˚K colour temperature 80CRI
.LM1858 LED light engine producing c 18,000 lumens with a nominal 5000˚K colour temperature 80CRI
.LM2458 LED light engine producing c 24,000 lumens with a nominal 5000˚K colour temperature 80CRI
.LM3058 LED light engine producing c 30,000 lumens with a nominal 5000˚K colour temperature 80CRI
.LM3358 LED light engine producing c.33,000 lumens with a nominal 5000°K colour temperature 80CRI
Code Distribution (required)
.ND Narrow distribution
.WD Wide distribution
Code Diffuser (option)
.SDR Semi diffuse acrylic reflector
Code Fixing method (required)
.SM Surface mounted bracket
.SUS Suspension (kit supplied)
.TK Trunking mount for HEL trunking system
.TK1 Universal surface mount/trunk blank bracket
.TK2 Universal trunk adaptor mounting plate (suitable for M20 trunk adaptor)
Code Photocell (option)
.PIRA* PIR (attached) for 360º, aisle and end of aisle. From 3 to 15 metres mounting
Code Colour (required)
.C1 Smooth White (RAL9016)
Code Dimming Outputs (option) .LRD DALI HF electronic control gear
.CL7 Programmed to deliver 70% of the initial lumen over the life of the product
.CL8 Programmed to deliver 80% of the initial lumen over the life of the product
.CL9 Programmed to deliver 90% of the initial lumen over the life of the product
Code Emergency (option) .EM1 1 hour LED emergency
.EM3 3 hour LED emergency
.VDC Luminaire supplied with internal DC fuse to accept 170-275V DC
Luminaire will dim to 15% when powered by DC
Code Guard (option) .WG Wire guard
Code Auxiliary Circuits (option) .FC1 Electrical connection to existing
trunking loom via KLIK 4 plug
.FC2 Electrical connection to existing
trunking loom via WAGO 5 POLE plug
.FC3 Electrical connection to existing trunking
loom via GST18/6 BLACK/BLUE plug
.FC4 Electrical connection to existing trunking
loom via GST18/5 plug
.FC5 Electrical connection to existing trunking
loom via ENSTO 6 D2 plug
IBH .LM0948 .ND .SDR .SM .PIRA .C1 .LRD .EM1 .WG .FC1
To find out more please visit www.holophane.co.uk
*Daylight and presence detector. As default the option is set to switch luminaire on when daylight is <500lux at sensor level and dims to ‘off’ when no occupancy after 20 minutes. Default settings can be adjusted on site using accessory codes HEL.PRO or HEL.PRO.25. Mounting range of sensor is 3m to 15m.
ordering details - accessories and trunking
To find out more please visit www.holophane.co.uk
Code Accessories HEL.PIRA PIR for 360º, aisle and end of aisle. From 3 to 15 metres mounting (IP65),
ready to mount on Holophane trunking and suitable for up to 20 luminaires.
HEL.EM1 Self contained 1 hour emergency ready to mount directly to Holophane trunking
HEL.EM3 Self contained 3 hour emergency ready to mount directly to Holophane trunking
HEL.EMT Central battery powered emergency, mounted on trunking
HEL.PRO Infrared programming handset up to 7m
HEL.PRO.25 Infrared programming handset up to 25m
Code Trunking TRK.PI Power input for trunking
TRK.4M.7C Trunking 4.5m (4496mm) section 7-core (Trunking Infill to be ordered separately)
TRK.4M.11C Trunking 4.5m (4496mm) section 11-core (Trunking Infill to be ordered separately)
TRK.3M.7C Trunking 3.3m (3372mm) section 7-core (Trunking Infill to be ordered separately)
TRK.3M.11C Trunking 3.3m (3372mm) section 11-core (Trunking Infill to be ordered separately)
TRK.1M.7C Trunking 1.1m (1124mm) section 7-core (Trunking Infill to be ordered separately)
TRK.1M.11C Trunking 1.1m (1124mm) section 11-core (Trunking Infill to be ordered separately)
HEL.SUS Suspension kit (1m to 6m) - includes one suspension wire and fixing kit
TRK.TS T Joint for Prismaspace trunking
TRK.CS Corner Joint for IBH trunking
TRK.CX Cross Joint for IBH trunking
TRK.LJ Linear joint (requried to connect linear trunking sections together)
Code Infill bodies & panels TRK.INFILL.C1 Trunking infill (1686mm nominal length). White (RAL9016)
TRK.EP.C1 End plate for trunking. White (RAL9016). Required for the start and end of aisle
HEL.PIRA
Self Contained Emergency Option
Pub
licat
ion
No.
IB
H U
K 0
51
7
IHolophane Europe LimitedBond Avenue, Bletchley, Milton Keynes MK1 1JG United KingdomTelephone: +44 ( 0 ) 1908 649292 UK Fax: +44 ( 0 ) 1908 367618International Fax: +44 ( 0 ) 1908 363789E-mail: [email protected]
www.holophane.co.uk