-
WWW.FLUIDTROL.COM 888-551-0511
FLUIDTROL PROCESS TECHNOLOGIES, INC. 3460 STANWOOD BLVD
HUNTSVILLE, AL 35811 1
Type C Sand FilterType C Sand Filterface piping optionsface
piping options
PNInlet/Outlet
Length (inch)
A
FilterArea
(ft^2)
Flow20 gpm/ft^2 (GPM)
DP(psi)
FPT-HSF42H72C 6 76 3/4 19.8 395 3 1/2
FPT-HSF42H96C 6 100 3/4 26.8 535 3 1/2
FPT-HSF42H120C 6 124 3/4 33.8 675 3 1/2
FPT-HSF42H144C 6 148 3/4 40.8 815 3 1/2
7/13/20
SINGLE TANK FACE PIPING OPTION
STACKED TANK FACE PIPING OPTION
AA
8-5/88-5/8
20-1/1620-1/16 11-7/16
22-1/16
4949 28-5/828-5/8
8-5/88-5/8
28-5/828-5/8
20-1/1620-1/16 11-7/16
100-13/16100-13/16
40-1/840-1/8
-
WWW.FLUIDTROL.COM 888-551-0511
FLUIDTROL PROCESS TECHNOLOGIES, INC. 3460 STANWOOD BLVD
HUNTSVILLE, AL 35811 2
Type C Sand FilterType C Sand Filterface piping optionsface
piping options
MULTIPLE TANK SIDE BY SIDE
FACE PIPING OPTION
Filter PNInlet/Outlet
Length (inch)
A
DuplexFilterArea
(ft^2)
DuplexFlow
20 gpm/ft^2 (GPM)
FilterDP
(psi)
FPT-HSF42H72C 6 76 3/4 39.6 790 3 1/2
FPT-HSF42H96C 6 100 3/4 53.6 1070 3 1/2
FPT-HSF42H120C 6 124 3/4 67.6 1350 3 1/2
FPT-HSF42H144C 6 148 3/4 81.6 1630 3 1/2
AA
20-11/1620-11/16101-1/16
18
20-5/820-5/8
18-5/818-5/88-5/88-5/8
60
7/13/20
The Type C Filter face piping illustrated here minimizes the
number of elbows and valves. All filters are backwashed
together.
The pressure drop provided in the table is for the filter only.
The pressure drop across the face piping will depend on selected
valves, pipe size, and fittings.
The dimensions to the left and data in the table below assumes
two filters.
If the manway is desired to be fabricated on the opposite side
please contact Fluidtrol.
-
WWW.FLUIDTROL.COM 888-551-0511
FLUIDTROL PROCESS TECHNOLOGIES, INC. 3460 STANWOOD BLVD
HUNTSVILLE, AL 35811 3
Type A Sand FilterType A Sand Filterface piping optionsface
piping options
This Type A Filter should accommodate off the shelf multi-port
valves. If those valves are not desired standard butterfly valves
can be used as shown below.
The pressure drop provided in the table is for the filter only.
The pressure drop across the face piping will depend on selected
valves, pipe size, and fittings.
Filter PNInlet/Outlet
Length (inch)
A
Length (inch)
B
Length (inch)
C
FilterArea
(ft^2)
Flow20 gpm/ft^2 (GPM)
FilterDP
(psi)
FPT-HSF42H72A 6 77 3/4 34 3/4 36 1/4 19.8 395 3 1/2
FPT-HSF42H96A 6 101 3/4 58 3/4 48 1/4 26.8 535 3 1/2
FPT-HSF42H120A 6 125 3/4 82 3/4 60 1/4 33.8 675 3 1/2
FPT-HSF42H144A 6 149 3/4 106 3/4 72 1/4 40.8 815 3 1/2
22-1/1622-1/16
51-1/851-1/8
CC17-1/817-1/82-7/82-7/8
62-5/862-5/8
AABB
SINGLE TANK FACE PIPING OPTION
7/13/20
-
WWW.FLUIDTROL.COM 888-551-0511
FLUIDTROL PROCESS TECHNOLOGIES, INC. 3460 STANWOOD BLVD
HUNTSVILLE, AL 35811 4
Type B Sand FilterType B Sand Filterface piping optionsface
piping options
30-11/1630-11/16
20-1/420-1/4
28-3/428-3/4
AABB
Filter PNInlet/Outlet
Length (inch)
A
Length (inch)
B
FilterArea
(ft^2)
Flow20 gpm/ft^2 (GPM)
FilterDP
(psi)
FPT-HSF42H72B 6 82 3/4 34 3/4 19.8 395 3 1/2
FPT-HSF42H96B 6 106 3/4 58 3/4 26.8 535 3 1/2
FPT-HSF42H120B 6 130 3/4 82 3/4 33.8 675 3 1/2
FPT-HSF42H144B 6 154 3/4 106 3/4 40.8 815 3 1/2
SINGLE TANK FACE PIPING OPTION
8-5/88-5/8
20-1/1620-1/16 8-5/88-5/829-1/829-1/8
37-7/837-7/8
Type B Filters facilitate piping the pump and backwash line on
opposite side as the pool line. This configuration will have lower
face pipping pressure drop during filtration mode because there are
fewer elbows for the water to flow through.
The pressure drop provided in the table is for the filter only.
The pressure drop across the face piping will depend on selected
valves, pipe size, and fittings.
7/13/20