-
• ``````
Custom made for your specific application - from 0.5-liter to
4000-Liters
IBCs for PharmaceuticalPowder Handling &
Blending
SERVOLiFT...We are the experts
SERVOLiFT35 Righter RoadRandolph, NJ 07869Ph: 973-442-7878 -
www.servo-lift.com
Typical IBC Sizes
FOODS
SERVOLIFT, your trusted one source supplied for IBCs and IBC
handling systems
COSMETICS
CHEMICALS
NUTRACEUTICALS
youronesource
Square & Rectangular IBCs
Round & Steep Funnel IBCs
Tablet Handling IBCs
Pilot & Research IBCs
The above sizes and configurations are just a sample of typical
IBCs that we produce. We can supply IBCs in any size, shape and
specification as your application may require.
We also produce IBCs in capacities from 0.5-liters+, which are
generally used for small production or research &
development.
TYPICAL SQUARE IBC SIZES
CAPACITY DIM A DIM B DIM C
600 49” 48” 48”
800 54” 48” 48”
1000 60” 48” 48”
1200 66” 48” 48”
1400 72” 48” 48”
1600 78” 48” 48”
1800 84” 48” 48”
2000 90” 48” 48”
2200 96” 48” 48”
2400 101” 48” 48”
2600 107” 48” 48”
2800 90” 54” 54”
3000 95” 54” 54”
TYPICAL ROUND IBC SIZES
CAPACITY DIM A DIM B
600 56” 48”
800 59” 48”
1000 65” 48”
1200 72” 48”
1400 78” 48”
1600 85” 48”
1800 91” 48”
2000 97” 48”
2200 104” 48”
Systems all around the IBC
IBC = Intermediate Bulk Container
-
100% CustomizableSERVOLiFT Experts in Process Handling &
Design Made to Suit your needs • ``````
Proven Designs - Scalable Systems - Unmatched ExperienceThe
Advantage:
Enhance quality control and streamline your process with
SERVOLIFT IBCs and related systems.
SERVOLIFT offers total flexibility by employing BOTH round and
square geometries. One of the greatest advantages of employing an
IBC system is the capability to blend your products directly in the
bin. This allows the bin blender to operate all day, unlike
conventional V and Double Cone blenders that require 5+ hours of
changeover time for cleaning. Furthermore, blending your products
in bins means that there is one less transfer of the product after
blending (as opposed to transferring into a container from your V
or Double Cone blender).
SERVOLIFT offers a whole host of configurations to suit every
product and process such as: blending baffles, removable bin
frames, casters, purge ports and high containment valves and
systems.
IBC Filling Systems Granulation Systems Blending Systems
Bio-Pharmaceuticals
Tableting & Packaging
SERVOLIFT IBCs are the finest you can purchase - fit finish and
quality are all world class. To offer our client’s the most
flexibility we have standards in all capacities ranging from
0.5-liters to 4000-liters in Round, Rectangular and Square
geometries. We also offer fully customized solutions for more
demanding applications such as high containment systems.
CORNERS: The corners of Servolift IBCs, whether 5-liters or
4000-liters are always made with a 2” radius. This large surface
bend allows for the easiest cleaning, insuring that cross
contamination is not caused by the IBC design.
Three views of corners, from left to right: 1. Fully buffed
corner; 2. strip polished corner, and 3. inside corner. As with the
outside, interior welds re ground smooth and flush to the sheeting
surface. Typically we certify the interior finish to Ra 15
micro-inch as standard. However, we can supply finishing to any
specification.
WELDING & FINISHING: Our welding is world class, which
allows for a perfect appearance after grinding and polishing
Our Standard Finishing: Far Left is an example of a vertical leg
meeting a horizontal frame. Center is a ground smooth body-seam
weld strip pol-ished to a RA 15 µ-inch and the right side is an
as-laid weld on a venting port at the top of the IBC.
MANWAYS AND PORTS: Servolift offers a complete line of Manways
& Ports for our IBCs. For the Pharmaceutical Industry we prefer
to use our lightweight stamped lid system which is not only easy to
remove and clean, but also weighs very little. Clamping is very
simple from our one-piece over-center clamping ring (no fighting
with the connection) and the clamp has an additional safety-tamper
lock.
Our manway rings come in several styles, how-ever, for
Pharmaceutical and other industries we offer a super clean fully
welded design which is perfectly fitted to the Bin top.
SERVOLIFT offers manway lids, from high sanitary design for
pharmaceutical products to lower cost yet very easy to clean
designs. Lids are available in the following sizes as standard:
4.7”, 5.9”, 7”, 9.8”, 12.4”, 15.75”, 17.7”, 19.7”, 22”, 23.6” and
28” other sizes are available also.
FRAMES: We specialize in making bin frames that are not only
robust and easy to clean, but also custom tailored to your mode of
handling. For example some customers require the bins to be used on
roller conveyor, others have special width docking stations and
some customers use AGV systems to move the IBCs around - for each
application we will build a different and correct frame system.
Our frames are made from totally enclosed tubing, we prefer
round vertical legs, however, we also offer square tubing. We use
FDA approved white plastic feet recessed into each leg so you
floors are not damaged during handling.
-
100% CustomizableSERVOLiFT Experts in Process Handling &
Design Made to Suit your needs • ``````
Proven Designs - Scalable Systems - Unmatched ExperienceThe
Advantage:
Enhance quality control and streamline your process with
SERVOLIFT IBCs and related systems.
SERVOLIFT offers total flexibility by employing BOTH round and
square geometries. One of the greatest advantages of employing an
IBC system is the capability to blend your products directly in the
bin. This allows the bin blender to operate all day, unlike
conventional V and Double Cone blenders that require 5+ hours of
changeover time for cleaning. Furthermore, blending your products
in bins means that there is one less transfer of the product after
blending (as opposed to transferring into a container from your V
or Double Cone blender).
SERVOLIFT offers a whole host of configurations to suit every
product and process such as: blending baffles, removable bin
frames, casters, purge ports and high containment valves and
systems.
IBC Filling Systems Granulation Systems Blending Systems
Bio-Pharmaceuticals
Tableting & Packaging
SERVOLIFT IBCs are the finest you can purchase - fit finish and
quality are all world class. To offer our client’s the most
flexibility we have standards in all capacities ranging from
0.5-liters to 4000-liters in Round, Rectangular and Square
geometries. We also offer fully customized solutions for more
demanding applications such as high containment systems.
CORNERS: The corners of Servolift IBCs, whether 5-liters or
4000-liters are always made with a 2” radius. This large surface
bend allows for the easiest cleaning, insuring that cross
contamination is not caused by the IBC design.
Three views of corners, from left to right: 1. Fully buffed
corner; 2. strip polished corner, and 3. inside corner. As with the
outside, interior welds re ground smooth and flush to the sheeting
surface. Typically we certify the interior finish to Ra 15
micro-inch as standard. However, we can supply finishing to any
specification.
WELDING & FINISHING: Our welding is world class, which
allows for a perfect appearance after grinding and polishing
Our Standard Finishing: Far Left is an example of a vertical leg
meeting a horizontal frame. Center is a ground smooth body-seam
weld strip pol-ished to a RA 15 µ-inch and the right side is an
as-laid weld on a venting port at the top of the IBC.
MANWAYS AND PORTS: Servolift offers a complete line of Manways
& Ports for our IBCs. For the Pharmaceutical Industry we prefer
to use our lightweight stamped lid system which is not only easy to
remove and clean, but also weighs very little. Clamping is very
simple from our one-piece over-center clamping ring (no fighting
with the connection) and the clamp has an additional safety-tamper
lock.
Our manway rings come in several styles, how-ever, for
Pharmaceutical and other industries we offer a super clean fully
welded design which is perfectly fitted to the Bin top.
SERVOLIFT offers manway lids, from high sanitary design for
pharmaceutical products to lower cost yet very easy to clean
designs. Lids are available in the following sizes as standard:
4.7”, 5.9”, 7”, 9.8”, 12.4”, 15.75”, 17.7”, 19.7”, 22”, 23.6” and
28” other sizes are available also.
FRAMES: We specialize in making bin frames that are not only
robust and easy to clean, but also custom tailored to your mode of
handling. For example some customers require the bins to be used on
roller conveyor, others have special width docking stations and
some customers use AGV systems to move the IBCs around - for each
application we will build a different and correct frame system.
Our frames are made from totally enclosed tubing, we prefer
round vertical legs, however, we also offer square tubing. We use
FDA approved white plastic feet recessed into each leg so you
floors are not damaged during handling.
-
• ``````
Custom made for your specific application - from 0.5-liter to
4000-Liters
IBCs for PharmaceuticalPowder Handling &
Blending
SERVOLiFT...We are the experts
SERVOLiFT35 Righter RoadRandolph, NJ 07869Ph: 973-442-7878 -
www.servo-lift.com
Typical IBC Sizes
FOODS
SERVOLIFT, your trusted one source supplied for IBCs and IBC
handling systems
COSMETICS
CHEMICALS
NUTRACEUTICALS
youronesource
Square & Rectangular IBCs
Round & Steep Funnel IBCs
Tablet Handling IBCs
Pilot & Research IBCs
The above sizes and configurations are just a sample of typical
IBCs that we produce. We can supply IBCs in any size, shape and
specification as your application may require.
We also produce IBCs in capacities from 0.5-liters+, which are
generally used for small production or research &
development.
TYPICAL SQUARE IBC SIZES
CAPACITY DIM A DIM B DIM C
600 49” 48” 48”
800 54” 48” 48”
1000 60” 48” 48”
1200 66” 48” 48”
1400 72” 48” 48”
1600 78” 48” 48”
1800 84” 48” 48”
2000 90” 48” 48”
2200 96” 48” 48”
2400 101” 48” 48”
2600 107” 48” 48”
2800 90” 54” 54”
3000 95” 54” 54”
TYPICAL ROUND IBC SIZES
CAPACITY DIM A DIM B
600 56” 48”
800 59” 48”
1000 65” 48”
1200 72” 48”
1400 78” 48”
1600 85” 48”
1800 91” 48”
2000 97” 48”
2200 104” 48”
Systems all around the IBC
IBC = Intermediate Bulk Container
-
100% CustomizableSERVOLiFT Experts in Process Handling &
Design Made to Suit your needs • ``````
Proven Designs - Scalable Systems - Unmatched ExperienceThe
Advantage:
Enhance quality control and streamline your process with
SERVOLIFT IBCs and related systems.
SERVOLIFT offers total flexibility by employing BOTH round and
square geometries. One of the greatest advantages of employing an
IBC system is the capability to blend your products directly in the
bin. This allows the bin blender to operate all day, unlike
conventional V and Double Cone blenders that require 5+ hours of
changeover time for cleaning. Furthermore, blending your products
in bins means that there is one less transfer of the product after
blending (as opposed to transferring into a container from your V
or Double Cone blender).
SERVOLIFT offers a whole host of configurations to suit every
product and process such as: blending baffles, removable bin
frames, casters, purge ports and high containment valves and
systems.
IBC Filling Systems Granulation Systems Blending Systems
Bio-Pharmaceuticals
Tableting & Packaging
SERVOLIFT IBCs are the finest you can purchase - fit finish and
quality are all world class. To offer our client’s the most
flexibility we have standards in all capacities ranging from
0.5-liters to 4000-liters in Round, Rectangular and Square
geometries. We also offer fully customized solutions for more
demanding applications such as high containment systems.
CORNERS: The corners of Servolift IBCs, whether 5-liters or
4000-liters are always made with a 2” radius. This large surface
bend allows for the easiest cleaning, insuring that cross
contamination is not caused by the IBC design.
Three views of corners, from left to right: 1. Fully buffed
corner; 2. strip polished corner, and 3. inside corner. As with the
outside, interior welds re ground smooth and flush to the sheeting
surface. Typically we certify the interior finish to Ra 15
micro-inch as standard. However, we can supply finishing to any
specification.
WELDING & FINISHING: Our welding is world class, which
allows for a perfect appearance after grinding and polishing
Our Standard Finishing: Far Left is an example of a vertical leg
meeting a horizontal frame. Center is a ground smooth body-seam
weld strip pol-ished to a RA 15 µ-inch and the right side is an
as-laid weld on a venting port at the top of the IBC.
MANWAYS AND PORTS: Servolift offers a complete line of Manways
& Ports for our IBCs. For the Pharmaceutical Industry we prefer
to use our lightweight stamped lid system which is not only easy to
remove and clean, but also weighs very little. Clamping is very
simple from our one-piece over-center clamping ring (no fighting
with the connection) and the clamp has an additional safety-tamper
lock.
Our manway rings come in several styles, how-ever, for
Pharmaceutical and other industries we offer a super clean fully
welded design which is perfectly fitted to the Bin top.
SERVOLIFT offers manway lids, from high sanitary design for
pharmaceutical products to lower cost yet very easy to clean
designs. Lids are available in the following sizes as standard:
4.7”, 5.9”, 7”, 9.8”, 12.4”, 15.75”, 17.7”, 19.7”, 22”, 23.6” and
28” other sizes are available also.
FRAMES: We specialize in making bin frames that are not only
robust and easy to clean, but also custom tailored to your mode of
handling. For example some customers require the bins to be used on
roller conveyor, others have special width docking stations and
some customers use AGV systems to move the IBCs around - for each
application we will build a different and correct frame system.
Our frames are made from totally enclosed tubing, we prefer
round vertical legs, however, we also offer square tubing. We use
FDA approved white plastic feet recessed into each leg so you
floors are not damaged during handling.