TWINNER 269
Built for workshop use
Very simple handling
Use without preliminary knowledge
No user’s influence thanks to a constant measuring force
Excellent repeatability
Very fast change of part
Easy calibration
Complete selection of accessories
TWINNER
TWINNER® is a universal instrument for the measurement of cylinder-shaped parts, which replaces a great number of conventional instru-ments in the workshop. This measuring centre, multifunctional, flexible and mobile allows to measure and document practically all that is manufactured by turning.
This instrument has been specifically developed for the workshop and lends itself perfectly to a use in production, close by the machining centre.
TWINNER® allows the quality control of sole parts as well as that of small batches. Other areas of use are the control and acceptation of machine tool. All revolution parts can be preci-sely measured, without adjustment necessary. The range of parts that can be measured spreads over typical turning parts, such as axles, gear-box shafts, camshafts, crankshafts, transmission shafts, joints and revolving parts, to parts with very elaborate geometry.
TWINNER® is available in the following dimen-sions : lengths of 400, 800, 1200 and 2000 mm and diameters of 125 or 160 mm. The manual use and control of the TWINNER are generally performed by means of a 2-axis display unit (dia-meter and length). For better comfort and more functionalities, the TWINNER can be equipped with a PC with TWINNER soft.
PREsENTATION
270 271
TWINNERdEsCRIPTION
Rotation unit (with or without motor or encoder)
Centring pike
Length
Diameter on odd division
Diameter of recess
Internal depth
Concentricity
Axial run-out to part axis
Eccentricity
Radial run-out to part axis
Pitch
External diameter
Width of Internal recess
Width of chamfer
Angle of taper
Axial run-out
Position
Eccentricity to part axis
Point of intersection
Shoulder
Width of external recess
Internal distance
Coaxiality
Interrupted axial run-out
Radius
Interrupted eccentricity
Angular pitch
Length measuring module
Diameter measuring module
Display unit(QuadraChek or PC)
270 271
TWINNERdIsPLAYs/sOFTWAREs
2 display units are available :The use and control of the TWINNER is generally made by means of a 2-axis display unit (diameter and length).
Quadra-Chek
Linear measuring system, min./max.
Digital display
Zero setting/Preset
Commutation and classification signals
Display initialization by external signal
RS232 data output
For better comfort and more functionalities, the TWINNER can be equipped with a PC with TWINNER soft. This modern sPC system offers unbeatable value for money. Its flexibility makes it adaptable to the most diverse measuring situations.
PC
PC with TWINNER Soft
Touch screen
Size 15‘‘
1024 x 768 resolution
Measurement guided by program
Q-DAS data base in ASCII format
Optical module
272 273
TWINNERdIsPLAYs/sOFTWAREs
TWINNER SoftFrom drawing to measuring sequence with a simple click
Use of program adapted to the workshop
Measuring graphical help
Measuring macros
Freely configurable views
Reports and measurement graphs
Modern and convenient SPC system
Functions administration by users and passwords
Recording of results in ASCII format in Q-DAS
TWINNER soft considerably reduces the programming time of a measuring sequence and allows a rational use of the instrument.
Numerous functions are integrated into the software :- Freely configurable masks, reports and graphs- Administration of functions by users and passwords- Recording of results in AsCII format in Q-dAs
272 273
75
459
/ 630
784 / 1204 / 1744 / 2584
249
/ 370
350 / 508452 / 600
TWINNERTECHNICAL sPECIFICATIONs
1) Values valid at temperature of 20±0.5°C and relative humidity of 50±5%.
dIAgRAm
TWINNER
Measuring range, length X mm(in)
Measuring range, diameter Y mm(in)
Max. permissible errors, length X 1) µm
Max. permissible errors, diameter Y 1) µm
Repeatability, length X (2s) 1) µm
Repeatability, diameter Y 1) µm
Resolution, length X mm(in)
Resolution, diameter Y mm(in)
Measuring force, length and diameter N
Electrical connections
Max. part weight kg
Weight (instrument) kg
Instrument manufactured according to specifications
Set of tools
Cleaning set
The Twinner instruments are supplied as follows :
User’s instructions
Control certificate
Conformity statement
sTANdARd INsTRumENT
T4
400 (15)
125 (5)
120
3 + L (mm) / 100
1.5 + D (mm) / 100
≤ 2.0
≤ 1.0
0.001 / 0.0001
0.001 / 0.0001
2.0
230V / 50Hz, 0.2 kVA
10 / 20 / 100
T8
800 (31)
140
T12
1200 (47)
125/160 (5/6)
180
T20
2000 (78)
240
274 275
700 215 10 01
700 215 10 02
700 215 20 01
700 215 20 02
Twinner T4, package, Quadra-Chek QC 120
Twinner T4, package, PC, Twinner Soft
Twinner T8, package, Quadra-Chek QC 120
Twinner T8, package, PC, Twinner Soft
TWINNERCOdE NumbER
sPECIFIC mOdELs
Trimos offers specific solutions adapted to all applications for measurement of cylinder-shaped parts and Revolving parts. For more information, your local Trimos agent remains at your disposal.
Instrument specially manufactured for long shafts measurements
universal measuring machine
All packages are delivered with accessories marked with *, page 277-280
700 215 30 01
700 215 30 02
700 215 40 00
Twinner T12, package, Quadra-Chek QC 120
Twinner T12, package, PC, Twinner Soft
Twinner T20 (on request)
CONCEPT
Part adapters / holders
Measuring modules
Accessories
Display units
274 275
TWINNERAPPLICATIONs
Diameter measurement in a groove
Length measurement
Length measurement for large parts (specific construction)
Positions measurement
Optical measurement of the characteristics of a camshaft
Diameter measurement on a camshaft
Centerline measurement
Measurement of rack rail teeth inclination
Installation for excentric diameter measure-ment (specific construction)
276 277
Twinner
Twin
ner
ACCEssORIEs
295 953322 001
295 953322 002
275 953322 201
275 953322 202
275 953322 203
279 953322 251
279 953322 252
279 953322 253
279 953322 254
275 953322 204
279 953322 241
279 953322 255
279 953322 256
Support for screen Twinner Cable CH
Support for screen Twinner Cable DE
Diameter measuring module D=125, 1 meas. Syst., without probe *
Diameter measuring module D=125, 2 meas. Syst., without probe
Diameter measuring module D=160, 2 meas. Syst., without probe
Probe measure D − HM knive *
Measuring probe D− HM − Flat
Probe to measure D − HM − knive L=53
Measuring probe D − HM − knive − thickness=4
Length measuring module, without probe *
Probing axis type E
Measuring probe L type E *
Measuring probe L, free positioning 0.75
276 277
Twinner
Twin
ner
ACCEssORIEs
279 953322 257
279 953322 258
279 953322 261
249 953322 001
249 953322 002
249 953322 003
249 953322 004
249 953322 006
249 953322 005
249 953322 201
271 953322 251
239 953322 251
Measuring probe L with ball D=3.5
Measuring probe L, fork
Adjustable ring M 2.5
Manual location centers, fixed, 10 Kg *
Manual location centers, fixed, 20 Kg
Manuel location centers, fixed, 100 Kg
Fixed location centers 20 Kg *
Duo location center
Fixed location centers 100 Kg
Uni−rotating system empty
Encodeur for rotating system
Handle for universal rotating system
278 279
Twinner
Twin
ner
ACCEssORIEs
238 953322 251
249 953322 051
249 953322 052
249 953322 053
249 953322 054
249 953322 055
249 953322 056
249 953322 057
249 953322 058
249 953322 059
249 953322 060
249 953322 061
Drive system for universal rotation system
Rotary anvil 60°, D=18
Rotating location center 60°, D=18 mm XN−2
Rotating location 60°, D=18 mm HM
Rotary location center 60°, D=17/70 mm
Location center 60°, D=18 mm Long *
Fixed location centers 60°, D=18 mm long
Location center with hole 60°, D=30/60 mm
Location center with ball D=9.525 mm
Location center with ball
Location center 60 ° D=29 mm with reference ring D=39 mm L=6 mm
Fixed location center 52° D=29 mm with reference ring D=39 mm L=6 mm
278 279
Twinner
Twin
ner
ACCEssORIEs
286 953322 001
249 953322 101
249 953322 102
249 953322 103
249 953322 104
249 953322 105
351 201 1002
351 201 1003
352 0032
352 0029
352 0030
352 0031
352 0035
T groove protection *
V support width = 30 mm
V supports width = 18 mm
Adjustable V D=18 mm−60mm
Adjustable V D=20 mm − 70 mm
Adjustable V D=18 mm−D=100 mm
Display unit Quadra−check QC120 (2 axis) for Twinner standard foot
Display unit Quadra−check QC130 (3 axis) for Twinner standard foot
T−CAM package − PC Twinner
PC−System 130, PC Twinner 3 measuring axis TFT screen
PC−System 130, PC Twinner 3 measuring axis touch screen
PC−System 150, PC Twinner 5 measuring axis touch screen
PC−System 160, PC Twinner 6 measuring axis touch screen
* Standard delivered accessories with instrument packages (see page 275)
280